I was using my ramos w17pro and it was good.
When i tried to update it to 4.1.1 it shut down and never started again..
It's screen does not light up but i can feel the processor heating.
View 5 Replies
Well I tried to create my own ROM. when the tablet boots, the back light comes on and that is all I get. When I press the on/off button the back light goes on and off. Another thing I noticed is that when I connect to the PC I can see the SD card and the External SD card mounted as MTS Device.
When I reset the tablet via the little hole on the top (next to the sound buttons) it just seems to switch off and then on again. I tried to switch the device off and try resetting (holding ON button + Volume UP + Volume DOWN) to get to CWM but I can't get into CWM. The back light just comes on.
I also tried to see if I could access the device via the ADB shell, but there is no device found. Which is weird as why does Windows see the device. I am not sure how to proceed. I also noticed that Windows (In device manager) sees the device as a Ramos W30HD and has an exclamation mark next to it?
So I made the mistake of attempting to root my new HTC one V without knowing what I was doing. I currently can't get past the bootloader screen. I've attempted installing the RUU for my phone with no success. I've resorted to extracting the rom.zip from the RUU, renaming it PK76IMG.zip (required for hboot to recognize it) and putting it on my sd card. Everything works fine up until the end when it says "hboot version is older! Update failed"
View 2 Replies View RelatedRecently I have rooted my android tablet and I was exploring what I could do. One guy was telling me about an app that can work with performance in game(ChainFire 3D). He said it lowers the pixels in the game to run better. I tapped the install button and it said rebooting now. It then started to reboot but then proceeded to get stuck at the boot screen. I tried doing a hard reset but it is still stuck. I have also tried flashing the stock rom, but I get installation aborted when I try and install it.
View 4 Replies View RelatedSo I was trying out the CM7 for xperia arc by the freexperia team. It was epic. so i also tried the CM9 release by them..
-> I downloaded the CM9 anzu for my arc S
-> Extracted the files
-> Used fastboot to flash boot.img
-> And then: fastboot reboot
Instead of the FreeXperia splash screen welcoming me.. i was given a black screen.. The phone does turn on.. but then there is nothing. No splash screens. nothing.
Is there anyway to boot straight into CWM?? recovery?? Did i brick my phone for good?
I have just bricked my tablet by puting another recovery.img.. and now the tablet only shows boot screen. How can i connect it to pc to usb adb to restore it...or another method?
tabletrestigio 5197D ultra
I have a Motorola XOOM WIFI US version (don't remember exactly the Android version, but it's 3 point something). It was rooted and unlocked, but I decided to relock it, so I followed a tutorial to do it.
Everything worked fine and, despite the long process and the several steps, I didn't have any problems at all, but when I finished flashing the images from the usb, the tablet automatically rebooted and now it's stuck at the boot screen, with the Motorola logo.
I have read some topics with the same issue and I always see the same solution: go into the recovery mode, but the problem is that I can't even access the recovery mode. When I push the vol + button to select the "recovery" option, I just got a message "Reading ODM fuse: 1", and there's nothing else I can do. I can't even shut the tablet down.
I have an Allwinner A10 clone (Kurio 7), it is designed for kids but otherwise a standard android tablet. After hours of googling I rooted and installed CWM & Gapps (not included in the stock ROM). So far so good. The stock ROM was causing issues with some apps, it needed to go.
I flashed CM10 and it worked but no touch screen. It needed a compatibility flash to make it work. You can guess what's coming. I picked the wrong one and now the device does the following:
Reboot loop
Black screen (backlight though)
PWR+Vol up no longer gets to recovery
Vibrates constantly between reboots (due to wrong patch I'm guessing)
ADB picks up the device for a split second between reboots but "adb reboot recovery" does nothing. Even when using wait command. Tried "fastboot flash recovery cwm.img" after wait command, no luck. Is there anything else I can try?
I've only had it for a week, so how do I exchange it?, or what do I do?
In case you wonder how I know, the screen goes to blackness after the galaxy S screen
I had a accident with my phone i punched my phone screen out of anger but now the buttons only light up and the screen stays black what do i do?
