I have a sanei N83 fashion (if i'm right)
With android 4.0.4, 51 ram, cpu 1ghz A13, ...
I have the Windows 8 interface and i don't like it, the tablette seems too realy slow (when i want to enter my credential for facebook, in candy crush, the tavlette always crash, ...)
so i want a custom firmware lighter, faster and without the Windows 8 interface.
View 2 Replies
I am currently trying to flash my new Sanei n10 tablet with CM10 and it is proving much more difficult than I first imagined.
My main problem seems to be that the device just does not want to boot in CWM. I have installed the latest version of CWM (found here) via the Terminal Emulator but it doesn't boot into CWM Recovery, but rather just boots normally. I have also tried using the hard keys to boot into it but all that does is boot me into the default android system recovery (3e) which is useless as it will only update from verified roms.
The device is rooted and I have ROM Manager installed. I have given Terminal Emulator superuser permissions... It just doesn't seem to want to boot into CWM Recovery. I have tried using both ROM Manager as well as NOVO7 Tools to boot into it but I get the same results (device just reboots normally)
I think that it might be something to do with the stock ICS 4.0.4 that came with the device.that is causing me so much hastle.
i have a chinese tablet (Teclast P98HD A2Q6) with some very good specs it has 4.1.1 but it's laggy there's another tablet called (PIPO M6) with the same processor and display & it has 4.2.2 with the latest SDK for the chip.can i upgrade my tablet with PIPO's firmware ?
View 9 Replies View RelatedI is it possible to instal Windows mobile on an Android Tablet with ARM procesoor ?
View 3 Replies View RelatedHow to root tablets with this processor.
View 1 Replies View RelatedI can TRICK DROID ROM (linked below) to update my HTC ONE S as i m on OPTUS Network and i really hate that ROM so really want to change that ROM, I have already ROOTED my device
View 1 Replies View RelatedMy tablet is a JXD P300 with Android 4.0.4. Tetando set the external SD card as internal SD did some wrong procedure even went to settings and turned off the internal SD card. And now the tablet is stopped on the first home screen. Looking for firmware for it?
View 2 Replies View RelatedHow to extract a firmware from a tablet?
View 2 Replies View RelatedHere's my situation. I have 5 tablets and all being Acer A200's. One of them works fine, but the other four are stuck on the acer logo.
There is NO support for these tablets anymore, no honeycomb roms available to download, etc.
Is there any way that I can basically copy the whole rom/bootloader that's on the working A200, and put it on all the other tablets?
Dopo TD-1010 http:[url]....
I really need to find a stock firmware img for this tablet. I accidentally removed something from the system
I recently bought tablet Matrix d7030. where to download latest firmware for it or if I could use firmware of another device. how to root this specific tablet?
View 1 Replies View RelatedSpecs:
OS: Android 4.0
CPU: Boxchip A13 Cortex A8 1.2GHz Processor
RAM: 512MB DDR3
Files supported: Audio Support: MP3, WMA, OGG, APE, AAC, FLAC, WAV
Video Support: MPEG1/2/4, H.263/H.264, RMVB, RM, MOV, DAT, VOB, EMV/VC-1, MVC, AVS, MJPEG, AVI, ASF, TS
Picture Support: JPG, JPEG, GIF, BMP, PNG
Battery: 3.7V/1400mAh
Camera (Rear Facing)
I just got the v711s tablet directly from china and I tried to flash it with a new firmware but I didn't took the good one. Now the touch screen doesn't work and I'm unable to reflash it to an other firmware.Also the boot manager is not responsive so no chance on this side (also I don't have volume button on the tablet).
What should be my next step? Is a hard reset via SD card available ? Is there a way to get boot manager working ?
i got an bootloop at my Presitigo PMP5580C (same as Intenso TAB 814). The recovery mode (Power + vol+) wont work.
How to flash the firmware to the tablet?
I installed Android SDK and the Drivers. But what to do now? What Software did i have to use to flash und what file (Firmware) to flash?
I have bought a GADMEI E8HD Tablet from efox. Its a great Tablet, uses 0912 as Firmware and it runs fine!
And then, Firmware 1011 is coming out. OK, no Problem. Flashed it and then: DEAD.
Nothing. It stays Black, doesnt do anything, even on USB.
I know from [URL] .... and [URL] .....
I know about the firmwares like - ICS , Gingerbread or JellyBean
But What is Custom ROM Firmware
Is there any word when a method to root and install custom firmwares on the Arc (such like Cyagonmod or something)?
I've tried just about most of the common methods I've found so far, and I've gotten nothing.
The only thing I can think of is the fact that the Arc is suspiciously similar to the Nexus 7, so can look into root and see if a port can be made for the Arc.
I currently own a Samsung galaxy s2, which is still in warranty.
I was wondering if after i flash it with a custom ROM of ICS, i was thinking about sticking on Resurrection Remix ics v1.0 PRO.
