I have just bricked my tablet by puting another recovery.img.. and now the tablet only shows boot screen. How can i connect it to pc to usb adb to restore it...or another method?
tabletrestigio 5197D ultra
View 1 Replies
Recently I have rooted my android tablet and I was exploring what I could do. One guy was telling me about an app that can work with performance in game(ChainFire 3D). He said it lowers the pixels in the game to run better. I tapped the install button and it said rebooting now. It then started to reboot but then proceeded to get stuck at the boot screen. I tried doing a hard reset but it is still stuck. I have also tried flashing the stock rom, but I get installation aborted when I try and install it.
View 4 Replies View RelatedI have a Motorola XOOM WIFI US version (don't remember exactly the Android version, but it's 3 point something). It was rooted and unlocked, but I decided to relock it, so I followed a tutorial to do it.
Everything worked fine and, despite the long process and the several steps, I didn't have any problems at all, but when I finished flashing the images from the usb, the tablet automatically rebooted and now it's stuck at the boot screen, with the Motorola logo.
I have read some topics with the same issue and I always see the same solution: go into the recovery mode, but the problem is that I can't even access the recovery mode. When I push the vol + button to select the "recovery" option, I just got a message "Reading ODM fuse: 1", and there's nothing else I can do. I can't even shut the tablet down.
So I was trying out the CM7 for xperia arc by the freexperia team. It was epic. so i also tried the CM9 release by them..
-> I downloaded the CM9 anzu for my arc S
-> Extracted the files
-> Used fastboot to flash boot.img
-> And then: fastboot reboot
Instead of the FreeXperia splash screen welcoming me.. i was given a black screen.. The phone does turn on.. but then there is nothing. No splash screens. nothing.
Is there anyway to boot straight into CWM?? recovery?? Did i brick my phone for good?
I received a generic Chinese table. it worked well for about two-and-a-half months. Then, just recently, I discovered rooting and the wonderful things it allowed you to do. I decided to download a system-tweak app, which included a CPU control. I was a little wary of overclocking my CPU, having heard it may decrease its life expectancy, but finally I thought "What the heck?" and in a brilliant stroke of genius cranked my 1Ghz processor up to 1.5Ghz, and it promptly froze, forcing me to power it down. When I turned it back on, I discovered that it had been factory reset. I re-installed my apps, including the system-tweak app, and decided not to touch the CPU controls for a while. Soon after, while at my sister's talent show, I discovered I had about 30% battery life, and I was still supposed to record her. So I figured I'd underclock it to save the battery.
Unfortunately, as my finger touched the slider, my brother bumped my arm and caused me to lower the CPU frequency to its lowest setting. It became extremely sluggish, almost to the point of being unresponsive, and finally I had to shut it down. When I restarted it, it started to boot but then got stuck on the shimmering Android logo, and now that's all it does. I can't even boot into recovery mode, and unfortunately I had just turned off USB debugging that same day.
i just bought a tuvva powerplay tablet..aka the game mid....it contains a rockchip 3066 cpu and 4 core gpu 400 ok iv been trying to flash custom roms on this for awhile..i never could..i got it rooted though..well then i heard of this thing called chainfire 3d thats supposed to improve fps...well i installed that tablet turned off...then it booted up with the logo..thats it..nothing more..i can enter the stock recovry..and my computers makes a bumpuda sound like its conntect..all i want to do is delete the dang chainfire thing..but i dont know how..iv tried using adp..
View 9 Replies View RelatedI have an android tablet (I'm not really sure what brand it is, but on the back it says m706b) that does not boot anymore.... it just sits at the "loading..." screen. Can I factory reset the device somehow?
View 6 Replies View RelatedI have a problem with my Alldro speed i tablet that runs the original ics 4.0.4.it is a Chinese tablet. I think it is bricked because it won`t start. I see only the little android robo and thats all; no restart no nothing. i tried to format the soft and reinstall it but no succes.I tried resetting with the dedicated button but still no succes. the install was a success but the tablet isn`t working.
View 5 Replies View RelatedI have a Double Power EM63 tablet from Walmart. I believe it is identical to the Ematic EM63 and the MID-AM789 (Google "AM789" for specs since I apparently can't post links yet). I rooted it using Shaume (It's not in english, I just clicked the button that said "root"). I was trying to improve the tablets gaming performance, so I installed the Chainfire 3D driver, and now my tablet won't boot. It gets stuck on the "DOPO" logo, never gets to the boot animation. I can enter recovery mode, so I tried the "wipe/reset" option, but it didn't work. I think I need the stock ROM or a compatible custom ROM to flash to the tablet so it can run again, but I can't find any ROMs that would work and don't really know how to flash it.
