I have tried with so many SPMDT versions to change the display driver of my Alps Note 2., which has MTK6577 Chipset. But in all those tools., can't change the drivers., when click unlock., there are nothing to select., all the values are NULL..
Here I have attached some screen shots..
View 8 Replies
i don't know if this is possible, but lot of people have problems with touch screen on our chinese Tablets Bmorn V99 with ICS with original firmware.
Screen problem is gone when Bmorn is flashed with Eken ICS firmware, but there are other things that doesn't work with Eken.
Is there any way to get two IMG files (from Bmorn and Eken), and somehow get only display drivers from Eken and repack it to Bmorn?
How to make custom rom from this cpu MT6577(STARMOBILE ASTRA). If it is same to procedure like samsung andriod..?
Divide into... kernel, rom, gapps..? I have a back up this rom from SP flash tool..
Hello there I have a problem regarding the new HTC Magic I purchased : in my text display where I read the conversations between me and my contacts... it has all of the messages I sent in 1 group together, and all of the messages my contacts have sent together. How do I change this to display the order in which they were sent and received? For example right now it is
ME : blahblahblah
ME : blahblahblah
ME : blahblahblah
You : blahblahblah
You : blahblahblah
You : blahblahblah
I ported rom from OPPO R817T for Lenovo A390 and everything is working, except the issue of 3G data. I have to replace from stock rom and the signal was already out . but in setting can not be set 3G Data and every time I make a call * 123 # signal is lost and changed to "no sim card".
View 9 Replies View RelatedHow to port JB rom to MTK6577 ICS Device.......
My device is Micromax A90s, which are similar to micromax A110 and A110 have more then 2-3 Jelly Bean ROM but we dont have any Jelly Bean ROM so i have to port it, but dont know about porting methods
I already make Custom ROM for my device but don't know about porting. Can I able to port A110 JB ROM in to my Devices.....??
A90s specifications
MTK6577 1 GHz Processor
512 MB RAM
Super Amoled 4.3' HDPI (480x800) Resolution which are only things not matched to A110..........
How to port JB ROM in A90s
Cuz A110 QHD and A90s is HDPI so m able to port it........or not...........?? Or I have one more similar device rom which are same screen resolution and camera and all other things but its hardware is different cuz its Qualcomm MSM7627a Device but screen resolution are same HDPI, so can i able to port that ROM in my A90s ........??
I have a clone Samsung Galaxy Note II N7102,
That's chip MTK 6577, but I can't load the rom on it.
The error message is firmware & chip set not match.
My 9300+ (chinese mtk6577) is dead... I have to updated wrong firmware and my phone will don't turn ON again, when I use the SP Flash Tool appears the message: "Firmware Upgrade could not be executed without PMT. Please "Download" ONLY first to create PMT on the target!
My internal partition is corrupted and i can't create PMT because my phone don't Turn On, but my USB is recognized by windows.
I'm desperately trying to install a new recovery to install new rom, the phone will not turn on anymore, when I connect it is not detected (with the usual beeping sound on your computer).
I found online a full backup of a MTK6577 (boot.img, preloads, logo, recovery, etc.) I put all these files and made the procedure of flash with the software flash tools, the operation is completed I came out the green circle all that went well, but the phone will not turn on anymore.
The only strange thing is that I can load it with the power supply, this is because I use a cable that makes you see when you are charge(see attached file),this when there is no charging source will turn off automatically.
I have buyed this phone by this store: ([URL]...), I tried to apply for a refund, but they are gone (as usual)
I tried to click on the back button (reset), but there is no button on the inside.
Any possibility of recovery in some way, even opening the phone, otherwise they are thrown money.
I have a Android Device (TV Box GV-2) which is connected to a VGA monitor with screen resolution of 1280x1024.
The Box is fully rooted and now outputs 1280x720 (HD ready).
How can I change the resolution to 1280x1024? Which system file has to be edited?
i bought a mtk6577 clone s3. My problem is sometimes i rebooted phone, after opening proximity and light sensor doesn't work. screen don't turn off in call and doesn't call the person displayed on screen when i take ear. And battery drains too much. (example: when proximity and light sensor works with %90 battery, when it doesn't work after reboot plummets to %50).Another issue is when i reboot phone, boot animation doesn't show when proximity and light sensors don't work.
