I was just trying to reset my phone with odin, and when it got to the step where it says "Do not turn off the target" Odin froze for a good 5-10 minutes. So I unplugged everything, and now the phone won't start.
View 1 Replies
Ive used two digital clock widgets but they both freeze the time and don't move sometimes. I'm looking for either a 1x2 or 1x4 that wont freeze.
View 7 Replies View Relatedwhat Odin is, and how I use it for the Captivate? I have a vague idea, but I'm not quite clear on a few things, and don't know where to get it, and how to use it. If I understand correctly, it flashes my phone to factory fresh using ROMs. If I'm right, then I can use it to restore my phone(ATT apps and all) if I need to send it in for repair at AT&T. Am I right?
View 18 Replies View RelatedJust like the title says, does anyone know of a version of Odin One-Click Restore that restores it to JH7 firmware instead of JF6?
View 1 Replies View RelatedI know, but is their any difference between these?
View 5 Replies View Relatedi put my phone into download mode, odin one-click was open already, press start then:
<ID:0/009> File analysis..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> Sbl.bin
<ID:0/009> boot.bin
<ID:0/009> cache.rfs
<ID:0/009> dbdata.rfs
<ID:0/009> factoryfs.rfs
And a green screen on my phone.
For anyone needing to flash back to stock while XDA site is down, I located a simple guide and a link to Odin 1 click. What's Odin?
View 7 Replies View RelatedI did it last night, seemed to work fine, but I noticed something today. Under settings, applications, USB settings, there is an option for PC Internet that wasnt there originally. When I try to go to software update, it says Communication Failed. Unable to connect to ATT servers.
Coincidence that this started now, or is there something wrong? I reset the phone twice, and reloaded Odin twice. Everything else seems to work fine.
i think my gt-i7500 is bricked. i downloaded the 1.6 firmware(.tar) along with ODIN.. set up the downloading mode and used ODIN to flash it to 1.6. ODIN showed PASS in the window but the phone refuses to boot up. It remains frozen with the SAMSUNG sign. Recovery mode is not working either.
View 6 Replies View RelatedToday, I made a call and the party on the other end was not answering. So, I tapped the red "end call" and nothing happened. There was not feedback from the phone at all. Other end kept ringing. No response anywhere on the phone. Soft keys would not respond--Nothing. Had to press power key and power off, then reboot.
View 2 Replies View RelatedI'm updating my moment to 2.1. i got the download, followed all instructions... my phone is sitting here connected with the "update in progress" yet... nothing is happening. it's sitting there. completely still.
View 3 Replies View RelatedI'm new to Android and want to update the firmware. I keep reading about this Odin and was just wondering what it is?
View 9 Replies View Relatedi cannot see here where to download odin?
View 1 Replies View RelatedFrom Where Can Download Odin?
View 3 Replies View RelatedIm new to Behold. I want to flash the 1.6 r7. I was wonder is there an backup utility I can use to save my current rom before odin so I can always revert back if need be.
View 2 Replies View Relatedin odin i got everything running fine then i power off my phone and enter download mode and then i press start in odin and it tells me to plugin phones!! so how do i plugin in my phone if it is already connected via usb? it even shows my device is plugged in when i first enter download mode but odin keeps saying plugin phone.
View 3 Replies View Related1. Open up Odin Multi Download
2. Under Select OPS, choose Behold2_partition.ops
3. Click PDA, choose the PDA File you are Trying to Flash Rather it Be BH_MAN Rom / or Stock
4. Power Off Phone
5. Make sure you have it connected via USB
6. Hold and Press Volume Down, OK, Power (the red end button)
7. Phone will say Download Mode
8. Click Start on Odin Multi Downloader.
9. Wait a couple of minutes
10. Stock Touchwiz phone working again!
So i downloaded Odin and "I7500XXII5-PDA-CL64494-REV5(VIA).tar" with the intention of overwting my providers startup ads and bloatware and saw in the instructions that I should delete the cache.img file in I7500XXII5-PDA-CL64494-REV5(VIA).tar. However when i did that and try to flash, odin reports: "Check image files!!"
