I have a tablet and its a clone of momo9-3s .The original firmware i have do a backup, and i have installed a firmware from a momo 9 site. Now the tablet go good, but I dont Have the sensors of accelerometer and the pshical button dont are right ( example: volume + for tablet is back button ) .Now, I can solve ??For example exist one file of original firmware that I copy on the actual firmware?
View 1 Replies
I have a Fujitsu M532 tablet What driver am I required to make use of ADB debugging?
View 3 Replies View RelatedI've two identic tablet.In one of this the wifi connection don't work properly, so I decide to install custom rom, but don't work the touch.
I find the original rom, and I reinstall it. But now the g-sensor don't work.So I've found another rom, in wich the wifi don't work, and the g-sensor yes.
My question is: is there a way to change or wirte a file to work properly wifi and g-sensor?
What I've to change? Wich file drive the g-sensor or the wifi in android?
The two rom has rooted, so I can fully access to all files!
Where I can get the device driver for the Ampe A10 10.1" tablet.
Windows 7 x64 detects a device called "Android" when you connect the tablet and says no driver found.
The tablet does not appear on the device chooser in the eclipse development environment.
I have a generic tablet
Memory size : 256
Model number : generic
Firmware version 1.6
Kernel version: 2.6.29-00236g4f8dbbb-dlrty
Build number : WMT2.1.2_88
So I have the huawei dongle model E1552 and i want to try it.... How can install the driver to use the dongle"?
My girlfriend has a Nexus 7 and I have a Hisense Sero 7 Pro. I have one bluetooth receiver in my car and another bluetooth headset. When either tablet is conencted to either bluetooth device, pressing the call button does nothing. I have tried autovoice with tasker with no luck. Is there anyway to get these tablets to recognize when the bluetooth button on the bluetooth devices is pressed? I notice in the menu in settings for each bluetooth device that there is only the option for "use for media audio" and not "use for call audio." If this is the reason is there anyway to modify jelly bean 4.2 to add the use for call audio option?
View 1 Replies View RelatedI am developing a game. In which the user controls movement using the accelerometer. Sounds effects can also be enabled. However when laying the phone flat down and playing the game without the accelerometer gives nice 0,0,0 values. However when play WITH SOUNDS on, i get a buch of weird values: while the phone is NOT moving.
This is really a big bug that makes life hard for Game Developers. I tried to take an avarge of the last 5 values from the sensor.. but this is not enough.. The harder the sounds plays: the higher the weird sensor values. When using the headphones: almost no weird values. Seems that sounds interferes with the accelerometer sensor.
I have a Nexus 7 tablet and every few days I notice a few new apps on the device. I'm not sure if they're full apps or just simply icons to download apps or get more information. I have tried to avoid using them. I know previously I had a couple apps that were sending notifications to the notification system that I considered to be spam. After some research I found out how you can find out which apps are doing it and disable notifications from those apps so that took care of that.
View 4 Replies View Relatedi have a chinese tablet (Teclast P98HD A2Q6) with some very good specs it has 4.1.1 but it's laggy there's another tablet called (PIPO M6) with the same processor and display & it has 4.2.2 with the latest SDK for the chip.can i upgrade my tablet with PIPO's firmware ?
View 9 Replies View RelatedIn case anyone else is having problems getting their Incredible to connect, the easiest way I found to install the USB drivers are with the HTC sync program here:
http://member.america.htc.com/download/Driver/DROID_INCREDIBLE_Verizon/HTC_Sync_2.0.33.exe
The google SDK driver doesn't yet work with the Incredible, and though it can be hacked - this download might be easier for some.
On my droid phone, I get what I consider a proper pause/stop/resume/restart sequence when the home button is pressed and I then select my application. However, I'm testing on a new Samsung Galaxy tablet and when I select my application after having pressed the home button, a new activity is being launched. I do not understand why the behavior is different on the Galaxy. Any ideas? I have removed orientation config changes in the manifest, so it's not that.
View 1 Replies View RelatedI am recently doing a graduate research on the accelerometer in mobile devices. Accelerometer is a MEMs device built in almost every smart phone nowadays. I am interested in finding what information does the hardware accelerometer report that the software knows the raw values X, Y, Z to detect the orientation in which the phone is held?
View 1 Replies View RelatedI got my son a Karbonn A30 yesterday, and so far, the auto rotation as well as acceleration stopped working twice. I tried formatting cache but it did not work. the only workaroud is to open the phone, remove battery and restart again. I could not get any solution except the battery removal one.
View 4 Replies View RelatedI think that is for a malfunction of GPS fault driver. I wanted existing driver that is from Custom Rom / system / app / YGPS.apk replaced by the factory driver.
I have a Nandroid backup of the factory ROM (file: boot.img, cache.img, data.img, system.img and nandroid.md5).
But I do not know where this factory driver is located. How removed from Nandroid backup and put in a cell phone.
Picked up a Maxwest Orbit Z50, overall it is a solid off brand phone, but I have hit a wall trying to find USB drivers for it. The VID is 24E3 and PID is 9025. The phone has a Qualcomm Snapdragon MSM8625Q Processor. Trying to get the drivers to see if any of the root methods out there will work.
View 2 Replies View Relatedi wanted to start android development on a real, but not too expensive device. URL....The manufactorer is CUBE:URL>....It works fine and i wanted to connect it to my PC, running windows 7.The problem is: I could not find any usb driver on the (chinese) manufactorer site.
In the device manager the device was listed as "K8GT_W" and marked with "no driver installed".if there is a driver for this device or how to use some "generic" usb device driver with this device?
I downloaded the google USB driver with the android SDK manager.The i selected "update driver" from the device maanger + selected the google usb driver download directory.This shows the message "K8GT_W could not be installed".
