General :: WiFi Not Working - Huawei Vision / CM9
Nov 17, 2012My friend made cyanogenmod 9 for Huawei Vision. Its nice but WIFI is not working..

My friend made cyanogenmod 9 for Huawei Vision. Its nice but WIFI is not working..
I've tried different cables including its own cable. Yes, I've installed drivers. Yes, I tried enabling and disabling USB debugging. Yes, I tried cleaning the USB port, both on the computer and the device. Yes, I've connected the device to multiple computers. Yes, I've power cycled both the device and the computer.
No, it didn't work.
my huawei vision iv installed rom superjellybean 4.1 on my vision .. i got the tutorial from this thread : [URL].... i follow the instruction but when the first booting my handset going stuck on the booting animation i want to restore it to the stock rom that i already downloaded but my pc doesnt recognize my phone (i using SUT L3)
View 4 Replies View RelatedI have probably bricked my Huawei Vision by rewriting boot image.
However, I can connect* it to PC and it sees my phone as "Huawei Handset" (same with Windows and Linux). But Windows misses its drivers (non-bricked phone worked); Linux seems to work. No OS can connect to it using default (downloaded) ADB, nor Fastboot, nor SoftwareUpdateTool.
Its PCI ID is 12d1:c002.
How could I reflash it? I would prefer the ways without disassembling the phone.
How to boot the phone, so you can connect it to PC:
1. turn off my phone completely (vol up + power for 10 seconds - release power for a seconds and repeat it once again)
2. prepare USB cable, so you can connect it in few seconds
3. hold vol down + power and after ~1s, connect USB cable (still hold vol down)
4. when Huawei logo appears, release both buttons - your phone is connected now
I have installed Google Music, which I would like to use to sync/listen to music. My problem is that externally controlling playback (play/pause/skip) does not automatically control Google Music, but the stock Gingerbread Music player.
Of course, from within the Google Music app itself it works, but external control like from the CyanogenMod lock screen widget or from Bluetooth AVRCP commands it always starts playing on the stock player.
It actually works after I launch Google Music once manually. It seems to control the last used/active app automatically, which is good. But when there's nothing running, it defaults to the stock player.
Is there a way to change that? It's annoying especially with Bluetooth AVRCP and A2DP in the car..
I need to change my wifi mac adress on my huawei u8180 with ROM CyanogenMod 7.2.0-RC0 U8160.
I have try to change/modify nvram.txt but no good
Also try with softwares :
- com.jiaofamily.android.mac: change mac for huawei (it's old). it can read the mac but can't change it (unsuported device)
-Set MAC adress : cant read mac adress
both don't ask root right.
My Ideos slim 7 touchscreen is not working since a few days, and the usb debugging mode is OFF
I tried to re-install many firmwares ( the original one, MTN firmware etc), but the problem persists
is there a way to turn the usb debugging mode to ON from the computer so that I can use the fastboot ?
I recently bought a Huawei G700. It's a fairly new and uncommon device. It runs Android 4.2.1 in combination with Huawei's own Emotion UI
When I have WiFi enabled and for some reason my Wifi disconnects (for example I go out of reach), my phone keeps asking me, each and every time, if it's allowed to use Mobile Data. if I don't answer, my mobile data does not connect thus I can't recieve any mails etc which is highly annoying.
This is the exact error/popup message that I get:
Data connection change. WLAN is unavailable, try to connect to mobile network?
I've googled this exact phrase, but I get 0 results. How can I prevent my phone from asking if it's allowed to use mobile data?
I have been using a trusty U8120 for a while now with Fresh Zodiac Fruit Rom. I was browsing on it last night and then next day the screen was just inoperable. Sometimes it would "take" some input, but it would understand something different (e.g. on a keypad, touch it in the middle "5" and it understands top right "3", but then again, "3" doesn't register either).
Here's the funny thing: it doesn't take any input whatsoever, but, if the screen is about to idle shut down and I touch it, it goes back on full light, meaning it understands the touch.. what the..?
I tried reinstalling the firmware but nothing happened.
I have a huawei u8160 (Vodafone 858 Smart) running Psyke83's Cyanogenmod 7.2 14/8/2012.
I installed the separate USB host zip using clockwork mod recovery, However the usb host mode is not working nothing happens at all when I connect a usb OTG cable to a thumb drive.
nothing lights up , no notifications , the phone doesn't light up if locked.
What should I do?
will roms made for the huawei ascend 2, work on the huawei sonic, as the phones look identical, and the specs are pretty much the same?
View 1 Replies View Relatedi've bought u8850 vision and its a great phone .. it has 1 ghz scorpion and adreno 205 gbu .. how can i port cwm and cm9 to it ?! it has 2.3.7 firmware ?
View 1 Replies View RelatedIs there a setting, or an app, to turn the display red?
I do a lot of science-type stuff (astronomy), and also photograph at night. I used a red-tinted flashlight, so as to not ruin my night vision. I would love to be able to use my phone while shooting, or doing astronomy stuff out in the dark, and not have bright white glow from the phone.
After updating from stock 2.3.3 To Gen.Y Vision X ROM, callers faced some terrible echo when speaking with me. I updated Radio to one suggested and it was fixed. Soon after this update speaker in my phone failed. So I have 2 questions. Could that failure be caused by radio firmware? How should I choose radio software to flash?
