General :: HTC One V Bricked - Can't Get Bootloader Screen?
Apr 29, 2013
So I made the mistake of attempting to root my new HTC one V without knowing what I was doing. I currently can't get past the bootloader screen. I've attempted installing the RUU for my phone with no success. I've resorted to extracting the rom.zip from the RUU, renaming it PK76IMG.zip (required for hboot to recognize it) and putting it on my sd card. Everything works fine up until the end when it says "hboot version is older! Update failed"
View 2 Replies
Mar 11, 2014
I've got Samsung S4 SSGH I337 bricked. I was on 4.2.2 until I was curious to get the 4.4 update. However, after reading on the forums it said you cannot upgrade to 4.4 directly (Except OTA which I never got). You first need to upgrade to 4.3 and then upgrade to 4.4 using the update patch. All went successfully until I though 4.4 seem no good to me as the root method was not available and I personally didn't find 4.4 to be much different than 4.2.2.
I tried to downgrade, without knowing a thing about Knox, by updating a ATT Stock Root MF3.zip update. It went through but with some errors, which I don't remember. I was still with the same 4.4 as the update was a waste.
I then tried to downgrade to 4.2.2 flashing the I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar with Odin. This never worked and I bricked my phone. The phone is not unable to boot and comes up with a screen - Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
Kies doesn't recognize the device. It just keep saying "Connecting". I later learnt that it's the Knox Bootloader that is not downgrade able. I tried flashing the leaked 4.4 firmware for SGH I337 to no luck.
View 2 Replies
View Related
Jan 21, 2014
Recently I have rooted my android tablet and I was exploring what I could do. One guy was telling me about an app that can work with performance in game(ChainFire 3D). He said it lowers the pixels in the game to run better. I tapped the install button and it said rebooting now. It then started to reboot but then proceeded to get stuck at the boot screen. I tried doing a hard reset but it is still stuck. I have also tried flashing the stock rom, but I get installation aborted when I try and install it.
View 4 Replies
View Related
Jul 22, 2013
I was using my ramos w17pro and it was good.
When i tried to update it to 4.1.1 it shut down and never started again..
It's screen does not light up but i can feel the processor heating.
View 5 Replies
View Related
Apr 27, 2012
So I was trying out the CM7 for xperia arc by the freexperia team. It was epic. so i also tried the CM9 release by them..
-> I downloaded the CM9 anzu for my arc S
-> Extracted the files
-> Used fastboot to flash boot.img
-> And then: fastboot reboot
Instead of the FreeXperia splash screen welcoming me.. i was given a black screen.. The phone does turn on.. but then there is nothing. No splash screens. nothing.
Is there anyway to boot straight into CWM?? recovery?? Did i brick my phone for good?
View 2 Replies
View Related
Nov 29, 2012
I have just bricked my tablet by puting another recovery.img.. and now the tablet only shows boot screen. How can i connect it to pc to usb adb to restore it...or another method?
tabletrestigio 5197D ultra
View 1 Replies
View Related
Jul 7, 2012
I have a Motorola XOOM WIFI US version (don't remember exactly the Android version, but it's 3 point something). It was rooted and unlocked, but I decided to relock it, so I followed a tutorial to do it.
Everything worked fine and, despite the long process and the several steps, I didn't have any problems at all, but when I finished flashing the images from the usb, the tablet automatically rebooted and now it's stuck at the boot screen, with the Motorola logo.
I have read some topics with the same issue and I always see the same solution: go into the recovery mode, but the problem is that I can't even access the recovery mode. When I push the vol + button to select the "recovery" option, I just got a message "Reading ODM fuse: 1", and there's nothing else I can do. I can't even shut the tablet down.
View 1 Replies
View Related
Aug 1, 2013
My phone is stuck in boot-loader screen and not even showing me Google logo on selecting Start from boot-loader screen, when connect charger then also it shows me boot-loader screen
Steps which i followed to install 4.3 manually is:
1. fastboot erase boot
2. fastboot erase cache
3. fastboot erase recovery
4. fastboot erase system
5. fastboot erase userdata
6. fastboot flash bootloader <bootloader_filename_.img>
7. fastboot reboot bootloader
8. fastboot flash radio <radio_filename_.img>
9. fastboot reboot bootloader
10. fastboot -w update <Rom_filename_.img>
Step 1-9 executed successfully but at step 10 while writing system.img installation got stuck and i waited for 40 mins but nothing happened
Repeated above step 3 times. Need to recovery my nexus 4 to its normal state
View 7 Replies
View Related
Mar 3, 2014
I recently used chainfire3d so you know i thought it would work so i tried it out and it said it would reboot the device, then it was going to reboot but it just stayed there nothing else happened. Did i break my phone because i already tried MythTeams stock frimware recovery and it still stuck. Also I am trying to use RSD to fix it but im having no luck so far
View 1 Replies
View Related
May 26, 2014
I have an Allwinner A10 clone (Kurio 7), it is designed for kids but otherwise a standard android tablet. After hours of googling I rooted and installed CWM & Gapps (not included in the stock ROM). So far so good. The stock ROM was causing issues with some apps, it needed to go.
