General :: Haipai I9377 MTK6577 Network Not Detected After Formatting
Mar 23, 2013
I've used SP Flash tool to replace rom, and accidently pressed "Format" instead of "Download".
now, the phone recognizes the SIM card, but could not connect to mobile network at all! also, on engineer menu, I go to Radio Information and it doesn't display my phone number. and there's a "gsm service: out of service".
I've managed to restore my IMEI using MTK6575 Imei Restore tool. but still it doesn't work
View 6 Replies
Apr 5, 2013
I stuck with the HAIPAI i9377 android 4.1.1 without any guide for root + gps dont work.
View 1 Replies
View Related
May 1, 2013
the last week i've flashed a new rom on my Haipai i9377 and the screen now it's totally white with a coloured pixel on the screen. i've tryed to flash another rom, but i don't know why the problem is not solved. When i switch on the phone, i can hear the sounds, but without a working screen, i can't use the phone. in attachment you'll find a photo of the screen.
View 3 Replies
View Related
Nov 29, 2012
Any guide to root the device Haipai x720D and i have seen different ways of doing it but a lot of them are in another language or appear not to be really trusty so i am afraid of trying any of them and end up with a brick..
View 9 Replies
View Related
Feb 13, 2013
I can not get my rooter Haipai 7102, however edsoedso has succeeded. URL....I used version 18 of Bin4ry on Linux and windows, same result.That's what I did:
../sudo ./adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
0123456789ABCDEFG device
[code]....
View 8 Replies
View Related
Sep 1, 2013
I have bricked my phone, and it now can't turn on..
I have a backup of the software(My friend gived me it), but when i put it in SP Flash Tool, i see only the red bar, then the program don't flash anything..
My computer see the phone as "MTK USB Port (COM6)".. Is this the problem maybe?
View 7 Replies
View Related
Apr 10, 2013
How to make custom rom from this cpu MT6577(STARMOBILE ASTRA). If it is same to procedure like samsung andriod..?
Divide into... kernel, rom, gapps..? I have a back up this rom from SP flash tool..
View 3 Replies
View Related
Jan 25, 2014
I ported rom from OPPO R817T for Lenovo A390 and everything is working, except the issue of 3G data. I have to replace from stock rom and the signal was already out . but in setting can not be set 3G Data and every time I make a call * 123 # signal is lost and changed to "no sim card".
View 9 Replies
View Related
Feb 10, 2013
How to port JB rom to MTK6577 ICS Device.......
My device is Micromax A90s, which are similar to micromax A110 and A110 have more then 2-3 Jelly Bean ROM but we dont have any Jelly Bean ROM so i have to port it, but dont know about porting methods
I already make Custom ROM for my device but don't know about porting. Can I able to port A110 JB ROM in to my Devices.....??
A90s specifications
MTK6577 1 GHz Processor
512 MB RAM
Super Amoled 4.3' HDPI (480x800) Resolution which are only things not matched to A110..........
How to port JB ROM in A90s
Cuz A110 QHD and A90s is HDPI so m able to port it........or not...........?? Or I have one more similar device rom which are same screen resolution and camera and all other things but its hardware is different cuz its Qualcomm MSM7627a Device but screen resolution are same HDPI, so can i able to port that ROM in my A90s ........??
View 2 Replies
View Related
Apr 3, 2013
I have a clone Samsung Galaxy Note II N7102,
That's chip MTK 6577, but I can't load the rom on it.
The error message is firmware & chip set not match.
View 1 Replies
View Related
Jul 21, 2013
My 9300+ (chinese mtk6577) is dead... I have to updated wrong firmware and my phone will don't turn ON again, when I use the SP Flash Tool appears the message: "Firmware Upgrade could not be executed without PMT. Please "Download" ONLY first to create PMT on the target!
My internal partition is corrupted and i can't create PMT because my phone don't Turn On, but my USB is recognized by windows.
View 3 Replies
View Related
Nov 27, 2013
I'm desperately trying to install a new recovery to install new rom, the phone will not turn on anymore, when I connect it is not detected (with the usual beeping sound on your computer).
I found online a full backup of a MTK6577 (boot.img, preloads, logo, recovery, etc.) I put all these files and made the procedure of flash with the software flash tools, the operation is completed I came out the green circle all that went well, but the phone will not turn on anymore.
