HTC Desire : Bricked My Phone With ROM Install - "android" Logo Shimmering Across Screen
Jul 28, 2010
In a bit of panic here! I rooted my HTC Desire via unprovoked and installed ROM Manager (bought a license) and downloaded Opendesire from within this application. The ROM downloaded I did a backup and the phone is now in a continuous loop with the "android" logo shimmering across the screen.
I cant seem to get into recovery at all and the only way to power the phone off it to remove the battery! Has anyone got any ideas for me, I have been to the toilet 3 times in 30mins so far
View 7 Replies
Jul 7, 2012
I have a Motorola XOOM WIFI US version (don't remember exactly the Android version, but it's 3 point something). It was rooted and unlocked, but I decided to relock it, so I followed a tutorial to do it.
Everything worked fine and, despite the long process and the several steps, I didn't have any problems at all, but when I finished flashing the images from the usb, the tablet automatically rebooted and now it's stuck at the boot screen, with the Motorola logo.
I have read some topics with the same issue and I always see the same solution: go into the recovery mode, but the problem is that I can't even access the recovery mode. When I push the vol + button to select the "recovery" option, I just got a message "Reading ODM fuse: 1", and there's nothing else I can do. I can't even shut the tablet down.
View 1 Replies
View Related
Mar 18, 2012
i tired updating my galaxy s2 i9100g with ics (wasnt aware that its not supported) with odin and it showd me fail and now i am unable to switch it on it just shows phon and yellow triangle and computer logo when i connect it ot pc odin recognizes but kies not can sum1?is it bricked ?
this what odin showd when i tried to update
<ID:0/015> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9100_SEB_I9100XXLPQ_I9100OXXLPD_I9100XXLPQ.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
[code]....
View 4 Replies
View Related
Feb 20, 2013
i tryed to install cwm from command comport in android so my phone bricked and when i start it black screen apperas so want to install cwm from zip.i can run only android system recovery(3e) so is any .backup file or .zip file to i use as apply update from sdcard or restore user data to install cwm than i can flash rom and new android version and hope it will works
i have tryed recovery-clockwork-5.0.2.6.zip it starts flashing and i got
Error: invaild OTA package
update.zip is not correct
Installation aborted
View 1 Replies
View Related
Dec 24, 2013
I have a Double Power EM63 tablet from Walmart. I believe it is identical to the Ematic EM63 and the MID-AM789 (Google "AM789" for specs since I apparently can't post links yet). I rooted it using Shaume (It's not in english, I just clicked the button that said "root"). I was trying to improve the tablets gaming performance, so I installed the Chainfire 3D driver, and now my tablet won't boot. It gets stuck on the "DOPO" logo, never gets to the boot animation. I can enter recovery mode, so I tried the "wipe/reset" option, but it didn't work. I think I need the stock ROM or a compatible custom ROM to flash to the tablet so it can run again, but I can't find any ROMs that would work and don't really know how to flash it.
View 8 Replies
View Related
Aug 12, 2010
I've only had it for a week, so how do I exchange it?, or what do I do?
In case you wonder how I know, the screen goes to blackness after the galaxy S screen
View 19 Replies
View Related
Apr 12, 2010
I can root a g1 with ease but I sort of got into trouble with the behold. This might sound stupid but do I need to root the phone before I install the port galaxy 1.6? I just did this.
1. download odin here Odin Multi Downloader v4.03.exe
2. download any Of BH_MAN ODIN Ready Rom's
3. download winrar ( google it) to extract the BH_MAN zip file.
4. follow these instruction
Quote:
1. Unzip the zip file.
2. Open Up ODIN Multi Downloader
3. Click the OPS button and choose Behold2_partition.ops
4. Click the PDA button and choose the md5 file, You will get error message" invalid image...," but ignore it.
5. Turn off Phone.
6. Plug phone into USB.
7. Put phone in download mode (Vol Down + OK + END Button)
8. Wait till detected and press START.
9. Enjoy the Port.
And my phone was stuck on the android logo. do I need to root first and where can I find this? Is this where I go.
http://androidforums.com/all-things-root-behold-2/22470-persistant-root.html
Can I do this method even though my phone is stuck on the android screen? How can I get back to default at least?
View 9 Replies
View Related
Oct 7, 2010
had my evo on charge and went to sleep with remote pc running, when I woke up it was really hot and kept restarting at the 4G animation. I mean, it was seriously on repeat, says 4g, then starts over again, then sprint 4g and restart. I can't get it to boot. I've tried booting with the usb connected, sd card in and out, everything. Nothing works. I even went to the recovery like I was doing an update to get it to at least reflash the firmware or something and it fails. Keep in mind, I updated a couple weeks ago with the newest EVO software manually (the one without the fps cap), so the file should still be on the SD card exactly how it was when I updated the software last.
