My 9300+ (chinese mtk6577) is dead... I have to updated wrong firmware and my phone will don't turn ON again, when I use the SP Flash Tool appears the message: "Firmware Upgrade could not be executed without PMT. Please "Download" ONLY first to create PMT on the target!
My internal partition is corrupted and i can't create PMT because my phone don't Turn On, but my USB is recognized by windows.
View 3 Replies
So yeah, basically my Kies crashed while it was updating firmware and now I can't connect my phone to my PC anymore, it just doesn't recognize it. Windows just says something about corrupted device but kies can't recognize it either. And here's the really great stuff. I can't even boot the damn device! It just gives me thing weird logo that has mobile phone and my computer on it, and then some yellow triangle with exclamation mark in between and it doesn't go away. I've tried every button combination and hard-boot with removing the battery but no luck. I'm really really frustrated because I can't use this thing at all now! What a great update software you got there Samsung, really great (endrant). So can anyone give any pointers what I should do?
View 5 Replies View Relatedhow to stop the annoying media scan on this Galaxy S Captivate, which included tutorials on rooting and getting sdk files.
Now I would like to upgrade to the latest firmware. I found out that I needed something called Kies, so I downloaded it and followed the instructions - hooked up the phone after checking debugging, etc, but I got an error that said I don't have authorization or something. I started researching a bit, but got quickly overwhelmed with things I'd never heard of like "Odin".
How to upgrade firmware using Linux. I ask because it seems that all firmware upgrade downloads are pitched to windows.
View 1 Replies View RelatedMy phone wont boot up its a samsung exhibit 4g and it running gingerbread 2.3.3 it says firmware upgrade failed tried everything only post if you have a link or know what your doing im now stuck on blackberry with out my presious bikerace game.
View 6 Replies View Relatedyesterday I flashed my Galaxy Ace 2 with the JellyCreamMessi10 Rom.
The update worked fine, but not so the Rom. It looked quite well, but didn't detect my SIM Card.
So I wanted to downgrade my phone again to the original firmware with Odin, which also worked well until the phone said "Now rebooting...".
Nothing happened, the phone did not reboot, so that I powered it off and tried to power it back on.
Unfortunately, the Ace 2 does not react on any button, display stays completely black.
Tried several things like connecting the phone to USB and inserting the battery, afterwards, but nothing happens.
For me it looks like my phone is broken, but how I can get it back to live?
I would like to know if it is possible to upgrade/downgrade an android phone (samsung mostly) with official firmwares without the need to root? The reason is that some testing is needed on these devices and only with official firmwares it would be valid. And at will it would be nice to be able to switch versions for different test purposes.
View 1 Replies View RelatedI bought LG VU II (F200L) in perfectly working condition, it almost new. After installing LG PC suite and connecting it said new firmware update is available so I proceeded which was done successfully but since then touch screen is not working properly.
Usually it responds ok but main issue is back button is not working anymore, and sometimes when I press power button to unlock screen it responds very weird and not so responsive as well as sometimes doesnt responds or opens apps that I havent even clicked.
I tried to restore, emergency restore, LG Flash tools and used correct KDZ files to flash roms successfully but nothing seems to resolve this issue.
I have a Galaxy s4 (i9500) and a linksys cisco e900 router
Recently my isp asked me to upgrade the firmware
Until I updatee my firmware everything was working fine
After the firmware upgrade I am experiencing the following issues:
At the beginning when I conmect to my wifi everything works fine for the first 5 min, all apps work flawlessly, then suddenly my phone only uploads date (up arrow only) but no down arrow n then my apps such as whatsapp, fb messenger, etc do not recieve any data until I goto those apps and stay in there for about a min. Then I get all my whatsapp messages sent about a min ago . But my browser seems fine..and the speed there is good.
How do i upgrade my firmware?
View 8 Replies View RelatedWhy do i need Windows PC to upgrade my LINUX phone? Its unbelievable
View 7 Replies View RelatedI'm trying to understand how end-users will upgrade their device firmware from Android ver. X to X+1. A new build of Android contains system.img and userdata.img (among others). system.img is read-only, so I don't see any problem with simply replacing the user's existing copy. However, simply overwriting userdata.img with a newer version would destroy all of an end-users application data (wouldn't it?).
I'm trying to understand how this process will work for our Android- based device. It seems that the designers of Android must have had a plan for doing this without the user losing all of their data, but I can't find any documentation about this. Googling for this information yields lots of pages containing hacker- level instructions (e.g. adb commands) -- still no idea how this process was envisioned to work for average end-users.
Hi - I just bought a Desire and can see that the Calendar program is not as good as it should be.
1. If a multiple day all day event is tapped when the user is on the month view, the next window simply shows the event on that day as an all day event. It should really show the start and end dates of the event. Currently the only way I can find to see this information is by editing the event then cancelling the edit screen.
