General :: How To Root G-Tide E77 And Flash CWM Recovery
Feb 6, 2014Now I have G-tide E77 Chinese android mobile
How I can root it and flash cwm recovery ...
Now I have G-tide E77 Chinese android mobile
How I can root it and flash cwm recovery ...
just I want to know is it possible to flash recovery IMG without root access ?
View 1 Replies View Relatedhow rooting works. I read that stock recovery doesn't let us flash packages not signed by the manufacturer, and that's the reason for custom recoveries (they don't check). So my question is how do we get recovery to flash the root package in the first place? Or is it the fact that I have a Samsung with an unlocked boot loader?
View 2 Replies View RelatedDoes anyone know if one needs to overwrite the recovery flash in order to get root? What if I don't want to flash new roms but I would like to remove the extras that are put on my phone.
View 3 Replies View Relatedrooted back to stock---tried to flash clockworkMod recovery b4 downloading ROMs---get message "you must root phone...Superuser not found...." -----how do i proceed?
View 1 Replies View RelatedI have a Nabi 2 tablet that I've rooted, installed TWRP, and flash the gapps and a few other tweaks to. It's about to go in for an RMA since the USB and charging ports are both broken. The problem in the USB port is that one of the pins got bent - I don't know how, it looks like the conductor somehow got peeled back off of the plastic. The point is, I have no USB access to the device.
In order to pass the inspection for the RMA, I need to have it stock I can flash the stock ROM by putting it on the SDCard in my laptop then transferring that to the device and flashing it through TWRP. The question I have, though, is whether I can flash the stock recovery with ADB access to it. Every thread I've been able to uncover so far about flashing a recovery requires ADB access to issue the "adb fastboot flash" command. Is there another way to do this?
I tried to flash CWM Recovery but when the 'confirm your device' menu popped up, my phone wasn't there so i just selected the first one on the list. Now when i try to reboot into recovery, nothing happens. It just boots up normally. how to either flash stock recovery or a custom recovery that will work?
View 1 Replies View RelatedMy phone is on CM9.. i want to revert it in stock rom. my computer doesnt detect my Phone when emergency mode even i have drivers installed.
Is there a way to flash my Phone with the CWM recovery with the stock rom? .kdz file?
I have myTab 7 tablet and it's not officially supported device for any recovery. Does it matter? Can I flash any custom recovery e.g. CWM touch recovery or TWRP? Won't it destroy my tablet?
View 1 Replies View Related1. Can recovery flash bootloader?
From this link====>[URL] ....., I think it can do that. But I'm not sure.
2. Can recovery flash recovery partition itself?
I think it can not do this. Not confirm that.
3. We know in update.zip, boot.img is corresponding boot partition, but why system is a folder, not system.img? There is a system partition also.
4. While OTA upgrade system, why the update package downloaded under /cache path? Can we change it to sdcard?
5. Most important, what exactly update-script do things under recovery mode? How the command executed?
BTW, there are other questions, but not related to Recovery Mode.
1. How can I see the flash partitions? I know to use the command cat /proc/mtd, but as Samsung, it use emmc flash, while I type that command, no results printed. How to see?
2. About userdata partition, we know that when first run android OS, system will copy files from /system to /data, but does it do it every time that we turn on the phone or just do it once after the first booting after we update our system?
I hit the top button. Flash Clockworkmod recovery or what ever it said. I then backed up my Current ROM. I then downloaded Cyanogen v6.0.0 cr2. It downloaded and rebooted my phone. But It went to a screen with a Triangle w/ exclamation and a phone under it. I then hit the up vol button and camera, and now I'm at the Android system recovery page and I don't know what to do next. These are my options reboot system now apply sdcard:update.zip wipe data/factory rest wipe cache partition wipe base band data. I did click to backup current ROM and wipe data and cache.
View 38 Replies View RelatedIts rooted, I cant get clockwork recovery to install/flash.
View 5 Replies View RelatedI have an AT&T SGS4 with a melted USB port so there is no way for me to use fastboot or Odin to flash bootloaders, etc. Is it possible to flash a Samsung factory bootloader through recovery?
