Any guide to root the device Haipai x720D and i have seen different ways of doing it but a lot of them are in another language or appear not to be really trusty so i am afraid of trying any of them and end up with a brick..
View 9 Replies
I've used SP Flash tool to replace rom, and accidently pressed "Format" instead of "Download".
now, the phone recognizes the SIM card, but could not connect to mobile network at all! also, on engineer menu, I go to Radio Information and it doesn't display my phone number. and there's a "gsm service: out of service".
I've managed to restore my IMEI using MTK6575 Imei Restore tool. but still it doesn't work
I stuck with the HAIPAI i9377 android 4.1.1 without any guide for root + gps dont work.
View 1 Replies View RelatedI have MobileUncle Tooll (granted SuperUser) and ROM Manager (granted SuperUser) installed on my Goophone I5 MTK6577 BUT I still CANNOT bypass Android Recovery 3E to install the goo.zip ROM -
View 9 Replies View RelatedHow-to root a Star 001s phone?
It's a new one with the MTK6577 chipset from china.
I can not get my rooter Haipai 7102, however edsoedso has succeeded. URL....I used version 18 of Bin4ry on Linux and windows, same result.That's what I did:
../sudo ./adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
0123456789ABCDEFG device
[code]....
I have bricked my phone, and it now can't turn on..
I have a backup of the software(My friend gived me it), but when i put it in SP Flash Tool, i see only the red bar, then the program don't flash anything..
My computer see the phone as "MTK USB Port (COM6)".. Is this the problem maybe?
the last week i've flashed a new rom on my Haipai i9377 and the screen now it's totally white with a coloured pixel on the screen. i've tryed to flash another rom, but i don't know why the problem is not solved. When i switch on the phone, i can hear the sounds, but without a working screen, i can't use the phone. in attachment you'll find a photo of the screen.
View 3 Replies View RelatedI have recently purchased two HDC Galaxy S4 EX phones which have the MTK6589T 1.5GHz CPU and 2GB RAM/32GB ROM.I have been trying to get a CWM Recovery installed on it as well as rooting it but so far I have had no luck at all.
Firstly, I tried using MTK Droid Tools to modify a dump of my ROM and uploaded the recovery back to the phone using this procedure: URL....I did this by dumping the ROM off phone 1 (which I was avoiding starting up until I had a stock ROM backup) while I was playing around with phone 2. Phone 2 was booting into recovery mode by holding VolumeUp + Power and booting into a chinese factory mode by holding VolumeDown + Power. The recovery mode was very basic and did not have CWM.
I dumped the ROM from phone 1 with SP tools, created a modified recovery image with MTK Droid Tools and downloaded that to phone 2. I could not load either recovery mode or factory mode any more. No matter what key combination I tried the phone would just boot normally. I flashed back the unmodified recovery image and had the exact same problem. It wasn't until some time later I tried booting phone 1 and found it did not boot into recovery mode at all either . Unfortunately I only dumped the ROM from phone 1 and not phone 2 so I don't have a copy of the recovery image that seemed to boot ok on phone 2
So anyway, I have tried flashing a whole heap of recovery images from all sorts of HDC S4 sources but I have never been able to boot into any form of recovery mode with any of them. They ALWAYS just boot normally using either volume up or volume down. I'm not sure if that is because all of the images are for the 1.2GHz CPU instead of the 1.5GHz CPU.
The second problem is that I cannot root this phone at all.I have tried the motochopper exploit which seems to be the only root option I have found for these phones (there are lots of options but they all appear to be the same tool).When I run that root tool it copies the pwn, su and busybox to the phone fine but whenever it runs the pwn script it just comes up saying "Failure" without any explanation why.The same thing happens when I try to use the root option with MTK Droid Tools.So I'm at quite a loss right now, I can't get a CWM recovery image working and I can't get root....
I've tried flashing some of the HDC S4 ROMs but so far none of them have booted (I'm guessing because it is the MTK6589T model?).The only option I have had is to flash back my original ROM dump.
Is there any way to alter a recovery image to change the boot keys it uses?Are the boot keys even defined in the recovery image? is it maybe something else like the preloader or boot image I should be trying to change?I can't wait to start customizing my own ROM for this phone...
