General :: Samsung Galaxy Pocket S5300 - Odin Only Detect Phone When Power Is Off
Jul 9, 2012
Odin only detect my Samsung Galaxy Pocket S5300 when the power is off.
In a meanwhile:
- Odin cannot detect in Download mode.
- KIES is able to connect, detect & do the backup.
- I've tried many versions of Odins.
- Odin(s) is able to detect other phone (Galaxy Mini S5570).
- PC could detect the driver and do the file transfer.
Why only when the power off id:com turns into yellow (or green in Odin 3) ????
View 1 Replies
Sep 27, 2012
I tried the MAK-DROID rom (thread) and it works great, but MAK-DROID didn't have the language pt-br (portuguese from Brazil). So I found the Aspire Rom (thread) and I give a try... and thats was a bad idea.
Now my fone even boot. It freezes on "GT-S5300 SAMSUNG" and vibrate a several times.
So, I boot on recovery and apply CWM again. On CWM I applied the MAK-DROID again, but didn't work.
After that I tried restore the my stock backup done with CWM. But even this didn't work. I received a message about EXTFS (or something like that) and impossibility of format the /system.
My final thought was try with Odin. So I follow the post #8 from MAK-DROID thread. I downlod the Odin and the S5300XXLF5 firmware. I open Odin and selected on PDA the *.tar.md5 file. But I received:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5300XXLF5_S5300BTULF1_S5300XXLF5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
[code]...
So I tried again, this time with the pit file (S5300_coriemmc_0117.pit) on PIT option (when I select the pit file, automatically the option "Re-partition" is checked) and the *.tar.md5 file on PDA option. But I received:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5300XXLF5_S5300BTULF1_S5300XXLF5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
[code]...
I still have access to CWM (the update.zip is accessible from recovery).
View 9 Replies
View Related
Aug 21, 2013
I have a samsung galaxy pocket (s5300). Once upon a time I rooted it without using odin and it worked
After I tried some custom roms. But in the end I used my CWM Backup file to restore my original rom. But the damn thing just doesn't wanna connect to kies any more. Now I wan't to reflash it's stock firmware with Odin and I'm using a nokia cable (i know that I should use the real thing but it isn't sold in my country + in the begining I didn't have any trouble with the cable and my father flashed an android 4.0.4 on his Samsung Galaxy Nexus using this same cable). So when i put my phone in download mode and connected it gives me unknown usb device. I downloaded the drivers installed them tried again, but the damn thing just doesn't associate with them.
Than I showed it the proper drivers manually ( you know device manager-->update driver-->sellect driver; you get the picture) and still nothing. And i really use Kies and want to fix the problem. What should I do.
View 1 Replies
View Related
Nov 10, 2013
Yesterday I was having fun trying out the secret codes (like *#*#4636#*#*) and tried out the touch screen code. Then clicked on update (firmware).
Then the touch was not working. I tried taking out battery and putting it back on. Tried factory reset after backing up data with Kies. Tried rooting the simplest way. Tried to flash using Odin with a recovery and pit file. Still nothing is working.
View 4 Replies
View Related
Jun 12, 2013
I don't have a pc so i can't reflash stock rom on my galaxy pocket. Need file backup of stock rom which was rooted. I need S5300DXLK1 or S5300XXLF5 or other one (except DXLE1 ) which has Vietnamese,
View 5 Replies
View Related
Dec 9, 2012
how to improve video player performance on Galaxy Pocket using MX Player .
View 3 Replies
View Related
Nov 28, 2012
My Galaxy pocket is loosing it's data connection and only reboot is working although the dual arrow marks with H exist on screen. The rom is original without any changes.
View 5 Replies
View Related
Jan 8, 2013
I rooted my Galaxy Pocket lately and installed LCD modder just to try changing the dpi settings. i changed the stock 120 dpi to 160 and clicked save. the phone froze and i had to pull of the battery. after i restart all i get is a boot loop. i get 3 things
(1) s5300 logo
(2) animated samsung logo
(3) flashing samsung logo which appears just before the lock screen appears
( 1 and 2 vibrations during this) and then it loops all over again. as i understand the change i dpi is not supported for my device and it is not loading into the home screen. the solution seems to be editing the build.prop file to reassign the stock dpi value. but to access the file i have to get into adb mode and have the device available in the list. but since debugging mode was not selected before i essentially soft bricked my phone i am not able to access my device in adb mode. i am able to get into recovery mode tho.any way to edit the build.prop file from this situation??.....
View 6 Replies
View Related
Nov 30, 2012
Is there any power control widget where i can directly switch between 2g 3g for GB.