If it were possible to literally put the stock operating system back onto it, potentially reapplying my warranty?
Link to any custom or stock firmware for this tablet?
I have a small annoying issue that I am sure could be fixed with a flash, the back button randomly stops working until I reboot.
The baby Einstein on their 800 number thought a factory reset would fix it, then that using the software button was a good enough solution and had no clue about tablets in general. Through Support e-mail they were heading towards wanting me to ship the tablet back rather than supply a link to firmware. I explained to them it doesn't appear to be hardware related as it is random, and reboot fixes it.
I have a generic Chinese 9.7inch tab, that looks almost identical to a Ipad1.
It is very similar to this: Enjoy Tab T91 Although its on Andorid 3 i think.
I am wanting to install Cyanogenmod, or android 4.
how i will find the correct Rooting and rom?
I just purchased a cheap 9.7" Android Tablet, Model AM09-D2. It came with ICS 4.0.4, has 16Gb ram and a dual core Cortex A9 CPU. I would like to know how I go about backing this thing up. It is rooted and has absolutely no blootwear installed. Is it possible to flash a custom recovery. Like TWRP or CWM to save a image of the rom. I have already did a data and app backup with Mybackup Pro. Now I would like to backup the Rom and maybe do dump. Is it possible and if so how? Not really that comfortable with ADB/fastboot, truthfully I don't understand what the difference is. I already have drivers setup for Samsung Galaxy Nexus on my Win 8 notebook. Will installing ADB/fastboot screw things up?
View 1 Replies View RelatedMost of the tablets with android 3+ have this large black bar at the bottom. I'm not sure how it is called but I mean this bar where the clock, back and home button and the notification icons are on.
On the middle area of this bar there is always much space depending on the number of notifications on the right.
My idea was to use this space for shortcuts to apps or tasker tasks. Just like in windows the Quick Launch Toolbar on the task bar.
But until now I haven't found any solution.
Here is what I have:
I'm using tasker scenes to build my own shortcut buttons. Then I displayed these buttons as always on top and half transparent directly on the screen in the normal application display area. It seems that tasker is not able to display these buttons over the system bar. So this isn't a complete solution of my problem since the free display space on the bar is still not in use.
On the other hand I do know that it must be possible to program apps which are overlayed on the system bar since other apps can be placed over it.
Anyway... I'm searching for a clean solution to get shortcuts on the system bar to start apps or tasker tasks with one click or touch.
I have an Android tablet from Sanei Brand, model: N10.
for 2 weeks my tablet is "Dead" the only thing i can see in the screen is the battery charging (only when connected to power/pc)
rest of the time it is not starting and not responding to any button press.
how to do unlock the bootloader Sanei N77 Tablet PC (Andoid 4.0.3)? Is there a universal unlock software?
View 1 Replies View Relatedhow to resize the system partition on my Sanei N10. I have read quite a fair bit but i am to unsure how to do it. I have downloaded so far livesuit but unfortunately there is only chinese on the Sanei homepage. As much as i understand i need some file from them.So far i have stock rom and the device is rooted.
View 2 Replies View RelatedI was following this guide to upgrade my Sanei n10: [URL] In recovery mode I have installed the rom.zip, but after I pressed the wrong button and it turned off. Now, when I turn it on, leave the writing sanei and after few second remains on black screen.
If I try to entry in recovery mode with the vol+ button, it remains with the Android robot lying down with a red tiangolo, with no options.
What can I do to recover my tablet?
I've heard that theae 2 processers are very similar but obviously there must be a few differences. Does anyone know where I can find a comparison between the 2 or can someone compare them for me here?I'm just curious really. Both are really good I hear.
View 16 Replies View RelatedMy sanei n10 3G/GPS/dual core version is bricked or dead.
I press power button and doesn't do nothing, no vibrate, no light in the led, no video in the screen... only when i connect the tablet in the pc, recognizes it as device usb qualcomm.
I press (vol - & power button) and nothing.
I press (vol + & power button) and nothing.
I press (vol - & vol + & power button) and nothing.
I press (power button & reset) and nothing.
I press (vol - & reset) and nothing.
I press (vol + & reset) and nothing.
I press (vol - & power button & reset) and nothing.
I press (vol+ & power button & reset) and nothing.
I press (vol - & vol + & power button & reset) and nothing.
The pc always recognizes the tablet as device usb qualcomm.
I've tried to use odin3 and livesuit, but nothing.
if i rooted my hero, do i have to install a custom firmware? really all i want is wifi tethering and maybe apps2sd, do i have to install a custom firmware to do these or can i just use a stock one?
View 8 Replies View Relatedmight be a dumb question, but I don't wanna do the fw update on my fresh 2.1.2 hero, if it's going to break root. I'm guessing not but want to be sure.
View 7 Replies View Related