General :: Tablet Bricked - Stuck At Boot Screen
Jan 21, 2014
Recently I have rooted my android tablet and I was exploring what I could do. One guy was telling me about an app that can work with performance in game(ChainFire 3D). He said it lowers the pixels in the game to run better. I tapped the install button and it said rebooting now. It then started to reboot but then proceeded to get stuck at the boot screen. I tried doing a hard reset but it is still stuck. I have also tried flashing the stock rom, but I get installation aborted when I try and install it.
View 4 Replies
Nov 29, 2012
I have just bricked my tablet by puting another recovery.img.. and now the tablet only shows boot screen. How can i connect it to pc to usb adb to restore it...or another method?
tabletrestigio 5197D ultra
View 1 Replies
View Related
Apr 27, 2012
So I was trying out the CM7 for xperia arc by the freexperia team. It was epic. so i also tried the CM9 release by them..
-> I downloaded the CM9 anzu for my arc S
-> Extracted the files
-> Used fastboot to flash boot.img
-> And then: fastboot reboot
Instead of the FreeXperia splash screen welcoming me.. i was given a black screen.. The phone does turn on.. but then there is nothing. No splash screens. nothing.
Is there anyway to boot straight into CWM?? recovery?? Did i brick my phone for good?
View 2 Replies
View Related
Apr 20, 2014
I received a generic Chinese table. it worked well for about two-and-a-half months. Then, just recently, I discovered rooting and the wonderful things it allowed you to do. I decided to download a system-tweak app, which included a CPU control. I was a little wary of overclocking my CPU, having heard it may decrease its life expectancy, but finally I thought "What the heck?" and in a brilliant stroke of genius cranked my 1Ghz processor up to 1.5Ghz, and it promptly froze, forcing me to power it down. When I turned it back on, I discovered that it had been factory reset. I re-installed my apps, including the system-tweak app, and decided not to touch the CPU controls for a while. Soon after, while at my sister's talent show, I discovered I had about 30% battery life, and I was still supposed to record her. So I figured I'd underclock it to save the battery.
Unfortunately, as my finger touched the slider, my brother bumped my arm and caused me to lower the CPU frequency to its lowest setting. It became extremely sluggish, almost to the point of being unresponsive, and finally I had to shut it down. When I restarted it, it started to boot but then got stuck on the shimmering Android logo, and now that's all it does. I can't even boot into recovery mode, and unfortunately I had just turned off USB debugging that same day.
View 3 Replies
View Related
Feb 3, 2014
i just bought a tuvva powerplay tablet..aka the game mid....it contains a rockchip 3066 cpu and 4 core gpu 400 ok iv been trying to flash custom roms on this for awhile..i never could..i got it rooted though..well then i heard of this thing called chainfire 3d thats supposed to improve fps...well i installed that tablet turned off...then it booted up with the logo..thats it..nothing more..i can enter the stock recovry..and my computers makes a bumpuda sound like its conntect..all i want to do is delete the dang chainfire thing..but i dont know how..iv tried using adp..
View 9 Replies
View Related
Dec 24, 2013
I have a Double Power EM63 tablet from Walmart. I believe it is identical to the Ematic EM63 and the MID-AM789 (Google "AM789" for specs since I apparently can't post links yet). I rooted it using Shaume (It's not in english, I just clicked the button that said "root"). I was trying to improve the tablets gaming performance, so I installed the Chainfire 3D driver, and now my tablet won't boot. It gets stuck on the "DOPO" logo, never gets to the boot animation. I can enter recovery mode, so I tried the "wipe/reset" option, but it didn't work. I think I need the stock ROM or a compatible custom ROM to flash to the tablet so it can run again, but I can't find any ROMs that would work and don't really know how to flash it.
