I just recently updated my phone from the 2.1 that came stock on my incredible to CyanogenMod 6.0.1 (i didn't do 6.0.2 because it gave me com.android.email errors) this was my phone on stock 2.1 (BEFORE i updated anything)
Code:..........
View 4 Replies
I'm currently running the CM6 rom on my DINC, and I guess I forgot to update my baseband version, which is preventing me from using WiFi, and my camcorder function. So I downloaded the baseband update.zip, and put it on the root of my microSD, formatted in fat32 btw. Hboot detects the update.zip, but for whatever reason can't install it. When I go into ClockworkMod Recovery, and choose the apply sdcard:update.zip option, after 'Writing RDL/BP image..." I get the error "E:Error in /sdcard/update.zip (status 0) Installation aborted".
View 4 Replies View RelatedI have a rooted Droid Incredible currently running froyo (2.2) with a sky raider 2.0 ROM. I have attempted to install the PB31IMG.zip then the update.zip onto a rooted incredible then installed the sky raider ROM. I did not realize that the PB31IMG.zip did not successfully install. From what I could tell it unzips it then says that it cannot find the images. After downloading it to my PC before putting on the root of the SD card it wont let me open it and says that it is corrupt and could not create the file. However I am able to unzip it from my PC running XP. Basically My issue is that the sky raider 2.0 ROM only works with the version2 baseband and I have baseband 1.x version and cannot seem to get it updated. It is causing the wireless tether to not work and the camcorder. Sorry If i have provided too much detail or confusing. I have also tried to unroot but since it wont open the PB31IMG.zip i am unable to downgrade.
View 1 Replies View Related"-Baseband Version VS740MVB.5210.1015: (new radio.img) Flash this just like a kernel. You must reboot into recovery once more after installing to wipe your cache. *Only flash once! I cannot be held liable for any damage caused to your device by flashing this!" If you back rev to Velocity 0.2 from Velocity 0.3, do you need to redo the Baseband update, or is it permanent?
View 20 Replies View RelatedThought this needed its own thread as its already buried in the froyo thread.
View 29 Replies View RelatedThe newest Sprint HTC Hero maintenance update from 11/19/10 also added a new radio baseband update. The version number is 2.42.02.10.29.
UPDATED 11/26/10: xda-developers - View Single Post - [ROM] NFX-Sprint.STOCK.2.32.651.2.ODEX.A2SD Updated:11/23/2010
UPDATE - The file can now be found here:
http://mydroidfiles.com/downloads/basebandupdate.zip
OP
-----------------------------
That's right folks,
This was the goodie that I wanted from the OTA update the most, and now, thanks to t3hSteve at Alldroid, it is available to us in update.zip form. Confirmed success with Clockwork recovery, and I have done it as well with SPRecovery 0.99.3b.
You WILL be prompted to reactivate your phone, and also, re-enter your Google password.
Link:
Baseband results anyone? Bueller?
Screenshot:
Additionally, I would suggest you reenter your programming menu (dial ##PROGRAM) to change your vocode to EVRC-B.
The SPC password is 000000
Tired of losing your 3G on the new baseband? Dropping signals and calls all the time since the OTA update? Well here's the solution! The Baseband Downgrade to .01P!
1) rename to update.zip
2) place on root of sdcard
3) reboot into SPR
4) choose Install
5) Allow installation from update.zip
6) Install
7) Re-Activate by dialing *228, option 1
Baseband update for your froyo 2.2
View 35 Replies View RelatedHow to I install Baseband update (C_01.43.01P) currently showing in CW under Bugless Beast. Tried once without wiping. Do I need to wipe... again. Stuck on Moto icon now.
View 15 Replies View RelatedI was running NexFro 1.01 but due to alot of buggyness on my phone I had to abandon it and go back to NextBeastvs 1.1 on firmware 2.1.
After which my reception went to hell even after I did a *228,2. So I tried to install the baseband update .43.01 from the link located here:
http://androidforums.com/all-things-root-droid/121527-what-baseband-everyone.html
However it just error's out when I try to install from the SD card using lockwork, says Installation aborted.
Does this baseband only work for 2.2? If so what is the best one for firmware 2.1?