How to make custom rom from this cpu MT6577(STARMOBILE ASTRA). If it is same to procedure like samsung andriod..?
Divide into... kernel, rom, gapps..? I have a back up this rom from SP flash tool..
Rooting and clockworkmod recovery.
View 9 Replies View Relatedjust I want to know is it possible to flash recovery IMG without root access ?
View 1 Replies View RelatedCan i develop an app (apk) that reboot android in recovery without root? I have possibility to add to push my apk in /system/app/
View 3 Replies View RelatedNot so long ago I flashed a custom rooted ROM. After this I realized that I forgot to save some important app configs (im history, notes). As far as I know, Android uses ext4 filesystem on its root partition. Is there a way to perform undelete or any other method to try to recover deleted files? Searching the forums gives some results of repairing data on internal storage, but I guess the user data space is meant, not the root. My device is Huawei U8850 Vision, Android version 4.1.2.
View 2 Replies View RelatedNow I have G-tide E77 Chinese android mobile
How I can root it and flash cwm recovery ...
I ported rom from OPPO R817T for Lenovo A390 and everything is working, except the issue of 3G data. I have to replace from stock rom and the signal was already out . but in setting can not be set 3G Data and every time I make a call * 123 # signal is lost and changed to "no sim card".
View 9 Replies View RelatedHow to port JB rom to MTK6577 ICS Device.......
My device is Micromax A90s, which are similar to micromax A110 and A110 have more then 2-3 Jelly Bean ROM but we dont have any Jelly Bean ROM so i have to port it, but dont know about porting methods
I already make Custom ROM for my device but don't know about porting. Can I able to port A110 JB ROM in to my Devices.....??
A90s specifications
MTK6577 1 GHz Processor
512 MB RAM
Super Amoled 4.3' HDPI (480x800) Resolution which are only things not matched to A110..........
How to port JB ROM in A90s
Cuz A110 QHD and A90s is HDPI so m able to port it........or not...........?? Or I have one more similar device rom which are same screen resolution and camera and all other things but its hardware is different cuz its Qualcomm MSM7627a Device but screen resolution are same HDPI, so can i able to port that ROM in my A90s ........??
I have a clone Samsung Galaxy Note II N7102,
That's chip MTK 6577, but I can't load the rom on it.
The error message is firmware & chip set not match.
So I followed the tutorial found here: Samsung Galaxy S2 GT-I9100G: How to root on Android 2.3.6 Gingerbread and install ClockworkMod Recovery
I did option #1 and set up my device, and the program said the phone was set up. Now every time I turn my phone on a boot screen comes up with a yellow triangle with a yellow ! in the middle.
I can't go the the special boot (where you hold up, down, and power) and I can't do anything at all.
How can I reset my phone?
how rooting works. I read that stock recovery doesn't let us flash packages not signed by the manufacturer, and that's the reason for custom recoveries (they don't check). So my question is how do we get recovery to flash the root package in the first place? Or is it the fact that I have a Samsung with an unlocked boot loader?
View 2 Replies View RelatedMy 9300+ (chinese mtk6577) is dead... I have to updated wrong firmware and my phone will don't turn ON again, when I use the SP Flash Tool appears the message: "Firmware Upgrade could not be executed without PMT. Please "Download" ONLY first to create PMT on the target!
My internal partition is corrupted and i can't create PMT because my phone don't Turn On, but my USB is recognized by windows.
I'm desperately trying to install a new recovery to install new rom, the phone will not turn on anymore, when I connect it is not detected (with the usual beeping sound on your computer).
I found online a full backup of a MTK6577 (boot.img, preloads, logo, recovery, etc.) I put all these files and made the procedure of flash with the software flash tools, the operation is completed I came out the green circle all that went well, but the phone will not turn on anymore.
The only strange thing is that I can load it with the power supply, this is because I use a cable that makes you see when you are charge(see attached file),this when there is no charging source will turn off automatically.
I have buyed this phone by this store: ([URL]...), I tried to apply for a refund, but they are gone (as usual)
I tried to click on the back button (reset), but there is no button on the inside.
Any possibility of recovery in some way, even opening the phone, otherwise they are thrown money.