View 2 Replies View RelatedI finally updated my nexus after seeing it in my notification column. All seemed okay so let it get on with it.But when I thought it was ready I cannot get further than the four moving coloured circles. I have tried to factory reset and delete cache but has made no changes. I have been in contact with google play who now say there is no more actions that can be done so will need replacement.
View 1 Replies View RelatedI have a light bleeding through my screen....is this bad? It past the 30 days since I bought the phone, so I'm not sure if sprint.
View 22 Replies View RelatedSorry Mods but searched and could not find any answer so:- Whilst "sat" waiting for my NON 3G/NON Wifi screens to load when trying to "surf the internet" I find that my screen light goes out! Is there a way or an app that keeps my screen light on for as long as I want it to?
View 4 Replies View Relatedon my old Samsung phone I had the backlight set to turn off after 30 seconds but this didn't lock the screen. With the Wildfire however with the backlight set to turn off after 30 seconds this also locks the screen. Is there a way to set it so the light goes off without locking the screen?
View 2 Replies View RelatedI'm using the new US version of HTC Hero (I believe it's running 1.5) and I noticed the following pretty annoying problem that I cannot seem to tweak.
If a new calendar event or alarm come in, the screen briefly lights up to show what the message is, and then turns off after a short while. That way, I don't have to turn it on, pull down the protective screen, then the notification bar, etc.
However, with email, SMS, gtalk, and the like, the screen doesn't light up. There are settings for having a sound or vibrate, neither of which light up the screen. When I press the Menu or power button, the new notification sits happily in both the lower part of the screen and the notification area.
Yesterday I noticed a small white circle on the screen. It looks like an area on the screen the might be displaying brighter.
View 44 Replies View Relatedhow do i get the screen on my epic to light up when i receive a new notification?
View 2 Replies View RelatedI am pretty sure when I got my first few texts with handcent the screen lit up, but now it stays black when receiving a text. Is that how it is supposed to be?
View 5 Replies View RelatedPretty much what the title says. Is there any app out there that lights up the screen when you receive a sms /txt message?
View 9 Replies View RelatedHTC now has an in store fix for the flying screen syndrome but you can do this at home. Take a credit card or similar type of item and wedge it in between the screen and the phones frame lifting the screen bottom as much as you can without causing further lifting damage. Then remove the battery door and locate the two holes in the photo with the tooth picks. Put a couple drops of crazy glue in each hole then remove the credit cards and quickly clamp the screen down for about a half hour. Clothes pins might work as make shift clamps try therm before starting. If you can get your screen up enough to put the crazy glue tip directly under the screen you can do this also but use very little glue and dot it maybe 4 times across the area for a good even hold then clamp. I would tape off the screen and phone frame just in case some leaks out by accident doing this method. Once the screen is secure use automotive black silicone adhesive sealant I like Permatex brand found at WalMart (now this stuff can also be used to glue the screen down but will take longer to dry 12 hours put it on a tooth pick and shove it under the lifted screen bottom then clamp) You can take this black silicone and dab a small amount around the screen crack and with your finger or a q tip force it in the light leak crack then simply take a tissue and wipe off any excess silicone before it sets you will have no damage to the phone from spilling it just wipe it off. You should now just have a tiny bit shoved in the crack with all the rest wiped off. let it set and you are done!
View 8 Replies View RelatedI finally decided to do it. I had an idea to use the corner of a sheet of paper dabbed in krazy glue to slide up and down the sides and bottom of my phone while holding the screen down for a while. Surprised, it worked like a champ, and any excess glue that got anywhere on the phone was easily removed with acetone. Unless you have very sturdy hands, I would not advise this.
View 5 Replies View RelatedIs it possible to get the droid screen to light up when you receive a text when it is on silent mode for example to show that you have gotten a text?
View 7 Replies View RelatedHas anybody else ever been in an SMS (Google Voice), email, or IM conversation with somebody, with your phone continually beeping every 30 seconds when you get a new message? This happens to me a lot. The phone is sitting next to me on my desk, and each time it beeps, I pick it up, push the power button, swipe to unlock, swipe down the notifications bar, and then look to see what's new. After doing this about 30 times in an hour, I have to ask myself, is this really necessary on a modern smartphone? The dumbest dumbphone I know will light up when you get a new text. Now, I have searched high and low, and am I just stupid, or is there no setting or app available to turn the screen on for like 5 seconds and display new notifications as soon as they come in?
