General :: Desire Z (Vision / G2) Echo During Calls And Updating Radio
Apr 2, 2013
After updating from stock 2.3.3 To Gen.Y Vision X ROM, callers faced some terrible echo when speaking with me. I updated Radio to one suggested and it was fixed. Soon after this update speaker in my phone failed. So I have 2 questions. Could that failure be caused by radio firmware? How should I choose radio software to flash?
After getting my phone fixed (not without troubles, because device is rooted, and I didn't clean it up properly) I didn't flashed new radio yet. I did flashed latest Gen'Y Vision X ROM. May I flash radio after ROM without any problems, or should I flash Radio and than ROM?
View 1 Replies
Sep 7, 2013
I have a problem with my Atrix HD running ProBam 4.3 rom. My phone is ok but everyone I call or call me will hear an echo of his own voice making it extremely hard to understand the conversation. I didn't had this problem before on my first flashed.
View 1 Replies
View Related
Apr 14, 2012
I have a Kyocera Echo which has decided to forever loop in the start up instead of doing anything and since I can't hold power and volume down to factory restart I thought it was dusted
but if i read this thread correctly, HTML Code:
[URL]
I might be able to do a hard rest through fastboot.
I have installed, all the drivers from the Kyocera website, I have the sdk, I know where to go into command prompt, etc. But my phone is not being detected by the fastboot tool. when I type Fastboot devices, I get nothing, not even the ? mark they mentioned and it just hangs on when I do fastboot -w saying it's waiting for the the device.
Even though its looping my computer will detect the phone and when I have placed it in what i think is download mood (power + plus both volume buttons) it has detected the right drivers to install and though it loops will kind of pop up the phone on my computer.
But when I put it it in what I guess is fastboot mode (power + volume up) Window's says it found new hardware, "Android," just plain android. I tried to direct to install the usb drivers from the Android-sdk/extras/ folder, but that doesn't work and Window is not finding anything automatically.
I assume the problem is that I need to find the right driver for the "Android," but I can't seem to figure what driver that is.
View 1 Replies
View Related
Nov 19, 2009
I can't seem to find much info on how re-flashing the Radio is different to the ROM ?
I'm on a UK Orange phone with the Modaco 2.9.
Reception is generally good, however there are times in good reception areas when I get an answerphone message come through when I havent moved away from a good reception area.. So it appears that the phone is dropping reception - I have read this before on the forum IIRC.
Hopefully updating the Radio will help? Which one and is it as easy as updating the ROM ?
View 1 Replies
View Related
Feb 5, 2012
I'm trying to port the power controls to the Echo
I've finished editing all the xml and smali files but keep getting this error
Exception in thread "main" java.lang.NullPointerException
at org.jf.util.PathUtil.getRelativeFile(PathUtil.java :44)
at org.jf.smali.smaliFlexLexer.getSourceName(smaliFle xLexer.java:2569)
[Code]..
I'm not the most experienced with this kind of thing but I've solved all the other errors without problem (public.xml was difficult).
View 4 Replies
View Related
Apr 22, 2010
I'm currently trying to flash my phone to the Android 2.1 ROM in this thread, but am stuck on updating the radio (one of the prerequisites of the howto is having the latest radio firmware).I've followed this guide to root the phone (successfully!), however the last step is updating the radio. I've downloaded the latest radio img file and renamed it to update.zip, but when I reboot (holding down the back key) I don't get an option to install this file (I get the three little skater dudes, and press vol-down for HBOOT mode etc). How do I force this to come up?As a side issue, I also don't appear to have a recovery mode any more? If I reboot recovery, my phone hangs on the Hero logo and goes no further (I've waited approx 15 mins for it to boot). How can I recreate my recovery profile?
View 12 Replies
View Related
Aug 4, 2012
i've bought u8850 vision and its a great phone .. it has 1 ghz scorpion and adreno 205 gbu .. how can i port cwm and cm9 to it ?! it has 2.3.7 firmware ?
View 1 Replies
View Related
Nov 17, 2012
My friend made cyanogenmod 9 for Huawei Vision. Its nice but WIFI is not working..
View 2 Replies
View Related
Aug 19, 2013
I've tried different cables including its own cable. Yes, I've installed drivers. Yes, I tried enabling and disabling USB debugging. Yes, I tried cleaning the USB port, both on the computer and the device. Yes, I've connected the device to multiple computers. Yes, I've power cycled both the device and the computer.
