HTC Incredible :: Update Baseband Version
Aug 27, 2010
I'm currently running the CM6 rom on my DINC, and I guess I forgot to update my baseband version, which is preventing me from using WiFi, and my camcorder function. So I downloaded the baseband update.zip, and put it on the root of my microSD, formatted in fat32 btw. Hboot detects the update.zip, but for whatever reason can't install it. When I go into ClockworkMod Recovery, and choose the apply sdcard:update.zip option, after 'Writing RDL/BP image..." I get the error "E:Error in /sdcard/update.zip (status 0) Installation aborted".
View 4 Replies
Aug 4, 2010
I have a rooted Droid Incredible currently running froyo (2.2) with a sky raider 2.0 ROM. I have attempted to install the PB31IMG.zip then the update.zip onto a rooted incredible then installed the sky raider ROM. I did not realize that the PB31IMG.zip did not successfully install. From what I could tell it unzips it then says that it cannot find the images. After downloading it to my PC before putting on the root of the SD card it wont let me open it and says that it is corrupt and could not create the file. However I am able to unzip it from my PC running XP. Basically My issue is that the sky raider 2.0 ROM only works with the version2 baseband and I have baseband 1.x version and cannot seem to get it updated. It is causing the wireless tether to not work and the camcorder. Sorry If i have provided too much detail or confusing. I have also tried to unroot but since it wont open the PB31IMG.zip i am unable to downgrade.
View 1 Replies
View Related
Dec 1, 2010
is the 2.1 firmware version dj07 baseband version the latest update available for the samsung moment?
View 1 Replies
View Related
Nov 11, 2010
I was bored today and decided to do the updating through my phone (not through SE Update Service), unlike the previous 3 weeks, it finally shows there is an update for my phone. I was so excited and immediately hit ok and start downloading. It took total about 30 minutes to download and update the phone. Seems like a major update. I was so happy thinking this has got to be the Android 2.1 firmware update. After updating, the phone automatically restarted itself. Took about 1 minute to restart. Right away, I went to the setting - about phone to check the software version. It still shows Firmware 1.6. But the baseband version is now 1.1.27 instead of 1.1.16 before. What is this baseband version?
View 8 Replies
View Related
May 11, 2010
If you have received the 2.1 OTA from Verizon, can you tell us your baseband version, kernel, build #, and software #.
Just to compare those to the 2.1v3 leak to see if they're the same.
View 49 Replies
View Related
Nov 16, 2010
I just recently updated my phone from the 2.1 that came stock on my incredible to CyanogenMod 6.0.1 (i didn't do 6.0.2 because it gave me com.android.email errors) this was my phone on stock 2.1 (BEFORE i updated anything)
Code:..........
View 4 Replies
View Related
Jul 8, 2009
I want to read the baseband/radio version number but I can't find it. It's visible in the menu Settings/About Phone but not in the API?
View 5 Replies
View Related
Jun 13, 2010
What is baseband? an mine is 1.04.01.09.21 I have fresh 2.1.2 so what do i do is this bad to have or good or could i benefit from it being updated?
View 1 Replies
View Related
Aug 28, 2010
I'm currently using BBv.4 on my rooted Droid1 and I am still using the old baseband that came on the original stock ota 2.1 update1. I am always looking for ways to get more battery life out of my phone and that got me thinking. Technically I'm new to the whole smartphone scene and didn't get the whole hype about it until I got my Droid back in Dec. And since then have spent many hours learning about linux and researching the Android OS. Eventually I'm going to get into application development and coding. Everything I know is from research and trial and error on my Droid. The question I have is concerning the possible link between decreased battery life and the new baseband that is being pushed with the official Froyo ota update. I have not updated to an official 2.2 version so I can't compare the battery life between the two myself so I'm wondering if any of the more knowledgeable members of the forum ( you know who you guys are, lol) can help me out with this. The reason it is eating at me is because on Petes website there is a post on the forum about updating the baseband to the current version being used by Verizon instead of the one that was out in june with the same number. In the post it states the binary code is slightly different in the newer version. Could it be that something in the new version is effecting the battery life? Also, what is the downside of not updating my baseband if everything seems to be working properly. Sorry for such a long post but my mind is hungry for knowledge.
View 5 Replies
View Related
Jun 22, 2012
I have a rooted galaxy note and i want to install ICS Cyanogenmod 9 ROM, but I realize that first i need to install CWM, but I don't find the way...
View 1 Replies
View Related
Oct 13, 2010
"-Baseband Version VS740MVB.5210.1015: (new radio.img) Flash this just like a kernel. You must reboot into recovery once more after installing to wipe your cache. *Only flash once! I cannot be held liable for any damage caused to your device by flashing this!" If you back rev to Velocity 0.2 from Velocity 0.3, do you need to redo the Baseband update, or is it permanent?
View 20 Replies
View Related
Jun 7, 2010
Thought this needed its own thread as its already buried in the froyo thread.
View 29 Replies
View Related
Nov 25, 2010
The newest Sprint HTC Hero maintenance update from 11/19/10 also added a new radio baseband update. The version number is 2.42.02.10.29.
