General :: HTC Acquire Root - Reboot Into Recovery Mode It Says Locked?
Nov 13, 2012
Ok, I just bought an HTC Acquire with Android Version 2.3.4 HTC Sense 3.0 Software number 1.26.557.9 Kernel 2.6.35.10
When I reboot it into recovery mode it says:
***Locked***
Kingdom PVT SHIP S-ON
HBOOT-1.22.0000
RADIO-1.11.00.0903
eMMC-boot
Aug 8 2011
I have tried to root this phone using Gingerbreak, Revolutionary, Z4root, and a few others. When I search on Google or the XDA website I can't find absolutely anything about an HTC Acquire. It's like the internet thinks the phone doesn't exist? I recently upgraded to it from my HTC Desire CDMA Bravo-c that I had rooted, flashed a custom rom, custom kernel, custom radio, the works.
View 3 Replies
Mar 21, 2013
I want to make a clean hard reset of my GoClever Tab R974.2 but no matter what I do it won't load the bootloader. I tried all pssible combinations of all 3 abailable buttons (power,vol+,vol-) and all possible pressing times from a few seconds to a minute.I also tried rebooting into bootloader via the ADB but without any luck (device not recognized).My main problem with this system is that I tried to root it and it seemed like it worked, the superuser .apk was installed, however when I tried to start Titanium backup or any other prog that requires root access, it shows that there is no root access. Then I also tried z4root, but no luck either and SuperOneClick just freezes when restaring the ADB daemon.
View 1 Replies
View Related
Jul 1, 2013
I recently rooted my LG Optimus L3-8C (E400) running stock rom and version 2.3.6 Gingerbread (yuck) and I followed all the instructions from this video:
in order to flash the CM9 ROM. Problem is I can NOT reboot into recovery no matter what I do it seems. When I try tp reflash the CWM recovery it tells me "successfully installed!" then when I press 'reboot into recovery" it gets stuck on the LG logo for so long I often have to hold the power button to go back to my device. I even download "recovery flasher utility" found here [URL]....but, whenever I run the app it tells me "no recovery.img" found onexternal SDCARD even though I placed it there! I tried to fastboot but whenever I run CMD it tells me " 'fastboot is not recognized."
View 3 Replies
View Related
Mar 5, 2010
I was rooted and decided to unroot for giggles. After i did I went to root again and now I am getting this: "E: cant open/cache/recovery,command " When I reboot into recovery mode.
View 4 Replies
View Related
Sep 30, 2012
Can i develop an app (apk) that reboot android in recovery without root? I have possibility to add to push my apk in /system/app/
View 3 Replies
View Related
Mar 13, 2014
My friend have a ChiliGreen tablet, yesterday he reboot it after stop all application who were running on it and after the reboot the tablet goes automaticaly in recevery mode and now every time he reboot it goes to recovery mode i make a factory reset but nothing always recovery mode.
View 2 Replies
View Related
Mar 5, 2014
I've rooted 6 or so different android phones mainly using cf-autoroot, including an i9300, and never had any issues. But I have had a few issues rooting my 9503 using the cf-autoroot method (method #1 in this post). It aooeared to work, but SuperSU subsequently fell over, and Knox complained but after reading other posts I rectified that, but obviously not quite correctly:
After using cf-autoroot, SuperSU DID NOT appear in the apps list, but Google Play said it was installed but only presented the option to open it (not update or remove).
So I then tried flashing twrp (as per method #2 in this post) which all appeared to go successfully according to Odin. I was expecting to install superSU updater, as per step 3, but recovery mode appeared unchanged/stock so of course I couldnt flash anything as there was no option to do so. Yet there were no errors reported by Odin?
So I then got hold of the app file for SuperSU 1.93 and installed it (via Airdroid). It ran. It found knox. It removed it, and root was installed successfully (as verified by root checkers, titanium backup, droid wall and the like). So I concluded I had successfully rooted my 9305.But when I reboot SuperSU falls over again on boot up, and the version I added via Airdroid has disappeared, and of course there is no root mode.
But I can then restore root access after a reboot simply by following the same process, namley installing the supersu apk via Airdroid.And why is the later version of SuperSU disappearing on reboot?
View 1 Replies
View Related
Sep 18, 2010
I'm really lost right now. First I did this-
xda-developers - View Single Post - [GUIDE] How to root Android 2.2 on the EVO 4G
Which I believe is rooting for my phone since it was 2.2 when I first received it. Now I have this.
