General :: Touch Not Working After Firmware Update - Samsung Galaxy Pocket S5300
Nov 10, 2013
Yesterday I was having fun trying out the secret codes (like *#*#4636#*#*) and tried out the touch screen code. Then clicked on update (firmware).
Then the touch was not working. I tried taking out battery and putting it back on. Tried factory reset after backing up data with Kies. Tried rooting the simplest way. Tried to flash using Odin with a recovery and pit file. Still nothing is working.
View 4 Replies
Sep 27, 2012
I tried the MAK-DROID rom (thread) and it works great, but MAK-DROID didn't have the language pt-br (portuguese from Brazil). So I found the Aspire Rom (thread) and I give a try... and thats was a bad idea.
Now my fone even boot. It freezes on "GT-S5300 SAMSUNG" and vibrate a several times.
So, I boot on recovery and apply CWM again. On CWM I applied the MAK-DROID again, but didn't work.
After that I tried restore the my stock backup done with CWM. But even this didn't work. I received a message about EXTFS (or something like that) and impossibility of format the /system.
My final thought was try with Odin. So I follow the post #8 from MAK-DROID thread. I downlod the Odin and the S5300XXLF5 firmware. I open Odin and selected on PDA the *.tar.md5 file. But I received:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5300XXLF5_S5300BTULF1_S5300XXLF5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
[code]...
So I tried again, this time with the pit file (S5300_coriemmc_0117.pit) on PIT option (when I select the pit file, automatically the option "Re-partition" is checked) and the *.tar.md5 file on PDA option. But I received:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5300XXLF5_S5300BTULF1_S5300XXLF5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
[code]...
I still have access to CWM (the update.zip is accessible from recovery).
View 9 Replies
View Related
Aug 21, 2013
I have a samsung galaxy pocket (s5300). Once upon a time I rooted it without using odin and it worked
After I tried some custom roms. But in the end I used my CWM Backup file to restore my original rom. But the damn thing just doesn't wanna connect to kies any more. Now I wan't to reflash it's stock firmware with Odin and I'm using a nokia cable (i know that I should use the real thing but it isn't sold in my country + in the begining I didn't have any trouble with the cable and my father flashed an android 4.0.4 on his Samsung Galaxy Nexus using this same cable). So when i put my phone in download mode and connected it gives me unknown usb device. I downloaded the drivers installed them tried again, but the damn thing just doesn't associate with them.
Than I showed it the proper drivers manually ( you know device manager-->update driver-->sellect driver; you get the picture) and still nothing. And i really use Kies and want to fix the problem. What should I do.
View 1 Replies
View Related
Jul 9, 2012
Odin only detect my Samsung Galaxy Pocket S5300 when the power is off.
In a meanwhile:
- Odin cannot detect in Download mode.
- KIES is able to connect, detect & do the backup.
- I've tried many versions of Odins.
- Odin(s) is able to detect other phone (Galaxy Mini S5570).
- PC could detect the driver and do the file transfer.
Why only when the power off id:com turns into yellow (or green in Odin 3) ????
View 1 Replies
View Related
Jun 12, 2013
I don't have a pc so i can't reflash stock rom on my galaxy pocket. Need file backup of stock rom which was rooted. I need S5300DXLK1 or S5300XXLF5 or other one (except DXLE1 ) which has Vietnamese,
View 5 Replies
View Related
Dec 9, 2012
how to improve video player performance on Galaxy Pocket using MX Player .
View 3 Replies
View Related
Nov 28, 2012
My Galaxy pocket is loosing it's data connection and only reboot is working although the dual arrow marks with H exist on screen. The rom is original without any changes.
View 5 Replies
View Related
Jan 8, 2013
I rooted my Galaxy Pocket lately and installed LCD modder just to try changing the dpi settings. i changed the stock 120 dpi to 160 and clicked save. the phone froze and i had to pull of the battery. after i restart all i get is a boot loop. i get 3 things
(1) s5300 logo
(2) animated samsung logo
(3) flashing samsung logo which appears just before the lock screen appears
( 1 and 2 vibrations during this) and then it loops all over again. as i understand the change i dpi is not supported for my device and it is not loading into the home screen. the solution seems to be editing the build.prop file to reassign the stock dpi value. but to access the file i have to get into adb mode and have the device available in the list. but since debugging mode was not selected before i essentially soft bricked my phone i am not able to access my device in adb mode. i am able to get into recovery mode tho.any way to edit the build.prop file from this situation??.....
View 6 Replies
View Related
Oct 3, 2010
Pls advise me the best unofficial firmware update to download. Froyo based.