This is what it gives me:
E:can't open /cache/recovery/command
E:can't mount DATA:data/recovery/log
--Install from sdcard...
Finding update package...
Opening update package...
Verifying update package...
E:failed to open /sdcard/update.zip (No such file or directory)
E:signature verification failed
Installation aborted.
E:Can't mount DATA:data/recovery/HTCFOTA/update_result.log
E:Can't mount DATA:data/recovery/OMADM/update_result.log
E:Cant mount DATA:data/recovery/log
View 8 Replies
View Related
Oct 31, 2010
My phone was all ok until i tried to change to a new sd card..when i changed to a new sd card and tried to switch on my phone, my phone stop on the htc logo and went blank and will not switch on! and when i switched back the previous sd card, the same thing happened and the phone will not switch on.
View 2 Replies
View Related
Aug 30, 2013
I tried to flash gtr 7.8.6 rom to lg optimus one phone according to the instructions but now it is stucked at the lg logo screen.
View 2 Replies
View Related
Aug 16, 2010
Alright so I was on froyo stock image frg01b rooted. I tried to install nextheme over it. I tried to go into recovery, but got the exclamation point. Went back into froyo, flash the alternative recovery, then flashed back to clockwork. It goes into recovery fine now.
installed a .zip file (the nextheme)
reboot
it hangs on moto logo
Now try to go back into recovery to flash backup. It wont go into CW and now I see an exclamation point. Now I went into the stock recovery menu, wiped data did factory reset. Wiped cache.
reboot
hangs on moto logo
What did I do?
I tried putting stock 2.1 on SD and renamed it update.zip and tried to flash with the stock recovery, but it says failed to access /sdcard .zip and then go back to the (stock) recovery menu. Clockword is gone and so is any and all ROMs.
View 16 Replies
View Related
Jan 7, 2010
Its not doing anything thing? Like all it says is HTC and its got like a spotlight on it, I am charging it now so maybe its because I needed to be charged? a little help!
View 2 Replies
View Related
May 20, 2010
i am using sense 2.2 rom on my rooted htc hero with no problems on my 16gb microsdhc card. however when i used a kingston 32gb microsdhc i just purchased i can't seem to get it to work. i have formatted the sd card on my computer then i partitioned the card the same way i did with my 16gb card, then i partitioned ext2 to ext3 but when i restarted my phone with the 32gb card inside the screen was stuck on the htc logo. can anybody help please?
View 15 Replies
View Related
Oct 13, 2012
Ok i recently rooted my LG C800 or Mytouch Q using SuperOneClick which went well. However, When i tried to install a new rom using ROM Manager of the play store i first backed up my current rom and when it reboots its stuck on the boot LG logo. I have tried going into recover mode and it will show the android unboxing but a few seconds later it goes back to the LG logo. I don't want to say its completly bricked as i do get the LG logo.
View 4 Replies
View Related
Aug 25, 2010
I've rooted my Desire on o2 have version 0.80 of the boot loader. I applied the defrost rom version 2.7 following this guide. Droid Den - Phone Guide: How To Install Rooted Android 2.2 On Your HTC Desire - Droid Den. It went through applying the ROM but now I just have it stuck on the o2 splash screen and going no further. Can't seem to find a backup.zip anywhere on my ROM and thought to back out the change. What's the best way to go? Re-flash again?
View 19 Replies
View Related
Feb 17, 2014
I should have just left it as it was out of the box..So after attempting to install a custom rom (4.4.2 Play edition)my s4 is stuck at the Samsung I9505 boot screen. I wiped the 'Dalvik cache' 'System' and 'cache' partitions in TWRP as I was following along with a Youtube video (that didn't work). When I tried to flash the custom ROM it automatically said failed. After giving up and turning on the phone I found that I'm stuck at this screen.
Have I bricked the phone? $550 could have gone down the drain just like that. I don't want to touch it without any advice and make everything worse. My only hope now is that I've managed to wipe the original software and it has nothing to boot from.
Why did the ROM install fail in the first place? I had it copied on the SD card. It was zip file.I can still access TWRP just fine and my SD shows up with the custom ROM still there, it's just whenever I hit install it fails in under a second.
