I am using htc hd2 and wana play shadowgun on it. I downloaded its non tegra version..The game launches fine but it crashes back to home screen after the intro..So i downloaded chainfire pro .. but when click on install driver . The msg appeared dat " need 1022987 more bytes"..But i had 190 free ram ... 45 mb free phone storage and 4gb free on sd card..
View 6 Replies
Got a U9510, D Quad (unlocked and unbranded outright) (didn't see my phone listed so posting in this section)
Worked great, rooted easily. Installed Chainfire 3D, was all fine. Uninstall as decided I dont need it.
Then stupidly decided to try reinstall and try Beta EGL driver after browsing and finding some EGL level support.
Now the screen is blank, no lights, no boot logo, nothing, and I want to cry. (Though I have not been able to pull the battery)
Plug in via USB still shows up as Android device etc.
I dont know how to pull the battery on this phone, it's not easily accessible, I took the screws out of the back plate and tried to lift up the plate but couldn't see how to do it, so just put the screws back in.
Also it's new, so no SD card yet, internal only.
USB Setting is default to storage device, but internal doesn't show up on that setting, it does on MTP.
What steps to recovery?
Most similar issue I've found is this, but only seems like the same symptoms, not same cause: [URL]....
No mention of EGL, and I had no problems with Chainfire until I tried EGL.
Anyway to uninstall the driver over USB? And how to get the backplate off without damage to pull the battery?
I don't have anything critical on the phone storage I can't replace easily, have flashed roms before etc, but prefer to recover/undo if possible. And again with the storage issue, how would I gain access to the internal storage without the screen on?
edit: The removable disk drive shows up for the SD card (but obviously inaccessible since no microSD in phone), but I'm poor till wednesday night, so cant go out and get a microSD to attempt a fix yet.
HiSuite can't connect to the phone (HiSuite USB mode needs to be turned on OR USB debugging, debugging is) so I presume the phone is not in a fully powered on state running the OS (unable to start graphics driver etc).
edit2: The manual states if I want to change the battery to contact an authorised service provider (!), but can hold the power button for more than 10 seconds to force a restart (but I wonder if that will work in its current state?)
I'm following the directions found here to root my EVO, but whenever I try to install the HBOOT USB drivers, I get an error: "The system cannot find the file specified."
I'm running Windows 7 32 bit on an AMD processor.
I'm not sure if this is considered a boot loop but when turned on, after the logo it turns into a blank screen.
Anyway, I was stupid enough to install 3D chainfire when it's not compatible (I neglected the description since it worked on my previous galaxy ace) ...
I've tried going to recovery mode to:
- wipe data/factory reset
- wipe cache partition (but shows error)
Not sure what else can I do anymore. Since Ace 3 is fairly new, it's quite hard to find a solution with google.. Also, I have zero knowledge about flashing ROM or of the sort..
Extra info:
- My phone is Samsung Galaxy Ace 3 GT - S7275R
- Rooted with a Chinese universal rooting program
- When entering recovery mode, it shows "no command" for a few seconds before entering the menu.
I recently installed XtrSense ROM on my wifes Eris, and now she came to me today saying that she is getting "Low on space" errors, sure enough I checked, she only has 14mb on internal memory. I checked the amount of apps she has, and it wasn't much more then I had the phone when it was stock, she has like 20 apps in there, and when I had the phone on Stock, I had 30 apps and 100+mb free. So, is it the ROM that is taking up all the space? or the Nandroid backup? If I enabled Apps2SD will that move all apps to the sd card?
View 9 Replies View RelatedIn case anyone else is having problems getting their Incredible to connect, the easiest way I found to install the USB drivers are with the HTC sync program here:
http://member.america.htc.com/download/Driver/DROID_INCREDIBLE_Verizon/HTC_Sync_2.0.33.exe
The google SDK driver doesn't yet work with the Incredible, and though it can be hacked - this download might be easier for some.