I was bored today and decided to do the updating through my phone (not through SE Update Service), unlike the previous 3 weeks, it finally shows there is an update for my phone. I was so excited and immediately hit ok and start downloading. It took total about 30 minutes to download and update the phone. Seems like a major update. I was so happy thinking this has got to be the Android 2.1 firmware update. After updating, the phone automatically restarted itself. Took about 1 minute to restart. Right away, I went to the setting - about phone to check the software version. It still shows Firmware 1.6. But the baseband version is now 1.1.27 instead of 1.1.16 before. What is this baseband version?
View 8 Replies View RelatedI have slim halo 4.2.2 on my gs2 but I'm thinking this is a more general issue.
View 1 Replies View RelatedIf you have received the 2.1 OTA from Verizon, can you tell us your baseband version, kernel, build #, and software #.
Just to compare those to the 2.1v3 leak to see if they're the same.
Whats the latest and most up to date baseband is there? I have 2.15.00.07.28
View 5 Replies View RelatedSo I want to update my baseband for various reasons. I'm rooted and just ran unprovoked forever, so I've got s-off. I am currently running 2.1 update1, with baseband 1.00.03.04.06. how do I go about updating to a 2.xx.xx.xx.xx baseband, and do I need to be running 2.2 to do this?
View 1 Replies View Relatedis the 2.1 firmware version dj07 baseband version the latest update available for the samsung moment?
View 1 Replies View Relatedwith all the baseband's out right now, and all the questions as which one to run, perhaps it would be a good idea to post which one you are using, have used and your findings. i am on 01.43.01p. it has the fastest 3g speeds for me. i tried 01.41.00r but didnt get as good of a reception.
View 48 Replies View RelatedWhats the best baseband out right now to use with froyo roms i dont want anything that has known issues.
View 15 Replies View RelatedI want to read the baseband/radio version number but I can't find it. It's visible in the menu Settings/About Phone but not in the API?
View 5 Replies View RelatedDoes it actually work? I still have to manually update the apps I put on auto update.
View 2 Replies View Relatedexperts and newbies. What is the 3p baseband? What do we benefit from it? What baseband are we currently running? I have a Motorola Droid.
View 2 Replies View RelatedI have been looking at the baseband threads and I am thinking adout trying a new one. Mine is still the stock one. Should I try use Pete's. All in one? I also see it depends some on your location.
View 12 Replies View RelatedJust wanting to know what the current baseband for the 2.2 release is. I'm terrible with searches and can't seem to find it.
View 3 Replies View RelatedEver since manually updated the baseband on my phone my service where i use the phone the most has been horrible my Perl also changed when doing this so i dont know if thats the reason or the baseband its self Ive tried countless times to update my Perl but it doesn't change any ideas on what i can do to improve my service by either getting new Perl or change baseband back
View 11 Replies View RelatedI'm on NexFro v1.0 baseband C_01.43.01P (2nd froyo baseband leak) now and my signal is bad. Can I downgrade to C_01.41.01P (1st froyo baseband leak)? Everything was ok with C_01.41.01P. Or do I downgrade to the one before that? What should I do and how should I do whatever it is I need to do.
View 2 Replies View RelatedI have a problem with 3g connenction since flashing galaxo1.6.1 coming from ii4 if i recall correct. after being disappointed of galaxo for that reason i decided to flash another custom 1.5 firmware (archers italy ROM) which runs perfectly except i also have the same problems with 3g (connection is working after boot, but only for a while then the 3g icon is still there but only the upload arrow blinks, and no data is coming in). some guy on a german forum told me he had the same problem untill he went back to ii5 which changed the baseband also and now 3g works perfect again. so i guess if i could flash only baseband from ii5 this could maybe solve my problem without having to flash 3 firmwares in a row. the only thing i do not know is how to do this, where in the package is the baseband located, and is it possible to do so?
View 17 Replies View RelatedWhat is baseband? an mine is 1.04.01.09.21 I have fresh 2.1.2 so what do i do is this bad to have or good or could i benefit from it being updated?
View 1 Replies View RelatedWhen it Rains, it Pours: Newest Radio File for the Motorola Droid C_01.43.01P you must have the C.01.41.00R baseband to upgrade to this one.
View 49 Replies View RelatedI Am Using Galaxy S Duos. I Create A Custom ROM using Kitchen. I Used Indian Baseband. Some User Are From Brazil They Want Brazilian Baseband. Can I Change Baseband In ROM Zip Or Make ROM Running On Brazilian Baseband?
View 1 Replies View Related