i have a chinese tablet (Teclast P98HD A2Q6) with some very good specs it has 4.1.1 but it's laggy there's another tablet called (PIPO M6) with the same processor and display & it has 4.2.2 with the latest SDK for the chip.can i upgrade my tablet with PIPO's firmware ?
View 9 Replies
My tablet is a JXD P300 with Android 4.0.4. Tetando set the external SD card as internal SD did some wrong procedure even went to settings and turned off the internal SD card. And now the tablet is stopped on the first home screen. Looking for firmware for it?
View 2 Replies View RelatedHow to extract a firmware from a tablet?
View 2 Replies View RelatedHere's my situation. I have 5 tablets and all being Acer A200's. One of them works fine, but the other four are stuck on the acer logo.
There is NO support for these tablets anymore, no honeycomb roms available to download, etc.
Is there any way that I can basically copy the whole rom/bootloader that's on the working A200, and put it on all the other tablets?
Dopo TD-1010 http:[url]....
I really need to find a stock firmware img for this tablet. I accidentally removed something from the system
I recently bought tablet Matrix d7030. where to download latest firmware for it or if I could use firmware of another device. how to root this specific tablet?
View 1 Replies View RelatedSpecs:
OS: Android 4.0
CPU: Boxchip A13 Cortex A8 1.2GHz Processor
RAM: 512MB DDR3
Files supported: Audio Support: MP3, WMA, OGG, APE, AAC, FLAC, WAV
Video Support: MPEG1/2/4, H.263/H.264, RMVB, RM, MOV, DAT, VOB, EMV/VC-1, MVC, AVS, MJPEG, AVI, ASF, TS
Picture Support: JPG, JPEG, GIF, BMP, PNG
Battery: 3.7V/1400mAh
Camera (Rear Facing)
I have a sanei N83 fashion (if i'm right)
With android 4.0.4, 51 ram, cpu 1ghz A13, ...
I have the Windows 8 interface and i don't like it, the tablette seems too realy slow (when i want to enter my credential for facebook, in candy crush, the tavlette always crash, ...)
so i want a custom firmware lighter, faster and without the Windows 8 interface.
I just got the v711s tablet directly from china and I tried to flash it with a new firmware but I didn't took the good one. Now the touch screen doesn't work and I'm unable to reflash it to an other firmware.Also the boot manager is not responsive so no chance on this side (also I don't have volume button on the tablet).
What should be my next step? Is a hard reset via SD card available ? Is there a way to get boot manager working ?
i got an bootloop at my Presitigo PMP5580C (same as Intenso TAB 814). The recovery mode (Power + vol+) wont work.
How to flash the firmware to the tablet?
I installed Android SDK and the Drivers. But what to do now? What Software did i have to use to flash und what file (Firmware) to flash?
I have a Nexus 7 tablet and every few days I notice a few new apps on the device. I'm not sure if they're full apps or just simply icons to download apps or get more information. I have tried to avoid using them. I know previously I had a couple apps that were sending notifications to the notification system that I considered to be spam. After some research I found out how you can find out which apps are doing it and disable notifications from those apps so that took care of that.
View 4 Replies View RelatedI have bought a GADMEI E8HD Tablet from efox. Its a great Tablet, uses 0912 as Firmware and it runs fine!
And then, Firmware 1011 is coming out. OK, no Problem. Flashed it and then: DEAD.
Nothing. It stays Black, doesnt do anything, even on USB.
I know from [URL] .... and [URL] .....
I bought a tablet without a name. I would like to install CWM to make a backup of the rom. How do I do? Rom Manager says: device not listed above The tablet is already Root
Phone model: TAB950
Brand: DJIX
Hardware CPU: sun5i
CPU model: ARMv7 Processor (VFPv3, NEON)
CPU frequency: 30 ~ 1200MHz
Screen resolution 800x432
Screen density 160dpi
Render GPU: Mali-400MP
Android version: 4.04
Kernel: Linux version 3.0.8 +
I bought just for try a tablet on Ebay - Name: N500 8G, Allwinner. Name of the model: BC1077, verzion of Android 4.0.3.
The problem is that the android 4.0.3 does not sync google calendar.
I've buy HCL me G1 tablet, but it dos'nt have play store. I tried many solutions that i've read from the net to solve that problem, but it dos'nt work. install play store on my Tablet.
View 5 Replies View RelatedWhen I set up my tablet it synced a few apps from the play store, but since then I have installed a bunch of other ones on my phone that I want on my tablet.
View 5 Replies View RelatedI'm with this machine the tablet DENVER TAC-10011.
in this tablet i can install another rom?