Android version
2.2
Baseband version
2.15.00.07.28
Kernal version
2.6.32.15-g746f4f0
htc-kernal@and18-2 #58
Build number
3.26.651.6 CL218634 release-keys
Software number
3.26.651.6
Browser version
WebKit 3.1
PRI Version
1.40_003
PRL Version
60670
Now I'm trying to install Fresh 3.2.00 from
[ROM] 9/3/10 | Fresh Evo 3.2.0.0 | New OTA Base + New Stagefright + New HTC Kernel - xda-developers
I have ROM Manager installed and Flash ClockworkMod Recovery done. I already put the fresh-evo-3.2.0.0.zip into the SD card. Tried Installing ROM from SD card, checking Backup Existing ROM and Wipe Data and Cache and it asks me to reboot into recovery. Here's the problem, it restarts and just stays on the white screen with the htc EVO 4G logo.
View 2 Replies
View Related
Sep 10, 2010
It may be already stated in one of the previous threads, but I was curious as to which button combination do we hold in order to send the Fascinate into recovery mode?
View 10 Replies
View Related
May 16, 2010
how do i navigate after i reboot in recovery mode, i can't seem to change the highlight to any thing other than "reboot system now" vol keys do not do anything.
View 1 Replies
View Related
Nov 27, 2010
Updating rom requires reboot into recovery mode.. then what am I supposed to do?
It's an update for SS4.9.
I get to the recovery mode screen, then what do I do?
Just hit reboot?
"simple nandroid backup?"
Wipe my data?
Install something?
View 5 Replies
View Related
Oct 2, 2010
I just came over from a D1. I am trying to install OCLF on my SF but I am a little stuck and cannot find the answer... When I go to reboot my phone into recovery mode... what buttons do I push? On my D1 it was easy cause it had buttons ..
View 1 Replies
View Related
Oct 29, 2013
Samsung galaxy s3. used odin and cf autoroot.tar. MANY PASS and sucess but no superuser and no root access. now when i try to enter recovery mode it loads right into cf auto root. unable to enter recovery.
Can still access download mode. flashed cwm recovery ( recovery.tar.md5 ) and tried clearing cache and fatory resetting.
Can't mount and open /cache/recovery/log and last_log and command. format_volume: make_extf4fs failed on /dev/block/mmcblk0p17. error mounting /sdcard/.android_secure.
View 1 Replies
View Related
Sep 3, 2011
i just got a Samsung Captivate Galaxy S I9000, here is the problem.
1) It is locked to Rogers Wireless, because my friend tested it by inserting his Rogers SIM card into it and it works normally like a phone.
Here is where it gets interesting:
2) When i insert another foreign SIM card such as FIDO cell carrier. The phone boots into the lock screen and it says Media Scanning...and then it proceeds to the booting up screen again.
From my lack of skills in Android software, i am really stuck. But from the powers of observation, it seems the phone was flashed and is currently running a custom ROM on it from Serendipity VII.
The phone runs perfectly, without a sim card, but that's like holind a tablet without a phone line. What should i do?
Here are some details on the phone's systems.
-Firmware version 2.3.3
-Model Number:I897 ????(Why does the boot screen show I9000?,custom Rom?)
-Build number: Serendipity VII Build 2
View 4 Replies
View Related
Sep 10, 2010
I think where I messed up was I then installed ROM Manager from the market to try to get overclocked. Before I did any searching or downloading for kernels, I tried to do a backup using ROM Managers Clockwork utility.It constantly crashed my phone; I didn't get one successful backup.So I was going to try using SPRecovery, but when I turn off my phone, then turn it on holding the X key, the Motorola logo stays there forever, blinks, and then reappears again. I have to release the X key for it to get passed the logo, but then it just boots normally.I've already uninstalled ROM Manager, but do I need to do anything different so I can use SPRecovery?I'm thinking my phone is confused as to which backup/recovery mode to launch.Did I just mess up my phone?I'm a total noob at this and feel like a moron.
View 1 Replies
View Related
Jul 20, 2010
im trying to root and one of the steps is to get it into recovery mode. http://androidforums.com/all-things-root-eris/127861-universal-eris-root-dummies.html#post1186820 <-- after [fig31]. i hold both, but it just boots up my phone like normal. what do i do?
View 37 Replies
View Related
Nov 14, 2010
With a free sunday at my disposal, i thought i would try and sort my hero out as it has become super-laggy after the OTA 2.1 update (HTC hero locked to 3UK network, previously had 1.5).