What I am trying to accomplish:
I am on Touchwiz 4.3 and the 4.4.2 KK release was leaked in our forum. I used the dsixda kitchen to break it down and made a ROM out of it that successfully flashed in recovery but kernel panics at the AT&T splash boot screen because the RAMdisk doesn't match the bootloader version. So I need to upgrade the bootloader to the 4.4.2 version so it will boot.
I unpacked the RAMdisk and there is nothing in any of the init.xx files that points to the bootloader. I even used a hex editor to look at the init binary which references the bootloader but there was nothing in there that I could change (from what I saw).
I need to flash a file that locks the bootloader. It contains Aroma Installer. Is there a way to flash it without booting into recovery? Something linke an app that flashes the file directly from the phone?
View 9 Replies View RelatedI used comand
fastboot flash recovery recovery.img
but It not working. Drivers is Full.
I am trying flash the latest recovery mod but it's stuck on 100% don't know what to do
View 6 Replies View RelatedI have been lucky enough to been given a Huawei P1 and a P1 XL.
I have managed to root it successfully which is great but the rom on both does not come with Google Apps Suite.
I know it's possible to flash the gapps once rooted and you have a recovery on Huawei's as I have done this on my honour.
The Chinese recovery available for P1 doesn't work on my P1 or XL.
Is there any way to flash the gapps packaged without a recovery or to do it manually?
I'm using a Tecno T3 running android 2.3.5, and using a qualcomm msm7627a chipset, I've tried rooting it using one click methods but to no avail. so I came across a thread that says If I flash a cwm recovery, I can use universal gingerbread root to root the phone. I Dont know how to port cwm to my device, so I decided to use the cwm for the karbonn a7+ which uses the same chipset. will it work?
View 4 Replies View RelatedIs it possible to flash new ROM in TWRP recovery from internal storage without using PC. I moved new ROM to my phone and i can see it in TWRP but is it safe to install it like that? Should i move new ROM in some specific folder first or not?
View 1 Replies View RelatedI recently bought a Pearl Touchlet X10 quad core (PX-8880-675) tablet, but it was full of mods and when i plugged in the charger i received the "plugged in, not charging" message. So i started to clean up the ROM. Finally it showed charging, but now i really messed it up, beacuse now it is not booting. The tablet was not factory software, another tablet software on it that has a volume rocker. To start the flash mode i need the volume up button, but this version of tablet does not have this button. I tried the home button version, but it is not working because of the different firmware.
Here's the thing:The tablet always starts recovery mode, no screen, but adb working. When i type "ls /dev/block" in ADB shell it shows loop0-loop7 and nandf, so it is not seeing the nand I have seen other forums that when I type "dd if=/dev/zero of=/dev/block/nanda" it will erase the nand, and the tablet is force booting into fel mode (flash mode), but it not erasing beacuse the recovery is not for this tablet and it not seeing the nand.
I have problem for flash recovery on my phone, he's unlocked, i make erase recovery but at the time I fastboot flash recovery cwmr_touch.img answer are always not a img or a folder!?I am working on a Mac.
My phone are huawei ascend g 600 huawei u8950dv100r001c17b952 and i wanted to install U8950D_FloMass-ter_1.7.0
at this time I cannot root
I have a Dreambook W7 and it looks like I've killed it.
That's what happened: I've tried to flash a new recovery, but did it in a wrong way, so now I can't turn the device on. In both variants (usual boot with "Power" button or boot in recovery mode) I just get an Android logo and nothing more.
Is it possible to somehow repair my tablet?
What was actually done wrong - I've used 'dd' command with 'of' set to "/dev/block/mmcblk0" with a wrong 'if' file.
I just purchased a cheap 9.7" Android Tablet, Model AM09-D2. It came with ICS 4.0.4, has 16Gb ram and a dual core Cortex A9 CPU. I would like to know how I go about backing this thing up. It is rooted and has absolutely no blootwear installed. Is it possible to flash a custom recovery. Like TWRP or CWM to save a image of the rom. I have already did a data and app backup with Mybackup Pro. Now I would like to backup the Rom and maybe do dump. Is it possible and if so how? Not really that comfortable with ADB/fastboot, truthfully I don't understand what the difference is. I already have drivers setup for Samsung Galaxy Nexus on my Win 8 notebook. Will installing ADB/fastboot screw things up?
