General :: How To Change Boot Screen Of Samsung Pocket GT - S5301B
Jan 30, 2014
I would like to know how to change the boot screen of Samsung Pocket GT-S5301B
I followed some tips that said to replace the bootsamsung.qmg file but did not work
I tried to create a custom in "Samsung Theme Designer" program using the same 240x320 resolution of the device, but also did not work
I set the folder " system media" as "RW-O" through "Root Explorer" program
Note: The screen off, I managed to change The handset has the Android version 4.0.4 installed How should I proceed?
View 1 Replies
Mar 26, 2014
My Galaxy pocket wont turn on.Last 4 days I dropped my phone on our pail full of water on our garden. I didnt noticed it.I keep searching for it in our house but no hope. Last 2 days I found it and tried the rice technique to make it dry again. Today It wont turn on and I cant charge it. I borrowed the battery of my friend's SGP and my SGP turned on. But I tried my SGP battery on my friend's phone but my friends phone wont boot.My Smartphone: Samsung Galaxy Pocket (GT-S5300)
-Stock Firmware
-Rooted
-with CWM recovery
will i need to replace the battery?
View 2 Replies
View Related
Jun 24, 2013
I installed the stock firmware on my Galaxy Pocket(i.e., XXLF5 Version). Then this morning i downloaded the MakDroid ROM. and installed it through CWM recovery. But after that my phone just keep restarting to the SAMSUNG Logo and freezes there after vibrating several times..
View 6 Replies
View Related
Jun 9, 2013
I had my Galaxy Pocket rooted and got the Jellyblast v3 rom, it was doin fine until I checked on the app OTA and check for update, a new update appeared which is the Nemesis 2.5 Hybrid-Holo Editon. It asked me to download it and so I did. When it was done, it asked me if I wanted to install it and so I did, and rebooted. Later I noticed that it was already boot looping. I tried pulling the battery off and to clockwork mode, with the proper procedure..the holds and presses, but still it just kept boot looping. Tried to connect it to the PC using the USB chord and yet it just shows the charging icon and sooner it turns to white. I tried Kies but still it turned white screen all over again; no device found.
View 8 Replies
View Related
Jan 8, 2013
I rooted my Galaxy Pocket lately and installed LCD modder just to try changing the dpi settings. i changed the stock 120 dpi to 160 and clicked save. the phone froze and i had to pull of the battery. after i restart all i get is a boot loop. i get 3 things
(1) s5300 logo
(2) animated samsung logo
(3) flashing samsung logo which appears just before the lock screen appears
( 1 and 2 vibrations during this) and then it loops all over again. as i understand the change i dpi is not supported for my device and it is not loading into the home screen. the solution seems to be editing the build.prop file to reassign the stock dpi value. but to access the file i have to get into adb mode and have the device available in the list. but since debugging mode was not selected before i essentially soft bricked my phone i am not able to access my device in adb mode. i am able to get into recovery mode tho.any way to edit the build.prop file from this situation??.....
View 6 Replies
View Related
Aug 28, 2010
I have Skyraider 2.5.2. I want to be able to remove the first part of the boot screen where it says skyraider and has the android waving around for a bit. I tried to delete it from the it's directory /system/media/ but it says it is root only. What do I do? I cannot find anything that shows how to change around the boot screen...
View 3 Replies
View Related
Oct 17, 2010
I've root my phone, so how to change it's boot screen? Any1?
View 13 Replies
View Related
Mar 29, 2014
I am stuck in boot screen in Samsung Galaxy note 3 after rooting with three lines of text on top saying
RECOVERY BOOTING...
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit : recovery
Samsung
GALAXY Note 3
SM-N9005
More details: I used CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 with Odin3 I tried to root two times
View 1 Replies
View Related
Nov 3, 2010
I have to send my X back and well, it has the boot image of an android peeing on an apple. I don't think Verizon will take to kindly to that. So I have to reset the entire phone and get it back to factory defaults. I don't know how to change the boot animation.
View 3 Replies
View Related
Aug 17, 2010
That want to change their Incredible's Splash Screen and boot animation. I take no credit for developing any of this, just wrote up a little guide for noobs. All credit goes to App developers of Boot animation changer lite, touchpro247 for his xda thread.
Go Here :
http://www.gizmoninja.com/2010/08/17/change-your-droids-splash-screen-and-boot-animation-its-so-easy/
How to includes how to:
Add your own splash screen.