View 4 Replies
View Related
Jul 7, 2010
My EVO has been answering phone calls in my pocket. I've even "butt dialed" a couple of people when I forgot to turn of the screen before sticking it in the pocket.
If I forget to turn off the screen, that's my fault, but the screen turns itself on when the phone rings.
How the heck is a capacitive screen working through fabric, anyway?
View 8 Replies
View Related
Aug 30, 2013
I bought LG VU II (F200L) in perfectly working condition, it almost new. After installing LG PC suite and connecting it said new firmware update is available so I proceeded which was done successfully but since then touch screen is not working properly.
Usually it responds ok but main issue is back button is not working anymore, and sometimes when I press power button to unlock screen it responds very weird and not so responsive as well as sometimes doesnt responds or opens apps that I havent even clicked.
I tried to restore, emergency restore, LG Flash tools and used correct KDZ files to flash roms successfully but nothing seems to resolve this issue.
View 2 Replies
View Related
Jul 3, 2012
I have flashed my x10a with flashtool and x10_2.3_aro_2.ftf firmware. But after the flashing is finished, my phone screen touch is not working. What can I do now? I am unable to install xrecovery to install another rom bcoz screen touch isn't working. So I can't install any custom ROM.
View 2 Replies
View Related
Dec 17, 2012
I'm trying to flash TSP (Touch Firmware in my device I9305 galaxy S3.
I call Keystring_factory.apk with key *#2463# but a windows when try to open the is closed.
The same think happend when i call the app from adb with
Quote:
su -c 'am start -n com.sec.android.app.factorymode/com.sec.android.app.status.touch_firmware'
Is anyway i can force flash the touch firmware without read anything else to the device?Any way i can call the button TSP FW update (kernel) with adb directly?
[URL]
I make a mistake and flash N7105 boot.img to my device as i test somethinks so now my touch doesn't work.
I give you the decompiled Keystring_factory.apk.
I have the device for 17 days and i know i can restore all thinks and go to Samsung Service center but i dont whant to do that on a new device.
View 2 Replies
View Related
Jun 9, 2013
I had my Galaxy Pocket rooted and got the Jellyblast v3 rom, it was doin fine until I checked on the app OTA and check for update, a new update appeared which is the Nemesis 2.5 Hybrid-Holo Editon. It asked me to download it and so I did. When it was done, it asked me if I wanted to install it and so I did, and rebooted. Later I noticed that it was already boot looping. I tried pulling the battery off and to clockwork mode, with the proper procedure..the holds and presses, but still it just kept boot looping. Tried to connect it to the PC using the USB chord and yet it just shows the charging icon and sooner it turns to white. I tried Kies but still it turned white screen all over again; no device found.
View 8 Replies
View Related
Aug 16, 2010
I have been waiting for kies to say that new firmware is available (when it works!) and finally it knows there is an update to my JF3 - presumably JM1.
However, is says that 'this device's version cannot be updated'
My SGS was bought from Mobiles.co.uk and is using an Orange SIM and as far as I can tell it is not locked or branded.
The current firmware is
PDA ...XXJF3
Phone ...XXJF3
CSC ...XAJF3
Is this an 'Orange' CSC?
How I can get it updated?
View 49 Replies
View Related
Jun 24, 2010
Seems like a silly question but i had an HTC desire which i swapped for the galaxy s for obvious reasons... anyway in the settings/about phone section on my desire there was an option to check for firmware updates but in the galaxy there is not so my question is this...
View 6 Replies
View Related
Nov 30, 2010
So yeah, basically my Kies crashed while it was updating firmware and now I can't connect my phone to my PC anymore, it just doesn't recognize it. Windows just says something about corrupted device but kies can't recognize it either. And here's the really great stuff. I can't even boot the damn device! It just gives me thing weird logo that has mobile phone and my computer on it, and then some yellow triangle with exclamation mark in between and it doesn't go away. I've tried every button combination and hard-boot with removing the battery but no luck. I'm really really frustrated because I can't use this thing at all now! What a great update software you got there Samsung, really great (endrant). So can anyone give any pointers what I should do?
View 5 Replies
View Related
Oct 16, 2010
I just plugged into Kies and performed a Firmware update, which I assume was the Froyo update. It all ran it's course perfectly and the phone then went to reboot. Following this, it hung on the Galaxy S animated screen before simply going to a black screen (I know the phone is still on, because the two bottom corner buttons will light up if pressed).
I realise that this black screen is quite common, and that people suggest booting into recovery mode. The problem is, I've never been able to get my phone into recovery mode. I turn the phone on and hold down Power + Home + Voume Up for a couple of seconds and then let go... it does nothing, it just goes onto the Vodafone screen and then carries on booting.
