I ported rom from OPPO R817T for Lenovo A390 and everything is working, except the issue of 3G data. I have to replace from stock rom and the signal was already out . but in setting can not be set 3G Data and every time I make a call * 123 # signal is lost and changed to "no sim card".
View 9 Replies
How to make custom rom from this cpu MT6577(STARMOBILE ASTRA). If it is same to procedure like samsung andriod..?
Divide into... kernel, rom, gapps..? I have a back up this rom from SP flash tool..
How to port JB rom to MTK6577 ICS Device.......
My device is Micromax A90s, which are similar to micromax A110 and A110 have more then 2-3 Jelly Bean ROM but we dont have any Jelly Bean ROM so i have to port it, but dont know about porting methods
I already make Custom ROM for my device but don't know about porting. Can I able to port A110 JB ROM in to my Devices.....??
A90s specifications
MTK6577 1 GHz Processor
512 MB RAM
Super Amoled 4.3' HDPI (480x800) Resolution which are only things not matched to A110..........
How to port JB ROM in A90s
Cuz A110 QHD and A90s is HDPI so m able to port it........or not...........?? Or I have one more similar device rom which are same screen resolution and camera and all other things but its hardware is different cuz its Qualcomm MSM7627a Device but screen resolution are same HDPI, so can i able to port that ROM in my A90s ........??
I have a clone Samsung Galaxy Note II N7102,
That's chip MTK 6577, but I can't load the rom on it.
The error message is firmware & chip set not match.
My 9300+ (chinese mtk6577) is dead... I have to updated wrong firmware and my phone will don't turn ON again, when I use the SP Flash Tool appears the message: "Firmware Upgrade could not be executed without PMT. Please "Download" ONLY first to create PMT on the target!
My internal partition is corrupted and i can't create PMT because my phone don't Turn On, but my USB is recognized by windows.
I'm desperately trying to install a new recovery to install new rom, the phone will not turn on anymore, when I connect it is not detected (with the usual beeping sound on your computer).
I found online a full backup of a MTK6577 (boot.img, preloads, logo, recovery, etc.) I put all these files and made the procedure of flash with the software flash tools, the operation is completed I came out the green circle all that went well, but the phone will not turn on anymore.
The only strange thing is that I can load it with the power supply, this is because I use a cable that makes you see when you are charge(see attached file),this when there is no charging source will turn off automatically.
I have buyed this phone by this store: ([URL]...), I tried to apply for a refund, but they are gone (as usual)
I tried to click on the back button (reset), but there is no button on the inside.
Any possibility of recovery in some way, even opening the phone, otherwise they are thrown money.
i bought a mtk6577 clone s3. My problem is sometimes i rebooted phone, after opening proximity and light sensor doesn't work. screen don't turn off in call and doesn't call the person displayed on screen when i take ear. And battery drains too much. (example: when proximity and light sensor works with %90 battery, when it doesn't work after reboot plummets to %50).Another issue is when i reboot phone, boot animation doesn't show when proximity and light sensors don't work.
View 2 Replies View RelatedI have Sharp SH837W, when I try to install CWM, I wrote it to address 0x0 and it is bricked. I know I write something over its Preloader.
I tried but can't write down preloader again.
I tried to find TestPoint, maybe I found it but I don't know what should I do with it. I connect the test point with USB -5v and connect cable but still can't write anything (I got error 5054 in SP Flash Tool).
Any guide to root the device Haipai x720D and i have seen different ways of doing it but a lot of them are in another language or appear not to be really trusty so i am afraid of trying any of them and end up with a brick..
View 9 Replies View RelatedHow to make the following phone's magnetic and orientation sensor working? Both of these sensors are not working on my phone (verified by many apps such as Z-deviceTest, AndroSensor and Android Sensor Box).
Various applications have shown that this phone has 5 sensors :
- yamaha530 Orientation Sensor : 0.25 mA by Aichi Steel
- yamaha530 3-axis Magnetic Field Sensor :0.25 mA by Aichi Steel
- bma222 3-axis Accelerometer : 0.13 mA by The Android Open Source Project
- tmd2771 Proximity Sensor : 0.13 mA by Capella
- tmd2771 Light Sensor : 0.13 mA by Capella
Phone name : Clone Samsung Galaxy III S9300
Manufacturer : alps
Model: e1901_v77_jbl1_9p017
CPU: MTK6577 Dual Core 1.0GHz
Android version : 4.1.1
Baseband version : MAUI.11AMD.W12.22.SP.V15,2012/10/08 20:09
Kernel version : 3.4.0 (root @ abc-desktop) #1 SMP PREEMPT Mon Nov 12 18:32:14 CST 2012
Build Number : e1901_v77_jbl1_9p017_20121105
Perhaps there is new ROM or kernal that can handle the sensors better?