So i've been trying to read as much as i can on this and other forums and got as far as installing Universal Androot, which reported success in rooting the phone.
However have now installed (and bought PRO ver) of Titanium Backup which refuses to recognize the root. It returns:
ERROR: Sorry, I could not acquire root privileges. This application will *not* work! Please verify that your ROM is rooted and includes BusyBox, and try again.
Yet, TB is listed as 'allowed' under SuperUser Permissions. And even weirder when the error dialogue box comes up sometimes a strapline flashes briefly across the screen 'Titanium backup has been granted .. permissions'. I take it that this is Superuser informing me.
So why doesn't Titanium recognize the root? Have tried re-starting and rerunning Androot (which reports that phone is already rooted, do you still wish to proceed). It's almost as if superuser isn't giving the OK fast enough or something.
Obviously don't want to start messing around with ROMs if i can't first backup my data!
View 11 Replies
View Related
Apr 3, 2014
Friends of Jupiter Huawei g525-u00and have been asked Ram Kastvm able but Alanmshkl. Already green screen after power ... not that fast boot mode will not go into recovery mode and not the original ROM using loam bottom half Vbala White gets going
View 5 Replies
View Related
Dec 12, 2013
I had it first on the Galaxy S3 with 4.2.1 stock rom, I don't know if it might be an app that might be causing this, basically when i lock the phone the screen turns off but then when i press the power button or the home button to turn on the screen it does not do anything, I know the phone is still on because sometimes if i get a text message i can see the blue led blinking and it will continue to blink even when it's frozen.
The only way to bring it back is by holding the power and home button together in order to reset it.I tried factory reset and it would not work, I flashed the phone with a custom rom for Paranoid Android 4.3 and it worked great for about a week, no issues at all, but then it started freezing when locked again.
I don't know if it might be an app that might be causing this, basically when i lock the phone the screen turns of but then when i press the power button or the home button to turn on the screen it does not do anything, I know the phone is still on because sometimes if i get a text message i can see the blue led blinking and it will continue to blink even when it's frozen.
Even worst, if i'm listening to music and i lock the phone or if the screen times out and locks when i try to unlock it i can see it's stuck but the music is still playing....
Also, if the phone is stuck and i try to call it, it will not ring not turn the screen on, it's not like the problem is just the physical buttons, i don't know what to do since the phone is out of warranty, I have never dropped the phone and there is no damage on it, it have never over heat either so i don't know what can i do...
View 6 Replies
View Related
Sep 13, 2013
I've got this Hisense EG98, i can't enable USB Debugging because it's ask for password. When i try to enter recovery mode by pressing and holding vol.down+power,green robot appeared but it just went to reboot again. Is there any other way so that i can enter to /system? I want to root my device,framaroot doesn't work either.
View 9 Replies
View Related
Apr 9, 2013
My htc keeps on rebooting itself what to do?
it hangs in recovery and in ruu but my computer recognize its connectivity.
View 2 Replies
View Related
Jul 25, 2013
I have Noir A10 by Qmobile and since morning I am having this problem. I had installed JMP ROM v 8 and it was working super fast for atleast a month or so. When I got up in the morning, I saw the wait logo(that appears when I boot up the phone). I waited for a few minutes but phone was stuck there. I tried to restart but it didnt respond. I took out the battery and turned it back on. It did turn on but display resolution had a problem. I could not see whole the screen. For instance when I browse to Application drawer, I am unable to see some of the Icons. I reset the phone to factory settings and restarted but had the same problem with display. Then I tried to reboot into recovery but it simply resets the phone to factory settings instead.
View 1 Replies
View Related
Apr 28, 2013
I have Noir A10 by Qmobile and since morning I am having this problem. I had installed JMP ROM v 8 and it was working super fast for atleast a month or so. When I got up in the morning, I saw the wait logo(that appears when I boot up the phone). I waited for a few minutes but phone was stuck there. I tried to restart but it didnt respond. I took out the battery and turned it back on. It did turn on but display resolution had a problem. I could not see whole the screen. For instance when I browse to Application drawer, I am unable to see some of the Icons. I reset the phone to factory settings and restarted but had the same problem with display. Then I tried to reboot into recovery but it simply resets the phone to factory settings instead.
I have tried a couple of applications (ROM Manager, MobileUncle MTK Tools) too but the phone is reset to factory settings each time.
