I have flashed my x10a with flashtool and x10_2.3_aro_2.ftf firmware. But after the flashing is finished, my phone screen touch is not working. What can I do now? I am unable to install xrecovery to install another rom bcoz screen touch isn't working. So I can't install any custom ROM.
View 2 Replies
i got a brand new S3 In december 2013 , i dropped it an it broke ( both touch and LCD ) I got them replaced by a authorized service . It worked fine 2 months , Two days ago some problem appeared, Touch screen stopped working propperly , it worked only for short periods of time. Now if i press really hard on the right hand corner (Above the return arrow) it works Perfectly ( as long as i keep my finger there) but sometimes it works fine after reboot but in the end it stops (No signs of cracks or damage) , i had CM11. What i've done until now :
-Deleted CM11 and added 4.1.2
-Took it appart and checked the ribbon ( fine)
-Hard reset
- Dummy file generator
Everything works on it buttons ,Before the freezing screen flashes a bit .
I tried to install a custom ROM and i failed, so i had to flash a Stock ROM again. After i downloaded the packaged and flashed it using Odin. The touch is not working !
View 1 Replies View RelatedI bought LG VU II (F200L) in perfectly working condition, it almost new. After installing LG PC suite and connecting it said new firmware update is available so I proceeded which was done successfully but since then touch screen is not working properly.
Usually it responds ok but main issue is back button is not working anymore, and sometimes when I press power button to unlock screen it responds very weird and not so responsive as well as sometimes doesnt responds or opens apps that I havent even clicked.
I tried to restore, emergency restore, LG Flash tools and used correct KDZ files to flash roms successfully but nothing seems to resolve this issue.
Yesterday I was having fun trying out the secret codes (like *#*#4636#*#*) and tried out the touch screen code. Then clicked on update (firmware).
Then the touch was not working. I tried taking out battery and putting it back on. Tried factory reset after backing up data with Kies. Tried rooting the simplest way. Tried to flash using Odin with a recovery and pit file. Still nothing is working.
So I did a water test on my Moto G the other day because it's supposed to be "water resistant." It survived the first day of the water test, but the next day, the touch screen isn't working.
View 5 Replies View RelatedI have been using a trusty U8120 for a while now with Fresh Zodiac Fruit Rom. I was browsing on it last night and then next day the screen was just inoperable. Sometimes it would "take" some input, but it would understand something different (e.g. on a keypad, touch it in the middle "5" and it understands top right "3", but then again, "3" doesn't register either).
Here's the funny thing: it doesn't take any input whatsoever, but, if the screen is about to idle shut down and I touch it, it goes back on full light, meaning it understands the touch.. what the..?
I tried reinstalling the firmware but nothing happened.
My screen has recently stopped vibrating when I touch it. It will happen as I am typing a text message. sometimes it will begin the vibrating again before I finish the message, sometimes I will play on the phone for a few minutes before it randomly comes back.
View 1 Replies View RelatedMy galaxy s2's screen has occasionally stopped responding, the os was still running and everything so it wasnt frozen, my touch screen just simply stopped working. Only way to fix it was to hit the back of the phone and do a battery reset. This issue started poping up more and more, and now it won't respond.
Model: GT-I9100M
No custom roms/kernels have ever been installed, has always run off the stock. Never been dropped or had water on it (I took very good care of it).
The nav bar at the bottom (back/search/options/menue) and hardware buttons all work. Everything above the screen no longer works.
What iv done: I've reset the phone, did a bettery pull for the night, fully charged it, looked at the board and checked all the connections (all good). Would flashing a custom rom/kernel be something to try next? Why would the bottom nav bar work but no the rest of the screen? Could it be locked somehow? If it is.. how would I unlock it?
Was playing with the touch to take feature on my DI, when suddenly the camera started displaying flashing red and blue screen. Not sure what happened there. Battery out resets did not fix it. I did a complete data reset and it returned to normal. Anyone else experience this?
View 1 Replies View RelatedI have new firmware on PC for my Samsung phone, intended for flashing with Odin (i have PHONE, CSC and PIT files). My question here is, is it possible to root this firmware before flashing it. The case is, my phone is now rooted and I don't want to loose root access, but I would like to flash this new firmware, cause with this one i have occasional problems (force close of apps, freezes, loosing wifi connection, etc). I've searched every where but haven't found anything. Only Mobile Odin have such options, but my phone is not supported yet.
