Specs:
OS: Android 4.0
CPU: Boxchip A13 Cortex A8 1.2GHz Processor
RAM: 512MB DDR3
Files supported: Audio Support: MP3, WMA, OGG, APE, AAC, FLAC, WAV
Video Support: MPEG1/2/4, H.263/H.264, RMVB, RM, MOV, DAT, VOB, EMV/VC-1, MVC, AVS, MJPEG, AVI, ASF, TS
Picture Support: JPG, JPEG, GIF, BMP, PNG
Battery: 3.7V/1400mAh
Camera (Rear Facing)
View 1 Replies
I recently bought one of the HD-89 7 inch tablets that are available now. Nice thing is they also have a phone function.
They are MT6589 devices based on MTK8389 hardware. I was wondering if there is already a CWM Recovery available for these devices. Rooting was no problem.
Link to any custom or stock firmware for this tablet?
I have a small annoying issue that I am sure could be fixed with a flash, the back button randomly stops working until I reboot.
The baby Einstein on their 800 number thought a factory reset would fix it, then that using the software button was a good enough solution and had no clue about tablets in general. Through Support e-mail they were heading towards wanting me to ship the tablet back rather than supply a link to firmware. I explained to them it doesn't appear to be hardware related as it is random, and reboot fixes it.
find a custom ROM rooted how to root eKlasse 10.1 inch tablet running android 4.1.1 OS
View 3 Replies View Relatedi have here a 7'' tablet that i would like to insert in a acessorie in my car. the problem is that once inserted, i cannot seed the entire screen. i have to reduce the screen displayed in the tablet to match the accesorie size. is any app or mod to do it?
View 1 Replies View Relatedtrying to port cm10 to a china made 6" A13 Tablet, when flashing the rom
at start I get error status 0, fixed the problem with updater-script, now I have a error status 6
checked updater-script and build.prop, both EOL are Unix so I don't know where the problem is,
i have a chinese tablet (Teclast P98HD A2Q6) with some very good specs it has 4.1.1 but it's laggy there's another tablet called (PIPO M6) with the same processor and display & it has 4.2.2 with the latest SDK for the chip.can i upgrade my tablet with PIPO's firmware ?
View 9 Replies View RelatedMy tablet is a JXD P300 with Android 4.0.4. Tetando set the external SD card as internal SD did some wrong procedure even went to settings and turned off the internal SD card. And now the tablet is stopped on the first home screen. Looking for firmware for it?
View 2 Replies View RelatedHow to extract a firmware from a tablet?
View 2 Replies View RelatedHere's my situation. I have 5 tablets and all being Acer A200's. One of them works fine, but the other four are stuck on the acer logo.
There is NO support for these tablets anymore, no honeycomb roms available to download, etc.
Is there any way that I can basically copy the whole rom/bootloader that's on the working A200, and put it on all the other tablets?
Dopo TD-1010 http:[url]....
I really need to find a stock firmware img for this tablet. I accidentally removed something from the system
I recently bought tablet Matrix d7030. where to download latest firmware for it or if I could use firmware of another device. how to root this specific tablet?
View 1 Replies View RelatedI have a sanei N83 fashion (if i'm right)
With android 4.0.4, 51 ram, cpu 1ghz A13, ...
I have the Windows 8 interface and i don't like it, the tablette seems too realy slow (when i want to enter my credential for facebook, in candy crush, the tavlette always crash, ...)
so i want a custom firmware lighter, faster and without the Windows 8 interface.
I just got the v711s tablet directly from china and I tried to flash it with a new firmware but I didn't took the good one. Now the touch screen doesn't work and I'm unable to reflash it to an other firmware.Also the boot manager is not responsive so no chance on this side (also I don't have volume button on the tablet).
What should be my next step? Is a hard reset via SD card available ? Is there a way to get boot manager working ?
i got an bootloop at my Presitigo PMP5580C (same as Intenso TAB 814). The recovery mode (Power + vol+) wont work.
How to flash the firmware to the tablet?
I installed Android SDK and the Drivers. But what to do now? What Software did i have to use to flash und what file (Firmware) to flash?
I have bought a GADMEI E8HD Tablet from efox. Its a great Tablet, uses 0912 as Firmware and it runs fine!
And then, Firmware 1011 is coming out. OK, no Problem. Flashed it and then: DEAD.
Nothing. It stays Black, doesnt do anything, even on USB.
I know from [URL] .... and [URL] .....
I have a Trio Stealth H-10 (MST10-21) that has the android 4.1.1 version software. Two days ago after I had finished using the tablet, I shut the tablet off. Upon restarting the tablet it started very slowly and the first screen that came up was asking what Language I wanted. From then on it was setting up the tablet again just like the first time it was used. I reset all the info. When I went to the app store to re-download my apps, it would not down load anything. I restarted my tablet again and everything started all over. Every time I restart the tablet, everything has to be reloaded. It seems like it is doing a factory reset every time it shuts down.
View 3 Replies View RelatedI have a two month old trio stealth pro tablet, and I have been having issues with it. For some reason it freezes on start-up after the android logo. I have tried combinations of keys to try to get into a recovery mode, but have been unable to do so. I could try to get this tablet back on its feet. I have looked at getting a different ROM, however I do not know enough to feel comfortable taking the risk and possibly bricking my tablet. I wonder if I can use live suite if the android system itself is not fully loading. Every once in a while ( once every few days) I am able to get past the screen and am able to do stuff on the tablet, but then I get constant errors, for example Google maps has stopped responding, contacts has stopped responding, and other random programs.