View 8 Replies View RelatedI have a Matricom .TAB Nero 7" tablet running Android 4.0.1 and I have accidentally bricked it. I tried changing the resolution in build.prop to 130 and the launcher and SystemUI repeatedly crash on boot. I can't open any apps and I can't get into recovery mode. When I use Vol Up + Power it goes to an Android guy on his back with a red triangle with a ! in the middle, but no options to go into recovery mode. Is there any way I can rescue my tablet with my computer or another tablet?
I forgot to mention that using Vol Up + Power on the red triangle screen does nothing at all. I have Android SDK installed on my computer, can I do anything with this? The firmware version is 1.5 and the model number is SoftwinerEvb. The build number is nuclear-evb-eng 4.0.1
I have bought a GADMEI E8HD Tablet from efox. Its a great Tablet, uses 0912 as Firmware and it runs fine!
And then, Firmware 1011 is coming out. OK, no Problem. Flashed it and then: DEAD.
Nothing. It stays Black, doesnt do anything, even on USB.
I know from [URL] .... and [URL] .....
I've been scouring the internet for the last view months since initially attempted to root my admittedly out of date htc view. A friend gave it to me in exchange for an old comp I built. I attempted through revolutionary to root, went through HTC and unlocked my device, continued to try and root it but found no proper software that worked to do so. Even tried something called mulitool which was pretty cool, but didn't get the job done. After a time I gave up on rooting, and my tablet powered down and I found myself stuck at the recovery screen. None of the options for clear storage, factory reset, or anything else proved fruitful. I removed my sd and was able to boot up fine. This was months ago. Now I'm having a similar problem only now even without SD card it's in a boot cycle where it boots to recovery for 30 seconds or so and shuts down, then back to recovery and like this ad infintum.
my screen reads:
relocked
**security warning
express pvt ship s on rl
microp 0656
hdboot 1.14 0005
radio 1.05.01
eMMC-boot
i had a half bricked tablet. it was able to boot into recovery and i installed a rom and now it boots but the android sign is all screwed up and i cant get into CWM anymore.. am i done for?
View 4 Replies View Relatedi have this phone (alps e1901 v77 fwvga) aka xtouch x507 (mt6577)
i flashed the original firmware from the supplier but since then the phone didn't boot
it wont charge also, but it's being recognized by pc and i still can flash on it.and i tested the battery its charged, and also there is current drain (~50 mA)when power button is pressed
I have probably bricked my Huawei Vision by rewriting boot image.
However, I can connect* it to PC and it sees my phone as "Huawei Handset" (same with Windows and Linux). But Windows misses its drivers (non-bricked phone worked); Linux seems to work. No OS can connect to it using default (downloaded) ADB, nor Fastboot, nor SoftwareUpdateTool.
Its PCI ID is 12d1:c002.
How could I reflash it? I would prefer the ways without disassembling the phone.
How to boot the phone, so you can connect it to PC:
1. turn off my phone completely (vol up + power for 10 seconds - release power for a seconds and repeat it once again)
2. prepare USB cable, so you can connect it in few seconds
3. hold vol down + power and after ~1s, connect USB cable (still hold vol down)
4. when Huawei logo appears, release both buttons - your phone is connected now
I have a Samsung S4 - US Verizon - SCH-i545 Build VRUEMK2. It is currently on version 4.3. I've done some research on rooting my device recently but have not gone through with the procedure. In my research, I've read that once you root your device the boot menu will come up with an unlocked deadbolt symbol and a message that reads something about a Custom Rom.
What's tripping me out is that recently I started my phone and it shows the Custom with unlocked deadbolt on screen, but I have NOT rooted my device. What the heck is going on? Could my equipment be compromised? Are there known apps that would change the boot menu on the S4.... I'm at a loss here and whenever I google this I just find instructions for rooting...
I have never even heard of the make and no software comes with the device. It's a so called "Asteroid" tablet which will not get past the boot screen! it just gets stuck on the android logo with the dots going up and down the space ship. He said it worked for one day and then it broke. It does look very similar to the generic ones being sold on other websites and are just called "7 Inch Android 2.2OS Tablet with WiFi and Camera".
P.S:
android 2.2
Kernel:2.6.32
build:v1.5.1
I just got a Arnova 10D G3 and it doesn't boot. All I get is the "Arnova" logo on a black screen. I bought it on a refurbished condition, it was a pretty good deal so I am ready to do any risky procedure to make it work since I don't have much to lose.
I downloaded the latest firmware from the official website but I am unable to use it because I can't access the recovery mode.
How can I make it boot?
I am now able to access the recovery mode (power + vol up) but the tablet keeps rebooting after loading this mode. I don't even have a menu.
