General :: Huawei Vision (U8850) Bricked - Rewriting Boot Image
May 7, 2013
I have probably bricked my Huawei Vision by rewriting boot image.
However, I can connect* it to PC and it sees my phone as "Huawei Handset" (same with Windows and Linux). But Windows misses its drivers (non-bricked phone worked); Linux seems to work. No OS can connect to it using default (downloaded) ADB, nor Fastboot, nor SoftwareUpdateTool.
Its PCI ID is 12d1:c002.
How could I reflash it? I would prefer the ways without disassembling the phone.
How to boot the phone, so you can connect it to PC:
1. turn off my phone completely (vol up + power for 10 seconds - release power for a seconds and repeat it once again)
2. prepare USB cable, so you can connect it in few seconds
3. hold vol down + power and after ~1s, connect USB cable (still hold vol down)
4. when Huawei logo appears, release both buttons - your phone is connected now
View 8 Replies
Oct 28, 2013
my huawei vision iv installed rom superjellybean 4.1 on my vision .. i got the tutorial from this thread : [URL].... i follow the instruction but when the first booting my handset going stuck on the booting animation i want to restore it to the stock rom that i already downloaded but my pc doesnt recognize my phone (i using SUT L3)
View 4 Replies
View Related
Aug 4, 2012
i've bought u8850 vision and its a great phone .. it has 1 ghz scorpion and adreno 205 gbu .. how can i port cwm and cm9 to it ?! it has 2.3.7 firmware ?
View 1 Replies
View Related
Nov 17, 2012
My friend made cyanogenmod 9 for Huawei Vision. Its nice but WIFI is not working..
View 2 Replies
View Related
Aug 19, 2013
I've tried different cables including its own cable. Yes, I've installed drivers. Yes, I tried enabling and disabling USB debugging. Yes, I tried cleaning the USB port, both on the computer and the device. Yes, I've connected the device to multiple computers. Yes, I've power cycled both the device and the computer.
No, it didn't work.
View 6 Replies
View Related
Jul 21, 2013
I've been scouring the internet for the last view months since initially attempted to root my admittedly out of date htc view. A friend gave it to me in exchange for an old comp I built. I attempted through revolutionary to root, went through HTC and unlocked my device, continued to try and root it but found no proper software that worked to do so. Even tried something called mulitool which was pretty cool, but didn't get the job done. After a time I gave up on rooting, and my tablet powered down and I found myself stuck at the recovery screen. None of the options for clear storage, factory reset, or anything else proved fruitful. I removed my sd and was able to boot up fine. This was months ago. Now I'm having a similar problem only now even without SD card it's in a boot cycle where it boots to recovery for 30 seconds or so and shuts down, then back to recovery and like this ad infintum.
my screen reads:
relocked
**security warning
express pvt ship s on rl
microp 0656
hdboot 1.14 0005
radio 1.05.01
eMMC-boot
View 8 Replies
View Related
Jan 21, 2014
Recently I have rooted my android tablet and I was exploring what I could do. One guy was telling me about an app that can work with performance in game(ChainFire 3D). He said it lowers the pixels in the game to run better. I tapped the install button and it said rebooting now. It then started to reboot but then proceeded to get stuck at the boot screen. I tried doing a hard reset but it is still stuck. I have also tried flashing the stock rom, but I get installation aborted when I try and install it.
View 4 Replies
View Related
Apr 27, 2012
So I was trying out the CM7 for xperia arc by the freexperia team. It was epic. so i also tried the CM9 release by them..
-> I downloaded the CM9 anzu for my arc S
-> Extracted the files
-> Used fastboot to flash boot.img
-> And then: fastboot reboot
Instead of the FreeXperia splash screen welcoming me.. i was given a black screen.. The phone does turn on.. but then there is nothing. No splash screens. nothing.
Is there anyway to boot straight into CWM?? recovery?? Did i brick my phone for good?
View 2 Replies
View Related
Apr 29, 2013
i had a half bricked tablet. it was able to boot into recovery and i installed a rom and now it boots but the android sign is all screwed up and i cant get into CWM anymore.. am i done for?
