Where I can get the device driver for the Ampe A10 10.1" tablet.
Windows 7 x64 detects a device called "Android" when you connect the tablet and says no driver found.
The tablet does not appear on the device chooser in the eclipse development environment.
View 2 Replies
No matter how many times I reinstall the device drivers, they all install correctly besides the Android ADB Device driver.
View 4 Replies View RelatedI have a tablet and its a clone of momo9-3s .The original firmware i have do a backup, and i have installed a firmware from a momo 9 site. Now the tablet go good, but I dont Have the sensors of accelerometer and the pshical button dont are right ( example: volume + for tablet is back button ) .Now, I can solve ??For example exist one file of original firmware that I copy on the actual firmware?
View 1 Replies View RelatedMicromax does not provide any drivers for its phone - Micromax ninja a89. We are trying to use the phone for development and are unable to install device driver in windows 8.
We tried the adb drivers at - [URL] and got the error - Windows found driver software for your device but encountered an error when trying to install it. Android ADB INterface- The system cannot find the file specified.
We even tried this link - [URL] But that does not solve the problem. How do we install adb driver for micromax a89? Is there any other workaround to use the phone as a development device?
Now I'm using ICS 4.0.4. Flashed by walton customer service.but i can't flash cwm. pc is not getting my device. i think it's driver problem. i tried many ways, but no progress. windows 7 64 bit.
View 2 Replies View RelatedI have a Fujitsu M532 tablet What driver am I required to make use of ADB debugging?
View 3 Replies View RelatedI've two identic tablet.In one of this the wifi connection don't work properly, so I decide to install custom rom, but don't work the touch.
I find the original rom, and I reinstall it. But now the g-sensor don't work.So I've found another rom, in wich the wifi don't work, and the g-sensor yes.
My question is: is there a way to change or wirte a file to work properly wifi and g-sensor?
What I've to change? Wich file drive the g-sensor or the wifi in android?
The two rom has rooted, so I can fully access to all files!
I want to connect my CS-918 Android TV Box to my Pc.I have Win 7 64Bit. I download the Rockusb_v3.5 drivers, in the device i set the USB Debug mode, When i connect the USB cable, In the Windows Device Maneger it recognize as CS918. I tried another cable and the same....Then i click 'Update Driver' select the path of the 'Rockusb' but it does not installing it.
View 3 Replies View RelatedI have a generic tablet
Memory size : 256
Model number : generic
Firmware version 1.6
Kernel version: 2.6.29-00236g4f8dbbb-dlrty
Build number : WMT2.1.2_88
So I have the huawei dongle model E1552 and i want to try it.... How can install the driver to use the dongle"?
I have a iconiaa200 nvidia tegra 2 dualcore and 1gb ram and i need to install windows or run windows game because i have an pc but i can use only at night and the day i have to be with my iconia. I play a game its call metin2 is not a very requirements games only a pentium3 nedded. Is there a way i can play that game on my iconia? Sry for bad english but i hopr you understand. And i have a adapter usb than i can put 2 usb. Mouse and keyboars i have the two.
View 6 Replies View Relatedwanted to know if its possible to add android on a windows 8 tablet, i am getting offered the tf600 instead of the tf201 ?
View 1 Replies View RelatedI cannot get windows to install the SDK drivers instead of its preloaded disk drivers. I have tried to do a manual update from the device manager, but windows believes it knows better and says the best drivers are already installed. I also tried to shut of the automatic driver installation through the system settings but it still installs its own drivers. This is getting extremely frustrating, when i run adb it says that there is no device connected.
View 3 Replies View RelatedWe can setup a vnc software or use remote desktop in windows 8 to access it on any android tablet with a vnc software.I have installed windows 8 on my pc and I do not have a touchscreen.I have a 10.1 inch android tablet. I have setup remote desktop on windows 8 and can access my pc's display on my tablet. But it can be used only with the mouse pointer given on screen. When I try to slide my finger on the screen for example, to navigate in the new start screen, instead of scrolling, the display of the screen moves and the blank space appears. This is because the vnc app is designed to work with a pc os that requires mouse.