View 3 Replies
View Related
May 29, 2013
Are there other ways to flash a recovery with a locked bootloader?
My Problems:
I can't flash my stock recovery through fastboot with a locked bootloader.
I can't boot into my recovery because my current recovery is TWRP 2.5.0.1 and I have a locked bootloader.
I can't unlock my bootloader because I have used an IMEI Hack Tool and set my IMEI to 0 (I guess).
I can't boot into my ROM because I used an IMEI Hack Tool.
I can't Force Upgrade too (Vol Up + Down + Power). It only shows a pink/purple screen.
Solutions:
I can only flash a recovery with an unlocked bootloader.
I can only boot into a recovery with an unlocked bootloader (except for stock).
I can only unlock bootloader if my IMEI has restored.
I can only restore my IMEI if I can boot into my ROM.
I can only boot into my ROM if I have a stock recovery.
I can only Force Upgrade if I have restored my IMEI.
If I could only restore my IMEI through fastboot,
View 9 Replies
View Related
Jan 15, 2013
i just buy my new galaxy ace plus and when i want to root it from recovery.. i cant reboot into recovery..how to reboot recovery on this phone?.. or maybe this ace+ doesnt have a stock recovery?
View 9 Replies
View Related
Jan 21, 2013
so i just find a new way to reboot to stock recovery on samsung galaxy ace plus GT-S7500 without flashing another custom recoveru like cwm or something like that
many people say that we cant access the stock recovery on galaxy ace plus because it have some bugs or something else.. now i found the way how to do that
just follow the simple guide how to do that :
1. reboot it using volume + and volume - ~> home button ~> power button
2. click and hold both volume button then the home button then the power button..
3. if the phone gets turned on so u need to keep hold that button until the recovery showed up (when it showed up and its get turned off again so u need to hold all the button again until it get rebooted to recovery)
4.if u get rebooted all time its not a big problem again .. all u need is just hold all that button until the phone gets turned on and release the power off button and hold it again until u boot it on recovery mode.. and done u booted up on recovery mode (im not responsible if ur phone gets bootloop or something else)
View 3 Replies
View Related
Jul 18, 2012
How i can directly reboot into recovery and flash a .zip file via script for terminal emulator?
I think you know the ROMManager, you can download updates there, it automatically reboots into recovery and flashes without asking the .zip file, how can i realize that via script for the terminal emulator? cuz i want to create a updater for my and my friends roms
View 6 Replies
View Related
Jul 1, 2012
I have an AT&T Atrix 4G and I wanted to imstall CM7.2.
I had the latest Atrix Android version on it. Then I followed the instruction at the cyanogemod wiki for the atrix. So I flashed the sbf (cyanodenmod wiki -> Motorola_Atrix_4G:_Full_Update_Guide).
The rsd lite flashing didn't succeed because the atrix rebooted and the programm couldn't switch into BP passtrougth, or so. At this point the device said something about 0x1000 no bootloader, but I could choose between rsd, fastboot and the other possibilities.
I booted into the fastboot mode and did an oem unlock. Now it says unlocked.
I booted again into the fastboot mode, and now it should be a simple
Code:
fastboot flash recovery recover.img
But:
Windows) it always says:
Code:
sending 'recovery' (4824 KB)... OKAY [ 0.453s]
writing 'recovery'... FAILED (status read failed (Too many links))
after that the device reboots and is in a boot loop
so i tried linux) The first time i tried the command everythings worked fine, but after reboot i chose.
Code:
android recovery mode, but after a while (secs) the device rebooted.
so went to fastboot again, but now the device reboots after the sending command and then it says writing failed because of no device
I don't know if when I am using rsd lite to flash a complete image the phone reboots again and i have a hard brick.
View 2 Replies
View Related
Nov 18, 2012
I was able to root the device by downgrading it but when i upgrade manually thru flashtool to ics 431,root and superuser app is gone.i also tried Root_with_Restore_by_Bin4ry_v16 but it does not show any restore backup option and nothing happens.. I read each and every related forum searched web but no luck .
View 1 Replies
View Related
Apr 10, 2014
I am working on Mobile forensics. I need to access locked android phone system files without USB Debugging enable.
For accessing System files, I need to root android but it is locked with pattern lock or passcode (USB Debugging Disabled).
If i'll flash the mobile, it will change the filesystem which is not forensically sound.
if i'm able to clone the mobile (bit to bit copy) for further forensics.
View 2 Replies
View Related