View 4 Replies
View Related
Nov 29, 2012
I have just bricked my tablet by puting another recovery.img.. and now the tablet only shows boot screen. How can i connect it to pc to usb adb to restore it...or another method?
tabletrestigio 5197D ultra
View 1 Replies
View Related
Mar 25, 2014
i have this phone (alps e1901 v77 fwvga) aka xtouch x507 (mt6577)
i flashed the original firmware from the supplier but since then the phone didn't boot
it wont charge also, but it's being recognized by pc and i still can flash on it.and i tested the battery its charged, and also there is current drain (~50 mA)when power button is pressed
View 4 Replies
View Related
Apr 12, 2014
I'm pretty new to Android. I recently rooted my phone using Framaroot and it worked perfectly after reboot. Then I tried to install Sinhalese fonts using Sinhala Fonts Installer and after installing that, I uninstalled the app before restarting. Then I restarted the phone and it get stuck at the Huawei Logo and will not boot into launcher.
I tried to hard reset by going to recovery mode using Power + (vol up + vol down). (Fortunately I can go into the recovery mode.) Even if I factory reset the phone, the same situation is there. And some articles said to log in to fast boot mode by Power + Vol down, but it doesn't work and just boots into that Huawei logo.
As I read, to install a custom ROM, ClockWork Recovery has to be used, but I can't do it since I can't log into my phone.
Is there any way I can make my phone alive? Or at least, is there any way that I can install ClockWork Recovery without booting into my phone, just using my SD card?
View 1 Replies
View Related
Apr 12, 2014
I'm pretty new to Android. I recently rooted my phone (Huawei Ascent Y511 U30) using Framaroot and it worked perfectly after reboot. Then I tried to install Sinhalese fonts using Sinhala Fonts Installer and after installing that, I uninstalled the app before restarting. Then I restarted the phone and it get stuck at the Huawei Logo and will not boot into launcher.
I tried to hard reset by going to recovery mode using Power + (vol up + vol down). (Fortunately I can go into the recovery mode.) Even if I factory reset the phone, the same situation is there. And some articles said to log in to fast boot mode by Power + Vol down, but it doesn't work and just boots into that Huawei logo.
As I read, to install a custom ROM, ClockWork Recovery has to be used, but I can't do it since I can't log into my phone.
Is there any way that I can install ClockWork Recovery without booting into my phone, just using my SD card?
View 2 Replies
View Related
Mar 5, 2013
Today my Huawei Ascend P1 got stuck on boot screen by itself, left it on the table and when I picked it up there was only a black screen with Huawei logo, and nothing else. I tried to turn it off - didn't work, tried pressing down button and power button, tried connecting it to the computer, but nothing seems to work, it's just stuck there and I didn't even do anything.
View 4 Replies
View Related
May 27, 2013
I need the boot animation of Huawei Ascend y300 no brand, someone can send me the ''cust/'' folder?
View 1 Replies
View Related
Jan 17, 2013
stuck at boot logo
View 5 Replies
View Related
Aug 1, 2013
I have Huawei Ascend y300-0100 bought in Europe.
After many attempts to unlock it for all providers i managed to get stuck on boot screen.
I have:
Bootloader - unlocked
Access to TWRP but touche screen isn't working (Tried 3 vsrsio to make it work, but still touch isn't working)
I think my IMEI is "zero"
I can enter flashboot mood
I can enter pink screen
I tried to install stock ROM from huawei but i get error at step 2/2, same with custom ROM.
I don't have IMEI backed up.
View 3 Replies
View Related
Nov 13, 2013
My phone is Huawei u8950 (unlocked and rooted). Just some time back i flashed a boot image
But after i reboot a bluee screen appears and i'm stuck there.. No even entering to recovery mode (vol plus+ and Power). I pulled the battery off and put it again, Still after the logo the blue screen appears and stays..
How to get to the recovery..? I had taken a backup to my SD card, but as i am not able to get in to the Recovery mode i'm not able to restore the back up...
View 3 Replies
View Related
Jan 3, 2013
I've bought a Huawei u8860 today but when I try to switch on, it goes automatically ( without push any other buttons ) in recovery mode.
I've tried to wipe and format cache, but once rebooted it goes always in recovery mode. The phone is brand new, unboxed today from a box with security stickers.