I have MobileUncle Tooll (granted SuperUser) and ROM Manager (granted SuperUser) installed on my Goophone I5 MTK6577 BUT I still CANNOT bypass Android Recovery 3E to install the goo.zip ROM -
View 9 Replies View RelatedI have tried with so many SPMDT versions to change the display driver of my Alps Note 2., which has MTK6577 Chipset. But in all those tools., can't change the drivers., when click unlock., there are nothing to select., all the values are NULL..
Here I have attached some screen shots..
I just bought this phone three weeks ago and It was working well .. then I tried an App (pimp my rom) and I forgot to enable Usb Debugging mode so I restarted phone then Found a message ( Unfortunately, Launcher has stopped ) and when I press ok it shows again .. I can only switch on/off wifi bluetooth GPS and those stuff on Notification bar but I cant enable Usb debugging mode because settings crash with ( Unfortunately, Settings has stopped ) No menu No home screen .. only those messages with a useless notification bar I tried everything possible to recover this phone but failed because The computer cant define the device because of the Debugging mode and when I try to flash a rom by recovery mod it tells me signature failed Is there anything I can do for this phone? or its over?
View 4 Replies View RelatedHow-to root a Star 001s phone?
It's a new one with the MTK6577 chipset from china.
I've used SP Flash tool to replace rom, and accidently pressed "Format" instead of "Download".
now, the phone recognizes the SIM card, but could not connect to mobile network at all! also, on engineer menu, I go to Radio Information and it doesn't display my phone number. and there's a "gsm service: out of service".
I've managed to restore my IMEI using MTK6575 Imei Restore tool. but still it doesn't work
I have a china phone . has been at the root and I have to replace the boot animation and shut animation .
when I want to change the background , using root explorer I copy framework - res.apk into the sdcard . after extract it , I replace background_holo_dark.png with the image I want in accordance with the resolution and I 've changed the name background_holo_dark.png .
Then I did the zip folder framework - res.apk that I have edited , I replace the zip result into framework - res.apk and then I copy and paste into the system / framework / this . notice " the folder framework - res.apk have already exist , are you sure tu overwrite " , I tap ok but my phone stuck on the display .
I waited a while but the screen does not change . I pull out the battery and reinsert and boot , but stuck on the boot animation .
I tried pressing the home button + vol up + power no recovery option , power + vol down only a test , clear flash , boot , no recovery option , power + vol up + vol down no response .
my phone : mtk6577 mitoa300
root by Frama root
not have CMW recovery or other
USB debugging not checked
i just got myself a Galaxy S4 clone, and wanted to install san andreas on it. Problem is, the phone has only 1.2 GB of internal memory, while san andreas has around 2.3 gbs of data. Now in order to install the game, i gotta put the files in the 'obb' folder in the 'android' folder of the internal memory, but since the game is so large, i cant install it. I tried putting the game on an SD card and linking the SD card to the internal memory with Folder Mount (yes, my phone is rooted), but i couldn't seem to get it to work.
View 1 Replies View RelatedI'm using a Blu Tank 4.5 running Android 4.1.1
Everything (apps, email, txts, etc) all file to the internal phone memory even though, on the settings page, (Settings/Storage/Phone Storage) I have highlighted the SD Card button. The SD card is recognised by the phone and reports 29.57 GB available. I want data to file to the SD card.
How do I save data to the external SD card? I would like music, pictures and apps to be stores at the SD card (32 GB) and not on the "normal" internal storage. My phone is a Samsund Galaxy Trend.
View 3 Replies View RelatedWhen I setup my A100 (running the ICS OTA update), I didn't have an SD card installed. It created it's own "fake" sdcard which applications use.
Now that I've added a real external sdcard, I can't get the applications to use that for their data instead of the "fake" location.
I've copied everything from the "fake" location to the new sdcard.
I suspect the problem is that the new, real sd card is called "external_sd" and the old, "fake" location is called "sdcard".
Do I need to reinstall those applications?
I am NOT trying to move applications to the external SD card; I just wants apps that normally store data there to do so instead of in the "fake" location.
Also, I am not rooted.
I have a 4gb sd and had it for a while. yesterday i got a new phone and it came with a 16gb sd card pre installed. at first i was going to use it for something else but this phone records hd videos and in doing so may take much more memory than normal, including that this phone takes mp4 videos. So I want to know a safe way to move all my data, music photos, video etc to the 16gb. I seen some people say drag all the data, do i actually drag ALL FOLDERS, or only certain folders?
View 3 Replies View RelatedI recently went about updating my tablet, and in the back of my mind I was under the impression that TWRP would backup the internal sdcard's files during the normal backup, so I thought nothing of wiping the internal sdcard. Whoops. It, of course, didn't, and now I find myself with a whole slew of stuff gone. Not much else was written to the internal sdcard (which is on an ext4 filesystem), so I suspect that a good bit of my stuff can still be sitting there in the data graveyard.