View 1 Replies View RelatedHow i can directly reboot into recovery and flash a .zip file via script for terminal emulator?
I think you know the ROMManager, you can download updates there, it automatically reboots into recovery and flashes without asking the .zip file, how can i realize that via script for the terminal emulator? cuz i want to create a updater for my and my friends roms
I have an AT&T Atrix 4G and I wanted to imstall CM7.2.
I had the latest Atrix Android version on it. Then I followed the instruction at the cyanogemod wiki for the atrix. So I flashed the sbf (cyanodenmod wiki -> Motorola_Atrix_4G:_Full_Update_Guide).
The rsd lite flashing didn't succeed because the atrix rebooted and the programm couldn't switch into BP passtrougth, or so. At this point the device said something about 0x1000 no bootloader, but I could choose between rsd, fastboot and the other possibilities.
I booted into the fastboot mode and did an oem unlock. Now it says unlocked.
I booted again into the fastboot mode, and now it should be a simple
Code:
fastboot flash recovery recover.img
But:
Windows) it always says:
Code:
sending 'recovery' (4824 KB)... OKAY [ 0.453s]
writing 'recovery'... FAILED (status read failed (Too many links))
after that the device reboots and is in a boot loop
so i tried linux) The first time i tried the command everythings worked fine, but after reboot i chose.
Code:
android recovery mode, but after a while (secs) the device rebooted.
so went to fastboot again, but now the device reboots after the sending command and then it says writing failed because of no device
I don't know if when I am using rsd lite to flash a complete image the phone reboots again and i have a hard brick.
Current issue is that I my phone will boot just fine into regular startup however it will no longer boot into recovery mode.
I have tried the below methods but the main problem that I run into is that when I issue flash_image recovery /sdcard/recovery.img(I have tried multiple img files such as the clockworkmod and SPRecovery) however none of them have worked they are receive the below message.
# flash_image recovery /sdcard/recovery.img
flash_image recovery /sdcard/recovery.img
error scanning partitions
What I need at this point is either a way to get some form of recovery loaded either the out of the box version or clockworkmod version working so I can flash my phone and get gingerbread loaded. Or I need to break the OS to the point where the phone will not load past the boot loader.
Phone information:
Droid 2 Global
System Version 2.4.330.A956.Verizon.en.US
Android Version 2.2
Kernel Version 2.6.32.9-g9e2c63d
What I have looked at so far: [URL] .....
its been a while since I have rooted my phone and I want to install custom roms but I can't flash clockwork mod. I am using ROM manager.The problem is my phone isn't listed on the list of devices when I try to flash. The list has -
Commtiva z71 (Boston, blaze and more)
Dell steak
Geeksphone one
Huawei ascend
Huawei ascend 2
Huawei pulse
Huawei U8220/U8230
Micromax A70
Spice MI700/Commtiva link 700 and more.
E310
How to install cwm recovery,to flash rom and any available custom roms for this phone...
my phone is a galaxy s3 clone
Model number
GT-I9300
Baseband version
MAUI.11AMD.W12.22.SP.V5,2012/10/23 14:35
Kernel version
3.0.13
root@nebula#1
SMP PREEMPT Mon Jan 21 16:59:34 CST 2013
Build number
APLS.ICS2.MP.V1
Custom build version
004120121
I deleted /system folder on my nexian cosmic journey. And now my nexian is stuck...
I try to using fastboot mode to flash recovery image, but my device seems not detected. I already installed the android composite driver, but when i use "fastboot devices" command, it shows (?) So how the heck to get my nexian back to normal?..
Or perhaps, if i just be able to put back the /system folder to its place again, it would be more easy to recover it... But how access the root when phone is like that?
I'm following step by step process to root my gt-s5310 using ODIN 3.07. Started from download mode and connect to the PC is no problem at all. ODIN finished with the GREEN PASS. When I tried to open recovery mode, only android recovery mode is open(but malfunctioning, going no where when I press the home button) that recovery mode also don't has "install zip from sd card" option.
My android version is 4.1.2 . Baseband version S5310DXAME2. Kernel version 3.0.15-1521875 se.infra@SWDA2309#1
Attached is the recovery mode picture