View 2 Replies
View Related
Apr 29, 2014
i have tried to install kitkat version for galaxy y duos s6102,for that i installed clockwork mod n cynogenmod n kitkat file..but after installing the screen goes blank,nothing appears except Samsung logo screen,
View 2 Replies
View Related
Nov 25, 2010
Does anyone know how to get rid of the green Android logo when you receive a phone call AND you dont have the callers photo saved. I can think of much nicer things to see than the logo, nothing personal but you know what I mean
View 4 Replies
View Related
Apr 29, 2013
So I made the mistake of attempting to root my new HTC one V without knowing what I was doing. I currently can't get past the bootloader screen. I've attempted installing the RUU for my phone with no success. I've resorted to extracting the rom.zip from the RUU, renaming it PK76IMG.zip (required for hboot to recognize it) and putting it on my sd card. Everything works fine up until the end when it says "hboot version is older! Update failed"
View 2 Replies
View Related
Nov 28, 2010
This is from my original thread from XDA. It has had numerous hits and questions, which made me realize how so many people have had similar problems. There are solutions on XDA too, but the problem is that there is no one solution to the issue. There are a lot of solutions, but this is a aggregate of all the solutions. I will add FAQs as and when questions are asked, and will keep it as updated as possible. Criticisms, comments and questions are welcomed. HOW TO UN-BRICK AN SLCD BRICKED DESIRE Elementary Frequently asked questions have been included at the latter part of this post. Guide level: Beginner-Advanced (Beginners should read the FAQ at the end, before reading the instructions. Also be well versed with the Requirements I've listed, by reading from the articles listed, before you attempt the methods listed in the post). Caution. CREATING A GOLD CARD IS THE MOST IMPORTANT AND PRIMARY STEP TO DO BEFORE YOU ROOT YOUR DEVICE, WHETHER IT IS BRANDED OR UNBRANDED. IF YOU EVER WANT TO RETURN YOUR PHONE FOR WARRANTY, THIS IS ESSENTIAL, AND CAN GET YOU OUT OF MOST CASES OF SLCD BRICKS. What was my problem (a.k.a What is an SLCD bricked Desire? a.k.a Why is there nothing on my Desire screen after running an RUU/flashing an incompatible ROM)?......
View 2 Replies
View Related
Oct 29, 2010
I was wandering if it possible to install the default android keyboard on the Desire? Don't get me wrong, I love the HTC keyboard but am just trying out a couple of different keyboards out of interest.
So i anyone knows a link the the apk that would be brilliant. Just to clarify, I mean the one with black keys. I tried searching but could only find a modified version of the HTC one.
View 6 Replies
View Related
Mar 19, 2014
I finally updated my nexus after seeing it in my notification column. All seemed okay so let it get on with it.But when I thought it was ready I cannot get further than the four moving coloured circles. I have tried to factory reset and delete cache but has made no changes. I have been in contact with google play who now say there is no more actions that can be done so will need replacement.
View 1 Replies
View Related
Jan 21, 2014
Recently I have rooted my android tablet and I was exploring what I could do. One guy was telling me about an app that can work with performance in game(ChainFire 3D). He said it lowers the pixels in the game to run better. I tapped the install button and it said rebooting now. It then started to reboot but then proceeded to get stuck at the boot screen. I tried doing a hard reset but it is still stuck. I have also tried flashing the stock rom, but I get installation aborted when I try and install it.
View 4 Replies
View Related
Jul 22, 2013
I was using my ramos w17pro and it was good.
When i tried to update it to 4.1.1 it shut down and never started again..
It's screen does not light up but i can feel the processor heating.
View 5 Replies
View Related
Apr 27, 2012
So I was trying out the CM7 for xperia arc by the freexperia team. It was epic. so i also tried the CM9 release by them..
-> I downloaded the CM9 anzu for my arc S
-> Extracted the files
-> Used fastboot to flash boot.img
-> And then: fastboot reboot
Instead of the FreeXperia splash screen welcoming me.. i was given a black screen.. The phone does turn on.. but then there is nothing. No splash screens. nothing.
Is there anyway to boot straight into CWM?? recovery?? Did i brick my phone for good?
View 2 Replies
View Related
Nov 29, 2012
I have just bricked my tablet by puting another recovery.img.. and now the tablet only shows boot screen. How can i connect it to pc to usb adb to restore it...or another method?
tabletrestigio 5197D ultra
View 1 Replies
View Related
May 23, 2010
I have this stange sim logo on my desire, in the notifications panel, when I pull it down it is just blank. I'm using a 256k sim card and I've tried a 128k and a 32k sim card which don't do it.
View 4 Replies
View Related
Mar 25, 2010
I was messing around with the camera and suddenly it goes to the White Screen with the Motorola logo in the middle. Its just stuck there. I've pulled the battery for at least 30 minutes, tried holding down, up, camera, while turning the phone on, no luck. Every time I power it up its just the same white screen. It's doing nothing. Are there any other manual methods of resetting this thing?
View 6 Replies
View Related
Apr 23, 2010
I was wondering how to add my own picture or image to the bookmark so i wont have to see the plain browser/ dolphin logo on my home screen,is there a certain app that i can do this with or some way of doing it with pandahome or a different home replacement?
View 2 Replies
View Related
Aug 6, 2010
I recently purchased a Desire from China, and have gone through the setup.However I want to find out if there is any way to get rid of all the Asian English languages and put Australian, British and/or US English onto the phone, as when it asks me which language, it doesn't show that option.Is there any way to install these languages onto the phone?
View 6 Replies
View Related