I also tried holding down these buttons for a little longer, but all that it does is pushes the phone into a constant restart loop (as obviously I'm holding down the power button).
View 9 Replies
View Related
Aug 25, 2010
What's the newest firmware update for SGS? And what's the best of the 2.1 v.?
View 2 Replies
View Related
Oct 15, 2010
I just updated to the new version through Kies. As soon as my phone booted and I exited lock screen, a lot of popups of processes that crashed show up. This includes android.process.acore, com.google.processes.gapps, Daily Briefing, calendar... pretty much everything shows up and I don't have access to anything on the phone. Apparently usb debug got back on so I can't get kies to recognize the phone.
I have a contract-free galaxy s from germany. Rooted. Uninstalled ryans lag fix through market before upgrading. I don't know what I did wrong. What can I do?
View 4 Replies
View Related
May 9, 2013
i use a samsung galaxy pocket but there is a problem when i turn off my phone , it displays "on key 7s reset " i don't know what's it means.
so i wanted install the stock roms agon called xxfl5 but i am already on xxfl5 firmware and when i try to install with odin it doesn't work it's too low.
View 1 Replies
View Related
Jan 8, 2013
I Have Samsung galaxy pocket, when i m in call it locks the screen and I want to remove that lock Permanently can any Telme. How can I remove lock permanently of Samsung Galaxy pocket ?
View 1 Replies
View Related
Mar 26, 2014
My Galaxy pocket wont turn on.Last 4 days I dropped my phone on our pail full of water on our garden. I didnt noticed it.I keep searching for it in our house but no hope. Last 2 days I found it and tried the rice technique to make it dry again. Today It wont turn on and I cant charge it. I borrowed the battery of my friend's SGP and my SGP turned on. But I tried my SGP battery on my friend's phone but my friends phone wont boot.My Smartphone: Samsung Galaxy Pocket (GT-S5300)
-Stock Firmware
-Rooted
-with CWM recovery
will i need to replace the battery?
View 2 Replies
View Related
Apr 7, 2014
Can customize the ROM of my Samsung GT S5312.
Android 4.1.2 JellyBean
View 7 Replies
View Related
Sep 13, 2010
I would have thought that a firmware update via Kies would preserve user data, contacts, apps I paid for from the market, phone settings etc. But after going from I9000DXJF4 to I9000DXJG4 using that appalling excuse for software (Kies) I have a completely empty device with just stock standard apps. No warnings to click through about wiping data, no strange error messages on the device. Is this normal? If so I might as well put my SIM card back in my iPhone until there is a consensus build of Froyo out for the Galaxy S as re-downloading and resyncing everything each time.
View 8 Replies
View Related
Feb 15, 2014
I updated my phone earlier today to jelly bean 4.3. Since then, I have stopped receiving network. The EMEI number doesn't show in the device info either. Tried restarting, taking out the sim card and putting it back in. Nothing works. It says this right after restarting, "currently unable to download, try again later". I bought my phone from Qatar and I am currently using it in UK (t-mobile) if that makes any difference, but it was working perfectly fine before.
View 1 Replies
View Related
Aug 1, 2013
Is there a way to block access to browsers? I would like the user of a Samsung galaxy Pocket (version 4.0.4) to be able to access one browser only.
The browser in use has a blacklist filter which block websites, but indeed you can easily bypass it by installing a new browser.
My past attempts: I have searched for a long time but could not find anything that worked. The browsers I have found which can block other browsers are not compatible with this device.
I have also searched for alternative ways of blocking websites though a blacklist but all of those solutions require rooting the device, which I do not have enough technical confidence to do.
Blocking Play store is not either an option since you would be able to install new browsers in other ways.
View 3 Replies
View Related
Aug 11, 2013
I looked all around google and I could not find a way to root it except for the OneClickRoot thing but it failed. How to root it?
View 1 Replies
View Related
May 28, 2013
Is there a way to root Samsung galaxy pocket duos GT-S5303 . Android version : 4.0.4
View 9 Replies
View Related
Apr 21, 2014
I have a Galaxy s4 (i9500) and a linksys cisco e900 router
Recently my isp asked me to upgrade the firmware
Until I updatee my firmware everything was working fine
After the firmware upgrade I am experiencing the following issues:
At the beginning when I conmect to my wifi everything works fine for the first 5 min, all apps work flawlessly, then suddenly my phone only uploads date (up arrow only) but no down arrow n then my apps such as whatsapp, fb messenger, etc do not recieve any data until I goto those apps and stay in there for about a min. Then I get all my whatsapp messages sent about a min ago . But my browser seems fine..and the speed there is good.
View 3 Replies
View Related
