General :: Install CWM From Command Comport In Android - Phone Bricked?
Feb 20, 2013
i tryed to install cwm from command comport in android so my phone bricked and when i start it black screen apperas so want to install cwm from zip.i can run only android system recovery(3e) so is any .backup file or .zip file to i use as apply update from sdcard or restore user data to install cwm than i can flash rom and new android version and hope it will works
i have tryed recovery-clockwork-5.0.2.6.zip it starts flashing and i got
Error: invaild OTA package
update.zip is not correct
Installation aborted
View 1 Replies
Oct 13, 2012
Ok i recently rooted my LG C800 or Mytouch Q using SuperOneClick which went well. However, When i tried to install a new rom using ROM Manager of the play store i first backed up my current rom and when it reboots its stuck on the boot LG logo. I have tried going into recover mode and it will show the android unboxing but a few seconds later it goes back to the LG logo. I don't want to say its completly bricked as i do get the LG logo.
View 4 Replies
View Related
May 11, 2014
I've got a moto g and its my first android and its rooted and bootrom is unlocked, and ive installed terminal emulator, but I cant find out how to install python so that it works in terminal eit su, cd , ls ... commands?!?
I've installed qpython app from playstore but you cant do commands like su, cd ..... I've tried ping in terminal emulator and it works so you can enter internet over terminal emulator, so i tried apt-get install python but it says no apt-get command founder something like this, so how to install python on android with working commands( su ...) so that it can enter filesystem directories like /sdcard....
View 2 Replies
View Related
Feb 15, 2012
How do install a *.apk from adb command line?
First I tried to cp the *.apk from /sdcard/backups/apps to /system/app (after rw mounting the file system of course)
I did successfully move it to /system/app but the *apk was not "installed"
then I rm it and tried:
install /sdcard/backups/appa/<package>.apk /system/app
and it copied the *apk to /system/app but still was not "installed"
I also tried:
install /system/app/<package>*apk but got the error dialog:
Code:
BusyBox v1.19.0.git.adrynalyne (2010-12-21 22:03:30 MST) multi-call binary.
Usage: install [-cdDsp] [-o USER] [-g GRP] [-m MODE] [SOURCE]... DEST
Copy files and set attributes
Options:
-cJust copy (default)
-dCreate directories
-DCreate leading target directories
-sStrip symbol table
-pPreserve date
-o USERSet ownership
-g GRPSet group ownership
-m MODESet permissions
My goal is to figure out how to use adb command line and also I want to install an app as if it were a pre-installed app. For example pre-installed apps don't show up as a removable app and stay installed after a factory reset.
View 9 Replies
View Related
Jul 28, 2010
In a bit of panic here! I rooted my HTC Desire via unprovoked and installed ROM Manager (bought a license) and downloaded Opendesire from within this application. The ROM downloaded I did a backup and the phone is now in a continuous loop with the "android" logo shimmering across the screen.
I cant seem to get into recovery at all and the only way to power the phone off it to remove the battery! Has anyone got any ideas for me, I have been to the toilet 3 times in 30mins so far
View 7 Replies
View Related
Dec 11, 2013
I would like to "deploy" .apk files to a set of tablets for student use in the school. Every now and then I will be required to install new apps across a range of devices. I have sorted out the transfer of the apk files to the tablets using an app called "FolderSync" so that the files will be local on the SD Card. Hopefully this part should not be problematic. Due to the fact that the tablets will be used by students, I want to make the process of installing the apps as automated as possible. Using the command "pm install <app.apk>" command I have achieved this step also. My trouble is that I will require the script to improvise and find all apk files in a folder and install them. So far I have tried the following:
Code:
su
cd /sdcard/FolderSync/
find *.apk -exec "pm install {}" ;
However this returns "find: pm install app.apk: No such file or directory" This may be more of a Linux issue than android, or maybe even just me missing something obvious, however I have tried adjusting the syntax here and there and can't figure out how to successfully install a directory of .apk files.
View 2 Replies
View Related
Nov 17, 2009
Anybody knows the install command to install an apk in system/app directory .
View 2 Replies
View Related
Feb 11, 2013
after a rom flashing, my phone got bricked
I have a i9300 mtk6575 phone, do you know how can I unbrick it? Right now it doesnt even charge when plugged to usb o charger, does not turn on , and doesnt react to any button pressing combination...
View 1 Replies
View Related
Mar 15, 2012
The display of my galaxy note is broken. Ihave a few important sms on it and need to save them before i send my device for repair. How can i do this if i can not see anything on the display? I am using an ics 4.0.3 leak on it.