View 2 Replies View RelatedI purchased a Trio Stealth Pro 7in Tablet with these specs
Dimensions- W7.5” x H4.8” x D0.4”
Operating System- Android™ 4.0 (Ice Cream Sandwich)
CPU – A10 Cortex A8 1.2 GHz
GPU – Dual Mali-400 2D/3D core
RAM – 512MB DDR3
Flash storage – 4GB Internal
Display – 7 inch TFT LCD
Native Resolution – 800X480 pix
Expansion – Micro SD card slot (up to 32GB), Mini HDMI Socket
Wireless LAN – Realtek 8188
Video Output – HDMI Ver 1.4 output
Native video support – AVI（H.264), DIVX, XVID, RM, RMVB, MKV, WMV (non encrypted), MP4（H.264, MPEG, DIVX, XVID), MPEG, MPG, FLV. HD 1080P max
Native Audio Support – MP3,WMA (non encrypted),MP2,OGG,M4A,MA4,FLAC,3GP,WAV
Battery – Li-Ion rechargeable, up to 6 hours playtime
In an attempt to root I have successfully installed and run cm10_a10_20120902.zip and gapps-ics-20120429-signed.zip. Each compatibility file I run errors out with the message 'E:signature verification failed'. Any comp file that might work with the cm and gapps files mentioned above?
I have Navon Platinum 10 and I bricked it.I can still upload firmware to the device via Livesuit.All I need is stock or custom firmware.Device is based on Allwinner A10.I tried many roms, but i couldn't find working ones. Best firmware i have found runs, but touchscreen and button's don't work.
View 1 Replies View RelatedMy tablet had 1mobilemarket installed instead of play store, but since I believe play store is better and I wish to have my gmail linked with my devices, I tried to install it. However, it won't work. I can download and install it just fine, but when I click on it I just get a white screen and it crashes.
View 16 Replies View RelatedI have a problem with my chinese generic tablet:
Model: Mahdi M6
Android: 4.0.3
Led: Blue[url]...
My girlfriend dropped a glass of soda on it, I could clean and dry all now works perfectly the screen, but the touch screen stopped walking.
I wanted to get into recovery mode (Vol Up + Power) but I get an android with a red triangle and did not display any options.Get the manufacturer to install ROM from SD but since I can not go into recovery mode I find it impossible.Know it's a generic Chinese tablet but how I could do to get it working again.
Trying to figure out how to get a working Android tablet to play in my car's USB port. Apparently the SGS3 Easy UMS app works, where you are able to play music through the car using that app, as it has a sim card slot to fix the issue where usually the car will say device not supported, as is my issue with the Nexus 4.
I was trying to get a Nexus 7 tablet installed in my car, without redoing all the stereos etc. to get USB sound, but it seems that may be the only way to go. I really want a USB connection, and not Bluetooth / Aux, as the sound quality is inferior...
Car: Chevy Cruze 2012 Tablet of choice: Nexus 7, but may go with a Galaxy Tab, if I'd be able to use USB that way.
I bought a Galaxy Note GT-N7000 in Indonesia. (PDA: N7000DXLC2, PHONE: N7000DXLC1, CSC: N7000OLBLC2). The installed languages are asian languages (+English), so I would like to change the firmware to a European version, since I would like to have Hungarian language on the phone (especially but not only because I would like to be able to type messages with Swype). My plan is to change to this one: N7000XXLA6, N7000OXXLA1
The question: The new firmware belongs to a different location than the old one.
I cant turn my tablet off or get it to work it is stuck on the screen saver,what do I do
View 7 Replies View RelatedI've The Tab "BSNL Penta IS701c". Which Is Rooted Also & Having No Problems.... But Some Apps Like Webroot Security,Kasper key Security ,Sketchbook Pro v2.5.1(Specially)
I've Got Following details Like
"BSNL Penta IS701c"
Screen Resolution......800*480
But Showing 800*455 In Benchmark(maybe cause of status bar Which Get 25 pix hight)
So I cant open These Apps.......(maybe Other Problem)
I have Tablet PC Q8 model gs701b. Firstly it worked properly but i decided to change rom. After i install new rom Front camera stopped to respond. Tablet didn't recognize it. (It thinks that front camera doesn't exist :X ) And the other problem is that rear camera doesn't work properly either. It shows show image such as in mirror :X I have tried to install on it many other roms Such as 1) TF-20121031-Q8-0329camera.zip (Doesn't work touchscreen) 2012092002_Q8_TF.zip (Doesn't work touchscreen). Q8-New-UPGRADE_FAST.zip- (Works) and Now I have OVO light Update 2 It works great but camera still doesn't work properly. :X what to do ?
View 3 Replies View RelatedI bought a tablet for my wife. Not the best thing out there but hey, she likes the solitaire on it. The amazon app store sucks. I want the "real" app store..... I've tried downloading a bunch of diff versions. But nothing wants to work. I got one to work, well, somewhat. It let access it and play around. It wouldn't let me d/l anything. Any good app is in the Google play store.
View 1 Replies View Relatedi tried to connect my wireless Xbox 360 Controller over an OTG-wire with my Lenovo s6000l Tablet. The lights on my controller and wireless adapter show me that my controller is connected, but my tablet show me no reactions. The App BT/USB Joystick Center does not find the controller. I tried to download the Vendor files from another thread in this Forum and copied them on to my Device.
I even tried to connect my PSX-Controller (PS1) over an PSX to USB adapter with my device, but the buttuns had a bad configuration. The app Sixaxis Compatibility Checkers tells me that my controller is found when i click on Start but when i press Pair Controllers it says that he couldnt find any controller and i should connect one through USB.
I have bought an Acme TB04 tablet and it does not originaly have the google play market, only the mobile 1 market, I have tried for the past 2 days to get google play to work, but I always get a message that google play has stopped when i launch the app. I have updated the services and framework with no good results.
View 8 Replies View Related