UPDATED 11/26/10: xda-developers - View Single Post - [ROM] NFX-Sprint.STOCK.2.32.651.2.ODEX.A2SD Updated:11/23/2010
View 22 Replies
View Related
Mar 30, 2010
UPDATE - The file can now be found here:
http://mydroidfiles.com/downloads/basebandupdate.zip
OP
-----------------------------
That's right folks,
This was the goodie that I wanted from the OTA update the most, and now, thanks to t3hSteve at Alldroid, it is available to us in update.zip form. Confirmed success with Clockwork recovery, and I have done it as well with SPRecovery 0.99.3b.
You WILL be prompted to reactivate your phone, and also, re-enter your Google password.
Link:
Baseband results anyone? Bueller?
Screenshot:
Additionally, I would suggest you reenter your programming menu (dial ##PROGRAM) to change your vocode to EVRC-B.
The SPC password is 000000
View 49 Replies
View Related
May 16, 2010
Tired of losing your 3G on the new baseband? Dropping signals and calls all the time since the OTA update? Well here's the solution! The Baseband Downgrade to .01P!
1) rename to update.zip
2) place on root of sdcard
3) reboot into SPR
4) choose Install
5) Allow installation from update.zip
6) Install
7) Re-Activate by dialing *228, option 1
View 49 Replies
View Related
Jun 6, 2010
Baseband update for your froyo 2.2
View 35 Replies
View Related
Jul 3, 2010
How to I install Baseband update (C_01.43.01P) currently showing in CW under Bugless Beast. Tried once without wiping. Do I need to wipe... again. Stuck on Moto icon now.
View 15 Replies
View Related
Jul 20, 2010
I was running NexFro 1.01 but due to alot of buggyness on my phone I had to abandon it and go back to NextBeastvs 1.1 on firmware 2.1.
After which my reception went to hell even after I did a *228,2. So I tried to install the baseband update .43.01 from the link located here:
http://androidforums.com/all-things-root-droid/121527-what-baseband-everyone.html
However it just error's out when I try to install from the SD card using lockwork, says Installation aborted.
Does this baseband only work for 2.2? If so what is the best one for firmware 2.1?
View 12 Replies
View Related
Nov 6, 2010
Whats the latest and most up to date baseband is there? I have 2.15.00.07.28
View 5 Replies
View Related
Sep 25, 2010
So I want to update my baseband for various reasons. I'm rooted and just ran unprovoked forever, so I've got s-off. I am currently running 2.1 update1, with baseband 1.00.03.04.06. how do I go about updating to a 2.xx.xx.xx.xx baseband, and do I need to be running 2.2 to do this?
View 1 Replies
View Related
Aug 6, 2010
For those stuck on the unofficial .3 version of Froyo, and would like to update to the official OTA .6 version, there's a leaked RUU that's out and about. Check out the link:
Pojoman vs. HTC - The race of the "delayed" 2.2 software fix. - xda-developers courtesy of Pojoman.
View 4 Replies
View Related
Aug 29, 2010
Okay so I rooted a few months ago, and installed a baked FroYo ROM from MoDaCo. However I want to update it to a later version. My question is this:
Since I've already rooted, and can use Hboot, can I simply copy the new zipped ROM to my SD Card, and install it through Hboot, or do I have to do through the whole rooting path again?
View 5 Replies
View Related
Jun 19, 2010
For an improved bugreporting I'd like if the tag android:versionName automatically contains the number of the revision on the svn server. Anyone knows how to do that?
`
View 2 Replies
View Related
Jul 27, 2010
I just got my Droid X yesterday, I just now got an OTA update to version 1.13.604.en.US. I think it's odd, that's still 2.1-update1. What gives?
View 6 Replies
View Related
Nov 23, 2009
I bought a new HTC hero last week, but I'm not sure if I need the "ROM version 2.73.405.5 update" available of the HTC website?? My build number is 1.76.405.6 , is that the old one?
If so, how do I back all my data? Do I need to take out the memory card before updating? And I also have a contract i.e. pay monthly, so do I need to take out the sim card because on the website it says: "This is a generic software update. Any additional software or settings provided by your mobile operator or company will be lost. If you require this customization, please contact your supplier first before upgrading."
View 8 Replies
View Related
Jun 5, 2010
I am new to Android development. I am using a x-platform development tool which builds and signs the APK for me. This tool has a bug and it does not generate APK's with the version code I specify, all APK's generated are version 1.0.
I would like to unpack the APK, edit the version code, and then resign and repackage it. It was signed using my keystore originally, so I have the keys needed to sign it again. How can this be done?
View 3 Replies
View Related
Apr 23, 2010
Just to give you heads up - there's new version of FB app on the Market with Inbox this time, but keep away until they'll fix the FC bug as most people (including myself) seem to have it.
View 20 Replies
View Related
Nov 27, 2009
How to update my G1 firmware version to 2.0, current is 1.5.
View 7 Replies
View Related
Oct 23, 2010
following on a recent topic posted here is my question- how can I find out which version of Android Market am I running? If I go to Market and press "menu" button on the phone none of the options answers to my question.
My second question is- where is the "Update all" button in the Market. I can not see it anywhere.I am running Froyo 2.2, Orange branded Desire, stock ROM.
View 7 Replies
View Related
Jan 17, 2010
I did the backup/restore before updating my Moment yesterday.For some reason one app (Locale) did not come back.The new version of Locale ($9.99) has been changed substantially and has been widely panned in the comments.The old version which I had (and is free) is supposed to be better.Is there a site for old apps?Also, I have another Moment which has the old app.Is it possible to "copy" it?
View 4 Replies
View Related
