the last week i've flashed a new rom on my Haipai i9377 and the screen now it's totally white with a coloured pixel on the screen. i've tryed to flash another rom, but i don't know why the problem is not solved. When i switch on the phone, i can hear the sounds, but without a working screen, i can't use the phone. in attachment you'll find a photo of the screen.
View 3 Replies
I stuck with the HAIPAI i9377 android 4.1.1 without any guide for root + gps dont work.
View 1 Replies View RelatedI've used SP Flash tool to replace rom, and accidently pressed "Format" instead of "Download".
now, the phone recognizes the SIM card, but could not connect to mobile network at all! also, on engineer menu, I go to Radio Information and it doesn't display my phone number. and there's a "gsm service: out of service".
I've managed to restore my IMEI using MTK6575 Imei Restore tool. but still it doesn't work
I can not get my rooter Haipai 7102, however edsoedso has succeeded. URL....I used version 18 of Bin4ry on Linux and windows, same result.That's what I did:
../sudo ./adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
0123456789ABCDEFG device
[code]....
I have bricked my phone, and it now can't turn on..
I have a backup of the software(My friend gived me it), but when i put it in SP Flash Tool, i see only the red bar, then the program don't flash anything..
My computer see the phone as "MTK USB Port (COM6)".. Is this the problem maybe?
I have the zte Carl. I can't do a factory reset .every time I try, the result is a white screen on reboot and stuck there. I tried to do hard reset but still got white screen. the basic problem is that both home and dial button not working so I want to do a reset. I cannot even get my phone into recovery mode. white screen again. if.
View 1 Replies View RelatedAny guide to root the device Haipai x720D and i have seen different ways of doing it but a lot of them are in another language or appear not to be really trusty so i am afraid of trying any of them and end up with a brick..
View 9 Replies View Related2 weeks ago i bought My GT-S7262 I was Flash My new firmware for My device (GT-S7262). And Pass Text Show On Odin 3.07. But, When go to recovery Mode Android Build in (3e) shown
E:missing bitmap icon_att_fota_installing and much more
When I flash CWM for S7262. The screen gooes white. i cannot root my phone .
I recently brought an ALPS i5 (fake iPhone 5) from Malaysia. I mistakenly flashed a Goophone ROM on this device and now I have a blank white screen (back lit) if I try to power on or enter recovery mode. SP Tool does not detect it..there is no system buzz indicating device is connected..nothing...
All my MTK drivers are correctly installed (I tried another MTK device) but it seems like the PC is not detecting my phone.
What do I do?
I've a two month old Haier W910 with stock ROM. The other day, when switching on the phone, the device displayed white snow. The device function normally - touch screen, audio, wireless and cellular (accept calls) but the screen continue to show white snow (like old analog TV).
I found a youtube video showing the same symptom and one of the comments suggested that the phone need to re-flash ROM and it will solve the problem. The youtube video posted confirmed that it did. Since then and for the past 3-4 days I've been trying to flash my phone but it doesn't work. I'm able to put the phone in "Download mode" and use fastboot to flash a recovery boot, oem unlock works but I can't seems to reflash full ROM: I can't use the "update.zip" method as a I can't see the screen and when I try to flash different ROMs under www.needrom.dom using 'fastboot update' it keep saying:
archive does not contain 'android-info.txt'
archive does not contain 'android-product.txt'
error: update package has no android-info.txt or android-product.txt
I can't flash the rom in "recovery mode" as I can't see the menu and select the proper option.
I guess I also need to replace the bootloader as the screen is white snow from the very beginning..
So the question is: how can I do a device full reflash WITHOUT using the screen (preferably in fastboot)
i get an white screen in place of recovery after flashing recovery.img file to the device
View 1 Replies View RelatedSo I decided to upgrade the rom on my tmobile us sensation 4g and now it is stuck on the white screen with the green htc logo. Here are the steps that I took...