I've bought an Android Tablet a few months ago, there was an update recently, and my tablet stopped working, it doesn't pass the boot image. I don't know which model is my tablet (chinese tablet i guess). I've taken some pictures of the tablet.
View 2 Replies View RelatedI get the android laying down with red triangle appear when I try access the boot menu.Not sure which tablet I got but to know which tablet the device is:
when holding the volume up key and power button for a nano second before the lying down android with triangle i get a standing up android with a blue orb animating in it's body.
I've got a issue with my impression 9.7" tablet... It seems not to BOOT, I think I may have accidently left the file system READ only... I can gain shell access and see what's going on however I cannot get it to remount as read/write right before it turns off... Factory reset won't do anything either... Here's the logcat as much as I can get out of it...
View 6 Replies View RelatedI have an android tablet the is stuck at the boot logo. I've successfully gotten into recovery. But it had no menu...[URL]
USB debugging is not on. I have no clues as to the model of the tablet, as it isn't said anywhere on the device.. [URL]
I am currently trying to flash my new Sanei n10 tablet with CM10 and it is proving much more difficult than I first imagined.
My main problem seems to be that the device just does not want to boot in CWM. I have installed the latest version of CWM (found here) via the Terminal Emulator but it doesn't boot into CWM Recovery, but rather just boots normally. I have also tried using the hard keys to boot into it but all that does is boot me into the default android system recovery (3e) which is useless as it will only update from verified roms.
The device is rooted and I have ROM Manager installed. I have given Terminal Emulator superuser permissions... It just doesn't seem to want to boot into CWM Recovery. I have tried using both ROM Manager as well as NOVO7 Tools to boot into it but I get the same results (device just reboots normally)
I think that it might be something to do with the stock ICS 4.0.4 that came with the device.that is causing me so much hastle.
I've been trying to root my Nook Tablet to CM10 unsuccessfully. I found this [URL]..... which led me to believe that downgrading to the 1.4.0 update would be useful.
I followed the link from this, [URL] ..... and downloaded the .zip and put it on an mSD. I proceeded to place it in the tablet, turned it on, and the update went through and my screen went black. After a minute or so I hit the power on button, and nothing happened. Nothing works on it now. I've tried hitting the power button for 20+ seconds then the 2 seconds, as well as the power + N button. The screen remains black. I can connect the nook to my computer and the power cable lights up, as well as when it's placed on the wall.
The Nook Tablet (it's a BNTV250) isn't turning on.
As per the title, I have a client who wants this done to their generic chinese/yarvik tablet. It uses the Allwinner A10 cpu afaik. Due to my very limited experience in building kernels(where I believe the "option" to enable/disable this is)/roms + the lack of sources for the tablet(just getting into fastboot took a while).
View 1 Replies View RelatedI have a chinese Allwinner 7" tablet ( Rocky M713HD ) , I was trying install a CWM recovery image. I connected my tablet to PC, opened my terminal and taped:
adb push recovery.img /data/
adb shell "cat /data/recovery.img > /dev/block/nandg; sync"
adb shell "echo -n boot-recovery | busybox dd of=/dev/block/nandf count=1 conv=sync; sync; reboot"
After that, my tablet freezes on bootloader with no single info on adb when typing "adb devices"
As you can see, I missed a caracter on the 3rd line: ( nandg/nandf )
I was on Allwinner 4.2.2 ROM.
So I made the mistake of attempting to root my new HTC one V without knowing what I was doing. I currently can't get past the bootloader screen. I've attempted installing the RUU for my phone with no success. I've resorted to extracting the rom.zip from the RUU, renaming it PK76IMG.zip (required for hboot to recognize it) and putting it on my sd card. Everything works fine up until the end when it says "hboot version is older! Update failed"
View 2 Replies View RelatedI have a problem with my chinatablet.
It's a X-Touch tablet X714 as the back case says and DFP7006.... anyway i don't mind what the heck it is.. problem is:
It's been working satisfactory for half an year and yesterday i installed BusyBox Pro, dsploit and Flappy Birds.apk from unknown sources... so than battery died (it dies in 3hrs) and today when i charged it up it booted to factory erased mode (cold or hard boot i guess you call). I didn't mind it at all, started installing apps from SD but there was not enough space, actually not even a bit of storage. Now every time i boot my tablet it keeps erasing. Strangely enough i found mojang folder in the mnt/sdcard/ directory which i could access with built in file explorer.... So tablet didnt actually erased everything, but rather just denied my permission to use them and any free internal memory..
When I turn my tablet on, I get a battery symbol with a triangle around it and exclamation mark in middle.
View 7 Replies View RelatedI was using my ramos w17pro and it was good.
When i tried to update it to 4.1.1 it shut down and never started again..
It's screen does not light up but i can feel the processor heating.