But since this is windows 8, optimised for touchscreens, I want to use my tablet as the touchscreen monitor for windows 8 to use it as a tablet. I will keep my pc on and access it o n my tablet. Is this possible? Does vnc software for android that supports touch input for windows 8.
Can I install windows 7 on my samsung galaxy note 10.1 (gt-8010)?
View 1 Replies View RelatedI is it possible to instal Windows mobile on an Android Tablet with ARM procesoor ?
View 3 Replies View RelatedFor some reason my windows 7 64 don't recognize the driver r3. Does anybody have this problem?
View 5 Replies View RelatedI have implemented a simple Android application that I now would like to test on a real device. I have a Nexus One. In the Android Eclipse plugin, I have downloaded and installed the USB driver (revision 3) package. But when I connect my Nexus One to my PC (running Windows 7) using the USB cable, a message box pops up and shows that "No driver found" for "Nexus One". I have activated USB Debugging on my device. And when I run adb devices on my PC, it just prints List of devices attached and no devices are listed. And if I use Device Manages in Windows, and tries to update the driver for "Nexus One", I can not select a driver in the "driver directory" of Android SDK. How can I install a driver for Nexus One on Windows 7 so I can use it for USB debugging my Android applications on a real device?
View 3 Replies View RelatedUnlike some others, my Android SDK setup went smoothly on my new Windows 7 Pro 64 bit machine. However, I am currently hung up on installing the android usb drivers. What is the current state of this issue? There has been some discussion of this problem on the web but no consensus is immediately apparent.
View 2 Replies View RelatedI cannot find it anywhere.can anyone shed some light on where i can get a driver for windows 7 so i can root my behold 2?
View 1 Replies View RelatedAt the Google Android Developer Lab event today I had the opportunity to try out a series of devices but was somewhat limited due to issues I had with the USB drivers for the XP/SP2 notebook I brought along. (Yeah I know) In the past, I've had no problem with the G1 or Google Ion, but the Motorola DROID, HTC Hero, Tattoo and a few others did not work, i.e. were not, or only partially visible. Before you ask, this problem persisted after updating the XP USB drivers to the latest _r2.
Has anybody successfully connected devices outside of the G1 and Google Ion on XP? Any tips?
After having been one of the more vocal complainers about the lack of devices available for developers, I've followed the moral imperative once this opportunity was provided by Google. Big thanks to the team at Google for filling this gap.
I've been using my G1 under Windows 7 64-bit and Eclipse just fine.
However, when using my new Nexus One instead - and making sure that 'Use Debugging' is enabled - the Nexus One is not recognized and debugging on this phone is not possible.
Usig the Nexus One as a removable-drive (by mounting it) works fine.
How can I start using the Nexus one as a development device (on Eclipse)?
I have a new Captivate and am attempting to establish a USB connection with Windows XP sp2.
I have downloaded setup two different USB drivers, (1) from Samsung--I assume it's the official driver, and (2) from the Android SDK. Both installations ran without error. But when I attempt to install either driver, Windows complains that it cannot locate the driver. I'm at a loss.
Windows is finds the Captivate when connected but only intermittently. Sometimes it identifies it and sometimes it doesn't.
Is anywhere a custom ROM to the new Ampe A85 with the new A31S chip? I received my tablet and wants to root and customize it.
View 5 Replies View RelatedI know that Google elected Windows XP (eXtra Problems) to be the minimum operating system, but was anyone here able to run it on win2k? Being able to run the emulator OR install the native driver (to debug in the device) would be enough. I really would not like to have to buy a new computer just because of android. Since I already work with many other platforms without problems.
View 11 Replies View RelatedI have bought Ampe A10 i try to root it. I have run LiveSuit and try more of ***.img files. Everytime it stops at 3%. Well i was a little bit nervous soo i add (probably) not good firmware (it was SANEI_N90_0208(2012-08-27) ->0208.img) And it has upgraded. But now i have a problem. When i turn ON tablet it just flickers 3-4 times i see desktop like this:
And thats all. I can't do anything more. If i hard reset tablet than try to press Vol + or - and try to run again LiveSuit - it doesnt go.Buttons don't work and it stops here everyhing.
