I have a generic tablet
Memory size : 256
Model number : generic
Firmware version 1.6
Kernel version: 2.6.29-00236g4f8dbbb-dlrty
Build number : WMT2.1.2_88
So I have the huawei dongle model E1552 and i want to try it.... How can install the driver to use the dongle"?
View 1 Replies
I would like to know if there is an android app or any other methods or fixes or any ways to be able to make calls like a phone from a 3g unlocked dongle on a tablet pc that supports usb 3g dongles like there is software for pc's such as mobile partner? The 3g dongle already supports call making and sms sending features. I have scoured the net for a solution but to no avail.
View 1 Replies View RelatedWhen i put my android tab idle it screen turn off(idle mode) internet disconnects i saw there is no power in the dongle(means no light is glowing from the dongle)
What to do my tabs specs are
ICS 4.0.4
Mali 400
allwinner a13 1GHz processor
512 ram
I've been trying to find a tutorial on how to root my device, the Go Clever Terra 72, and still had no luck. Is there a way to root these type of generic tablets?
View 1 Replies View RelatedI have a generic Chinese 9.7inch tab, that looks almost identical to a Ipad1.
It is very similar to this: Enjoy Tab T91 Although its on Andorid 3 i think.
I am wanting to install Cyanogenmod, or android 4.
how i will find the correct Rooting and rom?
I have a generic tablet thats rooted , this is confirmed by root checker & validator , but i have no Su binary ?
All i want to to is make one directory writable so i can add the media line to permissions for external storage , as this has been a pain not being able to use , but whatever i try doesnt work , Su & super dont work as they state no Su binary , so im at loss as to what to attempt next ?
ANDROID VERSION 4.2.2
KERNEL VERSION 3.3.0+ (WED JULY 31ST 2013)
SOC CHIP = SUPER DOULCORE A20[code]......
I tried possibly ever option on le google (and some here) but to no avail. Installed every program suggested on the net (unlockRoot, onclickroot, etc etc) as well as the necessary programs (SDK, ADB drivers etc) but it just seems it is impossible. So I turn my plead towards you, after two full days of struggling with this stupid thing.
How can I root my 4.0.3 ICS generic tablet?
Specs
Beeldscherm:10 inch (24,7 cm) capacitive 10 point multi touch display
Resolutie :Scherm resolutie 1024 x 768 pixels
Aspect Ratio:4:3
Orientation :Automatic
I have a Double Power EM63 tablet from Walmart. I believe it is identical to the Ematic EM63 and the MID-AM789 (Google "AM789" for specs since I apparently can't post links yet). I rooted it using Shaume (It's not in english, I just clicked the button that said "root"). I was trying to improve the tablets gaming performance, so I installed the Chainfire 3D driver, and now my tablet won't boot. It gets stuck on the "DOPO" logo, never gets to the boot animation. I can enter recovery mode, so I tried the "wipe/reset" option, but it didn't work. I think I need the stock ROM or a compatible custom ROM to flash to the tablet so it can run again, but I can't find any ROMs that would work and don't really know how to flash it.
View 8 Replies View RelatedI have a tablet and its a clone of momo9-3s .The original firmware i have do a backup, and i have installed a firmware from a momo 9 site. Now the tablet go good, but I dont Have the sensors of accelerometer and the pshical button dont are right ( example: volume + for tablet is back button ) .Now, I can solve ??For example exist one file of original firmware that I copy on the actual firmware?
View 1 Replies View RelatedI have a Fujitsu M532 tablet What driver am I required to make use of ADB debugging?
View 3 Replies View RelatedI've two identic tablet.In one of this the wifi connection don't work properly, so I decide to install custom rom, but don't work the touch.
I find the original rom, and I reinstall it. But now the g-sensor don't work.So I've found another rom, in wich the wifi don't work, and the g-sensor yes.
My question is: is there a way to change or wirte a file to work properly wifi and g-sensor?
What I've to change? Wich file drive the g-sensor or the wifi in android?
The two rom has rooted, so I can fully access to all files!
Where I can get the device driver for the Ampe A10 10.1" tablet.
Windows 7 x64 detects a device called "Android" when you connect the tablet and says no driver found.
The tablet does not appear on the device chooser in the eclipse development environment.
i have a chinese tablet (Teclast P98HD A2Q6) with some very good specs it has 4.1.1 but it's laggy there's another tablet called (PIPO M6) with the same processor and display & it has 4.2.2 with the latest SDK for the chip.can i upgrade my tablet with PIPO's firmware ?
View 9 Replies View RelatedIn case anyone else is having problems getting their Incredible to connect, the easiest way I found to install the USB drivers are with the HTC sync program here:
http://member.america.htc.com/download/Driver/DROID_INCREDIBLE_Verizon/HTC_Sync_2.0.33.exe
The google SDK driver doesn't yet work with the Incredible, and though it can be hacked - this download might be easier for some.
As you know usb drivers are required by every activities. But Videocon A15 & some other mobiles have not official drivers. So how can I install usb driver for those mobiles?
View 2 Replies View RelatedVideocon A15 little RAM makes trouble for me. So I want to root my phone to use it in a better way, but I have tired by finding usb driver for videocon a15. But I can't find any usb driver. So I want to know how do I install usb driver for this handset?
View 9 Replies View RelatedMicromax does not provide any drivers for its phone - Micromax ninja a89. We are trying to use the phone for development and are unable to install device driver in windows 8.
We tried the adb drivers at - [URL] and got the error - Windows found driver software for your device but encountered an error when trying to install it. Android ADB INterface- The system cannot find the file specified.
We even tried this link - [URL] But that does not solve the problem. How do we install adb driver for micromax a89? Is there any other workaround to use the phone as a development device?