As you know usb drivers are required by every activities. But Videocon A15 & some other mobiles have not official drivers. So how can I install usb driver for those mobiles?
View 2 Replies View RelatedVideocon A15 little RAM makes trouble for me. So I want to root my phone to use it in a better way, but I have tired by finding usb driver for videocon a15. But I can't find any usb driver. So I want to know how do I install usb driver for this handset?
View 9 Replies View RelatedMicromax does not provide any drivers for its phone - Micromax ninja a89. We are trying to use the phone for development and are unable to install device driver in windows 8.
We tried the adb drivers at - [URL] and got the error - Windows found driver software for your device but encountered an error when trying to install it. Android ADB INterface- The system cannot find the file specified.
We even tried this link - [URL] But that does not solve the problem. How do we install adb driver for micromax a89? Is there any other workaround to use the phone as a development device?
I Have a Nexus 7 and recently I found that I needed to use ADB for something and I had used my Nexus 7 with ADB on this computer before (thats how I installed KitKat) but whenever I connect my Nexus now it says that is not configured correctly and when I attempted to install the ADB driver it said windows encountered an error. I am currently running windows with Driver verification disabled and on test mode. I am also running windows in test mode so that it wouldn't block the driver. I have tried every driver possible from the one in the SDK to the intel android adb driver and even PDAnet. I have checked inside the driver file that it is properly registered for my nexus 7. I am running Windows 8.1 on my computer and android 4.4.2 kitkat on my Nexus 7.
View 1 Replies View Relatedit's almost 2-3 hours that i'm stuck with instaling drivers on pc for my Prestigio Multipad PMP5097CPRO. I wanna root it, but I need first to install drivers propery to debug via USB.
Root with "ICS Root Unlocker"
I used that guide sendspace.com/file/4dwex1
tried with different versions of Rockusb, but still the same. (unable to install drivers) .I even tried different usb cable/port/ and pc, but no work (win7 64bit)
ADB driver don't work too. I've read this thread but find nothing similar http:/[url]....
I want to connect my CS-918 Android TV Box to my Pc.I have Win 7 64Bit. I download the Rockusb_v3.5 drivers, in the device i set the USB Debug mode, When i connect the USB cable, In the Windows Device Maneger it recognize as CS918. I tried another cable and the same....Then i click 'Update Driver' select the path of the 'Rockusb' but it does not installing it.
View 3 Replies View RelatedI'm about to flash my B92M (SIII Clone) MT6577 but I need to make sure that I have everything set up. This is my first time flashing a phone and I don't want to mess it up.
So basically I'm having trouble installing the MediaTek DA USB VCOM Driver and I'm not even sure if I'm trying to install the right one. How do I go about installing this? And download link for one that supports MT6577 or does the MT6575 one work with it?
I have a generic tablet
Memory size : 256
Model number : generic
Firmware version 1.6
Kernel version: 2.6.29-00236g4f8dbbb-dlrty
Build number : WMT2.1.2_88
So I have the huawei dongle model E1552 and i want to try it.... How can install the driver to use the dongle"?
Recently I uninstalled PowerAmp. However, when I tried to reinstall an upgraded version of it, I can't as the installer came out with the out of space error. However, the problem is that I have enough space in my phone. (Confirm have space one). I also tried installing different versions of the apk but it still doesn't work. Other bigger apps apk work fine except all the different version of PowerAmp.
View 9 Replies View RelatedRunning a Transformer T300/ICS - Getting an out of space error message when attempting to re-install a single app (Directly from apk) getting an error message that there is not enough space to install (20+gigs free).
View 1 Replies View RelatedI have set the install location of my phone to external. Even though I am installing apps to ad directly, I can't install apps higher than the internal free space left.
View 3 Replies View RelatedI have an eMoto, with Android 4.1.1 Jellybean.
