General :: Black Screen After Flashing Source-built CM10 ROM?
Mar 15, 2013
Trying to get CM10 built for the Samsung Galaxy Reverb. It's building just fine, but no matter what we try it WILL NOT BOOT. We get a black (backlit) screen after the Samsung logo and nothing more.
I've tried flashing the stock boot.img over the rom, building and flashing the stock kernel seperately (that boots the stock rom just fine when flashed but won't boot CM10), and tried modding the ramdisk to boot, but nothing is working.
I've looked at other MSM7x30 devices to find if I'm missing anything, but I can't find anything that I don't have in the device folder.
Here's the device repo: [URL] ......
View 5 Replies
Jan 9, 2013
My Samsung Galaxy Reverb has nobody willing to build CM10 for it, so I decided to take on the task. It built without error - processed the kernel and all the CyanogenMod 10 files just fine and generated the .zip. However, after flashing the .zip I end up with a Samsung logo, then a black screen.
The compile went through without error, so I'm a little lost as to what I should check next. From doing a little searching it seems the kernel is at fault, but what to do about that. Am I supposed to flash the kernel separate from the .zip that the CM builder outputs?
View 4 Replies
View Related
Mar 28, 2013
I was following this guide to upgrade my Sanei n10: [URL] In recovery mode I have installed the rom.zip, but after I pressed the wrong button and it turned off. Now, when I turn it on, leave the writing sanei and after few second remains on black screen.
If I try to entry in recovery mode with the vol+ button, it remains with the Android robot lying down with a red tiangolo, with no options.
What can I do to recover my tablet?
View 9 Replies
View Related
Jan 24, 2013
First off, I have been running Ubuntu 12.04 x64 (OpenJDK) for a while now, and build regularly for Grouper and d2usc (US Cellular SGS3 variant). Grouper builds fine, flashes fine, runs great. The d2usc also builds fine, flashes fine, but I get zero radio; no bars of any color, Settings - Status reports Unknown Baseband version, same with IMEI and MEID, not even showing grey roaming bars.
This has been going on for about 1-2 weeks now. Zero build errors, the "brunch d2usc" command works great, creates a flashable zip, and the zip flashes. I have to then wipe everything in TWRP, and restore a backup (I do NOT have to do adb nv restore or anything, radio works just fine when restoring backup for Black Bean 7).
Here's what I've tried:
1. Delete entire repo, create new folder and resync. After resync, build. Flash build (again, zero errors), same result.
2. Delete entire repo again, create new folder and resync. After resync, run ./get-prebuilts AND ./extract-files.sh while running official d2usc CM10.1 nightly. Rebuild (zero errors), same result.
At this point I'm at a loss, Grouper (N7) flashes and works great (obviously wifi only version). The d2usc version works great minus the fact that I get no radio, not even roaming. I've tried the CDMA subscription thing, rebooting, and no dice still.
It is much easier for me (saves time, etc) to do my personal theming THEN building, so I'm not doing things twice (using apktool to decompile/compile).
View 2 Replies
View Related
Jan 17, 2013
I have lately flashed CM10.1 nightly on my GT-I9300 and am experiencing high battery drain (twice-three times what I had before), and get over 1%/h over the night when all is turned off.I have read a lot about fast battery drain reasons, but couldn't find an answer to mine.I've downloaded better battery stats to check for any abnormal activity, but it seems normal to me (dump attached).
Note, I've installed the cm10.1 straight from my internal memory and I do not have an external SD card.Also, from the dump file it seems that the phone was mostly in deep sleep mode and I see no reason then why it wouldn't just drain at 1-2% per 8h.
View 4 Replies
View Related
Sep 22, 2010
After buying a HTC Desire in August, I've been very happy with it. The best phone I have ever owned. And after rooting it and installing LeeDroid's 1.9a ROM, I've been enjoying the tweaks and a2sd+. Anyway, I have a Telus Desire which I unlocked and am using with Fido. I followed this guide to root and this to install the LeeDroid ROM.
Ever since then, however, I have not been flash any new ROMs. When I flash a new ROM using ROM Manager, it goes to the white screen with the HTC in green then the screen/phone just shuts off becoming unresponsive until I take the battery out then in again. When I open ROM Manager, it gives me a pop-up that says "Recovery Failure" with three lines which say:
- Recovery mode is "broken".
- ROM Manager doesn't reboot.
- Other.
I tried to reload the clockwork recovery using ROM Manager and Unrevoked. Didn't seem to fix the issue. There is an official OTA update that I couldn't install due to the same issue. If you have any input as to how I should fix this issue
View 12 Replies
View Related
Jun 11, 2009
Is there anyone out there that could send me the source for the built in SMS client? Since we can not intercept outgoing SMS i need to write my own copy of the SMS client to do be able to capture SMS replies.The problem is i am having a lot of trouble trying to find a way to access the SMS client source on windows. If anyone can send me or give me a link to a file containing the source I would be very greatful.