View 8 Replies
View Related
Sep 12, 2013
I have an android tablet the is stuck at the boot logo. I've successfully gotten into recovery. But it had no menu...[URL]
USB debugging is not on. I have no clues as to the model of the tablet, as it isn't said anywhere on the device.. [URL]
View 1 Replies
View Related
Jul 7, 2012
I have a Motorola XOOM WIFI US version (don't remember exactly the Android version, but it's 3 point something). It was rooted and unlocked, but I decided to relock it, so I followed a tutorial to do it.
Everything worked fine and, despite the long process and the several steps, I didn't have any problems at all, but when I finished flashing the images from the usb, the tablet automatically rebooted and now it's stuck at the boot screen, with the Motorola logo.
I have read some topics with the same issue and I always see the same solution: go into the recovery mode, but the problem is that I can't even access the recovery mode. When I push the vol + button to select the "recovery" option, I just got a message "Reading ODM fuse: 1", and there's nothing else I can do. I can't even shut the tablet down.
View 1 Replies
View Related
Feb 19, 2013
Is there any kind of clockworkmod for this? Or ideas of another way to get it to boot up? Ifi am lucky enough to get to the stock recovery, it freezes up.
View 1 Replies
View Related
Feb 3, 2013
My Galaxy gio is rooted and is with a clockworkmod recovery. Yesterday, I tried to flash a custom kernel. After flashing successfully (through cwm recovery), i reboot my phone and then it stuck at boot screen.I did many searches but cannot understand any.I can go into recovery and download mode which is i think so required by odin.I wonder if I can flash any stock rom again easily. Need zip file with which i can put in sd card and install zip through cwm recovery by which i can unbrick my phone. I tried wipe data and factory reset but nothing worked.
View 4 Replies
View Related
Oct 23, 2013
I restarted my phone because it was freezing and it turned on on the boot screen where it gives me options to Recover, Reboot, etc. The volume button broke a long time ago. It sometimes works to move the option but pushing the power button doesn't do anything. Is there anything I can do to restart my phone avoiding this screen? It goes there every time. Could one of the volume buttons be stuck?
View 1 Replies
View Related
Nov 2, 2012
! i was trying to install a new custom ROM ( C.A.M.P ) i had Cyanogenmod 10... i came to where i flash the new rom on my computer then when i wanted to fastboot reboot to install zip on phone, my computer shuts off, now when i turn my phone on it lights up black and stays like this and i cant do anything(no CWM no nothing) so i remove battery to turn off....
Phone:Xperia Arc S LTI8i
View 4 Replies
View Related
Oct 4, 2013
My device is rooted, i was installing an app that tweaks performance which needed drivers to be downloaded / installed. As soon as i clicked that driver download / install button the device immediatly shut down. Now i'm stuck on its boot logo (Its a Chinese tablet powered by a RK3066 Chip / android 4.1.1) I tried (Holding power + volume down) = Dead android logo with red exc. mark on top / (Holding power + volume up) = Nothing / (Holding power + both volume up and down) = Dead android logo with red exc. mark on top / (Leaving dead android logo for a couple of minutes) = resets and logo is still stuck.
I have no custom anything . I did not do anything with the root except download apps.
I also do not have linux.
When the tablet is plugged into the PC when the dead android is displaying , it detects, but that is it, i cannot browse it what so ever.
All recovery methods in the tablet are (dead android logo)
View 2 Replies
View Related
Dec 31, 2012
Well rooted the i10 tonight fine went to install the play store and got force close on alot of stuff hit the reset button as the tablet forze and it boots but wont go past the impression screen then huts of
View 1 Replies
View Related
Dec 3, 2011
I have an android tablet (I'm not really sure what brand it is, but on the back it says m706b) that does not boot anymore.... it just sits at the "loading..." screen. Can I factory reset the device somehow?
View 6 Replies
View Related
May 31, 2012
I just installed the Android Revolution ROM for my phone, and I am now unable to get past the boot screen. I've been sitting here waiting for it to boot for 1/2 hour, before I took the battery out and tried booting again. Waited 1/2 hour again. Still no progress.