Download and run HTCSupertoolv3, run "root" option, run "attempt s-off and everything else" option - go through this process by getting key and submitting code to get update.bin file and then finish
Boot to recovery, phone says Unlocked at top
Download and run android recovery manager - flash clockworkmod5 on phone
Copy ordroid for sensation zip to sd card, boot to recovery, select zip file, go through installer - shows success
boot phone - white screen with htc logo
boot into recovery - wipe cache
white screen with htc logo, learn that I need latest firmware (3.3.2) for rom to work
copy pg58img.zip to sd card, do not modify file- boot into recovery, phone says parsing pg58img.zip - then nothing, no prompts or continue
boot phone - WHITE SCREEN WITH HTC LOGO
A few months ago I bought two N8000 phones and I was glad they came with full Hebrew menus. But now I bought a device that came without Hebrew.
So I tried to update the version with this method bm-smartphone-reviews.blogspot.it/2012/05/mt6575-flashing-tutorial.html#comment-form
And now the device turns on and works, but the screen remains blank white.
I saw on the forum that people have asked for the problem and you told them they have to replace the DSP_BL file and reflash
The problem is that the links are broken and I can not find the appropriate version for me.
I have tried full and partial update with many versions:12.06.12 firmware.rar
20120705_e1808_v75_jbl1.zip
I downloaded also this tool SP_MDT software fot flashing.rar But I was unable use it
I downloaded also this two packages, (Taiwan101_STAR-N8000_V.05-1.zip + Taiwan101_STAR-N8000_ICS_V.09.zip) but they are not suitable for use with SP Flash Tool v3.1216.05 (they not have scatter.txt file)
I have recently Bought an S9300 phone and when received all was working OK. And I was really happy with the phone. BTW the phone runs on Android 4.1.1 OS (MTK6577).After a week I started experiencing problems with the camera and gallery. The seller instructed me to reset factory settings. This didn't work.
Then he sent me the firmware so that I would Upgrade it. This has been done but know, after upgrading firmware, when I turn my phone on all I get is a blank white screen. Although the hardware seems to be responding to button commands, the blank white screen persists.
To Upgrade the firmware I used the Smart Phone Flash Tool.
Whenever i start my samsung galaxy y s5360 screen appears completely white like a flashlight, but the phone is working i can recieve callls on my phone but cannot see anything on my device. even in dwnld mode & recovery mode the same problem persits, i cannot see anything .
I have installed custom creed v2.0 rom on my android device. Recently i have replaced motherboard of my device. Under Warranty.
I Want To Flash stock rom on my device but i cannot see anything on my device so i am unable to flash my device.
Another problem is that when i enter download mode odin detects my device but when i try to flash the rom it says unable to open com port.
At Present my device is working properly but when i restart my device the problem returns !!!!!!
I installed wrong firmware on my Samsung Galaxy GT-B5510 aka Samsung Galaxy TXT and i only get white screen now i cant get in recovery mode or download mode.
View 1 Replies View RelatedI was following this guide to upgrade my Sanei n10: [URL] In recovery mode I have installed the rom.zip, but after I pressed the wrong button and it turned off. Now, when I turn it on, leave the writing sanei and after few second remains on black screen.
If I try to entry in recovery mode with the vol+ button, it remains with the Android robot lying down with a red tiangolo, with no options.
What can I do to recover my tablet?
i just tried to root my note 2 but after the oden process my screen started to flickering and flashing.
View 1 Replies View RelatedAfter unlocking bootlader successfully from HTCdev I tried to install custom ROM (android revolution HD). After installing revolution HD i rebooted but screen stacked at T mobile logo. I tried again and again but facing same problem.
ACE PUT SHIP S-On RL
HBoot-2.00.0029
MICROP-0433
Radio-26.14.04.28_M
eMMc-boot
HBOOT
I accidentally opened a screen and can not get rid of it. I was looking at corporate calendar and now I have a large white no calendar events on my favorite screen that I can not get rid of. I do not have an exchange server to sync too at work.
View 2 Replies View RelatedTrying to get CM10 built for the Samsung Galaxy Reverb. It's building just fine, but no matter what we try it WILL NOT BOOT. We get a black (backlit) screen after the Samsung logo and nothing more.