2. If a "non-all day" event is created that starts on Monday @ 11:00am and ends on thursday at 3:00pm, then when I tap on the event in month view it shows the event happening SEPARATELY on every day between 11am and 3pm. It should say Monday 11am - Thursday 3pm. Currently the only way I can find to see this information is by editing the event then cancelling the edit screen. These are hard to explain but easy to see when you try it on the phone.
I think these issues need to be fixed in any software/firmware upgrade that there may be. Loving the phone though. Glad I went for it instead of iPhone
I purchased the phone today at 8:20AM CDT. It is now 1:10PM CDT and I have not gotten any work done. That's over 20% of the day already drained. All the tweaks and technology that has gone in this phone, and neither Sprint or Samsung were able to slow down time. At this rate, I won't be able to even go through a full day without not spending most of my time on the phone. I've been told that time management will be better as time goes on, but I'm worried I might need to get spare hours in a day. Lets hope there is a firmware update soon that will help with this. I am sure my friends, family, and employers will really appreciate it.
View 30 Replies View RelatedIf I upgrade the firmware to Froyo 2.2, can I downgrade again if I find it too buggy like others have?
View 5 Replies View RelatedHow do i upgrade my SE Xperia X10 from 1.6 to 2.1 of the firmware version?
View 12 Replies View RelatedI am using Samsung Galaxy S3, model GT-I9300. So I accidentally deleted a huge file in my phone earlier and I was trying to recover the file by rooting the phone and using this apps called DiskDigger. I obviously made a huge mistake as I have now made it worse. Long story short, I've used tips from multiple websites and youtube videos so now my phone is basically forever showing this right now
After reading a few threat, some people suggested to hold the volume down + home + power but this made no difference. I can't switch it off, it will blank out for 3 sec and go back to saying "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again". I installed Kies but the device will not connect to my laptop for some reason. I have uninstall and reinstall Keis a few times. I've tried every single USB port on my laptop and even the extended USB port but none of them work too. I used my sister's android for Kies and it's working fine, so the problem is my phone.
I have already downloaded ODIN 3.07. I read in one of the thread that I have to put in a .tar file. Another person had the same problem as me (Stuck with 'Firmware Upgrade Issue') and it seemed to be working for him but I don't know what the .tar file is.
I am using Samsung Galaxy S3, model GT-I9300. So I accidentally deleted a huge file in my phone earlier and I was trying to recover the file by rooting the phone and using this apps called DiskDigger. I obviously made a huge mistake as I have now made it worse. I've used tips from multiple websites and youtube videos so now my phone is basically forever showing this right now
After reading a few threat, some people suggested to hold the volume down + home + power but this made no difference. I can't switch it off, it will blank out for 3 sec and go back to saying "Firmware upgrade encountered an issue. select recovery mode in Kies and try again". I installed Kies but the device will not connect to my laptop for some reason. I have uninstall and reinstall Keis a few times. I've tried every single USB port on my laptop and even the extended USB port but none of them work too. I used my sister's android for Kies and it's working fine, so the problem is my phone.
I have already downloaded ODIN 3.07. I read in one of the thread that I have to put in a .tar file. Another person had the same problem as me (Stuck with 'Firmware Upgrade Issue') and it seemed to be working for him but I don't know what the .tar file is.
I was desperate to get my deleted file back. Right now I don't care if that file is gone, I just hope I get my phone back.
Purchased my Galaxy in Italy in September. Upon returning to Australia, I found Voice Search on Android Market and downloaded it. I was very impressed with it.Since then I have upgraded my firmware to IH7 via NPS. Voice Search disappeared and is no longer available on the Market. I found a thread with links to a voice search & voice dialer apks, however have had no luck once installed, as they display errors when run.
View 2 Replies View RelatedI just recently purchased a Samsung Galaxy GT-17500L (its a Bell Canada phone). After purchasing the phone (which was originally unlocked) I bought a Solo mobile sim-card, which was needed in order to use the phone on my Solo monthly plan. Everything was working fine until I decided to try and update the firmware from 1.5 to 1.6; unfortunately, like a few others from Canada, I didn't properly read the guide and after the upgrade, the phone was "re-locked" and wasn't accepting my sim-card. After going through the guide posted on Pg.4 here (Bell Canada users and Brazilian Users - Galaxy 7500L (notice the L)), with the help of Rasta-Man FB posts and others, I was able to get my phone back to the original firmware, but now I'm having reception issues. The phone will at times pick up the Solo Netowork (I'm still using the original solo sim card), but then drop it after 10 minutes and just say there is no service. When I search for networks, it recognizes the Solo one (I'm guessing b/c of the S.C) but it isn't able to connect.