View 2 Replies View RelatedI have Sharp SH837W, when I try to install CWM, I wrote it to address 0x0 and it is bricked. I know I write something over its Preloader.
I tried but can't write down preloader again.
I tried to find TestPoint, maybe I found it but I don't know what should I do with it. I connect the test point with USB -5v and connect cable but still can't write anything (I got error 5054 in SP Flash Tool).
Any guide to root the device Haipai x720D and i have seen different ways of doing it but a lot of them are in another language or appear not to be really trusty so i am afraid of trying any of them and end up with a brick..
View 9 Replies View RelatedHow to make the following phone's magnetic and orientation sensor working? Both of these sensors are not working on my phone (verified by many apps such as Z-deviceTest, AndroSensor and Android Sensor Box).
Various applications have shown that this phone has 5 sensors :
- yamaha530 Orientation Sensor : 0.25 mA by Aichi Steel
- yamaha530 3-axis Magnetic Field Sensor :0.25 mA by Aichi Steel
- bma222 3-axis Accelerometer : 0.13 mA by The Android Open Source Project
- tmd2771 Proximity Sensor : 0.13 mA by Capella
- tmd2771 Light Sensor : 0.13 mA by Capella
Phone name : Clone Samsung Galaxy III S9300
Manufacturer : alps
Model: e1901_v77_jbl1_9p017
CPU: MTK6577 Dual Core 1.0GHz
Android version : 4.1.1
Baseband version : MAUI.11AMD.W12.22.SP.V15,2012/10/08 20:09
Kernel version : 3.4.0 (root @ abc-desktop) #1 SMP PREEMPT Mon Nov 12 18:32:14 CST 2012
Build Number : e1901_v77_jbl1_9p017_20121105
Perhaps there is new ROM or kernal that can handle the sensors better?
I have MobileUncle Tooll (granted SuperUser) and ROM Manager (granted SuperUser) installed on my Goophone I5 MTK6577 BUT I still CANNOT bypass Android Recovery 3E to install the goo.zip ROM -
View 9 Replies View RelatedI just bought this phone three weeks ago and It was working well .. then I tried an App (pimp my rom) and I forgot to enable Usb Debugging mode so I restarted phone then Found a message ( Unfortunately, Launcher has stopped ) and when I press ok it shows again .. I can only switch on/off wifi bluetooth GPS and those stuff on Notification bar but I cant enable Usb debugging mode because settings crash with ( Unfortunately, Settings has stopped ) No menu No home screen .. only those messages with a useless notification bar I tried everything possible to recover this phone but failed because The computer cant define the device because of the Debugging mode and when I try to flash a rom by recovery mod it tells me signature failed Is there anything I can do for this phone? or its over?
View 4 Replies View RelatedHow-to root a Star 001s phone?
It's a new one with the MTK6577 chipset from china.
I've used SP Flash tool to replace rom, and accidently pressed "Format" instead of "Download".
now, the phone recognizes the SIM card, but could not connect to mobile network at all! also, on engineer menu, I go to Radio Information and it doesn't display my phone number. and there's a "gsm service: out of service".
I've managed to restore my IMEI using MTK6575 Imei Restore tool. but still it doesn't work
I have a china phone . has been at the root and I have to replace the boot animation and shut animation .
when I want to change the background , using root explorer I copy framework - res.apk into the sdcard . after extract it , I replace background_holo_dark.png with the image I want in accordance with the resolution and I 've changed the name background_holo_dark.png .
Then I did the zip folder framework - res.apk that I have edited , I replace the zip result into framework - res.apk and then I copy and paste into the system / framework / this . notice " the folder framework - res.apk have already exist , are you sure tu overwrite " , I tap ok but my phone stuck on the display .
I waited a while but the screen does not change . I pull out the battery and reinsert and boot , but stuck on the boot animation .
I tried pressing the home button + vol up + power no recovery option , power + vol down only a test , clear flash , boot , no recovery option , power + vol up + vol down no response .
my phone : mtk6577 mitoa300
root by Frama root
not have CMW recovery or other
USB debugging not checked
I have an ANDROID tablet with screen resolution of 600*976 which is quite rare and is not supported by many ANDROID apps....here comes the question : is it possible to change the screen resolution of display? eg 800*480?