I had just made my phone S-OFF with SuperCID, and had flashed a new radio.img to my phone as recommended in the thread. After doing that, I went and used SuperWipe, and then I installed Android Revolution. Installation encountered no errors, so i was surprised when I was unable to boot.
I can still access 4ext recovery luckily.
EDIT: Wanted to point out that I was able to boot into my old rom after S-OFF, SuperCID and radio.img, but not after installing revolution rom.
View 2 Replies
View Related
Mar 5, 2013
Today my Huawei Ascend P1 got stuck on boot screen by itself, left it on the table and when I picked it up there was only a black screen with Huawei logo, and nothing else. I tried to turn it off - didn't work, tried pressing down button and power button, tried connecting it to the computer, but nothing seems to work, it's just stuck there and I didn't even do anything.
View 4 Replies
View Related
Apr 8, 2014
OK, one day I was able to open a Genymotion device, but later that day I wasn't. Reason?
When I opened a terminal (using CrunchBang Waldorf) and ran Genymotion, it would work fine, but then when I booted a Samsung Galaxy S4 4.3 , it would bring up the device fine, but it would get stuck on that "Android" screen, with the light going across.
I waited for a few hours, only to come back to the same message. I would open up the .Genymobile/genymotion-player.log using cat in terminal. The results?
[Genymotion Player] [Debug] Output command: "0%...10%...20%...30%...40%...50%...60%...70%...80 %...90%...100%"
So I tried running it through VirtualBox, giving me "untracked pid exited ____" with a number 100+ in the ____.
Other devices work fine, including SGS4 4.2.2, but SGS4 4.3 doesn't work.
View 9 Replies
View Related
Feb 3, 2013
I have an unlocked HTC Sensation and when i updated it when it was rebooting it got stuck at the htc screen for ages soo i took the battery out and now it gets stuck at the boot screen with the htc on it I Really am unclear
View 1 Replies
View Related
Jun 16, 2013
I was installing some custom ROMs on my brothers OT-955. Everything worked fine, I got CWM on there and installed a ROM called PAC [URL] ......
It worked pretty well, but the phone froze a couple of times a day so I decided to try some others yesterday. When I installed a CM-based ROM, I got a 'status 7' error in CWM and after I rebooted the phone was stuck in a boot loop.
After a while, it showed up when I ran `fastboot devices` and I was able to get it into recovery and install a different ROM. When that ROM had some trouble I ran into the same 'status 7' error with another one.
I miss-clicked and rebooted instead of installing a working ROM. Once again, I was able to reboot to recovery using fastboot and everything worked out.
Fast forward 30 minutes, the last ROM had some trouble too and I decided to move back to stock. CWM reported that stock was installed successfully so I rebooted.
Since then, the phone won't move past the boot screen. Fastboot doesn't recognize it, `adb` used to recognize it as offline until I replugged it.
I already:Reinstalled the device driver
Cycled the power (empty, full)
Tried a different host machine
What to try next.
View 9 Replies
View Related
Apr 18, 2014
I just replaced my LCD and digitizer on my Nexus 4 after i dropped it and the screen cracked. It was still in working condition after the damage, but the touch screen was unresponsive. The installation went pretty smoothly but when I went to boot it up after it gets stuck at the bootup screen with the 4 bubbles. I tried some of the solutions people found for a similar problem a few months back when Google released Kit Kat 4.4 for the Nexus 4 but none of them have worked for me. There doesn't seem to be any hardware functionality issues, just some software glitch that I can't figure out.
View 4 Replies
View Related
Dec 25, 2012
My micromax funbook talk p350 has been stucked in its logo. It doesn't carry on forward.
View 1 Replies
View Related
Dec 21, 2013
I flashed my intex aqua flash using a rom on [url]... and my phone now stucks at boot screen......
