how to resize the system partition on my Sanei N10. I have read quite a fair bit but i am to unsure how to do it. I have downloaded so far livesuit but unfortunately there is only chinese on the Sanei homepage. As much as i understand i need some file from them.So far i have stock rom and the device is rooted.
View 2 Replies
I have rooted my xolo a500s IPS using farmaroot but when I tried to mount system r/w for pushing some apps and removing some on system partition but it is not mounting because of that i cant make changes on system.how can I mount system partition
View 9 Replies View RelatedWhat is the system partition for ics sense 4.0 for europian hd2? How long it takes for first boot.
View 2 Replies View RelatedIf my understanding is correct, tools such as CWM Installer and RecoverX are made so that users with locked bootloaders will have the privilege of using ClockWorkMod recovery. I myself used these tools. However, now that I have unlocked my bootloader, I want to remove the CWM they installed onto my system partition. I want to know where I can find it and how I can delete it? The reason why I want to get rid of such is because the kernel I'm using now already has CWM and I see no point in keeping a separate one stored on my system partition.
View 2 Replies View RelatedI am using HTC explorer and a few other android devices. The main problem I face while flashing new roms is the lack of space in System partition! Is there any way to decrease the space of /data and add it to /system? Then I can use int2ext or m2sd script to move /data to /sdext!
View 3 Replies View Related resize the system partition of an Android JB 4.2.2 on cubieboard?
Image: sun7i_android_sugar-cubieboard2-8192cu.img
I need more room (it's only 512MB) to install apps.
Well, the APP disk space (nand partition) is very small and the internal "sdcard" too big.
When I install a few applications the space runs out and the system becomes unstable.
I need to increase the nand and decrease internal sdcard to gain more room to my apps...
Well, I started the process by using the tools:
1) To unpack/repack: imgRePacker_204
2) The image ROM: sun7i_android_sugar-cubieboard2-8192cu.img (Android 4.2.2)
3) To burn to flash: PhoenixSuit1.0.6
unpacking the ROM creates a folder named sun7i_android_sugar-cubieboard2-8192cu.img.dump
So, somewhere in internet I see to change the sys_partition.fex file, and search the system nand partition:
Code:
;------------------------------>mmcblk0p8/nande
[partition]
name = data
size = 1048576
user_type = 0x2
so, I change 1048576 to 2097152 (2097152 * 1024 = 2GB)
but :
1) In installed android, the system has only 512MB and not 1GB as show.
2) By increasing this value, nothing happens when I repack back to IMG and flash to the nand.
(all unpak, change, pack, flash process is fine ! )
Here is my devices list and size:
Code:
NAME SIZE MOUNTPOINT LABEL
nand 3.8G
|-nand1 16M Volume
[Code] ......
I've tried to move Swiftkey 3 keyboard to the system partition with titanium backup pro but it keeps force closing, when I done this with Swiftkey X, it had worked perfectly without any force closing. My question is, Is there any way to move Swiftkey 3 keyboard to the system partition without any force closes? (Same with swype beta)
View 9 Replies View RelatedI was trying to expand my system partition size.
I flashed a zip via CWM on my phone, and must have made a mistake.
After i flash, my partition table seems to be messed up.
My "boot" partition is fine. All other partition seems to be "invalid" now.
I am able to enter fastboot, and "fastboot boot recovery.img" to enter recovery
I am not able to boot, or enter recovery mode directly.
I tried to "erase" via fastboot, but the partition is invalid.
i tried to "flash" via fastboot, but the partition is invalid.
Is there any way to "fix" my partitions?
I have downloaded a CM11.zip for my phone.
I have downloaded a stock rom for my phone.
I have access to these files, which are supposed to be system partition tables. found here:
github mirom/android_bootable_recovery/tree/cm-10.1/res/partition
HTC Desire Z (Vision). I S-OFFed how it's described on CM wiki. Latest radio. About month ago I installed CM 10.1 AlterNdromadus. It worked until yesterday, when it unfortunately installed some system update.
After that phone didn't booted anymore. In recovery it says, that it can't access system partition and formatting is not possible.
I tried connect the phone via fastboot in bootloader, but it also doesn't work. Under windows I have it as unknown device and when I tried manually install drivers from google, it says that they are not compatible with the HW (under ROM it worked before).
I tried also install stock RUU rom (extracted the zip and deleted H-BOOT, radio and recovery) from SD-card (PC10IMG.zip). But it also got frozen on system update.
Here you can see error from 4EXT recovery and CRC images from bootloader.