View 3 Replies View RelatedHow to make custom rom from this cpu MT6577(STARMOBILE ASTRA). If it is same to procedure like samsung andriod..?
Divide into... kernel, rom, gapps..? I have a back up this rom from SP flash tool..
I ported rom from OPPO R817T for Lenovo A390 and everything is working, except the issue of 3G data. I have to replace from stock rom and the signal was already out . but in setting can not be set 3G Data and every time I make a call * 123 # signal is lost and changed to "no sim card".
View 9 Replies View RelatedHow to port JB rom to MTK6577 ICS Device.......
My device is Micromax A90s, which are similar to micromax A110 and A110 have more then 2-3 Jelly Bean ROM but we dont have any Jelly Bean ROM so i have to port it, but dont know about porting methods
I already make Custom ROM for my device but don't know about porting. Can I able to port A110 JB ROM in to my Devices.....??
A90s specifications
MTK6577 1 GHz Processor
512 MB RAM
Super Amoled 4.3' HDPI (480x800) Resolution which are only things not matched to A110..........
How to port JB ROM in A90s
Cuz A110 QHD and A90s is HDPI so m able to port it........or not...........?? Or I have one more similar device rom which are same screen resolution and camera and all other things but its hardware is different cuz its Qualcomm MSM7627a Device but screen resolution are same HDPI, so can i able to port that ROM in my A90s ........??
I have a clone Samsung Galaxy Note II N7102,
That's chip MTK 6577, but I can't load the rom on it.
The error message is firmware & chip set not match.
I'm desperately trying to install a new recovery to install new rom, the phone will not turn on anymore, when I connect it is not detected (with the usual beeping sound on your computer).
I found online a full backup of a MTK6577 (boot.img, preloads, logo, recovery, etc.) I put all these files and made the procedure of flash with the software flash tools, the operation is completed I came out the green circle all that went well, but the phone will not turn on anymore.
The only strange thing is that I can load it with the power supply, this is because I use a cable that makes you see when you are charge(see attached file),this when there is no charging source will turn off automatically.
I have buyed this phone by this store: ([URL]...), I tried to apply for a refund, but they are gone (as usual)
I tried to click on the back button (reset), but there is no button on the inside.
Any possibility of recovery in some way, even opening the phone, otherwise they are thrown money.
i bought a mtk6577 clone s3. My problem is sometimes i rebooted phone, after opening proximity and light sensor doesn't work. screen don't turn off in call and doesn't call the person displayed on screen when i take ear. And battery drains too much. (example: when proximity and light sensor works with %90 battery, when it doesn't work after reboot plummets to %50).Another issue is when i reboot phone, boot animation doesn't show when proximity and light sensors don't work.
View 2 Replies View RelatedI have Sharp SH837W, when I try to install CWM, I wrote it to address 0x0 and it is bricked. I know I write something over its Preloader.
I tried but can't write down preloader again.
I tried to find TestPoint, maybe I found it but I don't know what should I do with it. I connect the test point with USB -5v and connect cable but still can't write anything (I got error 5054 in SP Flash Tool).
Any guide to root the device Haipai x720D and i have seen different ways of doing it but a lot of them are in another language or appear not to be really trusty so i am afraid of trying any of them and end up with a brick..
View 9 Replies View RelatedHow to make the following phone's magnetic and orientation sensor working? Both of these sensors are not working on my phone (verified by many apps such as Z-deviceTest, AndroSensor and Android Sensor Box).
Various applications have shown that this phone has 5 sensors :
- yamaha530 Orientation Sensor : 0.25 mA by Aichi Steel
- yamaha530 3-axis Magnetic Field Sensor :0.25 mA by Aichi Steel
- bma222 3-axis Accelerometer : 0.13 mA by The Android Open Source Project
- tmd2771 Proximity Sensor : 0.13 mA by Capella
- tmd2771 Light Sensor : 0.13 mA by Capella
Phone name : Clone Samsung Galaxy III S9300
Manufacturer : alps
Model: e1901_v77_jbl1_9p017
CPU: MTK6577 Dual Core 1.0GHz
Android version : 4.1.1
Baseband version : MAUI.11AMD.W12.22.SP.V15,2012/10/08 20:09
Kernel version : 3.4.0 (root @ abc-desktop) #1 SMP PREEMPT Mon Nov 12 18:32:14 CST 2012
Build Number : e1901_v77_jbl1_9p017_20121105
Perhaps there is new ROM or kernal that can handle the sensors better?
I have MobileUncle Tooll (granted SuperUser) and ROM Manager (granted SuperUser) installed on my Goophone I5 MTK6577 BUT I still CANNOT bypass Android Recovery 3E to install the goo.zip ROM -
View 9 Replies View Related