I've tried flashing the stock boot.img over the rom, building and flashing the stock kernel seperately (that boots the stock rom just fine when flashed but won't boot CM10), and tried modding the ramdisk to boot, but nothing is working.
I've looked at other MSM7x30 devices to find if I'm missing anything, but I can't find anything that I don't have in the device folder.
Here's the device repo: [URL] ......
I have flashed my x10a with flashtool and x10_2.3_aro_2.ftf firmware. But after the flashing is finished, my phone screen touch is not working. What can I do now? I am unable to install xrecovery to install another rom bcoz screen touch isn't working. So I can't install any custom ROM.
View 2 Replies View RelatedMy Samsung Galaxy Reverb has nobody willing to build CM10 for it, so I decided to take on the task. It built without error - processed the kernel and all the CyanogenMod 10 files just fine and generated the .zip. However, after flashing the .zip I end up with a Samsung logo, then a black screen.
The compile went through without error, so I'm a little lost as to what I should check next. From doing a little searching it seems the kernel is at fault, but what to do about that. Am I supposed to flash the kernel separate from the .zip that the CM builder outputs?
I am root using unrevoked. I made a nandroid as soon as I rooted. I have since removed a bunch of the crap-ware and I would like to try custom roms. But I cant seem to make another nandroid backup. I have tried to do it through ROM Manager and through the volumedown+power. Both take me the the white evo screen and it just sits there. I haev been patient, but 45 minutes is long enough I think. I know y'all see this stuff all the time and it gets frustrating but I really have tried to understand and to read and to search and I haven't found a fix for this.
View 1 Replies View RelatedAfter following the guide to rooting, my phone is now stuck on the white "htc evo 4g" screen. It will boot up to that, then restart, and repeat.
View 4 Replies View RelatedI have an app which uses 3 different spinners to allow users to choose from some options. Iīve added those spinners to my layout without editing most of itīs properties and this way it works for most of my users. Unfortunately most isnīt all and then some of them started complaining that the list of options is showing text in white with over a white background! Iīd like to know if thereīs a way (or a property) so I can force those spinners to show the options list using text in black.
View 7 Replies View RelatedI am running Bugless Beast v5 with the Evolution theme on my Droid1. Is there any way to change my clock in my top notification bar from white on white to black on white?
View 13 Replies View RelatedI rooted my Inc with the Evo tool, and installed a ROM through ROM manager, after deciding that I did not want to keep the ROM, I tried to restore back to the stock rooted ROM I had before through the clockworkmod/nandroid options. Now the phone is stuck at the white screen that reads, "htc incredible" and none of the buttons will cause anything to happen. I was debating on doing a battery pull and restarting, but I believe I read somewhere that doing so would brick the phone.
Update: Did a battery pull and was able to boot into the HBOOT and run the nandroid recovery again, I am trying it now to see if I can get back to the original ROM.
Update:Update:
After rerestoring the phone, the boot animation runs all the way through and the phone starts back up.
Flashed a Fresh ROM, did a wipe cache and dalvik before flashing but now I'm stuck in the white htc evo 4g screen. Tried to reflash didn't work. I've pulled out the battery and powered on while holding volume down. This is what the screen reads:
SUPERSONIC EVT2-3 SHIP S-OFF
HBOOT-0.97.0000
MICROP-041f
TOUCH PANEL-ATMEL224_16ab
RADIO-2.15.00.09.01
Aug 19, 2010
I can boot into ClockworkMod Recovery v2.5.0.1 but my backup and nandroid files can't be located. Sometimes I get the Android with the exclamation point, sometimes not. PCIMG36.zip image can't be found either. I think my phone is screwed! I've searched through the forums and googled and tried out a many things but to no avail. Also, does doing all this through a Mac make a difference?
Been creating a theme last few days. I installed it on my phone, but before doing so i was a good boy and did a nandroid backup. Then i didnt like osme of the things i changed so i restored my backup i just did now its stuck after restoring on the white htc evo screen. NOT GOOD!! I even pulled the battery and SD Card...twice.
View 4 Replies View Related