Add custom boot animations and sounds.
Links to some cool apps and animations and splash screens.
View 46 Replies
View Related
Jun 13, 2012
Instead of seeing the boring old Android logo or my service provider's logo, I'd love to see the standard text-based Linux boot screen that shows the status of all the hardware and configuration info as my phone boots. My current phone is an HTC EVO 3D running Cool ICS with Sense 3.6 and Revolutionary CWM.
View 2 Replies
View Related
May 9, 2013
i use a samsung galaxy pocket but there is a problem when i turn off my phone , it displays "on key 7s reset " i don't know what's it means.
so i wanted install the stock roms agon called xxfl5 but i am already on xxfl5 firmware and when i try to install with odin it doesn't work it's too low.
View 1 Replies
View Related
Jan 10, 2013
for the Mak-Droid Rom it was amazing rom and i love it very much but there was a little problem...this rom do not support Arabic Language So I ask the Developer to find a solution for this problem on the next version of the rom
View 1 Replies
View Related
Sep 27, 2012
I tried the MAK-DROID rom (thread) and it works great, but MAK-DROID didn't have the language pt-br (portuguese from Brazil). So I found the Aspire Rom (thread) and I give a try... and thats was a bad idea.
Now my fone even boot. It freezes on "GT-S5300 SAMSUNG" and vibrate a several times.
So, I boot on recovery and apply CWM again. On CWM I applied the MAK-DROID again, but didn't work.
After that I tried restore the my stock backup done with CWM. But even this didn't work. I received a message about EXTFS (or something like that) and impossibility of format the /system.
My final thought was try with Odin. So I follow the post #8 from MAK-DROID thread. I downlod the Odin and the S5300XXLF5 firmware. I open Odin and selected on PDA the *.tar.md5 file. But I received:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5300XXLF5_S5300BTULF1_S5300XXLF5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
[code]...
So I tried again, this time with the pit file (S5300_coriemmc_0117.pit) on PIT option (when I select the pit file, automatically the option "Re-partition" is checked) and the *.tar.md5 file on PDA option. But I received:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5300XXLF5_S5300BTULF1_S5300XXLF5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
[code]...
I still have access to CWM (the update.zip is accessible from recovery).
View 9 Replies
View Related
Jan 8, 2013
I Have Samsung galaxy pocket, when i m in call it locks the screen and I want to remove that lock Permanently can any Telme. How can I remove lock permanently of Samsung Galaxy pocket ?
View 1 Replies
View Related
Apr 7, 2014
Can customize the ROM of my Samsung GT S5312.
Android 4.1.2 JellyBean
View 7 Replies
View Related
Aug 21, 2013
I have a samsung galaxy pocket (s5300). Once upon a time I rooted it without using odin and it worked
After I tried some custom roms. But in the end I used my CWM Backup file to restore my original rom. But the damn thing just doesn't wanna connect to kies any more. Now I wan't to reflash it's stock firmware with Odin and I'm using a nokia cable (i know that I should use the real thing but it isn't sold in my country + in the begining I didn't have any trouble with the cable and my father flashed an android 4.0.4 on his Samsung Galaxy Nexus using this same cable). So when i put my phone in download mode and connected it gives me unknown usb device. I downloaded the drivers installed them tried again, but the damn thing just doesn't associate with them.
Than I showed it the proper drivers manually ( you know device manager-->update driver-->sellect driver; you get the picture) and still nothing. And i really use Kies and want to fix the problem. What should I do.
View 1 Replies
View Related
Aug 1, 2013
Is there a way to block access to browsers? I would like the user of a Samsung galaxy Pocket (version 4.0.4) to be able to access one browser only.
The browser in use has a blacklist filter which block websites, but indeed you can easily bypass it by installing a new browser.
My past attempts: I have searched for a long time but could not find anything that worked. The browsers I have found which can block other browsers are not compatible with this device.
I have also searched for alternative ways of blocking websites though a blacklist but all of those solutions require rooting the device, which I do not have enough technical confidence to do.
Blocking Play store is not either an option since you would be able to install new browsers in other ways.
View 3 Replies
View Related
Aug 11, 2013
I looked all around google and I could not find a way to root it except for the OneClickRoot thing but it failed. How to root it?