I flashed CM10 and it worked but no touch screen. It needed a compatibility flash to make it work. You can guess what's coming. I picked the wrong one and now the device does the following:
Reboot loop
Black screen (backlight though)
PWR+Vol up no longer gets to recovery
Vibrates constantly between reboots (due to wrong patch I'm guessing)
ADB picks up the device for a split second between reboots but "adb reboot recovery" does nothing. Even when using wait command. Tried "fastboot flash recovery cwm.img" after wait command, no luck. Is there anything else I can try?
View 1 Replies
View Related
Aug 12, 2010
I've only had it for a week, so how do I exchange it?, or what do I do?
In case you wonder how I know, the screen goes to blackness after the galaxy S screen
View 19 Replies
View Related
Sep 23, 2010
I originally rooted my phone with Unrevoked before Froyo came out(can't recall the version). Once froyo came out, I backed up the phone with clockwork, then flashed over Netarchy's stock rooted froyo(backed up afterwards too). Today I went to the link on the unrevoked twitter page and flashed 3.29 to my phone. I flashed it using the update from SD card option in clockwork. Here's the issue. Afterward my phone rebooted and will not go past the bootloader screen. I'm thinking no biggie, I'll just go back into recovery and load a backup or an older working rom. Well there is no recovery. All I get is the phone with a red triangle. So I'm freaked out and thought, well lets just go back to the stock RUU. Well thats getting an bootloader version error. WHere can I go from here? is there a way for me to get those backups I made loaded from the bootloader screen?
View 30 Replies
View Related
Mar 19, 2014
I finally updated my nexus after seeing it in my notification column. All seemed okay so let it get on with it.But when I thought it was ready I cannot get further than the four moving coloured circles. I have tried to factory reset and delete cache but has made no changes. I have been in contact with google play who now say there is no more actions that can be done so will need replacement.
View 1 Replies
View Related
Aug 9, 2010
with sprecovery on my phone. I'm trying to force 2.2 but cannot do it through sprecovery for some reason. RSDlite instructions say I must get to a bootloader screen. I cannot because when I hold power and x it goes into the sprecovery/nandroid back up with the Android guy with a ! on him.
View 2 Replies
View Related
Oct 1, 2010
I picked up my phone and it had a weird screen on it that looked like some that I saw when people have rooted their phones (from posts). It had options like "bootloader" and "power down" on it so I used the rocker bar to scroll and get out of it by powering down. My question is this: Someone I know was talking about spyware that can be put on laptops and computers and now this happened when they were around. Is this just a glitch or could it be indicative of spyware having been put on my phone?
View 4 Replies
View Related
Mar 22, 2010
I have tried multiple things, but I'm still stuck at the boot loading screen with the X.
I had cyan 5.0.4. - I wiped and flashed to 5.0.5 and now i cannot get past the boot.
I've tried booting back into recovery and wiping and doing a nandroid recovery to 'amon's recovery 1.7.0' but to no avail.
View 12 Replies
View Related
Nov 9, 2009
I thought i broke my phone but it just turned on and I have a screen that says the following Battery OK, OK to Program, Transfer Mode: USB
View 16 Replies
View Related
Jun 18, 2010
Just getting the hang of this Motorola droid. Was doing something funky so I powered it down and then back up. I have this dos looking screen that says...
Bootloader
2C.6C
Battery OK
OK to Program
Connect USB
Data Cable
View 1 Replies
View Related
Jul 20, 2010
My HTC Incredible is rooted and i was just wondering if i do clear storage from the bootloader screen, will this in anyway affect my root? Will Superuser get erased?
View 6 Replies
View Related
Jul 28, 2010
In a bit of panic here! I rooted my HTC Desire via unprovoked and installed ROM Manager (bought a license) and downloaded Opendesire from within this application. The ROM downloaded I did a backup and the phone is now in a continuous loop with the "android" logo shimmering across the screen.
I cant seem to get into recovery at all and the only way to power the phone off it to remove the battery! Has anyone got any ideas for me, I have been to the toilet 3 times in 30mins so far
View 7 Replies
View Related
May 26, 2012
i have a bricked lg optimus v for virgin mobile. My friend gave me this phone i did not know he used Rodimusrom http:[url].....html to modify it so i did a factory reset and that is what bricked my phone. i know how to go in recovery mode by holding the volume up button and the home button but other than that i do not know what to do.
View 3 Replies
View Related
Mar 21, 2012
I uploaded a custom rom on my xperia x10, for that i unlockd the bootloader and stuff..
Now, my phone is switched off since 15 days, when ever i try to switch it on, it vibrates once and nothing at all afterwards...if i press power button again, it won't vibrate, unless and untill i remove the battery and reinsert it in phone..
i see three red flashes of light, when connected to PC..
