General :: White Screen With HTC Logo After Attempting ICS Update On Sensation 4G
Apr 21, 2012
So I decided to upgrade the rom on my tmobile us sensation 4g and now it is stuck on the white screen with the green htc logo. Here are the steps that I took...
Download and run HTCSupertoolv3, run "root" option, run "attempt s-off and everything else" option - go through this process by getting key and submitting code to get update.bin file and then finish
Boot to recovery, phone says Unlocked at top
Download and run android recovery manager - flash clockworkmod5 on phone
Copy ordroid for sensation zip to sd card, boot to recovery, select zip file, go through installer - shows success
boot phone - white screen with htc logo
boot into recovery - wipe cache
white screen with htc logo, learn that I need latest firmware (3.3.2) for rom to work
copy pg58img.zip to sd card, do not modify file- boot into recovery, phone says parsing pg58img.zip - then nothing, no prompts or continue
boot phone - WHITE SCREEN WITH HTC LOGO
View 2 Replies
Nov 6, 2013
i get an white screen in place of recovery after flashing recovery.img file to the device
View 1 Replies
View Related
Feb 3, 2013
I have an unlocked HTC Sensation and when i updated it when it was rebooting it got stuck at the htc screen for ages soo i took the battery out and now it gets stuck at the boot screen with the htc on it I Really am unclear
View 1 Replies
View Related
Mar 25, 2010
I was messing around with the camera and suddenly it goes to the White Screen with the Motorola logo in the middle. Its just stuck there. I've pulled the battery for at least 30 minutes, tried holding down, up, camera, while turning the phone on, no luck. Every time I power it up its just the same white screen. It's doing nothing. Are there any other manual methods of resetting this thing?
View 6 Replies
View Related
Apr 5, 2012
I have an HTC Evo 3D with boot v1.50 (unlocked using the official HTC device method successfully) TWERP v2.0.0 (the touch style recovery). I have "successfully" installed the MikRunny v1.13 CDMA ROM but I am stuck in the white HTC splash screen. I did not back up my original stock ROM (the worst mistake ever.) But I have wiped everything (except the / SD card/ portion of my external card) each time I try to flash a .zip ROM.
View 6 Replies
View Related
May 16, 2010
After the update was complete, I got a white screen with red letters at the top that says "Cannot find jpg or png!" and now the phone won't work. I cannot redo the update because it loses connection with it after the 2nd powercycle in the update. Is there a way to fix this?
View 1 Replies
View Related
Mar 22, 2012
I am trying to install sensation 3.3.401 but after i go to recovery and apply update from SD card it gives me E:signature verification failed installation aborted. It does nothing when i wipe cache or factory reset.when I reboot or turn on my phone it pops the HTC logo followed by another HTC logo and a restart over and over again. In my Recovery Screen there is a message showing E: Can't open /cache/recovery/command.
And i have no toggle options in my recovery. just Reboot system now Apply update from SD card Wipe data/factory reset Wipe cache partition.
View 3 Replies
View Related
Oct 1, 2012
I am seeing an issue on my HTC Sensation when attempting to update Apps that I paid for in the Google Play Store. The exact message that I see when attempting to update these Apps is "Package File is Invalid".
Here is a bit of background to this issue -
1). My HTC Sensation has a custom ROM (Elegancia) installed, and I have now re-installed it (which is when these issues started).
2). I can install a ROM and update Apps through the Play Store just fine at the start
3). I install Titanium Backup and perform a restore (I have tried restoring only data & apps + data [starting from scratch and wiping the phone then installing the ROM again to test both scenarios])
4). Apps return to the state that they were in before I flashed the new ROM
However now whenever I attempt to update Apps I get the infamous "Package File Invalid" message ***
I have noticed when opening Titanium Backup that it alerts me that the "Android ID" has changed, it also gives two options, 1). Leave the new ID, 2). Restore the old ID
5). I tested the updating of Apps both whilst keeping the new "Android ID", and whilst restoring the old "Android ID", the ID (whilst I am sure is important) doesn't seem to affect whether or not Apps will update.
This issue only appears to be affecting Apps that I have purchased, and the Play Store still recognizes that I have purchased the Apps.
View 10 Replies
View Related
Apr 30, 2012
I have updated Sensation Xl to ICS 4.0.3 from sensation xl tips, after updated Sdcard was error and adb server not works so i can not restore or flash Rom?
View 3 Replies
View Related
May 27, 2013
I have installed CM10 4.2.1 ROM on HTC sensation, But after some time, the screen starts blinking, and only stops if i restart the phone.