I am porting the Sony Tablet S ROM (Honeycomb) to my Toshiba Thrive. I got most things working but I cannot get the damn wifi working. Logcat says "Unable to load wifi driver". Kernel is 2.6.36.3.
Typically this is a kernel / wifi module issue but I am using the same kernel/module that I use with all other ROMs I make and it works fine. I've copied over all wifi libs, wpa configs, etc but I'm at a loss. This is the biggy that is keeping me from releasing this ROM.
I've just got a Eken T01 Tablet bit of a bargain to be honest :) Anyway.....
I would like to add a usb gps driver to it. Now from what I understand I need a few things.
1. USB Host
2. USB Linux Drivers
3. Root
I have all three and the driver is a PL-2303 USB to Serial Driver. From what I can gather I need to put these c.
files into a specific folder on my tablet and then edit a couple of files to load these drivers on startup ?
Am I going down the right root ? or completely off the mark ?
I've tried to do alot of reading but not getting far really because most tablets either have built in gps or they dont normally have a host usb port.
Linux Kernel 2.4.31 and above already includes built-in drivers for PL-2303H, PL-2303XA/HXA and PL-2303HXD.
NOTE: Google Android OS is also based on Linux kernel so it also supports PL2303.
does that mean it already has a driver installed and I'm just missing something ? How would I check ?
I have the following problem with an android tablet (ainol captain).For the moment I am using a stock firmware (fw A) where almost everything works good except for the battery.On another newer stock firmware (fw B) almost everything works good except for the sound when the headset is plugged in.
I tried installing Pimpmyrom in which you can install an 'enchancing' sound driver but it didnt work. The sound did get a bit better. I also tried viper4androidFX with the same 'a bit better' result. I dont think this is a hardware problem since sound works fine one fw A.Is it possible to backup the sound driver and/or settings from fw A and install these on fw B?
As you know usb drivers are required by every activities. But Videocon A15 & some other mobiles have not official drivers. So how can I install usb driver for those mobiles?
View 2 Replies View RelatedHow to add Ericsson driver into android 4.0???
Here is the iso : [URL] ......
And here are drivers: [URL] ......
i just wanted to know how to update the drivers of my android device i want to update the drivers of my mali 400 gpu how to do it
View 3 Replies View RelatedVideocon A15 little RAM makes trouble for me. So I want to root my phone to use it in a better way, but I have tired by finding usb driver for videocon a15. But I can't find any usb driver. So I want to know how do I install usb driver for this handset?
View 9 Replies View RelatedI recently bought my new phone Xolo Q800, and it's also my first Android device.
One thing - no driver to connect my phone in USB debugging mode when I have to run my Android apps on my phone from Eclipse
I even sent an email to Xolo support, but haven't gotten any reply yet. I remember many Q800 users here talking about the phone here when it was launched.
I have a BLU Quattro 4.5 android device and when I try to connect via USB Debug mode and run ADB Device it will not find my phone. I have searched high and low in order to locate the driver with no luck. The generic USB driver from google won't even work. I have even run emulator from the phone and when I type: pm set-install-location 2, it comes back with Killed and then back to command prompt. When I type: pm get-install-location it comes back as 0[auto]. My phones main memory is 1 gb and 1.5 internal usb memory. With all of the main system apps updated on the main drive, the phone cannot handle ANY other apps, even when I put apps on the usb memory it is very sluggish. I am trying to install and run all of the apps from the external sd card and just have the system apps running on the main disk. I would also like finding the driver needed to access the phone in ADB.
BLU Quattro 4.5"
4 GB Internal Memory( Broken up to 1 GB Main, 1.5 GB USB Storage, and not sure where the other .5 GB went.)
1 GB Ram
NVIDIA Tegra 1.5 GHZ Quad Core
16 GB Class 10 Micro SD Card
Android 4.0.4 ICS
Unlocked Running Straight Talk/T-Mobile Sim
Somehow I managed to get my PC to only recognize ROMaster ADB drivers only; but it doesn't work properly with ADB commands on my computer. I would like to revert it back to only detecting "normal" adb devices.
I believe I had install ROMaster Setup previously for data recovery purposes but have it uninstalled since.
I have tried to reinstall ROMaster Setup and uninstall it. Run Ccleaner and clean up the registry, uninstall and reinstall Google SDK (USB Drivers).
I have tried to manually select driver to install but only two ROMaster selection appears.
Using Windows XP.
How do you upgrade the OS and flash driver on the LG Phoenix its been rooted and unlocked.
View 1 Replies View RelatedMicromax does not provide any drivers for its phone - Micromax ninja a89. We are trying to use the phone for development and are unable to install device driver in windows 8.
We tried the adb drivers at - [URL] and got the error - Windows found driver software for your device but encountered an error when trying to install it. Android ADB INterface- The system cannot find the file specified.
We even tried this link - [URL] But that does not solve the problem. How do we install adb driver for micromax a89? Is there any other workaround to use the phone as a development device?
How we can have on driver zombies the tegra 4 graphics on our prossecor like Dead trigger 2 hack?
View 2 Replies View RelatedI Have a Nexus 7 and recently I found that I needed to use ADB for something and I had used my Nexus 7 with ADB on this computer before (thats how I installed KitKat) but whenever I connect my Nexus now it says that is not configured correctly and when I attempted to install the ADB driver it said windows encountered an error. I am currently running windows with Driver verification disabled and on test mode. I am also running windows in test mode so that it wouldn't block the driver. I have tried every driver possible from the one in the SDK to the intel android adb driver and even PDAnet. I have checked inside the driver file that it is properly registered for my nexus 7. I am running Windows 8.1 on my computer and android 4.4.2 kitkat on my Nexus 7.
View 1 Replies View Related