View 3 Replies
View Related
Apr 25, 2013
I tried to use terminal emulator to install recovery menu to put a new firmware, but when the phone rebooted (samsung galaxy s3 replica mtk6575) all that i have is a black screen and the Android System Recovery <3e>. Before that, I tried sp flash tool, but the download bar never start to fill.
View 3 Replies
View Related
Dec 16, 2013
I've tried to flash a rom with sp flash tool, and my allview viper (AKA blu life play100, gionee elife e3, or else model) died. nothing appears on the display, even when i put to charging.
View 2 Replies
View Related
Mar 25, 2014
i have this phone (alps e1901 v77 fwvga) aka xtouch x507 (mt6577)
i flashed the original firmware from the supplier but since then the phone didn't boot
it wont charge also, but it's being recognized by pc and i still can flash on it.and i tested the battery its charged, and also there is current drain (~50 mA)when power button is pressed
View 4 Replies
View Related
Apr 15, 2014
So recently I got lack of internal memory(it is only 512MB though) and I tried to swap internal memory with microSD(marked as sdcard2). However, Im noob in this and after changing the lines I understood, that I changed sdcard with sdcard2(swapped sdcard and sdcard2), however, my android system seems to be not working now. I can boot and access settings, but thats all. No menu, no apps, no anything. Empty screen, only settings accessible. I cannot access any files or anything...
What I tried:
- Connecting phone to PC as I have Android Commander program which can browse system files from pc, unfortunately, failed to connect.
- Factory reset. Didnt work.
- Recovery mode - tried all options that are available, didnt work.
The phone is Prestigio Multiphone PAP4300 DUO. When I boot to the phone, I unlock it and I get many messages saying com.android.phone, system and such things stopped working. When pressing HOME button, it goes to home, but its empty(empty screen) and tells Launcher stopped working too. All I can do is access the settings. Cant call anyone though.
What to say to warranty service when I will bring the phone to them. Can they recognize that its rooted/that the vold.fstab file is modified?
Specs: [URL] ......
That looks to be white, but mine is black. I rooted it only. Havent done any changes to the phone until yesterday - swap the memories.
View 2 Replies
View Related
Jul 18, 2013
accidently well formatted the entire flash after my fone got bricked now the phone doesnt get run.i have gionee d1 dream , the phones gets detected in sp flash tool through usb but i have removed everything and i cant find a way to install a firmware again.
View 7 Replies
View Related
Mar 18, 2012
i tired updating my galaxy s2 i9100g with ics (wasnt aware that its not supported) with odin and it showd me fail and now i am unable to switch it on it just shows phon and yellow triangle and computer logo when i connect it ot pc odin recognizes but kies not can sum1?is it bricked ?
this what odin showd when i tried to update
<ID:0/015> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9100_SEB_I9100XXLPQ_I9100OXXLPD_I9100XXLPQ.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
[code]....
View 4 Replies
View Related
May 8, 2014
I'm trying to see my phone's internal memory (total and free) via ADB. I have a broken screen, so I can't access the phone directly. I searched a lot both here at XDA and on the web.
I need to check via ADB how much storage is available and free. I need this to check if the phone has been successfully erased before selling it.
View 4 Replies
View Related
Apr 3, 2009
So I just installed the a home update, it installs so i click on the home button, select to make a home my default home app and then I get a "force close" over and over. So i turn off my phone, turn it back on and now it wont go past the android screen(blinking android guy). WTF?! What are my options?
View 14 Replies
View Related
Sep 6, 2010
I have a rooted samsung captivate with sideloading enabled. After experimenting with different wifi tethering apps from the unofficial market, I began experiencing difficulties with my wifi connection. Even after uninstalling every app that I thought was changing the wifi state, the problem still persists. I can turn on the wifi and it will act normally for about 30 seconds before turning off without user intervention. In dmesg, the error is as follows: 'mmc1: Got command interrupt 0x00060001 even though no command operation was in progress.' Is this caused by an app or is this a more complicated problem?
View 15 Replies
View Related
Mar 18, 2013
I have a problem with my Alldro speed i tablet that runs the original ics 4.0.4.it is a Chinese tablet. I think it is bricked because it won`t start. I see only the little android robo and thats all; no restart no nothing. i tried to format the soft and reinstall it but no succes.I tried resetting with the dedicated button but still no succes. the install was a success but the tablet isn`t working.