Since I'm on Linux and can't mount the sdcard directly (since for some odd reason Linux has issues with MTP), all I've been able to do was this:
I booted the tablet into recovery mode and opened up adb, and ran the following command through the adb shell:
Code:
~ # dd if=/dev/block/mmcblk0p8 of=/dev/block/mmcblk1p1
Where mmcblk0p8 is the internal sdcard with the lost data, and mmcblk1p1 is an external sdcard. I thought that by running that command, I could create a carbon copy of each and every little thing on the old sdcard, write it onto something my computer could read, and then go through the normal recovery process. In this case I planned to use a Linux tool called "extundelete."
Here's where I get stuck. The sdcard appeared to have cloned correctly, given that the entire thing is now filled up and reads as an ext4 filesystem on gparted (when it was previously fat32), but now I can't mount it. And if I can't mount it, I can't restore anything. Here's what I get when I try to mount it:
Code:
Error mounting /dev/sdb at /media/user/57f8f4bc-abf4-655f-bf67-946fc0f9f25b: Command-line `mount -t "ext4" -o "uhelper=udisks2,nodev,nosuid" "/dev/sdb" "/media/user/57f8f4bc-abf4-655f-bf67-946fc0f9f25b"' exited with non-zero exit status 32: mount: wrong fs type, bad option, bad superblock on /dev/sdb,
missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so
So to sum it up, I accidentally wiped my tablet's internal sdcard using TWRP 2.3.3.0, and now I want to recover what was lost during the wipe. Not that it matters, my tablet is a Transformer Infinity.
I'm running JB 4.1.2 and I've pretty much used up all the internal phone storage with installing games and other apps. I have an 8MB external SD with nothing on it and I'm basically wanting to transfer either the whole of android onto it if thats possible, or alternatively if thats not possible then just the larger files and folders like game data (for example GTA vice city obb takes up a whopping 1.5gb alone).
View 2 Replies View RelatedIs there a way to put transfer/backup/ store all internal Data onto my SD card? If not maybe App Data?
View 3 Replies View RelatedI have a SAMSUNG Galaxy SII, and a Sandisc 16 GB HD micro SD card, 3 days ago I noticed a notification that says:"SD card blank or has unsupported filesystem"
I tried several times to take it off and put it back but with no luck, I put the card in the card reader & connected it to my laptop, the laptop (windows 7) did't recognized it either, and it suggested to do FORMAT to the card, So I did, and choose to format to FAT32 system..I was sure that recovery programs will recover my photos and videos...
I tried 4 programs to recover them, no single photo was recovered, it just looks like a brand new Sd card now...the card now is working normally now...
Ascend P1
Is it possible to put game data in memory card and run the game. i mean should the game data be on internal storage in order to run the games or it is ok with memory card too? will the game search for game data only in internal storage or it searches the memory card as well?
I have karbonn A15 android ICS(4.0.4) smartphone, its not rooted. I want to move the app Data to my external sd card, i tried to move the data folder from the internal SD (android/data) to External SD (root folder), just to check whether it releases any memory in the storage section in phone settings. but the internal storage was same, there was no change, where does the app data resides in the internal memory, its fine if i can move app data manually to the external sd card.
I also want some clarification on below questions:
1. Also i want to know whether there is any risk rooting phone like (Bricking Phone), as i have bricked my previous Galaxy Ace when i rooted and used ROM manager.
2. Also i have heard about Folder Binding app which automatically transfers App Data to External Sd Card, is there any risk of bricking phone.
3. Whats the easiest method to root Karbonn A15 phone, i am not that tech savvy, so easiest method would be grateful in rooting device.
My concern is just to move App Data to External Sd Card, because i have some app whose Data increase very frequently (E.g: FireFox app).
How can I move dalvik-cache and data/data to sd card or sd ext2?
HTC Explorer A310e
Yesterday I tried to install a custom ROM on my device (HTC Evo 3D GSM Europe) for the first time and it took close to 12 hours to get it from ICS 4.0.4 to ICS 4.0.3 (when my intention was actually JB 4.2). Let's just say that forgot to backup his Shipped ROM, then installed JB, was incompatible with the boot loader, tried desperately to find a compatible shipped RUU that worked with the CID, spent countless hours searching in xda-developers and then finally settled for a custom ICS ROM until some time in the future.
Now on to my problem. Prior to my Factory Reset, I had moved all applications to the SD card. A simple look-over in the file system indicates all the data is still there, but reinstalling the applications and even moving them back to the SD card doesn't seem to give them access to the prior data (saved games, stored profiles, lists and anything else I might have done). It's as if the app has been installed for the first time.
Is there any way to "link" the data back to the apps (after yesterday's endeavor I ended up with a rooted phone, at least)?
my application is contact list and i want to store my contact data in sd card but how can i store data in sd card, or if i will use database then how i want to store it or using simple file than how i want to store it
View 2 Replies View Related