General :: MTK6577 Fail To Load ROM?
Apr 3, 2013I have a clone Samsung Galaxy Note II N7102,
That's chip MTK 6577, but I can't load the rom on it.
The error message is firmware & chip set not match.
I have a clone Samsung Galaxy Note II N7102,
That's chip MTK 6577, but I can't load the rom on it.
The error message is firmware & chip set not match.
Dunno what's going on. When I first got my phone Pandora was flawless. Then after awhile it would fail to load songs and lockup (I'd have to kill the process and restart Pandora to get it to work again). Then it got to the point where it would randomly stop mid-song and just skip ahead on its own or fail completely. Now it won't even load. None of my stations load at all. I'd rather not have to resort to using a different service, since I have my Pandora stations setup nearly perfectly
View 3 Replies View RelatedHow to make custom rom from this cpu MT6577(STARMOBILE ASTRA). If it is same to procedure like samsung andriod..?
Divide into... kernel, rom, gapps..? I have a back up this rom from SP flash tool..
I ported rom from OPPO R817T for Lenovo A390 and everything is working, except the issue of 3G data. I have to replace from stock rom and the signal was already out . but in setting can not be set 3G Data and every time I make a call * 123 # signal is lost and changed to "no sim card".
View 9 Replies View RelatedHow to port JB rom to MTK6577 ICS Device.......
My device is Micromax A90s, which are similar to micromax A110 and A110 have more then 2-3 Jelly Bean ROM but we dont have any Jelly Bean ROM so i have to port it, but dont know about porting methods
I already make Custom ROM for my device but don't know about porting. Can I able to port A110 JB ROM in to my Devices.....??
A90s specifications
MTK6577 1 GHz Processor
512 MB RAM
Super Amoled 4.3' HDPI (480x800) Resolution which are only things not matched to A110..........
How to port JB ROM in A90s
Cuz A110 QHD and A90s is HDPI so m able to port it........or not...........?? Or I have one more similar device rom which are same screen resolution and camera and all other things but its hardware is different cuz its Qualcomm MSM7627a Device but screen resolution are same HDPI, so can i able to port that ROM in my A90s ........??
My 9300+ (chinese mtk6577) is dead... I have to updated wrong firmware and my phone will don't turn ON again, when I use the SP Flash Tool appears the message: "Firmware Upgrade could not be executed without PMT. Please "Download" ONLY first to create PMT on the target!
My internal partition is corrupted and i can't create PMT because my phone don't Turn On, but my USB is recognized by windows.
I'm desperately trying to install a new recovery to install new rom, the phone will not turn on anymore, when I connect it is not detected (with the usual beeping sound on your computer).
I found online a full backup of a MTK6577 (boot.img, preloads, logo, recovery, etc.) I put all these files and made the procedure of flash with the software flash tools, the operation is completed I came out the green circle all that went well, but the phone will not turn on anymore.
The only strange thing is that I can load it with the power supply, this is because I use a cable that makes you see when you are charge(see attached file),this when there is no charging source will turn off automatically.
I have buyed this phone by this store: ([URL]...), I tried to apply for a refund, but they are gone (as usual)
I tried to click on the back button (reset), but there is no button on the inside.
Any possibility of recovery in some way, even opening the phone, otherwise they are thrown money.
i bought a mtk6577 clone s3. My problem is sometimes i rebooted phone, after opening proximity and light sensor doesn't work. screen don't turn off in call and doesn't call the person displayed on screen when i take ear. And battery drains too much. (example: when proximity and light sensor works with %90 battery, when it doesn't work after reboot plummets to %50).Another issue is when i reboot phone, boot animation doesn't show when proximity and light sensors don't work.
View 2 Replies View RelatedI have Sharp SH837W, when I try to install CWM, I wrote it to address 0x0 and it is bricked. I know I write something over its Preloader.
I tried but can't write down preloader again.
I tried to find TestPoint, maybe I found it but I don't know what should I do with it. I connect the test point with USB -5v and connect cable but still can't write anything (I got error 5054 in SP Flash Tool).
Any guide to root the device Haipai x720D and i have seen different ways of doing it but a lot of them are in another language or appear not to be really trusty so i am afraid of trying any of them and end up with a brick..
View 9 Replies View RelatedHow to make the following phone's magnetic and orientation sensor working? Both of these sensors are not working on my phone (verified by many apps such as Z-deviceTest, AndroSensor and Android Sensor Box).