View 1 Replies View RelatedI have an Huawei Ascend y210d on which I installed CWM recovery. After that I installed a custom ROM, but now I want to flash its official firmware.But its official firmware is not installing. It got told using Huawei firmware Indian version downloaded from Huawei. I am using this procedure:
(1)First copy dload (in dload folder update.app file is present) folder to the root of the SDcard
(2)Then turn off your device pick out battery then again insert battery
(3)Then press buttons volumeup+volumedown+powerbutton
(4)Then its start unpacking the update package But in step 2 it failed on installing.
This is the error.log I get in SD Card :
{filename = /mmc1/dload/update.app
call RCV_MODULE_END_EVENT failed,module = OEMSBL_VER_LIST
CMD=0xf,moduleaddr = 0xf0000000, len_tmp=0x2c54
filename = /mmc1/dload/update.app}
What can I do to get this fixed?
My cute galaxy ace was dead after flashing the wrong firmware by accedent (galaxy 551 firmware) now i'm not able to enter the download mode when i try to boot it on it just turns on the two virtual buttons, any way to flash to flash without entering to download mode or using another program ??
View 2 Replies View Relatedi was trying to unbrick my old cliq by flashing the original firmware and it failed idk why and it wont dectect it any more and the phone has a black screen and only the keys light up any way to save my old cliq??
View 2 Replies View Relatedis it possible to unlock samsung galaxy s plus (i9001) by installing any of the moded firmwares/kernels?
View 1 Replies View RelatedWhen you flash any custom ROM, sometimes there is a problem with setup wizard! When you choose any language in Setup wizard it gives "Unfortunately setup wizard has stopped" when you press OK, problem comes again?
When you are in Setup wizard don't touch anything! Then one after another clockwise since the left top corner, press the most top left corner, then the most top right corner, then the bottom right corner, and at the end the bottom left corner!
i'm using lg l3 e400 ! actually my went in boot loop ,so it ws unable to start then i flashed kdz V10L(as i'm from india ). then my phone sarted normally!but the main problem is that now i tired to root my phone so many times but always and error comes link failed permission denied !!so i think that after flashing orginal kdz flash (stock rom )kdz V10L we are unable to root !!
View 5 Replies View RelatedI'm trying to flash TSP (Touch Firmware in my device I9305 galaxy S3.
I call Keystring_factory.apk with key *#2463# but a windows when try to open the is closed.
The same think happend when i call the app from adb with
Quote:
su -c 'am start -n com.sec.android.app.factorymode/com.sec.android.app.status.touch_firmware'
Is anyway i can force flash the touch firmware without read anything else to the device?Any way i can call the button TSP FW update (kernel) with adb directly?
[URL]
I make a mistake and flash N7105 boot.img to my device as i test somethinks so now my touch doesn't work.
I give you the decompiled Keystring_factory.apk.
I have the device for 17 days and i know i can restore all thinks and go to Samsung Service center but i dont whant to do that on a new device.
I'm having problem with my Hero since I updated to [ROM][2.3.5] Zero Hero Sense 3.5 RC1. It runs so slow and and error always flash that says:"The application Touch Input (process com.htc.android.htcime) has stopped unexpectedly. Please try again."
View 2 Replies View RelatedMy EVO has been answering phone calls in my pocket. I've even "butt dialed" a couple of people when I forgot to turn of the screen before sticking it in the pocket.
If I forget to turn off the screen, that's my fault, but the screen turns itself on when the phone rings.
How the heck is a capacitive screen working through fabric, anyway?
Went into test mode to check out the battery. And through my curiosity went into the 'touch-fw update', and now I can't use my phone. I have the touchscreen lock so can't unlock it, otherwise maybe I could use the keyboard or the optical joystick to use the phone. Is there any way to fix this? I might attempt a hard reset, but saw on another forum, that it's unfixable. I bought it at Best Buy and they aren't even open tomorrow, would another Best Buy or Sprint store exchange it if I can't fix it?