No, it didn't work.
View 6 Replies
View Related
Jan 14, 2010
Is there a setting, or an app, to turn the display red?
I do a lot of science-type stuff (astronomy), and also photograph at night. I used a red-tinted flashlight, so as to not ruin my night vision. I would love to be able to use my phone while shooting, or doing astronomy stuff out in the dark, and not have bright white glow from the phone.
View 9 Replies
View Related
Mar 3, 2012
I have installed Google Music, which I would like to use to sync/listen to music. My problem is that externally controlling playback (play/pause/skip) does not automatically control Google Music, but the stock Gingerbread Music player.
Of course, from within the Google Music app itself it works, but external control like from the CyanogenMod lock screen widget or from Bluetooth AVRCP commands it always starts playing on the stock player.
It actually works after I launch Google Music once manually. It seems to control the last used/active app automatically, which is good. But when there's nothing running, it defaults to the stock player.
Is there a way to change that? It's annoying especially with Bluetooth AVRCP and A2DP in the car..
View 1 Replies
View Related
Oct 28, 2013
my huawei vision iv installed rom superjellybean 4.1 on my vision .. i got the tutorial from this thread : [URL].... i follow the instruction but when the first booting my handset going stuck on the booting animation i want to restore it to the stock rom that i already downloaded but my pc doesnt recognize my phone (i using SUT L3)
View 4 Replies
View Related
Dec 25, 2013
I have the following issue:
My old phone is a rooted htc vision (android 2.3). I want to transfer app data (savegames, settings, whatsapp verification, etc...) to my new phone which is an unrooted nexus 5.
I have titanium backups of my 2.3 apps but i can't use them on my nexus 5 as it is not rooted.
Is there a way to use the titanium backup files with helium (which works without root)?!
Or do i have any other opportunity to get the existing app data from the old phone to the new one without rooting the nexus?
View 3 Replies
View Related
Apr 19, 2013
I'm using the official D2EXT MIUI-Rom (latest Version) on my HTC Desire, had no problems with it so far.
I've updated my SU binary with the preinstalled SU-App yesterday, wasn't thinking about any bad consequences.
I rebooted the phone and wanted to view some pictures from my SD Card: no access anymore.
Windows says, the type of my data partition is RAW. Ubuntu just says, I dont have any rights to get access on that card.
The card is definitely NOT broken! I'm restoring all files right now from my card with Recuva (Windows). But for example, pictures seem to be broken and can't be displayed.
What should I do now? Might a SU binary downgrade work? Is there any way to downgrade without a working SD card?
View 1 Replies
View Related
May 7, 2013
I have probably bricked my Huawei Vision by rewriting boot image.
However, I can connect* it to PC and it sees my phone as "Huawei Handset" (same with Windows and Linux). But Windows misses its drivers (non-bricked phone worked); Linux seems to work. No OS can connect to it using default (downloaded) ADB, nor Fastboot, nor SoftwareUpdateTool.
Its PCI ID is 12d1:c002.
How could I reflash it? I would prefer the ways without disassembling the phone.
How to boot the phone, so you can connect it to PC:
1. turn off my phone completely (vol up + power for 10 seconds - release power for a seconds and repeat it once again)
2. prepare USB cable, so you can connect it in few seconds
3. hold vol down + power and after ~1s, connect USB cable (still hold vol down)
4. when Huawei logo appears, release both buttons - your phone is connected now
View 8 Replies
View Related
Aug 11, 2010
ok, so I put the PB31IMG file on my sdcard, and the dinc_ota. I changed dinc_ota to update. (I did not name the file update.zip.zip) I powered down, I entered bootloader, and it loaded the PB31IMG and whatever. then I hit volume down and selected recovery. this brought me to clockwork recovery. I noticed the isntructions said to boot into STOCK recovery. well, I like a dummy ignored that and tried to apply the update.zip thru clockwork.
This is what I got:
CODE:.......................
So, is this because I tried doing it through clockwork recovery? is it because I didn't apply the first OTA update we got? what does that mean exactly anyways? is it saying I need to install the leaked froyo ROM, and then update the radio? How do I boot into stock recovery and not clockworks recovery? does this count as applying the update.zip once, meening if I do it again I'll brick my phone? should I sell this thing and get a samsung flip phone because I'm too stupid to own a Dinc?