After getting my phone fixed (not without troubles, because device is rooted, and I didn't clean it up properly) I didn't flashed new radio yet. I did flashed latest Gen'Y Vision X ROM. May I flash radio after ROM without any problems, or should I flash Radio and than ROM?
I have the following issue:
My old phone is a rooted htc vision (android 2.3). I want to transfer app data (savegames, settings, whatsapp verification, etc...) to my new phone which is an unrooted nexus 5.
I have titanium backups of my 2.3 apps but i can't use them on my nexus 5 as it is not rooted.
Is there a way to use the titanium backup files with helium (which works without root)?!
Or do i have any other opportunity to get the existing app data from the old phone to the new one without rooting the nexus?
This phone was caused by updating to jelli Bin,now phone is downgraded to 2.3.3.but phone have no wifi mac address....
View 1 Replies View RelatedI flashed my i9003 with the xxkph rom. Everything works fine except the wifi. When I want to turn it off, it will stay 'turning off'. I tried factory reset and wipe cache, and even reflash the rom, but none of them works! And whats more, I used to use the xxkpe rom and the issue also exists!
View 1 Replies View Relatedi have recently upgrade my ace 2 to CM11 mahdirom, previously i installed the CM11 maclaw release. when i turn on the wifi tethering, the icon showed up, but i cannot detect my SSID on my laptop and my tab.
View 4 Replies View RelatedMIUI rom. When I turn on wifi it says "is on ..." and "error". I've saved logcat file.Here is the logcat file:
HTML Code:
V/FileViewActivity( 855): computeScrollPosition: result pos: /mnt/sdcard stack count:0
I/MobclickAgent( 855): Could not get location from GPS or Cell-id, lack ACCESS_COARSE_LOCATION or ACCESS_COARSE_LOCATION permission?[code].....
my problem i flashed rom LT26i_DooMLoRD_leak_JB-197.zip but wifi not work on gsm mode when i unplug sim card from my xperia s wifi worked without any problem what i can do?? and this photo for my ver
View 1 Replies View RelatedI seem to have a weird problem on my HTC Sensation. I have been noticing that when the phone switches from Wifi to 'H', the mobile data stops working. I can see the signal bars so no problems with making calls, text etc. I have tried putting phone into airplane more, resetting mobile data and a couple of apps that reset the mobile data stack. None of that has worked. The only way I have made it work is by restarting the phone - quite frustrating. The mobile data then starts working. It has only happened when 'H' is displayed as the mobile data.
View 1 Replies View RelatedRecently I flashed my A500s mobile using the method mentioned in one of the threads here. I used mobile-uncle tools to root it. I've installed almost every ROM available here on XDA for A500s but I couldn't use my Wifi. It keeps on searching for Wifi network and/or hangs. (In some of the ROMS Camera was not installed)I'm struggling for past 3-4 days but no success. I downloaded the stock ROM too but it's not installing. It gets aborted.The CWM screen shows the headline as....
-rua1 autoCWM v5.5.0.4 for A500S_IPS
-CWM automade 12.02.2014 15:28:56
My set is normal A500s (no IPS), should I install another CWM..?
Recently i have noticed that pandora wont stream when its off a wifi connection...I have tried wiping cache and dalvik cache and also fixing permissions uninstalling and reinstalling but nothing seems to work????
View 2 Replies View Relatedsince i updated to 4.4 my phone is encountering some crazy problems. One of these is: my nexus 4 does not work with my wifi (any other device works fine). Play store, google+, gmail, maps, google now, nothing is working the only thing that i can do is navigate in the internet. I already tried to make a factory reset, adjust time and date, clean the cache but nothing solved my problem.
View 3 Replies View RelatedSince a few month my WiFi does not work properly. When I activate it, it automatically connects to the access point. But after 3 minutes, the connection stops working. The WiFi symbol in the status bar disappears and 3g starts working. When i disable and reenable wifi everything works fine again for 3 minutes. I already tried a static IP. Other devices (laptop) have no problems with the same network.
View 2 Replies View RelatedWifi is not working i Cant switch the Wifi on. I have a Note n7000 android 4.2.2 cyanogenmod 10.1 nightly.
Can't press the small wifi button on dock it will not recognize on the other hand i can press the Bluetooth without any problems and when i go to the settings the small _OFF_ button will not recognize me pressing it.
My data plan is eating me alive and I didn't know why until I finally noticed that when I am at a hot spot, my wifi never connects until my data plan is locked out.
I have a Note, not a Note II. I am on Rogers, not ATT.
I've tried adjusting everything I can think of, tried a hard reboot of my phone, and when I looked for support with android OS, I couldn't find this Wi-Fi disconnect policy they were talking about anywhere on my phone.
The other day as in October 1st both my iphone and my nexus 7 will not play videos on my home WIFI. on 3g my phone plays and my laptop on wifi perfectly fine.
View 24 Replies View RelatedSome apps like location tracking apps on my sons phone does not work all the time when his phones on 2g internet. But on wifi it seems to work all the time. Apps like life360 location tracking apps, remote control apps like androidlost, which uses push messages and also polling services works intermittently. Sometimes it works on 2g internet and sometimes it does not. But on wifi, there's no problem at all.
But strangely messaging apps like viber works continuously on 2g or wifi without any problems.
I have installed Creed's Rom 1.5 yesterday in my Galaxy Fit GT 5670 and I am not able to connect to the internet with WiFi.
View 2 Replies View Related