My Ideos slim 7 touchscreen is not working since a few days, and the usb debugging mode is OFF
I tried to re-install many firmwares ( the original one, MTN firmware etc), but the problem persists
is there a way to turn the usb debugging mode to ON from the computer so that I can use the fastboot ?
View 1 Replies
The part with red doesn't work on my phone anymore, i can't acces the apps in the app drawer because when I press there nothing happens, also home button, menu button and back button don't work anymore. Could it be the screen digitiser?
I disassembled and assembled it to check if a cable or something wasn't right, but everything seemed ok, but even after that it's still not working.
I did a factory reset and the dock buttons worked but the 3 menu, home and back buttons didnt work and later on the dock buttons didn't work again, should i flash a ROM again? Maybe it would work then, but I'm not sure if the home button is going to work in CWM Touch.
BTW, I went to developer settings and enabled show touches and that area which is affected can't be touched at all but sometimes if I bend the phone, it gets ghost touches and even the dock gets touch inputs.
I ported ICS for my ZTE N760
booting but not unlock , touchscreen is not working
ts->input_dev->name = "Fts-touchscreen";
This file is used for FocalTech ft5x0x_ts touchscreen
How to write idc for this touchscreen
i upgrade unoficial rom,and when i restarted the touchscreen not working.
I have searched and installed a lot of original and custon roms,but it continue not working.
My tablet is Ainol novo 9 spark firewire a31 allwinner
I am using wt19i, after installing new custom rom my touchscreen and softkey are not working..........
View 3 Replies View RelatedI have a Htc Sensation, with Cm9 Nightlies. My battery was empty in the morning, it shutted down in a very weird way. I (fully) charged it, and now the touchscreen isn't working. I can get in to recovery, but i can't use it because i installed 4Ex touch, but the touchscreen isn't working.
I do can still access it from the pc, but i don't know what i can do now to fix it.
After attempting to root my device with [URL] .... My device boots up, but touchscreen doe not work. What can i do?
View 1 Replies View RelatedMy friend made cyanogenmod 9 for Huawei Vision. Its nice but WIFI is not working..
View 2 Replies View RelatedI have been using a trusty U8120 for a while now with Fresh Zodiac Fruit Rom. I was browsing on it last night and then next day the screen was just inoperable. Sometimes it would "take" some input, but it would understand something different (e.g. on a keypad, touch it in the middle "5" and it understands top right "3", but then again, "3" doesn't register either).
Here's the funny thing: it doesn't take any input whatsoever, but, if the screen is about to idle shut down and I touch it, it goes back on full light, meaning it understands the touch.. what the..?
I tried reinstalling the firmware but nothing happened.
I have a huawei u8160 (Vodafone 858 Smart) running Psyke83's Cyanogenmod 7.2 14/8/2012.
I installed the separate USB host zip using clockwork mod recovery, However the usb host mode is not working nothing happens at all when I connect a usb OTG cable to a thumb drive.
nothing lights up , no notifications , the phone doesn't light up if locked.
What should I do?
will roms made for the huawei ascend 2, work on the huawei sonic, as the phones look identical, and the specs are pretty much the same?
View 1 Replies View RelatedI have slim ics rom flashed on my samsung galaxy s 4g and it won't display any asian languages, specifically korean! It's crucial for me to type in korean, but not even the google korean ime app doesn't let me type in the language i want it to.
View 1 Replies View RelatedI have a sumvision clyclone nano slim plus 1gb model, I installed mx player on it, then I tried playing a 1080p video with subtitles but it does not seem to be working, Is it because I have android 2.3 on it? I want to know whether I need to update to 4.0 for it to work.
View 2 Replies View RelatedEarlier my phone was playing Pandora and acting fine, but I couldn't unlock it because the touch screen wasn't responding. I had just came in from the rain and my fingertips were a little wet, so I figured it wasn't registering because of that, even though it usually handles moisture on hands just fine.
After my hands wee completely dried, the phone still wouldn't respond, and all that works is the sidekeys, send, menu, and end buttons. Nothing on the screen, nor the Home, Menu, or Back buttons work. I tried removing the battery a few times, and eventually the phone wouldn't even turn back on. After trying a hard reset, it was able to turn on and finally booted up after about 10 minutes of just a SAMSUNG logo, but the screen still won't work. It turned off on it's own after a few minutes and now won't turn on again.
Are there any solutions to this, or do I have to go to Sprint and have them fix it? I have full insurance on the phone, which I assume would cover this, but I'm working all day today and won't have time to go to Sprint even if I had to until tomorrow, so I'm hoping there's something I could try here, or from the boot menu.
I have a HTC Hero 6283 from Cellularsouth and was wondering if moisture is the cause for my touchscreen not working? I've had this phone for 3 months now, but I have noticed that everytime it gets some moisture on it, the touchscreen stops working properly. I've taken the battery out on numerous occasions and sometimes it works.
View 3 Replies View RelatedI'm trying to make my own slimmed version of a ROM's .zip, by deleting some APKs and changing some other files (media, bootanaim, walls; minor changes to systemui and framework-res; etc)..
Until now, I've done it several times, but I think that I can do a more in-depth research to reduce junk files..Is there a way to find a list of LIBs and other files that are related to the APKs that I delete??. I've tried two ways:
1) Decompiling APKs and "explore" to find related files
2) Search all over the Web to find information
I am building a ROM and want to integrate The Real Dark Slim feature from SlimRoms.
I looked up alot on XDA and google it but I could not find what codes I need to cherrypick
I've had my mini pro for 3 days now and i've experienced this problem since my first initial charge.