View 1 Replies
View Related
May 28, 2013
Is there a way to root Samsung galaxy pocket duos GT-S5303 . Android version : 4.0.4
View 9 Replies
View Related
Apr 13, 2010
Tried rooting so I started off flashing r8 of bh_man's 1.6 rom. Went through the setup, odin turned blue to pass and I let the phone run past the android system and then the screen turned off.
Thing about it is that the phone is still being detected by the computer and odin. It's like my phone is on a screen lock but not responding to when I push unlock.
Ive tried every custom rom and each one does the same. I try to go back to stock and most of the time the program closes, when it doesn't I try to flash it and it goes through the process but goes on forever. One time I let the timer go on for 2 hours and it was still on 5/9 completed.
View 10 Replies
View Related
Jul 9, 2012
Odin only detect my Samsung Galaxy Pocket S5300 when the power is off.
In a meanwhile:
- Odin cannot detect in Download mode.
- KIES is able to connect, detect & do the backup.
- I've tried many versions of Odins.
- Odin(s) is able to detect other phone (Galaxy Mini S5570).
- PC could detect the driver and do the file transfer.
Why only when the power off id:com turns into yellow (or green in Odin 3) ????
View 1 Replies
View Related
Nov 10, 2013
Yesterday I was having fun trying out the secret codes (like *#*#4636#*#*) and tried out the touch screen code. Then clicked on update (firmware).
Then the touch was not working. I tried taking out battery and putting it back on. Tried factory reset after backing up data with Kies. Tried rooting the simplest way. Tried to flash using Odin with a recovery and pit file. Still nothing is working.
View 4 Replies
View Related
Feb 28, 2010
How do I do that? Got a link/tut? Can youtell me how I can switch mt png file for the samsung one retar it and make it work? Right now I get this file too large in the Sprint CL14 Uploader...
View 1 Replies
View Related
Jan 22, 2014
Is there a way to block or remove built in applications on an android phone. I want to limit what you can do on the phone e.g. only call, text, email and use one or two third party applications. Is it possible to do that without rooting the phone?
Looking to do this on a Samsung Galaxy Pocket.
View 4 Replies
View Related
Nov 30, 2012
Is there any power control widget where i can directly switch between 2g 3g for GB.
View 2 Replies
View Related
Sep 3, 2010
Tried this ( the terminal emulator method) xda-developers - View Single Post - [MOD] STATUS BAR MOD'S 'Change the colour of your status bar and now pulldown ' then got a boot loop. Had Clockwork installed and created a backup, but now cannot return to clockwork mod recovery, only the stock recovery. I need to get into clockwork without going through ROM manager.
View 12 Replies
View Related
Dec 22, 2012
how to change bottom icons on home screen (e.g. phone,contact,message,internet,apps) i think its called the bottom dock its for new Samsung Galaxy S3 4G i cant find any forum or vids on youtube, i can find plenty on how to change the icons on the lock screen but thats not what i looking for.
View 5 Replies
View Related
Jan 16, 2014
i just got a new phone (my first android), ive been trying to change my boot animation and cant seem to get it to work,i replaced the file which was named bootanimation_virigin.zip (also didnt think of renaming the original, so the original is gone), i even replaced the stock one which was named bootanimation.zip (also didnt rename it or back it up... -__-;; ) i made sure the files are correct and match up with the desc.txt file. i copied the original boot animation zip to my computer and just replaced everything, same number of files, about the same file size, same file type, same size and just put the folders "part0", "part1" and the desc.txt files back on my sd card and moved it to system/media/bootanimation_virigin, i compressed the files into a zip using root browser from the rom toolbox, i made sure that the compression was set to none, and then moved the zip file to system/media, i set the permisions to rw-r--r-- which is the exact same as the other boot animations. nothing shows up anymore till the phone is done booting but ill admit that it is definitely better than the stock virgin mobile animation...
here is everything i have for this boot animation (including: original virgin mobile boot animation, a video of the boot animation, all the pictures, and a folder titled "bootanimation_virign" which is the folder i moved into system/media)
[URL] ........
i thought it was something on my phone but it was the way after effects renders jpeg sequences, i think it has something to do with the attributes of the jpeg file but anyways i just used a program called boot animation creator and it worked perfectly
View 7 Replies
View Related
Aug 29, 2013
How to change the kernel boot logo on my samsung kernel? I don't mean the boot animation. I may have built a ROM but the kernel used there doesn't belong to me.
View 9 Replies
View Related