The only strange thing is that I can load it with the power supply, this is because I use a cable that makes you see when you are charge(see attached file),this when there is no charging source will turn off automatically.
I have buyed this phone by this store: ([URL]...), I tried to apply for a refund, but they are gone (as usual)
I tried to click on the back button (reset), but there is no button on the inside.
Any possibility of recovery in some way, even opening the phone, otherwise they are thrown money.
View 1 Replies
View Related
Aug 7, 2013
i bought a mtk6577 clone s3. My problem is sometimes i rebooted phone, after opening proximity and light sensor doesn't work. screen don't turn off in call and doesn't call the person displayed on screen when i take ear. And battery drains too much. (example: when proximity and light sensor works with %90 battery, when it doesn't work after reboot plummets to %50).Another issue is when i reboot phone, boot animation doesn't show when proximity and light sensors don't work.
View 2 Replies
View Related
May 15, 2013
I have Sharp SH837W, when I try to install CWM, I wrote it to address 0x0 and it is bricked. I know I write something over its Preloader.
I tried but can't write down preloader again.
I tried to find TestPoint, maybe I found it but I don't know what should I do with it. I connect the test point with USB -5v and connect cable but still can't write anything (I got error 5054 in SP Flash Tool).
View 6 Replies
View Related
Dec 6, 2012
How to make the following phone's magnetic and orientation sensor working? Both of these sensors are not working on my phone (verified by many apps such as Z-deviceTest, AndroSensor and Android Sensor Box).
Various applications have shown that this phone has 5 sensors :
- yamaha530 Orientation Sensor : 0.25 mA by Aichi Steel
- yamaha530 3-axis Magnetic Field Sensor :0.25 mA by Aichi Steel
- bma222 3-axis Accelerometer : 0.13 mA by The Android Open Source Project
- tmd2771 Proximity Sensor : 0.13 mA by Capella
- tmd2771 Light Sensor : 0.13 mA by Capella
Phone name : Clone Samsung Galaxy III S9300
Manufacturer : alps
Model: e1901_v77_jbl1_9p017
CPU: MTK6577 Dual Core 1.0GHz
Android version : 4.1.1
Baseband version : MAUI.11AMD.W12.22.SP.V15,2012/10/08 20:09
Kernel version : 3.4.0 (root @ abc-desktop) #1 SMP PREEMPT Mon Nov 12 18:32:14 CST 2012
Build Number : e1901_v77_jbl1_9p017_20121105
Perhaps there is new ROM or kernal that can handle the sensors better?
View 9 Replies
View Related
Mar 25, 2013
I have MobileUncle Tooll (granted SuperUser) and ROM Manager (granted SuperUser) installed on my Goophone I5 MTK6577 BUT I still CANNOT bypass Android Recovery 3E to install the goo.zip ROM -
View 9 Replies
View Related
Nov 3, 2013
I have tried with so many SPMDT versions to change the display driver of my Alps Note 2., which has MTK6577 Chipset. But in all those tools., can't change the drivers., when click unlock., there are nothing to select., all the values are NULL..
Here I have attached some screen shots..
View 8 Replies
View Related
Mar 14, 2013
I just bought this phone three weeks ago and It was working well .. then I tried an App (pimp my rom) and I forgot to enable Usb Debugging mode so I restarted phone then Found a message ( Unfortunately, Launcher has stopped ) and when I press ok it shows again .. I can only switch on/off wifi bluetooth GPS and those stuff on Notification bar but I cant enable Usb debugging mode because settings crash with ( Unfortunately, Settings has stopped ) No menu No home screen .. only those messages with a useless notification bar I tried everything possible to recover this phone but failed because The computer cant define the device because of the Debugging mode and when I try to flash a rom by recovery mod it tells me signature failed Is there anything I can do for this phone? or its over?
View 4 Replies
View Related
Sep 4, 2012
How-to root a Star 001s phone?
It's a new one with the MTK6577 chipset from china.
View 9 Replies
View Related
Feb 9, 2014
I have a china phone . has been at the root and I have to replace the boot animation and shut animation .
when I want to change the background , using root explorer I copy framework - res.apk into the sdcard . after extract it , I replace background_holo_dark.png with the image I want in accordance with the resolution and I 've changed the name background_holo_dark.png .