View 5 Replies
View Related
Sep 10, 2010
I'm in Canada and my service provider is Rogers, however I bought the phone in Hong Kong. At first, I rooted my Galaxy S i9000 so I can remove the stock apps, but I couldn't seem to unroot it so I flashed the firmware. At first it said "failed" so I had to reboot it back into download mode to start the flashing again. I forgot to put on the back cover during the flash and the battery fell out. Now when I turn on my Galaxy S, it stays on the welcome screen where it says "Galaxy S GT-I9000 Samsung" and does not do anything. Is my phone bricked and what can I do to fix it?
View 1 Replies
View Related
Aug 13, 2010
After several attempts trying to apply Lag Fix, my phone ended up doing endless boot loops and due to my ROMs being on the SD Card instead of Internal SD, I could not flash it and seem to not have access to somehow get the ROM file from External to Internal SD. I then tried to restore the Stock ROM through Odin and it failed miserably, with several stalls that eventually led to the screen shown below. This screen stays on when I press the power button and nothing else seems to work. Removing SIM and SD Cards also did nothing.Phone is still under warranty and I have insurance, but not sure if I can claim warranty in its current state.
View 12 Replies
View Related
Aug 21, 2010
I'm new to all this and am wondering what the chances are of getting bricked if i (try to) root my Droid Incredible?
View 8 Replies
View Related
Jan 8, 2014
Yesterday my Blu Studio 5.0s has frozen and I've tried for a hard reset, till there, ok ! but after hard reset my phone died !
YES, the phone do not start up, do not light up, can't put on recovery mode, don't charge, it's totally bricked?
View 6 Replies
View Related
Mar 8, 2010
So if my phone becomes a paper weight after the OTA rolls out then Verizon did it on purpose right? You can't tell me they can't force the OTA to override the leaked version. I would think they would force all the phones to update to their version of the OS. Therefore, if my phone bricks after the OTA then they are just being jerks right?
View 23 Replies
View Related
Sep 13, 2010
Ok, my friend gave me his Droid and I'm trying to reboot it to its original OS. Its bricked and my computer isn't reading the phone when I hook it up. I'm going in circles trying to find out what can it be. I don't know what else to do. Should I give it back or can I fix this bricked phone?
View 35 Replies
View Related
Jul 21, 2013
My Android phone is bricked. It is an MT6515 phone; model i9270+ (Chinese dual SIM phone).I had trouble rooting it, so I was half way there following steps in THIS thread. T
I accidentally flashed my phone with the wrong boot image from fast boot ("fastboot flash boot boot.img"). I had a clockwork mod backup copy of my own boot.img, so I just wanted to reflash it. Fastboot said that the flash failed.
I tried again, and then in the middle of the process my command prompt stalled. Phone was in flashing process for about an hour, so I hit Ctrl+C to stop it... I wanted to do a recovery from the phone itself using clockwork recovery...
When I wanted to boot my phone there was no screen light. The phone just vibrates twice and that's all.
PC won't recognize it, so I can't go back to fastboot mode. Key combination (vol up + power) won't bring fastboot mode...This phone seems completely bricked...
View 2 Replies
View Related
Feb 2, 2012
I've got a Motorola Flipout, just yesterday night I was copying and moving files to /system/bin (having root).
Lik this:
Code:
cp /sdcard/binaries/iptables-save /system/bin
But then I have did something wrong, typed something like this instead.
Code:
cp /sdcard/binaries/rfkill/system/bin
That throws me an error (normal) but then everything was screewed up.
The files and folders have been dissapeared to `ls` command.
`ls /` shows / doesn't exist.
`ls` shows nothing.
when i enter to accounts it reboots, doesn't detect sdcard partition...I do a rollback with a partial backup from 30 days ago, and still appear nothing.
It's like the partition system have been screewed up.This can solved reflashin again with sbf_flash ?
View 1 Replies
View Related
Sep 27, 2010
Will AT&T replace bricked Captivates if they are outside of the 30 day zone?
View 4 Replies
View Related
Jun 5, 2010
I just recently try
View 2 Replies
View Related
Mar 14, 2014
I have a Matricom .TAB Nero 7" tablet running Android 4.0.1 and I have accidentally bricked it. I tried changing the resolution in build.prop to 130 and the launcher and SystemUI repeatedly crash on boot. I can't open any apps and I can't get into recovery mode. When I use Vol Up + Power it goes to an Android guy on his back with a red triangle with a ! in the middle, but no options to go into recovery mode. Is there any way I can rescue my tablet with my computer or another tablet?
I forgot to mention that using Vol Up + Power on the red triangle screen does nothing at all. I have Android SDK installed on my computer, can I do anything with this? The firmware version is 1.5 and the model number is SoftwinerEvb. The build number is nuclear-evb-eng 4.0.1
View 4 Replies
View Related