I've tried to update software from sdcard with its original firmware but it fails with this error:
-- Install /sdcard/dload ...
update package's ext name error.
E: ota_pre_update error.
Installation aborted
I don't think it is a software problem, but an hardware error.
View 2 Replies
View Related
Jul 14, 2012
huawei u8860:
i compiled a kernel from the sources kernel-3.0.8-U8860-IcecreamSandwich.tar.gz .
on virtual box ubuntu 10.04 (oracle java 1.6.0u33 )with
Code:
gcc -v
x86_64-linux-gnu
gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5.1)[code]......
View 1 Replies
View Related
Mar 19, 2013
To install to clockwork recovery manually I replaced the recovery.img file but when i restarted my phone it says:
Image signature verify fail
Your boot/recovery image may have an incorrect signature.
Please update your image to a signature official one
you can remove battery for power down.
now i can access only to pink screen, but when i connect my phone with a usb cable then computer only checks drivers etc but does not open a drive where i could change recovery.img back to normal.
Maybe some drivers are missing.. Also made video of it: [URL] ....
View 7 Replies
View Related
Jun 5, 2010
I just recently try
View 2 Replies
View Related
Mar 27, 2012
will roms made for the huawei ascend 2, work on the huawei sonic, as the phones look identical, and the specs are pretty much the same?
View 1 Replies
View Related
Sep 28, 2012
I was trying to get dump_image boot from my device, but I got this instead
Code:
shell@android:/ $ su root
su root
shell@android:/ # dump_image boot /sdcard/boot.img
dump_image boot /sdcard/boot.img
sh: dump_image: cannot execute - Permission denied
View 1 Replies
View Related
Sep 27, 2012
I've a question: if I wanted to change the image of my boot rom cyanogen, in what format and size must be the picture? And in that path it should be placed?
View 3 Replies
View Related
Oct 25, 2012
Phone: Alcatel Onetouch 991D
I extracted the system.img(ANDROID partition) following this guide on windows: Creating a ROM dump of your MT65x3 device (easily found by searching google, since I can't post links yet)
I then copied the system.img over to linux(ubuntu 12.10).
opened terminal and invoked the command below to see the type of image.
mkimage -l system.img
Code:
Image Type : Davinci UBL Boot Image
UBL magic : 00720019
Entry Point: 00730065[code]...
Code:
Bad magic
how to unpack this type of image or convert it to a raw image so then I can mount it?
View 1 Replies
View Related
Feb 15, 2012
I have a Pandigital Star Media Tablet and I am stuck on the boot image and it will not do anything else except boot into stock recovery and turn off. I am able to provide anything you need to possably fix this.
Heres a list of root programs installed:
-z4root
-Superuser
-Titainium Backup Pro
- LCD Density Changer
- Root toolbox
Heres the backups I have:
-Titainium full backup
-Pandigital Backup data
-ADW launcher settings and homescreens backup.
View 3 Replies
View Related
Nov 5, 2013
I just extract the boot.img file using cygwin android kitchen in advanced option the option 12 but nothing logo.rle ... i just read some thread here [URL] .......
View 4 Replies
View Related
Jan 14, 2010
Is there a setting, or an app, to turn the display red?
I do a lot of science-type stuff (astronomy), and also photograph at night. I used a red-tinted flashlight, so as to not ruin my night vision. I would love to be able to use my phone while shooting, or doing astronomy stuff out in the dark, and not have bright white glow from the phone.
View 9 Replies
View Related
Mar 3, 2012
I have installed Google Music, which I would like to use to sync/listen to music. My problem is that externally controlling playback (play/pause/skip) does not automatically control Google Music, but the stock Gingerbread Music player.
Of course, from within the Google Music app itself it works, but external control like from the CyanogenMod lock screen widget or from Bluetooth AVRCP commands it always starts playing on the stock player.
It actually works after I launch Google Music once manually. It seems to control the last used/active app automatically, which is good. But when there's nothing running, it defaults to the stock player.
Is there a way to change that? It's annoying especially with Bluetooth AVRCP and A2DP in the car..
View 1 Replies
View Related