View 2 Replies
View Related
Jan 22, 2014
Is there a way to block or remove built in applications on an android phone. I want to limit what you can do on the phone e.g. only call, text, email and use one or two third party applications. Is it possible to do that without rooting the phone?
Looking to do this on a Samsung Galaxy Pocket.
View 4 Replies
View Related
May 9, 2013
i use a samsung galaxy pocket but there is a problem when i turn off my phone , it displays "on key 7s reset " i don't know what's it means.
so i wanted install the stock roms agon called xxfl5 but i am already on xxfl5 firmware and when i try to install with odin it doesn't work it's too low.
View 1 Replies
View Related
Jan 8, 2013
I Have Samsung galaxy pocket, when i m in call it locks the screen and I want to remove that lock Permanently can any Telme. How can I remove lock permanently of Samsung Galaxy pocket ?
View 1 Replies
View Related
Mar 26, 2014
My Galaxy pocket wont turn on.Last 4 days I dropped my phone on our pail full of water on our garden. I didnt noticed it.I keep searching for it in our house but no hope. Last 2 days I found it and tried the rice technique to make it dry again. Today It wont turn on and I cant charge it. I borrowed the battery of my friend's SGP and my SGP turned on. But I tried my SGP battery on my friend's phone but my friends phone wont boot.My Smartphone: Samsung Galaxy Pocket (GT-S5300)
-Stock Firmware
-Rooted
-with CWM recovery
will i need to replace the battery?
View 2 Replies
View Related
Apr 7, 2014
Can customize the ROM of my Samsung GT S5312.
Android 4.1.2 JellyBean
View 7 Replies
View Related
Apr 18, 2012
I have a question about the files being used to flash my Samsung Galaxy S2 via Odin.
I have already seen this link [URL]...
I am trying to flash the PDA, Phone and CSC back all to normal stock. I have downloaded a firmware and I only have one file with a .dll file. The one file I have is named "I9100BOKK1_I9100TMUKK1_I9100BOKJ1_HOME.tar.md 5" I have extracted the files from here also and it contains boot.bin, cache.img, factoryfs.img, hidden.img, modem.bin, param.lfs, Sbl.bin and zImage.
How with these files and Odin do I flash all three parts. I can't see how to use these files on the above link with instructions for flashing and rooting.
View 1 Replies
View Related
Mar 5, 2014
I have the Samsung Galaxy Tab 3, 7" (WIFI-ONLY).
Firstly, let's start by saying that I ended up rooting it after a while because it got boring having the simple, unmodified android.
It seems creativity got the best of me, and I ended up wanting to switch back to my normal android days. The problems started when I looked for the ways to upgrade my device, and it sais my device had been modified (rooted). So then I tried deleting SuperSU, thinking that would unroot, but nope... I then went to my great friend, we all know as Google. I then found the firmware, however didn't notice it said 3G, not just WIFI.... and loaded it onto my tablet following the instructions leading me to use Odin. I now have a Samsung Galaxy Tab 3 WIFI only, with 3G Firmware.
After countless hours, days, and now weeks of trying to get it back to the normal firmware, all my attempts result in an error on Odin, and here's what I get:
First, I just load the .md5 file, and this happens.
---
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T210XXAMK5_T210OLBAMK1_T210XXAMK5_HOME.tar.md5 is valid.
[Code] ....
Now, what do I do to get my precious tablet back to normal? , since I have the 3G version, I'm required to have a sim card which I can't put in because there's no sim card slot (it's a WIFI tab). I can't even use WiFi, because it won't turn on without a SimCard.
View 2 Replies
View Related
Nov 8, 2010
I want to flash my phone back to android 2.1. My phone is in download mode but odin is not picking it up?
View 3 Replies
View Related
Aug 1, 2013
Is there a way to block access to browsers? I would like the user of a Samsung galaxy Pocket (version 4.0.4) to be able to access one browser only.
The browser in use has a blacklist filter which block websites, but indeed you can easily bypass it by installing a new browser.
My past attempts: I have searched for a long time but could not find anything that worked. The browsers I have found which can block other browsers are not compatible with this device.
I have also searched for alternative ways of blocking websites though a blacklist but all of those solutions require rooting the device, which I do not have enough technical confidence to do.
Blocking Play store is not either an option since you would be able to install new browsers in other ways.
View 3 Replies
View Related
Aug 11, 2013
I looked all around google and I could not find a way to root it except for the OneClickRoot thing but it failed. How to root it?
View 1 Replies
View Related
May 28, 2013
Is there a way to root Samsung galaxy pocket duos GT-S5303 . Android version : 4.0.4
View 9 Replies
View Related
Jul 11, 2012
I bought my Galaxy Ace S5830i last month. I hadn't installed Samsung Kies until yesterday, when I launched it it prompted a firmware upgrade. First I tried to use kies to upgrade but whenever the upgrade process started (Kies started downloading the firmware files) my device automatically got disconnected..I tried reinstalling kies, restarting my phone but nothing worked.