View 2 Replies
View Related
Oct 25, 2010
In the last couple weeks I have started experiencing echo on my phone. Everything I say comes back to me and the other end can't hear anything. Sometimes it will take 3 or 4 calls before it starts working again. Tried figuring out if it's a specific area (which it appeared to be) but now it's worse and happening all over the place. Haven't seen/installed any updates lately, anyone else experiencing this? Next step is to stop by or call Sprint this week. Phone I believe is a version 1 f(got it on launch day).
View 4 Replies
View Related
Jul 7, 2010
Since i updated to 2.1 (ive tried villain 10.3, 11.9, 12) i get a echo while calling people which is very annoying but i think its to do with my wifi.
View 4 Replies
View Related
Nov 18, 2009
I've now heard this from a few different callers (2 in the last day).They are hearing an echo of their voice. They are calling me and it's happened when I have called them.I'm calling from my phone (no bluetooth or speaker).When it's happened I've called back and it's cleared the issue, a couple of times it hasn't. Do you think it's a hardware or network issue?
View 28 Replies
View Related
Oct 14, 2010
I am looking for an app that might let you record or see in the dark like night vision ( not the fake app ) A few of us are gonna play in the dark with a fun board we all know and some think that is a very creepy and we see if we can see what happens on camera . Any apps out there for this ?
View 6 Replies
View Related
Sep 12, 2010
"It's not limited to Android devices, but it seems that increasingly Android more than other platforms is shipping with the worst mobile bloatware. It's a bad trend that's going to lead to consumer backlash and it's destroying the credibility of Google's Android vision."
Entelligence: Will carriers destroy the Android vision? - Engadget
View 5 Replies
View Related
Aug 22, 2010
I am on Orange so I am hoping to get the Froyo update sometime this week or the weekend. I was wondering what do I need to back up prior to updating. Will I need to back up my contacts, calendar etc? Does the upgrade wipe these?
View 3 Replies
View Related
Nov 10, 2010
I have a very funny problem with my DHD news widget. It won't update. I have tried to force it to update, removed all my subscriptions and re-added them, cleared the cache and stored data. All with various cycles of turning the phone on and off. No luck. It is now a blank widget and when I try to add RSS feeds it won't list any and effectively nothing happens when I tap the widget.
View 6 Replies
View Related
Aug 4, 2010
I got the update request on my phone for Froyo 2.2. I downloaded it using the WIFI. However when it came time to install it said I did not have enough memory and took me to a screen to delete some apps which I did.
After doing this I no longer get the request to upgrade and when I check to see if there any updates available (under "About Phone") it says "there are no updates available". I checked to see what the latest firmware was and it says 2.1 so I know it hasn't updated. I have no idea how to download it again and I have called Vodafone (my service provider), HTC and Carphone Warehouse (the place I got it from) to no avail.
View 6 Replies
View Related
Aug 31, 2010
Does this guide work for updating the TELUS HTC desire to 2.2? Droid Den - Phone Guide: How To Install Rooted Android 2.2 On Your HTC Desire - Droid Den If not, where can I find the steps?
View 22 Replies
View Related
May 10, 2010
Is there a way to update all apps (with updates avaliable) with click of a button, instead of going through one by one?
View 2 Replies
View Related
Jul 3, 2010
Surface flinger turns off all pixels except for certain colors on OLED displays. Turning on only the red display results in a MUCH increased battery life. Looks like something to be included as an option in new Roms & such.
View 11 Replies
View Related
Mar 27, 2010
I am starting out as an Android Developer, and I would like to know if there are any Computer vision libraries or Augmented Reality libraries for the Android SDK, as I am planning to use these libraries for a mobile app.
I have read that if I download the NDK, I might be able to "import/use" the C openCV, and ARtoolkit libraries, but I am wondering if this is possible, or if there is a better and easier way of using these tools.
Android apps are programmed in Java, yet OpenCV & ARtoolkit use C/C++. Is there any way to use these libraries?
View 5 Replies
View Related
Apr 18, 2010
Received my HTC Desire this week and its amazing. I've ported over from another provided and it appears that Phone Information in the About Phone Section contains my temporary port number.Can this be updated? Or is this information taken from the SIM?
View 4 Replies
View Related
Oct 29, 2010
I am having issues with my desire. it wont update to the new android market 2.07 or whatever it is. my wife's desire has updated to the new market but mine hasn't. Does anyone have or know where I could get the apk file?
View 8 Replies
View Related