Then I did the zip folder framework - res.apk that I have edited , I replace the zip result into framework - res.apk and then I copy and paste into the system / framework / this . notice " the folder framework - res.apk have already exist , are you sure tu overwrite " , I tap ok but my phone stuck on the display .
I waited a while but the screen does not change . I pull out the battery and reinsert and boot , but stuck on the boot animation .
I tried pressing the home button + vol up + power no recovery option , power + vol down only a test , clear flash , boot , no recovery option , power + vol up + vol down no response .
my phone : mtk6577 mitoa300
root by Frama root
not have CMW recovery or other
USB debugging not checked
View 1 Replies
View Related
Apr 26, 2013
I am facing problem in connecting my android with pc. Its is not being detected! I went throught Factory Data Reset, refreshed drivers and even changed the data cable, but still not working.
View 2 Replies
View Related
Sep 10, 2013
My phone is a brand spanking new 7inch Dual SIM Android 4.1 JXD P1000. The phone suddenly decided it would not turn on yesterday, and now when I plug it in to my computer while turned off and run the memory test on SP FlashTool, It says that the External Ram is not detected, and that the EMMC is not detected either. (I have flashtool as I used to mess around with other MTK's)
View 2 Replies
View Related
Feb 27, 2013
Is there any tool or app that can format (FAT32) a pen drive connected to android device?
View 2 Replies
View Related
Jan 22, 2013
I have had a problem when trying to update the ROM of my Ascend g300. While doing the factory reset it got stuck on formatting /cache. It appened a few hours ago and it's still there. I already pulled out the battery but as soon as i turn it on, it goes to the same screen. I cant do anything else on the phone, not even go to the recovery screen.
View 1 Replies
View Related
May 31, 2012
I've followed so many guides. [URL] ..... (this is one I've used of many)
It seems that, whenever I'm done formatting in GParted the microSD card is unaccesable through windows and thus I cannot place a new ROM to install on my SD Card.
Mobile phone:
HTC Desire
Rooted
S-Off
View 1 Replies
View Related
Apr 6, 2012
How to change my number format from the american xxx-xxx-xxx to my country's (Argentina) format. MoreLocale 2. That's exactly what I wanted!!!" Except that's now what I am looking for. There are plenty of websites that tell you to write these numbers down in my google contacts with that format, except that's not what I'm looking for.:
MoreLocale 2 changes the standard American formatting xxx-xxx-xxx to xxxxxxxxx when I select Argentina which is NO FORMATTING once so ever. Even Brazil and Chile and Uruguay, which have the same format gives the same result.
I want my numbers to be formatted xxxx-xxxx. Any way (even manual system file editing) that will allow me to have all numbers entered into a dialer formatted xxxx-xxxx-xxxx.I've lost hours online and all I can find is people praising MoreLocale2 for removing the dashes.. I don't want them removed, I want to change the PLACES where these dashes go...
View 2 Replies
View Related
Nov 24, 2012
There are no options in the settings to format the sd card, just mounting and unmounting as well as total space etc. I am running ICS 4.0.4 and am not rooted ! Also, I was not sure if the settings were created by LG because they are different from the other versions I have seen.
View 6 Replies
View Related
Sep 15, 2013
I have a sd card that was working on my phone, suddenly sd card stopped working and my phone cant detect him. I tried to connect on my pc and my pc also dont detect it. Tried in various ways, tried with usb phone cable, tried with card reader tried with usb card reader, my sd card is just not detected.
I Also tried various softwares to format it but i cant do anything because nothing detect the card.
Please dont tell me to format sdcard, or mount sdcard in phone etc.... cant do anything because i cant acces that option because sdcard IS NOT DETECTED!
- Sd card is not locked
-kingston 16 gb micro sd HC
View 24 Replies
View Related
Nov 9, 2012
i installed wifikill i downloaded the apk through 4shared.But my avast is detecting it as a virus.This is what i get and what the app looks like (dunno why but it looks different on trial version as ive seen)
View 1 Replies
View Related
Jun 18, 2013
I got my techno f7 bricked after rooting and trying to install chain fire 3d. I tried to flash it with SPF flash tool but ended up making the matter worse as the phone is no longer recognised when I plug it into the system.... no sound
Model tecno f7
Mtk 6577
Kernel 3.4.0
Ver 4.1.1
View 1 Replies
View Related