I have an el-cheapo chinese 7" tablet with an Allwiner A20 dual core processor, which I bought off eBay (about tablet read "Wing", but that's about all I can remember).
It has a 512mb RAM and 4gb internal storage. I also have a 32gb TF card.
I thought (for some reason) that putting ClockWork Mod on would be a good idea, if I wanted to flash something like Ubuntu Touch, or CyanogenMod.Unfortunately, I hadn't reallised that the version of Clockwork Mod was not appropriate for this device, and booted to recovery.Needless to say, it didn't even make it that far... It'll only go as far as the very first logo, and no further.
i want to root my SmartQ T20 tablet and install xRecovery, CMW or samething but i don't know how,
View 1 Replies View RelatedI have a BRONCHO brand crane-a710 tablet with Android ICS (OEM is not a global supplier). And, i have a Huawei K3765 3G USB modem which i use its phone feature with my pc. I want to use the voice call function of this USB dongle with my Android tablet but unfortunately can't. When i make a call to the modems phone while it is attached to tablet, i have the dialing tone on my cellular. But tablet doesn't seem to detect the call and it has no response. Also my tablet has no usable phone features (Phone, SMS and contacts functions are not presented). Now that's the question: Can i install phone featurs to my tablet (and where can i get the necessary files) or is there any phone mode Android ICS ROMs for my BRONCHO crane-a710 tablet???
View 1 Replies View RelatedCan I install windows 7 on my samsung galaxy note 10.1 (gt-8010)?
View 1 Replies View RelatedI is it possible to instal Windows mobile on an Android Tablet with ARM procesoor ?
View 3 Replies View RelatedMy device:
I have an iDeaUSA YG A777 Android Tablet that is rooted. The version of Android it is running is 4.0.3.
My problem:
I updated the YouTube app from Google Play Store a few days ago. After it was updated, I tried to open it, but a message popped up saying that I needed to install Google Play Services and linked me to the app's Play Store page. Google Play Services downloads fine, but during the installation process, an error message pops up, saying:
"Incompatible with other applications(s) using the same shared user ID."
I don't have a custom ROM or a custom kernel; they're both stock.
I have a generic tablet
Memory size : 256
Model number : generic
Firmware version 1.6
Kernel version: 2.6.29-00236g4f8dbbb-dlrty
Build number : WMT2.1.2_88
So I have the huawei dongle model E1552 and i want to try it.... How can install the driver to use the dongle"?
how to install google play and other gapps on coby kyros mid1060 tablet?
View 2 Replies View Relatedhow i can install new os android from sd card or anything method can do it ??? currently my existing os is 4.0.4 but my os get problem something wrong so i want to do is format the existing os then install new os android 4.1.1 to inside... my tablet is no branded product just in market is mix product from china or taiwan brand product..
View 1 Replies View RelatedSo awhile back my tablet was acting up and being slow. So I held down the power button to reboot it but when I try starting it back up again it goes through the normal process up until a black screen with the word android that is in blue and is flashing. It always stops here. Also whenever I plug it into my computer it just says that there is no driver found I have a MID M9000 9" Android 4.0 Capacitive Touch Tablet PC - 1.2Ghz, 8GB, 512MB, Wi-Fi (White) The picture is where the screen is stuck
View 3 Replies View RelatedIt does not load past the android screen despite being plugged in for several hours. I have held the power button down, tried resetting it and pressing various other combinations of buttons at the same time. I put an SD card in it.
Android OS 2.2
Kernel 2.6.32
Build Number V1.5.2
I'm having an issue with my tablet, an Onda VI40 Ultimate. It was left off for a day or two, and when I plugged it in yesterday I got the battery screen, but it was in orange and showing that it needed to be charged. I figured I'd leave it alone for a few hours, then come back to it.
I left it plugged in for four hours, but when I came back to it the tablet is just giving the same message. I took out the charger, plugged it in again and got the same screen. I plugged it into my desktop pc via usb cable, and it just gives the same screen over and over. I got another charger, one exactly like it, and plugged it in. Same screen again. I pressed the reset button, same screen. I tried holding down the power button and volume up button, but no deal. I have the latest CM9 build installed on it, with ICS 4.0.4.
I have included below a terribly blurry photograph of what I'm seeing when I try to turn it on, or do anything with it. The tablet just never seems to charge no matter what I do, nor will it boot in any way.
Thinking about getting the moms a tablet for Christmas. Loving the reviews of the Asus Transformer but my original plan was getting her a 4G device so that she can use it even when wifi isn't available. Just wanted thoughts and opinions from those who have had experiences on either end and any recommendations.
View 5 Replies View Related