I Have a Nexus 7 and recently I found that I needed to use ADB for something and I had used my Nexus 7 with ADB on this computer before (thats how I installed KitKat) but whenever I connect my Nexus now it says that is not configured correctly and when I attempted to install the ADB driver it said windows encountered an error. I am currently running windows with Driver verification disabled and on test mode. I am also running windows in test mode so that it wouldn't block the driver. I have tried every driver possible from the one in the SDK to the intel android adb driver and even PDAnet. I have checked inside the driver file that it is properly registered for my nexus 7. I am running Windows 8.1 on my computer and android 4.4.2 kitkat on my Nexus 7.
View 1 Replies View Relatedit's almost 2-3 hours that i'm stuck with instaling drivers on pc for my Prestigio Multipad PMP5097CPRO. I wanna root it, but I need first to install drivers propery to debug via USB.
Root with "ICS Root Unlocker"
I used that guide sendspace.com/file/4dwex1
tried with different versions of Rockusb, but still the same. (unable to install drivers) .I even tried different usb cable/port/ and pc, but no work (win7 64bit)
ADB driver don't work too. I've read this thread but find nothing similar http:/[url]....
I want to connect my CS-918 Android TV Box to my Pc.I have Win 7 64Bit. I download the Rockusb_v3.5 drivers, in the device i set the USB Debug mode, When i connect the USB cable, In the Windows Device Maneger it recognize as CS918. I tried another cable and the same....Then i click 'Update Driver' select the path of the 'Rockusb' but it does not installing it.
View 3 Replies View RelatedI am using htc hd2 and wana play shadowgun on it. I downloaded its non tegra version..The game launches fine but it crashes back to home screen after the intro..So i downloaded chainfire pro .. but when click on install driver . The msg appeared dat " need 1022987 more bytes"..But i had 190 free ram ... 45 mb free phone storage and 4gb free on sd card..
View 6 Replies View RelatedI'm about to flash my B92M (SIII Clone) MT6577 but I need to make sure that I have everything set up. This is my first time flashing a phone and I don't want to mess it up.
So basically I'm having trouble installing the MediaTek DA USB VCOM Driver and I'm not even sure if I'm trying to install the right one. How do I go about installing this? And download link for one that supports MT6577 or does the MT6575 one work with it?
Got a U9510, D Quad (unlocked and unbranded outright) (didn't see my phone listed so posting in this section)
Worked great, rooted easily. Installed Chainfire 3D, was all fine. Uninstall as decided I dont need it.
Then stupidly decided to try reinstall and try Beta EGL driver after browsing and finding some EGL level support.
Now the screen is blank, no lights, no boot logo, nothing, and I want to cry. (Though I have not been able to pull the battery)
Plug in via USB still shows up as Android device etc.
I dont know how to pull the battery on this phone, it's not easily accessible, I took the screws out of the back plate and tried to lift up the plate but couldn't see how to do it, so just put the screws back in.
Also it's new, so no SD card yet, internal only.
USB Setting is default to storage device, but internal doesn't show up on that setting, it does on MTP.
What steps to recovery?
Most similar issue I've found is this, but only seems like the same symptoms, not same cause: [URL]....
No mention of EGL, and I had no problems with Chainfire until I tried EGL.
Anyway to uninstall the driver over USB? And how to get the backplate off without damage to pull the battery?
I don't have anything critical on the phone storage I can't replace easily, have flashed roms before etc, but prefer to recover/undo if possible. And again with the storage issue, how would I gain access to the internal storage without the screen on?
edit: The removable disk drive shows up for the SD card (but obviously inaccessible since no microSD in phone), but I'm poor till wednesday night, so cant go out and get a microSD to attempt a fix yet.
HiSuite can't connect to the phone (HiSuite USB mode needs to be turned on OR USB debugging, debugging is) so I presume the phone is not in a fully powered on state running the OS (unable to start graphics driver etc).
edit2: The manual states if I want to change the battery to contact an authorised service provider (!), but can hold the power button for more than 10 seconds to force a restart (but I wonder if that will work in its current state?)
I wanted to install Candy Crush game into my Huawei phone that has Android 2.3 but I keep on getting a message that I do not have enough storage? I recently installed a Kingstong 16gb micro SD card and changed the setting to have apps installed on my removable SD card. Why can't I installed any new apps?
View 19 Replies View Relatedi rooted my phone few days ago and out of curosity i used the root explorer to move all the system apps to my SD card. the phone shutdown and on an attempt to reboot it never did pass the screen after the at&t logo. it keeps on restarting from that point. .
View 1 Replies View Relatedi tried installing CWR on my huawei ascend g610-u20 but unfortunately the phone went into bootloop .
View 9 Replies View RelatedCan't install my custom firmware for my huawei u8650. Once i have yesterday installed custom rom my batery was discharged so now then i press vol+,vol- and turn on butons at once and then it stucks! here the update text file from sd card:
filename = a:dloadupdate.app
Failure: CRCMD5_RSAŠ£
Failure: operation did not succeed.
Failure: operation did not succeed.
[code]....
The procedures mentioned to root or install CWM Recovery in Huawei x3 U8510 requires you to go to USB Debugging mode in Settings but my device does not have a working Stock ROM.
I am able to boot into the Stock Recovery mode (Volume + and power button) but unable to install CWM(tried several versions for U8510), SU, Custom ROM etc cuz it says signature verification failed even though I tried cmw zip files which were signed.
I tried going into download mode by pressing Volume - and power button that didn't work too. Even though the Huawei symbol came up I couldn't root the device using
P.S: I couldn't find any of the latest ROMs for this device too!
I 've bought HuaWei U8836D Ascend G500 pro Shine. Now i can root it.
When i try install google play but fail. It could not start. how can i install it ok to myphone??
i have try many method from other website but still not working...
View 2 Replies View Related