I can download any app under 10mb, but anything over 10mb such as Facebook, gives me this error. I have enough space on my SD card and internal memory. Considering I can download any app under 10mb just fine. I have tried tons of apps and games over 10mb and none work, ONLY ones under 10mb.
Is there a way to update android on my phone, which could possibly eliminate this issue? Because I didn't have this problem on 4.0.1 (Ice Cream Sandwich) on another phone.
When tryign to extract the hboot drivers from unrevoked, i get an error stating that an unexpected error is prventing me from copying the file. the files that wont copy are:
View 1 Replies View RelatedI want to install usb driver on my windws xp to debug on my HTC Magic phone, I follow steps here: http://developer.android.com/guide/developing/device.html But I find that when I plugin the connecting cable to my phone, windows xp just treat it as a storage device. There is no "New hardware wizard" pops up. How can I do to install usb driver?
View 7 Replies View RelatedDoes anyone know how to install the usb driver for the HTC magic? Whenever I plug in the phone and select to mount is as a mass storage device, it gets mounted, but no "New Hardware" wizzard appears. I've enabled USB debugging in the settings.
View 24 Replies View RelatedI have Windows 7, and when installing HTC Sync it fails to install a driver for my Magic. Has anyone here with Windows Vista successfully installed HTC Driver? It should be placed in C:Program FilesHTCHTC Driver. Can anyone tell me what that folder contains?
View 1 Replies View RelatedI know ADB was working before I updated to 2.1 root. Looking at the USB devices the current driver isn't compatible with the phone now. Is there a change I need to make to get the USB driver to work? Yes I have USB debugging on.
View 4 Replies View RelatedEvery time without fail when I try to install the adb driver I get a fatal error message. I have USB debugging selected, tried to mount in flash mode, uninstalled and reinstalled and every time I get a fatal error. I would like to install custom apps but w/o the adb driver... no luck. Any solutions? I have scoured the net and have not found a applicable solution. Using XP 32 sp3 and if there is any other info needed about my g1 or op sys, just let me know.
View 2 Replies View RelatedI have implemented a simple Android application that I now would like to test on a real device. I have a Nexus One. In the Android Eclipse plugin, I have downloaded and installed the USB driver (revision 3) package. But when I connect my Nexus One to my PC (running Windows 7) using the USB cable, a message box pops up and shows that "No driver found" for "Nexus One". I have activated USB Debugging on my device. And when I run adb devices on my PC, it just prints List of devices attached and no devices are listed. And if I use Device Manages in Windows, and tries to update the driver for "Nexus One", I can not select a driver in the "driver directory" of Android SDK. How can I install a driver for Nexus One on Windows 7 so I can use it for USB debugging my Android applications on a real device?
View 3 Replies View RelatedUnlike some others, my Android SDK setup went smoothly on my new Windows 7 Pro 64 bit machine. However, I am currently hung up on installing the android usb drivers. What is the current state of this issue? There has been some discussion of this problem on the web but no consensus is immediately apparent.
View 2 Replies View RelatedBack when trying to in stall the adb driver for my droid eris. i put the phone in debugging, then i installed the sdk, downloaded the driver, told the install hardware prompt the path to the driver and it still wont install it. i am using the leaked non rooted firmware version 2.1.
View 7 Replies View RelatedI can't connect my samsung galaxy S to my PC. Always fails when it installs MTP driver, and the driver from the CD doesn't work either. googled it and found it was a common problem, but I didn't find any solution. Is there any standard solution for this?
View 3 Replies View RelatedWhen i try and root my Hero my computer is unable to install the ADB driver needed to perform these tasks. I've followed the instructions from this website with no luck. Any ideas?? I'm running w7, dont know if that has anything to do with it.
View 1 Replies View RelatedI just bought a Captivate today and was all excited to fill it with my music and photos and whatnot, but then when I plugged it in I couldn't see anything in My Computer! Is there some sort of driver or client I'm supposed to install? I looked through the manual but didn't find anything that would help me.
View 8 Replies View Related