View 5 Replies View RelatedI've had the Evo since the release day and I loved it, greatest phone ever in my opinion. Well about two weeks ago, something happened and it broke, yeah it was my fault but i'd rather not talk about it. So I decided to upgrade to the Epic 4G, I found one and bought one last week. I immediately fell in love with that phone. Now here's the worst part, the same day I buy the phone it breaks. I accidentally dropped it from a height of around 1 feet onto my sink. The inner screen shatters but the outside glass is perfectly fine. I couldn't believe it. I believe that the new Super AMOLED screen is very fragile because I've dropped the Evo hundreds of times and nothing ever happened. I then decided to switch back to the Evo and ordered a replacement phone after a difficult process. Yesterday, I received the replacement Evo. Well I immediately notice it's refurbished and it doesn't seem to bother me. It turns on fine the first time and I proceed to activate it. First, the touch screen is not working at all. Only a few sections of the screen work even after full resets and calibrations. The phone then dies and never turns on ever again, I've tried different batteries and chargers but no luck.
View 15 Replies View RelatedMorning, I dropped my HTC Hero yesterday, and although it has a tough silicon case on it unfortunately the screen has cracked top right. At first I thought it was a hair on my screen, but hairs normally blow away So you can get an idea of how thin this crack it. It goes from top left to center left.
While this doesn't seem to have had any impact on the use of the phone (for example, touch sensitivity still works in that area and the screen is perfectly usable) I'd like to replace it.
Now this phone is under a business contract account with Orange UK, but if my employer doesn't have insurance for it what options are there to replace it? I've seen there are 2 parts, the actual LCD screen and then the touch overlay on the top. I don't believe the LCD screen is damaged since it would be far worse, it just looks like the glass has cracked. Can this be replaced?
This may be an Android 4.4 or Nexus 4 problem, but I suspect the former. I encrypted the device (using the in-built encryption stuff) and have found that now the touchscreen will only register if another part of it is touched. For example, when entering my PIN once I get into the OS itself, I have to hold down a finger somewhere else on the screen (usually having to move it between some of the later numbers).
When it comes to multi-touch features (zooming etc.), these work fine but still require another finger held down somewhere to work.
This is definitely a software problem as the touchscreen works fine when putting in the password to decrypt storage.
Is this supposed to happen - part of the encryption process - or is this a bug?
I've had my Xperia X1 since christmas 2008, About 2 weeks ago while i was writing a text and the screen went blank so i just thought my battery had gone. when i got home i put it on charge over night and when i got up in morning i tried turning it on and nothing happened (i mean that little vibrate it dones when it switches on), so i took the battery out for 5 minutes then put it back in and tried again and it did that vibrate thing but nothing came up on screen but then someone started ringing me (still nothing on screen) and when i pressed button to answer it, it wouldn't answer and kept on ringing. I've tried updating the software from my laptop and i think it updated it but i couldn't tell because i can't see anything lol but it's still the same. i haven't dropped it or anything so i haven't got a clue why it's suddenly stopped working.....
View 3 Replies View Relatedtouch screen not working on 7 inch pad. Have done a factory reset and of course wiped everything clean to start new but no luck.
how to fix a non-responsive touch pad? Would hate to throw away a perfectly good pad!
Sometimes the three touch screen tabs at the bottom of the screen ,just stop working ,i can move between home screens and all other touch screen icons work,but not the three at the bottom,then suddenly they will respond Anyone else had this?,i have not installed any apps for a while so i dont think it is an app causing it.
View 2 Replies View RelatedAlmost every day when I wake up I check my phone and 9 times out of 10 the touch screen does not work. I cannot make a call or check anything. I have to push a lot of buttons and take out the battery and generally wait a while before my expensive phone to start to work. Is there a fix for this? I've already had to go to sprit to do a hard reset because the phone got, "kicked off the network" for some reason the sprint people could not explain. Any solution for the screen issue?
View 4 Replies View RelatedI've read about a possible grounding issue with the some screens, but I haven't read about the issue I'm having. Randomly the touchscreen will stop working... It doesn't matter what I have open it will just stop working. The system is still running, calendar alerts will pop up, and the time will still advance, but I can't do anything with the phone and have to pull the battery and force a reboot to get the screen to respond. I initially thought maybe it was an app, but this has happened with nothing running except the default apps.
View 3 Replies View RelatedBut now whenever I'm taking a call the touch screen stops working, so the only way for me to hang up is to take the battery out.Has anyone else had the same problem and is their anything I can do to fix this?
View 3 Replies View Related