View 2 Replies
View Related
Dec 10, 2012
Is it possible to call screen of cm10 or 10.1 can appear more like miui call screen? I mean transparent. The default caller screen of cm10 is not good. Caller photo almost covered by black screen. You can't see the photo. In miui the caller screen is fully transparent it looks damn nice. So is there any modified apk or any way to make it transparent? Other than using third party app.
View 2 Replies
View Related
May 27, 2013
I have installed CM10 4.2.1 ROM on HTC sensation, But after some time, the screen starts blinking, and only stops if i restart the phone.
View 4 Replies
View Related
Jul 25, 2009
I built Phone.apk from the source code, and the resulting application could not find a carrier. I suspect that there are specific target builds required here (note that I DID add "TARGET_PRODUCT := htc_dream" as required to the Makefile), but there are no other vendors available under the Vendor folder in the source (i.e., T- Mobile, etc). Am I off base? Should Phone.apk be able to work on our HTC dream phones without additonal modifications?
View 3 Replies
View Related
Jan 20, 2009
I want to ask a question about the android source code - after building the code how and where can I test the built version, and what files that I need from the built version.
View 2 Replies
View Related
May 1, 2009
We've rebuilt a couple of our apps with the 1.5 SDK (but targeting 1.1).
The Market seems to have a bit of trouble with the background of the icons. They appear correctly (with transparent backgrounds) on the desktop, and they appear correctly when the app is downloaded from the Market and installed on the device.
However, they appear on black (not transparent) backgrounds in the Market uploader web page, and in the Market application on the device.
It looks to me as though the Market has a problem when it extracts the icon from the .apk at upload time, with .apks built by the 1.5 SDK.
View 2 Replies
View Related
Nov 27, 2013
I have done many of reverse engineering for other electronics in the past, Since Im new to android I was wondering before even wasting my time if is possible to port, or built a rom from sources or a phone thatis NOT External SD built in to a phone that it have the external sd built in.
Making it short can I try to reverse engineer the android code from a Nexus 5 (no ext_sd) to other device that have ext_sd built in?
If is possible where should I be looking to start trying making some development on this as I haven't done nothing close quite.
View 9 Replies
View Related
Aug 13, 2013
My HTC One X Plus fell down recently, and has got a ' triangle flag' like mark on the top left part of the screen. (But not on the Gorilla Screen). But each day, when I see it, the black mark getting disappeared , as forming lines in the triangle flag (the original screen getting viewed through the lines).
When I try the phone screenshot option, the complete screen is captured with no black mark on it.
When I contacted the service center, they asked me to replace the screen. That is very costly
Is it really needed to replace the screen or will it get disappeared eventually?
View 1 Replies
View Related
Aug 9, 2011
I am running cm7.03 with lordmodue6.7 on my htc inspire 4g. I just went to look at a video on youtube and noticed that their was no visual just audio. I uninstalled it then installed, but no luck. Afterwards i decided to check all other apps that play video like vevo and same problem. I uninstalled adobe flash player then installed it, but ALSO NO LUCK =[. I then checked youtune on my browser and same problem..
View 5 Replies
View Related
Apr 22, 2013
I Have a galaxy note 2 n7102 (Clone).I have rooted it 2 days ago.i have the android stock boot animation but when i added a custom boot animation, when i rebooted the screen goes black and then the phone starts up
I tried to put it in system/media and data/local and change boot animation and Samsung in system/bin and reboot but nothing happens.
View 9 Replies
View Related
Oct 8, 2013
My Galaxy S4 screen is just completely black. I can turn on my phone and even put in my pattern code on the screen, but it remains black. I have tried to reset it multiple times and I don't really know what to do. Any possible fix without having to get a repair.
View 3 Replies
View Related
Feb 28, 2013
I have an HTC Droid Incredible LTE 4 and for the most part it's fabulous...
But when I'm talking on the phone the screen goes black and if I try to unlock it to schedule something in my calendar, etc., the screen just goes black over and over and won't stay active long enough for me to unlock the screen. This is exceedingly frustrating since I can't use any apps when I'm on the phone, and I have to push the button on the top to get the screen to light up at all if I'm on the phone, it doesn't automatically light up if I take it away from my ear to look at something on my phone.
View 2 Replies
View Related
Feb 5, 2014
My Tablet shows black screen after a while animation android logo and no more work. So I tried factory reset. But factory reset doesn't proceed to recover menu. It shows only factory reset logo (Android logo with red triangle) like screenshot.
My tab has only 3 button (power, Volume up and down). I tried both of them. But the logo doesn't move. How to factory reset?