View 19 Replies View RelatedI'm having a problem with my phone, I've had 2 lines show up at the top of my screen in the past couple of days. They're both multi-coloured and definitely look glitchy. They show up even in boot screens, fastboot, recovery, etc. I thought it might have been a problem with Galax0 that I was running, so I tried to re-flash it with Odin, and Odin seems to finish, but the phone does not actually get flashed. It stays at my previous firmware, with all apps installed, but when it reboots with Odin, the screen doesn't work (except in between the two lines at the top, so I can just see the bar at the top). I pull the battery and reboot, and it works, but is very glitchy.
View 4 Replies View RelatedWhere can I download Odin v3.98. Post a link please.
View 2 Replies View Relatedwhy is it that when i receive a phone call and i tried to answer the call by sliding the green arrow the phone freeze?
View 4 Replies View Relatedcoming from a first gen behold . Im happy to have upgrade to android .The only problem i have had so far is when i turned the phone off and try to restart it would freeze and have the android logo replay but never get to the home screen. Had to force recover mode 3 times. I'm guessing some app that force the phone to stay awake might be causing this . Can some please tell me if this is the cause or is there something else wrong with my phone.
View 8 Replies View RelatedAfter countless calls to t-mobile I have *FINALLY* received my update, which means now that I've got the updated kernel I'm ready to upgrade to BH_MAN's rom... But of course if something goes wrong I'd hate to ODIN back to a buggy system. So my question is this: can anyone instruct me on the process of creating a new ODIN file on a system with the updates? Because unless the process is way over my head I'd really love to give it a shot.
View 7 Replies View RelatedIs it possible to make a "backup" like the files that can be used to flash with Odin (phone, pda, bootloader and csc tar files)? That is, if I have a phone with some firmware I want to have in this format, how can I get it? I know about nandroid backup but that's a different format.
View 1 Replies View RelatedWhat is Odin? Is there a link to download it? How do I open it?
View 14 Replies View Relatedi need link for last 7500 firmware that i can use with odin and 100 % working
View 1 Replies View RelatedI have a question about the files being used to flash my Samsung Galaxy S2 via Odin.
I have already seen this link [URL]...
I am trying to flash the PDA, Phone and CSC back all to normal stock. I have downloaded a firmware and I only have one file with a .dll file. The one file I have is named "I9100BOKK1_I9100TMUKK1_I9100BOKJ1_HOME.tar.md 5" I have extracted the files from here also and it contains boot.bin, cache.img, factoryfs.img, hidden.img, modem.bin, param.lfs, Sbl.bin and zImage.
How with these files and Odin do I flash all three parts. I can't see how to use these files on the above link with instructions for flashing and rooting.
I have the Samsung Galaxy Tab 3, 7" (WIFI-ONLY).
Firstly, let's start by saying that I ended up rooting it after a while because it got boring having the simple, unmodified android.
It seems creativity got the best of me, and I ended up wanting to switch back to my normal android days. The problems started when I looked for the ways to upgrade my device, and it sais my device had been modified (rooted). So then I tried deleting SuperSU, thinking that would unroot, but nope... I then went to my great friend, we all know as Google. I then found the firmware, however didn't notice it said 3G, not just WIFI.... and loaded it onto my tablet following the instructions leading me to use Odin. I now have a Samsung Galaxy Tab 3 WIFI only, with 3G Firmware.
After countless hours, days, and now weeks of trying to get it back to the normal firmware, all my attempts result in an error on Odin, and here's what I get:
First, I just load the .md5 file, and this happens.
---
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T210XXAMK5_T210OLBAMK1_T210XXAMK5_HOME.tar.md5 is valid.
[Code] ....
Now, what do I do to get my precious tablet back to normal? , since I have the 3G version, I'm required to have a sim card which I can't put in because there's no sim card slot (it's a WIFI tab). I can't even use WiFi, because it won't turn on without a SimCard.
What will happen if I try to freeze TouchWiz using Titanium Backup?
I want to do it to save resources, but I feel like its going to really do something bad...not sure if anyone else has tried?
Anyone have their phone freeze to where they couldn't even lock the screen? The phone completely froze, so I went to pull the battery and the phone still stayted on, but frozen of course. I had it plugged in to a wall charger, so I don't know if it was still getting enough power to keep the screen lit.
View 1 Replies View Related