It seems that the touchscreen does not work once i resume from standby. The keys work and so does the keypad but the system doesn't respond when i touch the screen. At first I thought it was because the phone was charging and so it doesnt operate whilst charging. However, i've encountered this problem 4-5 times with the phone discharged. The only way i can get around this is by removing the battery and putting it back in, which restarts the phone. I don't think this is normal and i've consulted with my friend who has the same phone and claims he has no issues with it so far. So what is going on here?
2nd time- phone was on standby around 3 hours
3rd time- phone was on standby 8 hours
4th time - dont remember
5th time - 10 mins (ridiculous -.-)
Im thinking it may be a phone issue and not the battery (since all the keys work except touchscreen). Also, this DOES not happen everytime phone is on standby. It acts faulty whenever it wants which is very irritating. If anyone is experiencing the same problem pls dont hesitate to post your ideas. I love this phone very much but this problem is leaving me in doubt.
Having trouble with the Ideos S7. It is not downloading any apps from the play market. Keep giving me an error "download failed". Also not downloading email attachments.
I've tried a factory reset, but no luck.
Dont know if anyone else has this problem, but during a call my touchscreen turns off, the proximity sensor stops the screen lighting up but even if i dont put the phone to my head the touchscreen stops working.
Buttons still work and i have to use them to use the dial pad. Really annoying when you are trying to navigate automated menus etc as half the time it doesnt work as they pickup too much noise from using the buttons on the front.
I dropped my phone down the toilet and now my phones touch screen wont work. At first it worked fine could use it how I did before, then it went dead. I dried it out and left it off. After 24hrs I turned it back on and the phone needed to reset it self, this was done. My phone has totally reset now but the screen don't work. There is a lot of condensation on the screen. How do I get rid of this?
View 2 Replies View RelatedMy touchscren has stopped working. I cannot even enter my pin number. What can I do?
View 3 Replies View RelatedI wonder if ne one had an major issue with their touch screen before like I had with mine. So I decided to post this little story. Let me start off with a little background info. I got my droid november 6, 5 46am central time zone. don't ask me how but the vzw dude was letting me earlier cuz I had work. I was so happy that day leaving t mobile I did love my g1 but wen I read all about the droid I felt likt I had to leave her and move on. She did do a lot for me but time tells all and it was my time go and move on.Untill two months ago (Present time I'm talking in) I realized not everyone has the bubbly keyboard. I saw friends at my unit (I'm in the army reserves) that bought the droid a couple of months after me had flat keyboards n they were bitching bout how flat it was. I agreed with them since I was woth a g1 the keyboard was a bit flat but nothing to were its such a pain, so my friend shows me his keyboard and I looked shocked played with it was like wow and I pulled my n did a side by side side comprasion and this before I saw the bubbley keyboard thread on here. So unforunately my toucscreen starting doin its own thing like it was ghost writer and spazzing out. I had no control over it this happened monday nite and I was dreading it that I will end up replacing it. But it would not let me do nothing.I couldn't go ne where on my screen it would randomly hit different icons to the point were sum times it would call my contacts. I only had control over the physical buttons. So on Tuesday during work I fought the ghost writer to let get to setting a do a system restore. First minute of the set up was ok but right wen it finish and I was on the home screen again. I was like FUDGE I don't want to replace my rare Droid. After work I replaced it, I was real pissed I had the bubbly keyboard and (something I didn't noticed untill I got my replacement) the golden plated volume side button. I miss my precious rare droid. I was soo proud to be first non employee to have the droid in houston.
View 10 Replies View RelatedSo I have been patiently waiting for a slim extended battery for the Motorola Droid. I have even been searching ebay to see what I can find and at last I found something.
1600MA Battery For Motorola BP6X Droid A855 Cliq MB200 - eBay (item 390150571975 end time Mar-02-10 01:03:07 PST)
I found this 1600mah battery for under $10. I was wondering if anyone had any success stories with inexpensive bootleg batteries. This battery is only 200+mah over stock. It might have less than 20% extra power.
I bought a cheap A-13 MID of the internet and flashed a firmware for another variant common problem with these devices so i have no touchscreen and the usb has snapped of tried soldering it but was unsuccessful.
I have recovery installed but only way i can use it is through novotools but need touch screen.
So i need a way to flash firmware through sdcard on boot (Can be done, can't find guide though)
Or a script that will run reboot-recovery.sh on boot from sd or maybe emmc
Or that will run when the sd is mounted so that if i insert an sd card into the device with reboot-recovery.sh script on it it will reboot to recovery
If anyone has actually purchased the non slim version of the seidio extended battery on the droid, can you report your thoughts here?
1) What kind of battery life are you getting now vs before?
2) How much does the cover screw your ability to lay the phone down on a flat surface and type with any of the keyboards?
3) Is it worth the price?
I'm confused on this product? Is it suppose to have the same mAh as the regular extended Life battery just a different design can anyone help me here thanks. the link is shown below. Innocell Slim Extended Life Battery
View 5 Replies View RelatedLooks like the seidio is 1350mah. Lol, isnt the stock battery 1400mah? Innocell Slim Replacement Battery
View 23 Replies View RelatedCan anyone recommend a good slim case and film?
View 23 Replies View RelatedI have been trying to find a way to control my phone from a touchscreen. I have a samsung galaxy running android and would really like to hook it up to my touchscreen in my car. I know there is a module called mimics that allows it to be done. It is difficult to install into a monitor tho. Any way to connect it to a touchscreen another way? Maybe a Mirroring app and cable(s)? My galaxy has a micro usb out, it can be used as a video out maybe?
View 1 Replies View Related