My tab Configuration:
Duocore M7200 7inch, 1.2GHz, 512MB DDR3
View 9 Replies
View Related
Jun 29, 2013
Samsung S3 Black-screen on startup?
View 2 Replies
View Related
Jan 11, 2014
I'm trying to build CWM for the HP Slate 7 Plus, but both touch and non-touch builds coming from the CWM Builder and manually built builds give a black screen with a few white lines when booted into recovery. The stock recovery.img I provided to the builder is valid because people were able to reflash the same recovery.img via Flashify with no issues, which is the same method used to flash the defunct CWM. I don't have the Slate 7 Plus, so I can't test things myself
The best I can do right now is debloat, deodex, and pre-root ROMs, as well as install more system apps.
View 4 Replies
View Related
Nov 2, 2012
! i was trying to install a new custom ROM ( C.A.M.P ) i had Cyanogenmod 10... i came to where i flash the new rom on my computer then when i wanted to fastboot reboot to install zip on phone, my computer shuts off, now when i turn my phone on it lights up black and stays like this and i cant do anything(no CWM no nothing) so i remove battery to turn off....
Phone:Xperia Arc S LTI8i
View 4 Replies
View Related
May 27, 2012
I flashed a rom then i went to flash gapps the bar was loading then it went off the screen and it didn't do anything.i waited about 5 mins and still nothing.i hit the power button and it shut off i go to turn it on and all there is a blue light where notifications show.black screen nothing else...
View 5 Replies
View Related
Dec 2, 2013
I have an issue with the chrome browser starting with a completely black screen. At first I thought it was only my last phone (RAZR HD), but the problem is also present on my Verizon Note 3. If it were just an issue on a single phone, I'd probably ask in specific phone forums, but it's happened on two different phones now.
I'm presuming that the problem might be caused by an app I'm using, but the problem is intermittent so I can't tell if the issue subsides when I uninstall certain apps.
View 4 Replies
View Related
Feb 11, 2013
I am trying to open fastboot screen in my arnova 7g3 tablet i pressed reset button and also pressed power button simultaneously but its showing black screen what should i do my tablet is rooted by superuser
View 1 Replies
View Related
Sep 6, 2013
1) How can I make my phone not turning on the screen when it is locked and i get an sms (via the built it messages app), but light the led light with a custom color (and of course, play a tone). I've tried "LightFlow" but it didn't work, the screen has still gone on when I got an sms.Mention that with 3rd party apps (e.g. whatsapp and wunderlist) the thing works great, the screen is black, the led is on, and the air molecules near the speaker start oscillating harmonically.
2) I know that even without any sdk manipulation, my phone still lets me move some downloaded apps to the sd. I had downloaded a 1.5 GB game and kept in mind that I use 3.5 GB of my internal storage. Luckily enough, this game is movable. I moved it to the sd card, and after the process had been done, I checked how much storage I use on my internal storage - 3.5 GB.The button changed to "Move to device storage" but it seemed that the game had not transfered at all.Mention that I tried the "adb shell pm setinstalllocation 2" thing, and it didn't fix it, so I reversed the process with the "adb shell pm setinstalllocation 0" command.
View 1 Replies
View Related
May 5, 2014
I try to install new rom (fixed rom) on thl t11.
After i go in recovery mode i go in button "wipe all data" and after " yes - wipe data for all users"
Now when i turn on my mobile (power button) i get only black screen,nothing alse.
My phone is not rooted,now i can't acces to recovery mode.
View 1 Replies
View Related
Jan 16, 2013
Anytime i am done using my phone it stays on unless i black it out by hitting the power button. shouldn't it do this automatically? If i get a text in the middle of the night it stays lit up killing my battery, how do i stop this?
View 1 Replies
View Related
Nov 24, 2012
I dropped my phone for the first time ever today, and there are cracks under the screen, and no picture whatsoever. Sounds and buttons still work, and I can turn the phone on and off, but the display remains utterly blank. I've pretty much written the phone off, there's probably nothing I can do for it. However, I would love to recover my pictures, contacts, and music from the phone. Is there any way I can do this without being able to see the phone display?
View 1 Replies
View Related
Dec 15, 2013
I recently bought Minecraft, downloaded Angry Birds Go and Injustice Gods Among Us on My Xperia E!
All the above when I start them they only show black screen with sound, I can click on things but no picture.
When Running Injustice Phone says, app is not responding , Wait or Close!
Injustce comes up with loading screen and the superman screen but after that it is a black screen!
I have tried rebooting, reinstalling, clearing all sorts and my phone is upto date!
I am also Running V6 Supercharger wich is awsome and makes my phone lag free!
Just once Minecraft started to work, when I deleted both folders in games > minecraft (On the SD Card).
View 1 Replies
View Related