How can i permanently store custom ringtones on root/system partition? if i store custom ringtones on internal or external sd, profiles are messed up every time i connect my phone in mass storage mode.
View 1 Replies View Relatedis there is any way to resize the internal system partition. because I am trying to flash a new ROM. but my system partition size is only 450mb and I need around 1gb to flash the ROM. there are different partion like data partition, system partition, cache partition etc, can I resize them a make system partition of around 1gb. my phone karbonn titanium S1.
View 9 Replies View RelatedI am running rooted stock Android 2.3 on LG E405 (no working 4.x ROMs exist for the device)
I have two questions:
1) What is the shell command to manually make android allow the PC to mount androids' (internal) partition as USB-drive? (I cannot think of right keywords to google this one up - )
2) How does android determine which partition is which (i.e. which one to remount for the PC when connecting in "USB storage" mode), beside vold.fstab and init.rc? On android 2.3 that info is not in "framework-res.apk", so where is it? In the partition table itself?
I had switched data partition with internal sdcard partition.
Here's how: Phone had a very small "/data" partition on /dev/block/mmcblk0p21 and large internal "/sdcard" partition on mmcblk0p20
So I reformatted mmcblk0p20 (ex-sdcard partition) into EXT4 and mmcblk0p21 (ex-data partition) into FAT32
Then I changed init.rc to mount mmcblk0p20 as /data type EXT4 and mmcblk0p21 as /sdcard type VFAT (mounting /sdcard was commented out in stock init.rc for some reason). This required modifying my boot image.
I have also set correct partition number in vold.fstab:
[#]dev_mount sdcard /mnt/sdcard auto /devices/platform/msm_sdcc.3/mmc_host[/#]
So basicly I now have a large /data partition and small internal /sdcard. I'm able install up to a gigabyte of APKs and it works fine.
However, when I connect to my PC via USB into "USB Storage" mode, the phone seems to still try to unmount what was previously sdcard partition (/dev/block/mmcblk0p20), instead of what is NOW an sdcard partition (/dev/block/mmcblk0p21) I can still send files to the phone via wi-fi and ADB, but the ability to mount it directly would be nice.
If I accidentally select "erase internal sdcard" from storage menu, that will also most likely erase what is now my /data partition, softbricking the phone. The "factory reset" option will probably only corrupt the sdcard.
I'm have been trying to create a second partition on my sd card using miniTool Partition Wizard.But in the end I never get a 2nd partition but just a smaller first one.My approach is as follows:
insert empty SD card (FAT32, 4GB)
open miniTool Partition Wizard
right click on SD card - "Move/Resize"
choose 1gb for unallocated space after - click ok
right click on 2nd partition and choose "create"
create 2nd partition with FAT32/Ext2/Ext3 (tried all options already) and "primary" and Cluster 4KB - click ok
Apply
Afterwards my SD card is still shown as one partition, but this has just 1gb less capacity then before.Neither the Wizard nor the phone detects the 2nd partition then.
I can't figure what is exactly meaning the Partition Sdcard values in CWM.
I have an i9000, with 8Gb of flash. Some are system reserved. Available is around 6Gb.
When i run CWM, i can partition my sdcard, but i don't see what means the possible values (for 256 to 4096).
This is obviously not ruling the space left on /sdcard mountpoint (i partition to 2048, i still have nearly 6Gb available)... So what exactly means partition sdcard from CWM ??
i can't find an answer, and i dislike, when flashing rom, following commands i don't really master (generally a partition SD 2048 / SWAP 256 or SWAP 0).
I got a wierd problem with android emulator, I have created a virtual device through Android AVD manager (newly created emulator with platform 2.1 and api level 7), I have tried with standard settings and with added hardware parameter for larger (256 mb) device ram size but nothing changed.
I need to come files to the system partition to test a project (called haggle), but for some reason the system partition has no space from start.
aa a@aaa /home/haggle-0.2-android
$ adb -s emulator-5554 shell....................
I have an Android tablet from Sanei Brand, model: N10.
for 2 weeks my tablet is "Dead" the only thing i can see in the screen is the battery charging (only when connected to power/pc)
rest of the time it is not starting and not responding to any button press.
how to do unlock the bootloader Sanei N77 Tablet PC (Andoid 4.0.3)? Is there a universal unlock software?
View 1 Replies View RelatedI am currently trying to flash my new Sanei n10 tablet with CM10 and it is proving much more difficult than I first imagined.