View 1 Replies
View Related
Apr 6, 2014
All I did was turn it off then screwing around I held the power button and vol+ and hit screen rotate lock switch as it was booting, then it read:
erasing userdata
unrecoverable bootloader error
And thats it. unfortunately adb is not turned on and now the tab will not boot past the secondary booting screen that reads Iconiatab, what is worse since I still have the stock recovery I cant flash anything that I have found. I have tried to flash the Stock A200 rom that is supposed to be stock recovery flashable but it only gets about 1/4th of the progress line before the dead android with the triangle !! sign appears. and of course I dont have the cpuid or sbk, so I cant flash anything in APX mode either....
Any way this is the name of the rom that wont finish installing in the stock recovery flash :
(Stock Rom)Acer_A200_AV032.RV09RC08_AV041.RV04RC02_PA_CUS 1_1330081316944_80bf3f7e_decrypted.zip
But any way the download is at 4shared, and I got the link from the Acer Tablet Forums)It is Titled Original Stock Rom, and it should have been able to have been flashed through the stock recovery, but di not, and I dont know if it is the rom, or the tablet that is the cause of it not flashing through the stock recovery....
And I have tried a few other update.zips to no avail, but that was the only full rom I found, and certainly the only one with the bootloader blob in it.
View 1 Replies
View Related
May 29, 2013
I have a stock arc s. which is having official ICS update. I tried to turn on bluetooth and the fone froze and then it restarted. It shows the sony logo and then xperia logo and then again goes back to the sony logo. it is not rooted.
I have a pattern lock screen.
View 5 Replies
View Related
Mar 18, 2013
I have a problem with my Alldro speed i tablet that runs the original ics 4.0.4.it is a Chinese tablet. I think it is bricked because it won`t start. I see only the little android robo and thats all; no restart no nothing. i tried to format the soft and reinstall it but no succes.I tried resetting with the dedicated button but still no succes. the install was a success but the tablet isn`t working.
View 5 Replies
View Related
Feb 12, 2013
I have an HTC Explorer[Pico] and I installed Jaggyrom 4.At first I loved the jaggyrom but then I had problems like apps would not start for more than a 30 seconds after clicking.
I untapped the data option in mount2sd so it would be placed in the internal memory.After that I rebooted my phone. It's still stuck on the HTC splash screen for more than 5 minutes now.What should I do?
View 1 Replies
View Related
Apr 14, 2012
I attempted to install transparent cm7.2 status bar and phone bricked (fastboot). I fixed it and installed other phone model's cwm with windows cmd command (stupid, I know). After this I'm always stuck at lg screen. Can't get into recovery either. Lg update tool does not find the phone, neither does cmd.exe. I sometimes get the ''colored snow screen'' or whatever I should call it. But it doesnt change the fact that the phone can't be recognized by anything.I can't turn the phone in any mode, it always starts with the lg screen.
View 8 Replies
View Related
Mar 14, 2014
I have a Matricom .TAB Nero 7" tablet running Android 4.0.1 and I have accidentally bricked it. I tried changing the resolution in build.prop to 130 and the launcher and SystemUI repeatedly crash on boot. I can't open any apps and I can't get into recovery mode. When I use Vol Up + Power it goes to an Android guy on his back with a red triangle with a ! in the middle, but no options to go into recovery mode. Is there any way I can rescue my tablet with my computer or another tablet?
I forgot to mention that using Vol Up + Power on the red triangle screen does nothing at all. I have Android SDK installed on my computer, can I do anything with this? The firmware version is 1.5 and the model number is SoftwinerEvb. The build number is nuclear-evb-eng 4.0.1
View 4 Replies
View Related
Oct 17, 2012
I have bought a GADMEI E8HD Tablet from efox. Its a great Tablet, uses 0912 as Firmware and it runs fine!
And then, Firmware 1011 is coming out. OK, no Problem. Flashed it and then: DEAD.
Nothing. It stays Black, doesnt do anything, even on USB.
I know from [URL] .... and [URL] .....
View 7 Replies
View Related