I then decided to use odin(v1.87) to flash the firmware on my device but it kept failing at first step itself. Here's what it said :-
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830iXXLF3_S5830iODDLF1_RST_S5830iDDLF1_HOME.tar. md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
[Code] .....
The phone has been working as fine as ever. Kies never got to the step of INSTALLING the new firmware as whenever it started downloading the firmware files my phone got disconnected so no damage there.
With ODIN I entered download mode but here too it fails at the beginning, so I just switch off my phone and restart it and it works as if nothing ever happened (I've made several attempts)
View 1 Replies
View Related
Feb 25, 2014
I have the Samsung Galaxy Tab 3, 7" (WIFI-ONLY).
Firstly, let's start by saying that I ended up rooting it after a while because it got boring having the simple, unmodified android.
It seems creativity got the best of me, and I ended up wanting to switch back to my normal android days. The problems started when I looked for the ways to upgrade my device, and it sais my device had been modified (rooted). So then I tried deleting SuperSU, thinking that would unroot, but nope... I then went to my great friend, we all know as Google. I then found the firmware, however didn't notice it said 3G, not just WIFI.... and loaded it onto my tablet following the instructions leading me to use Odin. I now have a Samsung Galaxy Tab 3 WIFI only, with 3G Firmware.
After countless hours, days, and now weeks of trying to get it back to the normal firmware, all my attempts result in an error on Odin, and here's what I get:
First, I just load the .md5 file, and this happens.
---
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..[code]....
Now, what do I do to get my precious tablet back to normal? , since I have the 3G version, I'm required to have a sim card which I can't put in because there's no sim card slot (it's a WIFI tab). I can't even use WiFi, because it won't turn on without a SimCard.
View 5 Replies
View Related
Sep 14, 2013
odin cant can recognize my s1. the yellow thing doesn't show up when i connect my phone. and when i try to make i in download mode,my phone just show the photo in the attachment i gve you.
View 2 Replies
View Related
Nov 30, 2013
I've read a lot of topics in online and also saw a lot of video tutorial to Flash my Galaxy Y's stock ROM with odin.In Odin,I've selected every file but whenever I click 'Start' button,it shows me this message in message box.
<ID:0/010>Added!!
<ID:0/010>Odin v.3 engine (ID:10)..
<ID:0/010>File analysis..
<ID:0/010>SetupConnection..
But I can't flash my phone.Now what can I do?
View 4 Replies
View Related
Nov 7, 2013
[URL] .... I tried flashing via odin and recover back my device using the shown link. I got the following error as shown in image. And i am not able to install any custom rom also. Every time i do get stuck on the logo of the device. And when i remove battery it gets back to the normal recovery mode. What shall i do now the device is bricked and i cannot get it back.
View 1 Replies
View Related
Apr 4, 2012
Samsung Galaxy Tab GT-P1010 no display got stuck in ODIN while upgrading to GB
View 2 Replies
View Related
Jul 3, 2013
How is it I had the kind of mobile Samsung Galaxy S2 GT-I9100G.
I wanted to install ROM through the program odin mobile and knee after installing version fails the device is to comment on the Samsung logo, which is in the type of device and I will open Recovery Mode I could not and I want Open Download Mode opens to I was not recognized on the device.
View 2 Replies
View Related
Apr 20, 2014
I'm following step by step process to root my gt-s5310 using ODIN 3.07. Started from download mode and connect to the PC is no problem at all. ODIN finished with the GREEN PASS. When I tried to open recovery mode, only android recovery mode is open(but malfunctioning, going no where when I press the home button) that recovery mode also don't has "install zip from sd card" option.
My android version is 4.1.2 . Baseband version S5310DXAME2. Kernel version 3.0.15-1521875 se.infra@SWDA2309#1
Attached is the recovery mode picture
View 5 Replies
View Related
Apr 28, 2014
I am currently trying to repair a soft bricked(stuck in boot loop) Samsung Galaxy S2 (T-Mobile) . I am trying to save the info (contacts,sms,pictures..etc). Would using Odin to flash CWM Recovery and doing a nandroid backup and then restoring the phone to factory settings. Would it somehow save everything in the internal memory and fix the phone?
View 2 Replies
View Related
Dec 4, 2012
I am having a problem with my galaxy pocket. Whenever I shutdown the phone, the screen goes black then after a while it goes into this screen:
[see attached file]
My phone is rooted.
View 9 Replies
View Related