My main problem seems to be that the device just does not want to boot in CWM. I have installed the latest version of CWM (found here) via the Terminal Emulator but it doesn't boot into CWM Recovery, but rather just boots normally. I have also tried using the hard keys to boot into it but all that does is boot me into the default android system recovery (3e) which is useless as it will only update from verified roms.
The device is rooted and I have ROM Manager installed. I have given Terminal Emulator superuser permissions... It just doesn't seem to want to boot into CWM Recovery. I have tried using both ROM Manager as well as NOVO7 Tools to boot into it but I get the same results (device just reboots normally)
I think that it might be something to do with the stock ICS 4.0.4 that came with the device.that is causing me so much hastle.
I was following this guide to upgrade my Sanei n10: [URL] In recovery mode I have installed the rom.zip, but after I pressed the wrong button and it turned off. Now, when I turn it on, leave the writing sanei and after few second remains on black screen.
If I try to entry in recovery mode with the vol+ button, it remains with the Android robot lying down with a red tiangolo, with no options.
What can I do to recover my tablet?
I have bought a cheap chinese phone that had a 4g rom. 512mb is mapped to data as p3 and p4 is mapped to internal storage which is 2g.
I have managed to work out how to delete partition4 and extend partition3 as they follow on from each other.
However how do I remove all links to it in the system as it still tries to mount it on boot even though it isn't there.
I have removed the line from vold.fstab and that just crashed the external and internal sdcards and the storage section inside the system settings.
I have a sanei N83 fashion (if i'm right)
With android 4.0.4, 51 ram, cpu 1ghz A13, ...
I have the Windows 8 interface and i don't like it, the tablette seems too realy slow (when i want to enter my credential for facebook, in candy crush, the tavlette always crash, ...)
so i want a custom firmware lighter, faster and without the Windows 8 interface.
My sanei n10 3G/GPS/dual core version is bricked or dead.
I press power button and doesn't do nothing, no vibrate, no light in the led, no video in the screen... only when i connect the tablet in the pc, recognizes it as device usb qualcomm.
I press (vol - & power button) and nothing.
I press (vol + & power button) and nothing.
I press (vol - & vol + & power button) and nothing.
I press (power button & reset) and nothing.
I press (vol - & reset) and nothing.
I press (vol + & reset) and nothing.
I press (vol - & power button & reset) and nothing.
I press (vol+ & power button & reset) and nothing.
I press (vol - & vol + & power button & reset) and nothing.
The pc always recognizes the tablet as device usb qualcomm.
I've tried to use odin3 and livesuit, but nothing.
I need to copy files to the system partition of the emulator. As it is read only by default, I use the command "adb remount" to have write permissions and I can then copy the files.
My problem is that when I close the emulator and that I restart it, the copied files were missing. It's very annoying because I must write file permissions that are read at startup of the emulator (platform.xml file in /system/etc/permissions)
I would like to port a ROM, but the resolution of the device is too large for my HDPI (480x800) phone (HTC Glacier). The resolution of the ROM I want to port is qHD (540x960) and is the HTC Sensation. I want to port is OrDroid. Is it just /system/framework, or both /system/framework and /system/app? I can easily port it, I just need it resized.
View 5 Replies View RelatedIs there any way to resize a widget more than aklowed? I have a 4x3 widget that can be resized to 4x2, but i want it in 4x1. I don't care if its layout messes up, so, is there any way, trough external apps, mods, or even code hacks to do that?
View 4 Replies View RelatedWhat will the cwm backup?
if I backup a system with locked bootloader,will the bootloader relock after I restore the system from an unlocked bootloader system?
Which content will cwm backup?(include kernel?)
If I wipe data/factory reset or format sdcard in Clockworkmod Recovery, will it delete the partition that I created on my SD card?
View 1 Replies View Relatedis it possible to use swap on a sd-ext partition? I started to use simple 2ext and I don't know if it's that possible.
View 1 Replies View RelatedAs the title says how do I partition O+8.31z
O+8.31z had a very small internal mem. as we know 165mb
I do got 4gb mem. and I would like to partition it to use as my internal memory. So I could download and install game or an app as I want.
I am trying to create an sd-ext partiton so I can move applications and backup to that partition on my 4GB external SD card.
I've got ROM Manager 4.8.0.8 but when I select Partiton SD card it reboots and tries to reformat but I don't see anything on the Card just a LOST.DIR folder. I can't read the system messages when in Recovery mode cos it all happens so fast.
I tried via ADB and booted into recovery and selected the option to partition manually but still nothing. I reformatted the card with FAT32. Nothing.