Various applications have shown that this phone has 5 sensors :
- yamaha530 Orientation Sensor : 0.25 mA by Aichi Steel
- yamaha530 3-axis Magnetic Field Sensor :0.25 mA by Aichi Steel
- bma222 3-axis Accelerometer : 0.13 mA by The Android Open Source Project
- tmd2771 Proximity Sensor : 0.13 mA by Capella
- tmd2771 Light Sensor : 0.13 mA by Capella
Phone name : Clone Samsung Galaxy III S9300
Manufacturer : alps
Model: e1901_v77_jbl1_9p017
CPU: MTK6577 Dual Core 1.0GHz
Android version : 4.1.1
Baseband version : MAUI.11AMD.W12.22.SP.V15,2012/10/08 20:09
Kernel version : 3.4.0 (root @ abc-desktop) #1 SMP PREEMPT Mon Nov 12 18:32:14 CST 2012
Build Number : e1901_v77_jbl1_9p017_20121105
Perhaps there is new ROM or kernal that can handle the sensors better?
I have MobileUncle Tooll (granted SuperUser) and ROM Manager (granted SuperUser) installed on my Goophone I5 MTK6577 BUT I still CANNOT bypass Android Recovery 3E to install the goo.zip ROM -
View 9 Replies View RelatedI have tried with so many SPMDT versions to change the display driver of my Alps Note 2., which has MTK6577 Chipset. But in all those tools., can't change the drivers., when click unlock., there are nothing to select., all the values are NULL..
Here I have attached some screen shots..
I just bought this phone three weeks ago and It was working well .. then I tried an App (pimp my rom) and I forgot to enable Usb Debugging mode so I restarted phone then Found a message ( Unfortunately, Launcher has stopped ) and when I press ok it shows again .. I can only switch on/off wifi bluetooth GPS and those stuff on Notification bar but I cant enable Usb debugging mode because settings crash with ( Unfortunately, Settings has stopped ) No menu No home screen .. only those messages with a useless notification bar I tried everything possible to recover this phone but failed because The computer cant define the device because of the Debugging mode and when I try to flash a rom by recovery mod it tells me signature failed Is there anything I can do for this phone? or its over?
View 4 Replies View RelatedHow-to root a Star 001s phone?
It's a new one with the MTK6577 chipset from china.
I've used SP Flash tool to replace rom, and accidently pressed "Format" instead of "Download".
now, the phone recognizes the SIM card, but could not connect to mobile network at all! also, on engineer menu, I go to Radio Information and it doesn't display my phone number. and there's a "gsm service: out of service".
I've managed to restore my IMEI using MTK6575 Imei Restore tool. but still it doesn't work
I have a china phone . has been at the root and I have to replace the boot animation and shut animation .
when I want to change the background , using root explorer I copy framework - res.apk into the sdcard . after extract it , I replace background_holo_dark.png with the image I want in accordance with the resolution and I 've changed the name background_holo_dark.png .
Then I did the zip folder framework - res.apk that I have edited , I replace the zip result into framework - res.apk and then I copy and paste into the system / framework / this . notice " the folder framework - res.apk have already exist , are you sure tu overwrite " , I tap ok but my phone stuck on the display .
I waited a while but the screen does not change . I pull out the battery and reinsert and boot , but stuck on the boot animation .
I tried pressing the home button + vol up + power no recovery option , power + vol down only a test , clear flash , boot , no recovery option , power + vol up + vol down no response .
my phone : mtk6577 mitoa300
root by Frama root
not have CMW recovery or other
USB debugging not checked
I got busybox pro from the market but when I try to smart install it, it shows free space as 0.0mb whereas I have around 500 my left.
AUXUS Nuclea N1
I tried modding some APK to make the app able to be multi view (tutorial : URL... ), I succeed modding 8tracks.apk, musicxmatch.apk but then when I tried to do it to LINE (NAVER) and installed it, it said "app was not installed".
It is a system tool while building the apk, and it still doesn't work.why some people said to not sign a system tool apk? while from what i've read, android cannot install an unsigned apk. mod the NAVER/LINE Games to stop checking if i am a rooted device?
I wanted to root my new galaxy victory 4G LTE from Sprint and put a custom rom on it. Followed rooting guides and that worked fine. Then I went to find a rom that would work and all I found was victorious, which I was so eager to try I didn't even think to read that part that said VM only. Got stuck in a boot loop. That's where I made the real mistake and decided to try a rom for another galaxy model, a custom s3 rom. Ever since that my touchscreen has been unresponsive, soft buttons and hard buttons work though. Using ODIN I've tried to restore to stock, I've used KIES to try to update, and everything has worked as far as I could want it to, but nothing restored touchscreen functionality. I am able to get into the hard button guided recovery menu and download mode, but have been unable to get anything touch based to work, and cannot find a CM non touch recovery that will work with this phone.
View 3 Replies View RelatedI try to install Android on my Acer W700 by follow the guide on this site but it always failed at "Creating filesystem with parameters"....
I tryed with different version of android and install the lat version of BIOS but it's never work...
I was trying root my Galaxy S2 HD LTE that i just got from Korea (I am based in the UK)
Was trying to install ICS on this - not sure I have fubar'ed the device or just that my korean is not up to it, but I cannot figure out what I need to do.