View 4 Replies
View Related
May 12, 2012
I have rooted HTC sensation xe (Hboot 1.27, ICS 4.0.3, S-On). Tried installing custom ROMs. It installs but when I reboot from recovery, it gets stuck on home screen (white background with HTC). Tried Virtuous Inquisition and MIUI bit same problem.P.S. I am a rookie and read that it could be due to S-On even if rooted.
View 2 Replies
View Related
Aug 22, 2010
I don't know what im doing wrong but while trying to update my cousins radio last night, after going to recovery the update.zip does not show up. The phone is not rooted and I di follow the directions for those who did not root but after going to recovery the directions say to press power and the volume up button but it just takes me.to the first portion of that screen.
View 3 Replies
View Related
Apr 29, 2014
i have tried to install kitkat version for galaxy y duos s6102,for that i installed clockwork mod n cynogenmod n kitkat file..but after installing the screen goes blank,nothing appears except Samsung logo screen,
View 2 Replies
View Related
Dec 1, 2010
When I select the software update option from settings, to see if there are any ATT firmware updates, I get an error message that the phone is unable to connect with ATT servers. I have been getting this error each time I have tried it for the last several weeks.
View 20 Replies
View Related
Apr 28, 2010
I have not really found any threads in these forums deticated just to overclocking the Droid. I am running BB v.9 and would like to overclock past 600 mhz. I have 2 overclocking utilities. (Setcpu, and overclock widget) I understand that I have to update or flash the Kernel. I tried doing this OverClocking Motorola Droid To 1.3 GHz In 7 Easy Steps | areacellphone.com
The adb commands were successfull. WHen I rebooted my droid it was bricked (well not really cause I did a Nandroid backup right before I did this) It was just frozen with the white Motorola logo. Perhaps I downloaded a bad 800 mhz evilboot8.img.
View 8 Replies
View Related
Feb 21, 2012
I have the zte Carl. I can't do a factory reset .every time I try, the result is a white screen on reboot and stuck there. I tried to do hard reset but still got white screen. the basic problem is that both home and dial button not working so I want to do a reset. I cannot even get my phone into recovery mode. white screen again. if.
View 1 Replies
View Related
Jun 28, 2013
My karbonn A1+ stucked on Logo screen.i tried to hard reset by pressing the volume down key and power button but nothing comes up then i put the set on charger the phone gets on but again stucked on logo screen..do i need to reflash but how do i ? the phone is not getting on recovery mode. isn't there a way to attach the mobile too pc and then reflash?
View 2 Replies
View Related
Sep 6, 2013
I have htc one 801e asia stuck on htc logo i tried to push zip rom in all way but cant make it work i search a lot for ruu but cant find. give me a linke to download the official ruu exe for htc one 801e
View 1 Replies
View Related
Dec 6, 2012
I never rooted my phone before and thought i would give it a try(SuperOneClick) and it went fine. Then I decided to use Clockwork to install a mod (cyanogen) and cleared everything i needed to, but after it reset it locked on the logo, the LG with a blue swipe behind it, and thats all i get. I tried putting it into APX mode, but my volume buttons wont respond.
View 2 Replies
View Related
Apr 10, 2014
2 weeks ago i bought My GT-S7262 I was Flash My new firmware for My device (GT-S7262). And Pass Text Show On Odin 3.07. But, When go to recovery Mode Android Build in (3e) shown
E:missing bitmap icon_att_fota_installing and much more
When I flash CWM for S7262. The screen gooes white. i cannot root my phone .
View 3 Replies
View Related
Apr 25, 2012
Recently I flashed to this ROM [URL] .... from a stock ROM. Have done it a few times before and no problems have occurred. It's an MIUI rom and I decided to customize the theme a little. The themes section allows to change most of the detail ie fonts, status bar, home screen, lock screen, icons, boot animation.
And that's where it started, when I changed the boot animation, instead of using the default one. When I did a reboot after the switch, the usual boot logo was up, but then the screen turned pixelated like a CRT monitor/damaged LCD screen with colourful pixels. But then in boot into the new animation all fine, and has been ok since. The device boots fine, but I'm worried about that pixelated screen.
View 3 Replies
View Related
Jul 7, 2012
I have a Motorola XOOM WIFI US version (don't remember exactly the Android version, but it's 3 point something). It was rooted and unlocked, but I decided to relock it, so I followed a tutorial to do it.
Everything worked fine and, despite the long process and the several steps, I didn't have any problems at all, but when I finished flashing the images from the usb, the tablet automatically rebooted and now it's stuck at the boot screen, with the Motorola logo.
I have read some topics with the same issue and I always see the same solution: go into the recovery mode, but the problem is that I can't even access the recovery mode. When I push the vol + button to select the "recovery" option, I just got a message "Reading ODM fuse: 1", and there's nothing else I can do. I can't even shut the tablet down.