A12(C1B2)
How to remove a specific status bar icons and change the order of icon display? I think we need to edit the smali files, but I'm not sure which one to edit.
View 2 Replies View RelatedI was wondering is there anyway to change the display on the txt messaging like the colors and the txt font.
View 3 Replies View RelatedI'm running a GOCLEVER R75 tablet. I succeeded in installing the USB drivers to Windows XP pro from the last SDK I downloaded previously.But I can't install other drivers:
C:> c:AndroidSDKadt-bundle-windows-x86sdkplatform-toolsadb devices
adb server is out of date. killing...
* daemon started successfully *
List of devices attached
Although I can see in Windows Device manager Android Phone - Android ADB Interface, some applications still write they can't see my Android device. I also can't see the tablet number.
I boot my Acer Iconia Tab A200 into fastboot mode (robot lying down and RED exclamation mark over it). I plug it into my Windows 7 (64bit) desktop computer with SDK installed, and from the directory with fastboot.exe I type FASTBOOT DEVICES but the device is not being seen, it just goes back to the prompt, like the command executed but didn't do anything. I assume this is because the drivers aren't installed. But I don't know how to install the "adb drivers".
View 4 Replies View RelatedI'm trying to use the SWM and when I have everything all set up it tells me I have no device set up. I looked to see if I could find drivers for me Xperia X10 and all I kept getting linked to was the sony PC companion that apparently had those drivers installed. When I installed it and did all the set up stuff it still wouldn't recognize my phone other than as a removable disk. I have the USB debugging turned on, .Net framework installed, and supposed the drives yet it still won't read my phone.
View 1 Replies View RelatedI take the CyanogenMod 10.3 for my Alcatel OT995, it works fine on my device, but I can't use adb command line neither other features using adb.exe ! I can only access to storage mass device, so I think I have a problem with the USB drivers which connect ADB command to my phone. I can add that before I've installed this Rom on the device, I've installed many drivers on the PC :
Firstly I installed the owner's driver provided by Alcatel in the AlcatelAndroidManager.exe package,
secondly I installed the Google USB drivers provided because I'm using Android Virtual Devices (AVD Manager) to do some developping works. I used to launch adb with "adb start-server" so it's still working, I don't obtain any device in the list with "adb devices", why don't I get it ?
I've realized some cleaning actions : I uninstalled the USB drivers of Alcatel's software, I uninstall the Google USB driver , to finish I reboot the PC but it don't changed anything I tried to apply this (well explained) post without any success :URL.... I can't find "Android devices" category, neither "Usb Adb" entry... so my device is not recognized in the "Settings Panel". However the storage mass device appears as a volume named "
How to do this? is this possible? if yes, where is the driver.
View 5 Replies View RelatedI have been trying to root my Micromax A25 but to no luck. And I have been unable to find the drivers for it.
View 2 Replies View RelatedI cannot find out how to add drivers to a ROM
I don't have a backup of the stock ROM, however i have a ROM in which everything apart from WiFi works ( 5 point touch screen, all hardware buttons, sound, screen)
This Q88 ROM is downloaded from [URL] .....
I tried the cyanogenmod ROM from ANONFBI [URL] ..... and nothing works apart from the wifi driver no touch, no volume buttons
I would like to extract the drivers from the q88 rom and add them to the cyanogenmod rom.
I've never been able to get the camera working its the single front camera it doesn't bother me its not very good
I tried this thread [URL] .....
However when i load a driver the ported PORTED JB-4.1.1 rom doesn't boot up
I see it has camera drivers but i dont know how to install them
I have attached a LSMOD from the q88 rom
i have downloaded several drivers, all are .inf format for Win764BIT because i am under Win864BIT .. but when i am trying to install the driver via device manager it says the drivers are not digitally signed .. and when i try using SP Flash Tool to test to flash stock rom to my currently working device .. it does not start, so i think it is not detected .. I am using a PH Version of CUBOT C11 (MT 6572) Device .. i can't try to make it work.
View 9 Replies View Related