Ok, I just bought an HTC Acquire with Android Version 2.3.4 HTC Sense 3.0 Software number 1.26.557.9 Kernel 2.6.35.10
When I reboot it into recovery mode it says:
***Locked***
Kingdom PVT SHIP S-ON
HBOOT-1.22.0000
RADIO-1.11.00.0903
eMMC-boot
Aug 8 2011
I have tried to root this phone using Gingerbreak, Revolutionary, Z4root, and a few others. When I search on Google or the XDA website I can't find absolutely anything about an HTC Acquire. It's like the internet thinks the phone doesn't exist? I recently upgraded to it from my HTC Desire CDMA Bravo-c that I had rooted, flashed a custom rom, custom kernel, custom radio, the works.
My phone wont boot into android because of a bad setting I made in pimp my rom, it only boots into recovery now. So what I need to do is sort files modified by a certain date and time (last night) and restore them with originals hoepfully to get my phone to boot back up.
So how do I navigate and search my root directory through 4ext recovery or bootloader, because those are my only options?
Is there a way to mount these directories and browse them through windows as if it were an actual folder so I can use windows 7's build in search features as well? I have android commander installed and can use that if need be.
how to exactly approach this without installing my rom back over again.
i bought a mtk6577 clone s3. My problem is sometimes i rebooted phone, after opening proximity and light sensor doesn't work. screen don't turn off in call and doesn't call the person displayed on screen when i take ear. And battery drains too much. (example: when proximity and light sensor works with %90 battery, when it doesn't work after reboot plummets to %50).Another issue is when i reboot phone, boot animation doesn't show when proximity and light sensors don't work.
View 2 Replies View RelatedI have Sharp SH837W, when I try to install CWM, I wrote it to address 0x0 and it is bricked. I know I write something over its Preloader.
I tried but can't write down preloader again.
I tried to find TestPoint, maybe I found it but I don't know what should I do with it. I connect the test point with USB -5v and connect cable but still can't write anything (I got error 5054 in SP Flash Tool).
How to make the following phone's magnetic and orientation sensor working? Both of these sensors are not working on my phone (verified by many apps such as Z-deviceTest, AndroSensor and Android Sensor Box).
Various applications have shown that this phone has 5 sensors :
- yamaha530 Orientation Sensor : 0.25 mA by Aichi Steel
- yamaha530 3-axis Magnetic Field Sensor :0.25 mA by Aichi Steel
- bma222 3-axis Accelerometer : 0.13 mA by The Android Open Source Project
- tmd2771 Proximity Sensor : 0.13 mA by Capella
- tmd2771 Light Sensor : 0.13 mA by Capella
Phone name : Clone Samsung Galaxy III S9300
Manufacturer : alps
Model: e1901_v77_jbl1_9p017
CPU: MTK6577 Dual Core 1.0GHz
Android version : 4.1.1
Baseband version : MAUI.11AMD.W12.22.SP.V15,2012/10/08 20:09
Kernel version : 3.4.0 (root @ abc-desktop) #1 SMP PREEMPT Mon Nov 12 18:32:14 CST 2012
Build Number : e1901_v77_jbl1_9p017_20121105
Perhaps there is new ROM or kernal that can handle the sensors better?
I have tried with so many SPMDT versions to change the display driver of my Alps Note 2., which has MTK6577 Chipset. But in all those tools., can't change the drivers., when click unlock., there are nothing to select., all the values are NULL..
Here I have attached some screen shots..
I just bought this phone three weeks ago and It was working well .. then I tried an App (pimp my rom) and I forgot to enable Usb Debugging mode so I restarted phone then Found a message ( Unfortunately, Launcher has stopped ) and when I press ok it shows again .. I can only switch on/off wifi bluetooth GPS and those stuff on Notification bar but I cant enable Usb debugging mode because settings crash with ( Unfortunately, Settings has stopped ) No menu No home screen .. only those messages with a useless notification bar I tried everything possible to recover this phone but failed because The computer cant define the device because of the Debugging mode and when I try to flash a rom by recovery mod it tells me signature failed Is there anything I can do for this phone? or its over?
View 4 Replies View RelatedI got a rooted device installed clockworkmod recovery. just wondering if I do a factory reset in clockworkmod recovery will i loose root? Im using super su. If i do a factory reset from the phone when it's on super su and root still remain. Thats what i want.
View 1 Replies View Related