Can you please advise if development tools Eclipse, Android sdk, usb driver etc. are working properly under Windows 7 32 and 64 bit?
View 10 Replies View RelatedUntil now, have been using Android SDKs Emulator with the Eclipse plug-in, but recently replaced my non-Android phone to T-Mobile's MyTouch 3G Slide. Today, tried to install the Windows Android USB Driver for the phone. Followed instructions in http://d.android.com/sdk/win-usb.html (USB Driver for Windows Android Developers).
When looking for the driver, Windows gave me a "Could Not Find Driver Software" message. When telling Windows where to search, I pointed it to the SDK directory where the driver resides (¦Android-SDK-windows/ usb_driver). Also tried ¦Android-SDK-windows. Specified use sub- folders" in both tries. I am using Vista 64 bit, and suspect that may be the cause.
The "could not find.." message box from Windows has this information under Details:
Problem Event Name: PnPDriverNotFound Architecture: x64 Hardware Id: USBVID_0BB4&PID_0E03&REV_0100&MI_01 OS Version: 6.0.6002.2.2.0.256.1 Locale ID: 1033
In Windows Device Manager, "Other Devices ==>ADB==> Properties" shows Device type: Other Devices Manufacturer: Unknown Location: 0000.001d.0007.002.000.000.000.000.000 Device Status: This device is not configured correctly. (Code 1). There is no driver selected for the device information set or element
In the sdk's "usb_driver" directory, the "android_winusb.inf" file has several VID's beginning with 0BB..., but does not have one for the one listed above. Nor is there a [ ... ]header entry for the MyTouch 3G Slide (Expresso?)
I suspect this is the reason for the "Driver not found"
Am using the 32 bit version of "Eclipse IDE for Java Developers" downloaded last April. (At that time there were a lot of forum warnings about not using the 64 bit version.)
Today, before trying to install the driver, I uninstalled the Android plug-in from Eclipse and then uninstalled the Android SDK I had installed in April which was at the 2.1 level. I reinstalled the SDK at the 2.2 level taking "all items". Then reinstalled the Eclipse plug- in.
In the "Android SDK and AVD Manager" checked for any updates. There were none (I'd just re-installed, so that makes sense)
Information in this thread looked like a solution:
[url]
When I tried that, got the same message box.
These two threads from 2009 have entries that say the 64 bit driver is in the SDK I cant find it. Could be looking the wrong place though.
[url]
[url]
The android_winusb.inf has these two .CAT entries in it CatalogFile.NTx86 = androidwinusb86.cat CatalogFile.NTamd64 = androidwinusba64.cat
Using the information from the above ¦5512 thread, I added these lines to the [Google.NTx86] group immediately following the ";Google NexusOne" information and before the [Google.NTamd64] entry
CODE:.................................
When that did not make any difference, added: %SingleBootLoaderInterface% = USB_Install, USBVID_0BB4&PID_0FFF which was also part of a post. Made no difference
The .INF has a [ClassInstall32], entry, but there is no [ClassInstall64] entry. I do not know enough about INFs to know if that is needed or not.
I plan on buying a car in a few months, and I have this grand dream of replacing the radio/nav stuff with a connected Android tablet, probably the Tab 7.0+ on TMo. I'd have Google Maps and all my music with Google's Car Home interface resting right in the dash.
View 8 Replies View RelatedI bought my children each a Samsung Tab 3 7". I have almost finished setting up the first one and I'm wondering if there is a way to "save" or "back-up" that set up and apply it to the second device so they look identical (same apps installed, same folder set-up, same settings, etc)???
Its taken me hours already with the first so I'd like to hear any shortcuts to setting up the second one quickly.
How do I get a rooted rom on to a device for flashing of windows
View 3 Replies View Related