1. PC Companion for update, repair and custom repair is not working...most of the time phone is not detected..
2. SE-update service is also not working and phone is shown as Xperia arc..
3. Flashtool, doesn't recognize the handset
4. few, technician told me box flash would work, but again, it didn't work out
Now, i don't know much about this, but i do understand that hardware seems to be good, till now, the only issue is software and that to initial boot process i.e. bootloader.
is there any other way i can upload a new custom rom on my xperia ??
View 4 Replies
View Related
Mar 9, 2012
I have a [Gen2] ZTE v9 Tab which had 2.2 as the stock OS which I managed to get upgraded to 2.3 using modcore everything was gr8. I pushed my luck little further and tried to install Android ICS in order to do that I did a TPT using image file and after doing that my tab is bricked.
It's not booting into the OS I tried to get into the FTM mode but that doesn't work now only thing that work's is the ADB I tried the recovery methods that can be done through ADB but it says "sh:/sbin/recovery xxxx" missing.
What I think is that the system partition was recreated and Is there any way that I can get the system files on to the tab using ADB or a way to copy entire directory on to the tab using the ADB.
Got the system to boot to FTM but when I try to flash it the software fails and gives a error "Failed to Get aprmg x x x " some thing like that if there's a way to skip this I'll be able to get my tab back to working condition.
View 3 Replies
View Related
May 19, 2012
I got an HTC Explorer around a month ago and quickly found out how useless it was with the miniscule amount internal storage HTC decided to provide me with. So I quickly found jaggyjags' rooting tutorial found here: http:[url]....
All went well and I was happy with the phone, until some of the apps started bloating and I went a little too far with link2sd and tried to convert the com.htc app into a user app, which ended disastrously. Pretty much every process failed or had an error, so I tried restarting the phone and found myself in a boot-loop.
I then succesfully got into HBOOT and then into recovery. So I decided to try installing jaggyjags' custom ROM. After taking out my SD card to connect to my computer and copy jaggyjags' rom to, I got back into HBOOT, but could not get into recovery anymore. All the phone did was get stuck on the HTC screen.
After leaving it on the screen to see if it would eventually make it to recovery, I discovered that the phone is now dead and won't even charge. I'm not sure if it's because the battery might be dead or some other reason.
View 7 Replies
View Related
Oct 13, 2012
Ok i recently rooted my LG C800 or Mytouch Q using SuperOneClick which went well. However, When i tried to install a new rom using ROM Manager of the play store i first backed up my current rom and when it reboots its stuck on the boot LG logo. I have tried going into recover mode and it will show the android unboxing but a few seconds later it goes back to the LG logo. I don't want to say its completly bricked as i do get the LG logo.
View 4 Replies
View Related
Nov 1, 2013
I have a clone I9500. It has been bricked while I was trying to install a new rom
how shall I fix it. it has a MT6572 but recognizes as a MT65XX
some softwares says its a MT6589 AND SOME says MT6572
when I start up I keeps rebooting or gets stuck on the screen and I can acces the Boot manager
this is how is the boot manager:
Recovery
Fastboot
Normal.
it says alps.
View 1 Replies
View Related
Jan 5, 2014
Today i tried rooting my tablet using this URL>...I did everything from the instructions and first time didn't work. I tried 2nd time and it didn't work. Then I downloaded the RV27RC03_WW_GEN1 system.img, copied it in the "system_image" folder. I started rooting it for the 3rd time (because I was a fu*ktard) and when it finished it was bricked. I tried turning it on, but it wouldnt turn on, then i inserted a needle in the reset hole. It turned on, but it froze on the acer logo. When I got in the system recovery I made a factory reset.
View 1 Replies
View Related
Feb 22, 2013
Well I tried to create my own ROM. when the tablet boots, the back light comes on and that is all I get. When I press the on/off button the back light goes on and off. Another thing I noticed is that when I connect to the PC I can see the SD card and the External SD card mounted as MTS Device.
When I reset the tablet via the little hole on the top (next to the sound buttons) it just seems to switch off and then on again. I tried to switch the device off and try resetting (holding ON button + Volume UP + Volume DOWN) to get to CWM but I can't get into CWM. The back light just comes on.
I also tried to see if I could access the device via the ADB shell, but there is no device found. Which is weird as why does Windows see the device. I am not sure how to proceed. I also noticed that Windows (In device manager) sees the device as a Ramos W30HD and has an exclamation mark next to it?
View 2 Replies
View Related
Mar 18, 2013
I have a problem with my Alldro speed i tablet that runs the original ics 4.0.4.it is a Chinese tablet. I think it is bricked because it won`t start. I see only the little android robo and thats all; no restart no nothing. i tried to format the soft and reinstall it but no succes.I tried resetting with the dedicated button but still no succes. the install was a success but the tablet isn`t working.
View 5 Replies
View Related
Nov 27, 2012
i flashed my Ace and it was working fine until i pressed that goddamn Factory reset button....Got it bricked, it has gotten inta a boot loop. I know this is'nt new but in this case i had'nt even enable USB debugging in my phone.
View 3 Replies
View Related