View 5 Replies View RelatedIn a bit of panic here! I rooted my HTC Desire via unprovoked and installed ROM Manager (bought a license) and downloaded Opendesire from within this application. The ROM downloaded I did a backup and the phone is now in a continuous loop with the "android" logo shimmering across the screen.
I cant seem to get into recovery at all and the only way to power the phone off it to remove the battery! Has anyone got any ideas for me, I have been to the toilet 3 times in 30mins so far
These packages are alternative gapps. These Gapps should improve performance. On top of that all apps are up to date (like YouTube). Ultra Light version will also remove unnecessary preinstalled apps like yaam, DSP Audio Manager and so on (and some more gapps of course).
View 13 Replies View Relatedi have a bricked lg optimus v for virgin mobile. My friend gave me this phone i did not know he used Rodimusrom http:[url].....html to modify it so i did a factory reset and that is what bricked my phone. i know how to go in recovery mode by holding the volume up button and the home button but other than that i do not know what to do.
View 3 Replies View RelatedI uploaded a custom rom on my xperia x10, for that i unlockd the bootloader and stuff..
Now, my phone is switched off since 15 days, when ever i try to switch it on, it vibrates once and nothing at all afterwards...if i press power button again, it won't vibrate, unless and untill i remove the battery and reinsert it in phone..
i see three red flashes of light, when connected to PC..
1. PC Companion for update, repair and custom repair is not working...most of the time phone is not detected..
2. SE-update service is also not working and phone is shown as Xperia arc..
3. Flashtool, doesn't recognize the handset
4. few, technician told me box flash would work, but again, it didn't work out
Now, i don't know much about this, but i do understand that hardware seems to be good, till now, the only issue is software and that to initial boot process i.e. bootloader.
is there any other way i can upload a new custom rom on my xperia ??
I have a [Gen2] ZTE v9 Tab which had 2.2 as the stock OS which I managed to get upgraded to 2.3 using modcore everything was gr8. I pushed my luck little further and tried to install Android ICS in order to do that I did a TPT using image file and after doing that my tab is bricked.
It's not booting into the OS I tried to get into the FTM mode but that doesn't work now only thing that work's is the ADB I tried the recovery methods that can be done through ADB but it says "sh:/sbin/recovery xxxx" missing.
What I think is that the system partition was recreated and Is there any way that I can get the system files on to the tab using ADB or a way to copy entire directory on to the tab using the ADB.
Got the system to boot to FTM but when I try to flash it the software fails and gives a error "Failed to Get aprmg x x x " some thing like that if there's a way to skip this I'll be able to get my tab back to working condition.
I got an HTC Explorer around a month ago and quickly found out how useless it was with the miniscule amount internal storage HTC decided to provide me with. So I quickly found jaggyjags' rooting tutorial found here: http:[url]....
All went well and I was happy with the phone, until some of the apps started bloating and I went a little too far with link2sd and tried to convert the com.htc app into a user app, which ended disastrously. Pretty much every process failed or had an error, so I tried restarting the phone and found myself in a boot-loop.
I then succesfully got into HBOOT and then into recovery. So I decided to try installing jaggyjags' custom ROM. After taking out my SD card to connect to my computer and copy jaggyjags' rom to, I got back into HBOOT, but could not get into recovery anymore. All the phone did was get stuck on the HTC screen.
After leaving it on the screen to see if it would eventually make it to recovery, I discovered that the phone is now dead and won't even charge. I'm not sure if it's because the battery might be dead or some other reason.
my boyfriend and i have identical droids...on the text messaging screen, where it shows the names of the people you have sent texts to, there is a green dot or a red clock beside the person's name on his but not on mine...it seems to be some sort of tracking because when i my phone is in use his phone shows a green dot beside my name, and when my phone is idle his phone shows a red clock beside my name...
View 5 Replies View Related