Basically i got to the stage of installing kies, then Odin 1.85, and was following the "Firmware I9100XXLPB Android 4.0.3 (Ice Cream Sandwich) for Samsung Galaxy S II I9100" link
I have tried to reset the device to no avail.
I am trying to go back to stock android 4.2.2 Galaxy S4 Mini SPH-L520, and getting the following error from Odin,
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..[code].....
I have a verizon samsung galaxy s3. I'm planning to upgrade to the kitkat 4.4 but I was going to do a nandroid backup first. Using rom manager I am attempting to go into recovery mode but everytime I try I get this message:
System software not authorized by Verizon Wireless has been found on your phone. Please turn off your phone and go to the nearest Verizon Wireless store for support.
I disabled the knox sensor and then totally removed it and it's components. I don't know what else to try.
I followed everything from the [HOWTO] Root the Atrix 2 thread and i tried both 1 click method and the manual method.When I type in
---> adb shell (only type this if you are no longer in shell@targa)
---> mount -o rw,remount /dev/null /system
in the cmd, shell not found and Segmentation fault came out.
My HTC Wildfire (Buzz), i made it S-OFF , Rooted it (i guess) and succeessfully changed its rom to MIUI 2.3.7 . Before changing the rom i backed up the stock rom .The problem comes to whenever i boot to recovery and reach to a point where i am to select if i want to install zip file from sd cards and other selection, i am not able to install or access anything from sd card. Even when i tried to restore the backup using Rom Manager it fails.
> I really want to restore the back up or install another very stable rom compatible with my HTC Wildfire
> When i hold vol- and power buttons and try to go to recovery, the phone hangs at the Revolutionary logo !
THE MIUI is slow and can't withstand stress as every time i try to do something fast it displays error messages.
I am trying to Port the Mokee 4.4.2 and have become some what successful as it boots... but my story ends there it self !!
After it boots at the first screen itself a Pop up appears mentioning that " Unfortunately , the process com.android.systemui has stopped "
I have tried replacing the SystemUI.apk but still the problem persists !
HTC ONE X
my one x is stuck in the boot logo " htc quietly brilliant" screen and not responding to go to the OS 4.0.4
when i connect it i hear the sound of the usb connect but cant see it on "my computer"
i tryed to do fastboot but fail*
i tryed to do recovery reset mode and and it transfer me to the clockworkMod Recovery but in the "install zip from sdcard" there is no files it
looks like the phone as been format and there is nothing on him
how can i install a new OS on my phone again ?
p.s - when the phone is connected to the reset mode its say "fail to open usb master mode"
I have the Samsung Galaxy Tab 3, 7" (WIFI-ONLY).
Firstly, let's start by saying that I ended up rooting it after a while because it got boring having the simple, unmodified android.
It seems creativity got the best of me, and I ended up wanting to switch back to my normal android days. The problems started when I looked for the ways to upgrade my device, and it sais my device had been modified (rooted). So then I tried deleting SuperSU, thinking that would unroot, but nope... I then went to my great friend, we all know as Google. I then found the firmware, however didn't notice it said 3G, not just WIFI.... and loaded it onto my tablet following the instructions leading me to use Odin. I now have a Samsung Galaxy Tab 3 WIFI only, with 3G Firmware.
After countless hours, days, and now weeks of trying to get it back to the normal firmware, all my attempts result in an error on Odin, and here's what I get:
First, I just load the .md5 file, and this happens.
---
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..[code]....
Now, what do I do to get my precious tablet back to normal? , since I have the 3G version, I'm required to have a sim card which I can't put in because there's no sim card slot (it's a WIFI tab). I can't even use WiFi, because it won't turn on without a SimCard.
I have a S4 (SGH-I337M) with Android 4.2.2 installed on it, Not Rooted, Not unlock. My problem is with the WIFI and Network mobile serviec (GMS, 4G).
1. when i turn the wifi on, it gives me fail to obtain IP, and at the same the mobile service detected my Mobile Network (Rogers) for moment then it turns to No service for few moment to come back to Rogers an other time and so on( like infinity loop between Service detected and No service).
2. usually when i turn off the WIFI, the phone goes to look for 4G network but this doesn't happen now, and still Mobile Service between detected and Not.
3. What has been said until now is with SIM card On. and i tried to take it out the phone and turn the phone on, and the same problem is still with Mobile Network service but now the infinity look (as I like to call it) is between No service and Insert Sim card, at the same time can't access to the WIFI (Fail to obtain IP).
i have tried several thing to solve problem : like changing the SIM card, Reset phone to factory setting, turn it off for while and open it, but the problem still excite.
it seems that it is software problem but i don't know which process responsible of Network Service setting (WIFI, 4G, GSM) so i can stop it and lunch it again.