View 1 Replies
View Related
Mar 26, 2013
i tried to upgrade android ics 4.0.4 to jb 4.1.2 (cm 10), the installation went well,but when i tried to reboot i got stuck on the logo screen for a few seconds and then it turned off.i tried for a few times and it's always the same..
View 1 Replies
View Related
Nov 26, 2013
I recently brought an ALPS i5 (fake iPhone 5) from Malaysia. I mistakenly flashed a Goophone ROM on this device and now I have a blank white screen (back lit) if I try to power on or enter recovery mode. SP Tool does not detect it..there is no system buzz indicating device is connected..nothing...
All my MTK drivers are correctly installed (I tried another MTK device) but it seems like the PC is not detecting my phone.
What do I do?
View 3 Replies
View Related
May 1, 2013
the last week i've flashed a new rom on my Haipai i9377 and the screen now it's totally white with a coloured pixel on the screen. i've tryed to flash another rom, but i don't know why the problem is not solved. When i switch on the phone, i can hear the sounds, but without a working screen, i can't use the phone. in attachment you'll find a photo of the screen.
View 3 Replies
View Related
Aug 30, 2013
I tried to flash gtr 7.8.6 rom to lg optimus one phone according to the instructions but now it is stucked at the lg logo screen.
View 2 Replies
View Related
Jul 24, 2012
I was following instructions to flash the Criskelo v7 rom on my Galaxy Note N7000
First time with Android rooting ...... it told me to flash Abyss Kernel and after this do a wipe . Abyss did not load right and i did wipe
OK .... this is my first android and first time on rooting.............. i made a mess i guess
Now the phone does not go back to CWM recovery and can only go into download mode . I have downloaded ODIN 1.85
Also before doing all this i have created a Nandroid back up with CWM.
View 3 Replies
View Related
Mar 22, 2014
I've a two month old Haier W910 with stock ROM. The other day, when switching on the phone, the device displayed white snow. The device function normally - touch screen, audio, wireless and cellular (accept calls) but the screen continue to show white snow (like old analog TV).
I found a youtube video showing the same symptom and one of the comments suggested that the phone need to re-flash ROM and it will solve the problem. The youtube video posted confirmed that it did. Since then and for the past 3-4 days I've been trying to flash my phone but it doesn't work. I'm able to put the phone in "Download mode" and use fastboot to flash a recovery boot, oem unlock works but I can't seems to reflash full ROM: I can't use the "update.zip" method as a I can't see the screen and when I try to flash different ROMs under www.needrom.dom using 'fastboot update' it keep saying:
archive does not contain 'android-info.txt'
archive does not contain 'android-product.txt'
error: update package has no android-info.txt or android-product.txt
I can't flash the rom in "recovery mode" as I can't see the menu and select the proper option.
I guess I also need to replace the bootloader as the screen is white snow from the very beginning..
So the question is: how can I do a device full reflash WITHOUT using the screen (preferably in fastboot)
View 1 Replies
View Related
Nov 14, 2012
A few months ago I bought two N8000 phones and I was glad they came with full Hebrew menus. But now I bought a device that came without Hebrew.
So I tried to update the version with this method bm-smartphone-reviews.blogspot.it/2012/05/mt6575-flashing-tutorial.html#comment-form
And now the device turns on and works, but the screen remains blank white.
I saw on the forum that people have asked for the problem and you told them they have to replace the DSP_BL file and reflash
The problem is that the links are broken and I can not find the appropriate version for me.
I have tried full and partial update with many versions:12.06.12 firmware.rar
20120705_e1808_v75_jbl1.zip
I downloaded also this tool SP_MDT software fot flashing.rar But I was unable use it
I downloaded also this two packages, (Taiwan101_STAR-N8000_V.05-1.zip + Taiwan101_STAR-N8000_ICS_V.09.zip) but they are not suitable for use with SP Flash Tool v3.1216.05 (they not have scatter.txt file)
View 1 Replies
View Related
Dec 7, 2013
Samsung GT-I8260 Galaxy core
1) Samsung logo stuck screen
2) Recovery will only work when plugged with a usb cable to my computer
3) Did factory reset/wipe data cache/everything still samsung logo stuck
4) Kies 2.0 wont recognize the phone i think it has something to do with battery charger option turned on when you plug it with a usb(i remember from a thread someone said if you have it to charge when you plug it to your pc it wont work)
So is there any way i can still make my phone back to work?I tried with the pull battery off charge it and not working..Is the kies problem because of a bad usb cable?should i get another one?I was running officcial rom no custom rom just rooted the device
View 4 Replies
View Related
