General :: Android Tablet Not Booting After Wrong CWM Install
Dec 5, 2013
I have an el-cheapo chinese 7" tablet with an Allwiner A20 dual core processor, which I bought off eBay (about tablet read "Wing", but that's about all I can remember).
It has a 512mb RAM and 4gb internal storage. I also have a 32gb TF card.
I thought (for some reason) that putting ClockWork Mod on would be a good idea, if I wanted to flash something like Ubuntu Touch, or CyanogenMod.Unfortunately, I hadn't reallised that the version of Clockwork Mod was not appropriate for this device, and booted to recovery.Needless to say, it didn't even make it that far... It'll only go as far as the very first logo, and no further.
View 7 Replies
Sep 29, 2012
It does not load past the android screen despite being plugged in for several hours. I have held the power button down, tried resetting it and pressing various other combinations of buttons at the same time. I put an SD card in it.
Android OS 2.2
Kernel 2.6.32
Build Number V1.5.2
View 3 Replies
View Related
Jul 22, 2013
i have a chinese tablet (Teclast P98HD A2Q6) with some very good specs it has 4.1.1 but it's laggy there's another tablet called (PIPO M6) with the same processor and display & it has 4.2.2 with the latest SDK for the chip.can i upgrade my tablet with PIPO's firmware ?
View 9 Replies
View Related
Jan 28, 2013
I have a A10 Chinese Tablet with no brand (called DesireTab) and no official firmware, I have try to install cwm with no success and after my tablet no more boot in android but only boot in cwm ... I have try to install ROM from other tablet but the only want to boot is one from LY-F918 ... with no touchscreen and wrong colors (I post a photo of the boot), after I mod a ROM from Cherry Mobility M906(??) And touchscreen and all other hardware works but not the colors ..
P.s. I have open the tablet and disconnected lcd flat And reconnected ... with no luck !
View 3 Replies
View Related
Feb 9, 2012
I have a Dreambook W7 and it looks like I've killed it.
That's what happened: I've tried to flash a new recovery, but did it in a wrong way, so now I can't turn the device on. In both variants (usual boot with "Power" button or boot in recovery mode) I just get an Android logo and nothing more.
Is it possible to somehow repair my tablet?
What was actually done wrong - I've used 'dd' command with 'of' set to "/dev/block/mmcblk0" with a wrong 'if' file.
View 1 Replies
View Related
Feb 5, 2012
Is there a way to install APK's from any of the bootloader menus? I can install through ADB if the device is fully booted & I have enabled USB Debugging. Is that the only way?
If that IS the only way, is there a way to reset the device's "first boot" attribute back to true after the first boot, so that the manufacturer's setup software runs on the next boot?
View 2 Replies
View Related
Jul 19, 2012
I have a BRONCHO brand crane-a710 tablet with Android ICS (OEM is not a global supplier). And, i have a Huawei K3765 3G USB modem which i use its phone feature with my pc. I want to use the voice call function of this USB dongle with my Android tablet but unfortunately can't. When i make a call to the modems phone while it is attached to tablet, i have the dialing tone on my cellular. But tablet doesn't seem to detect the call and it has no response. Also my tablet has no usable phone features (Phone, SMS and contacts functions are not presented). Now that's the question: Can i install phone featurs to my tablet (and where can i get the necessary files) or is there any phone mode Android ICS ROMs for my BRONCHO crane-a710 tablet???
View 1 Replies
View Related
Mar 22, 2013
I bought a tablet without a name. I would like to install CWM to make a backup of the rom. How do I do? Rom Manager says: device not listed above The tablet is already Root
Phone model: TAB950
Brand: DJIX
Hardware CPU: sun5i
CPU model: ARMv7 Processor (VFPv3, NEON)
CPU frequency: 30 ~ 1200MHz
Screen resolution 800x432
Screen density 160dpi
Render GPU: Mali-400MP
Android version: 4.04
Kernel: Linux version 3.0.8 +
View 1 Replies
View Related
Feb 9, 2013
I is it possible to instal Windows mobile on an Android Tablet with ARM procesoor ?
View 3 Replies
View Related
Jul 18, 2012
I bought just for try a tablet on Ebay - Name: N500 8G, Allwinner. Name of the model: BC1077, verzion of Android 4.0.3.
The problem is that the android 4.0.3 does not sync google calendar.
View 2 Replies
View Related
Dec 8, 2012
I've buy HCL me G1 tablet, but it dos'nt have play store. I tried many solutions that i've read from the net to solve that problem, but it dos'nt work. install play store on my Tablet.
View 5 Replies
View Related
Mar 10, 2013
When I set up my tablet it synced a few apps from the play store, but since then I have installed a bunch of other ones on my phone that I want on my tablet.
View 5 Replies
View Related
Jan 31, 2013
I'm with this machine the tablet DENVER TAC-10011.
in this tablet i can install another rom?
View 7 Replies
View Related
Nov 29, 2012
i want to root my SmartQ T20 tablet and install xRecovery, CMW or samething but i don't know how,
View 1 Replies
View Related
Apr 23, 2014
Can I install windows 7 on my samsung galaxy note 10.1 (gt-8010)?
View 1 Replies
View Related
Dec 16, 2012
My device:
I have an iDeaUSA YG A777 Android Tablet that is rooted. The version of Android it is running is 4.0.3.
My problem:
I updated the YouTube app from Google Play Store a few days ago. After it was updated, I tried to open it, but a message popped up saying that I needed to install Google Play Services and linked me to the app's Play Store page. Google Play Services downloads fine, but during the installation process, an error message pops up, saying:
"Incompatible with other applications(s) using the same shared user ID."
I don't have a custom ROM or a custom kernel; they're both stock.
View 9 Replies
View Related
Nov 3, 2012
I have a generic tablet
Memory size : 256
Model number : generic
Firmware version 1.6
Kernel version: 2.6.29-00236g4f8dbbb-dlrty
Build number : WMT2.1.2_88
So I have the huawei dongle model E1552 and i want to try it.... How can install the driver to use the dongle"?
View 1 Replies
View Related
Feb 10, 2013
how to install google play and other gapps on coby kyros mid1060 tablet?
View 2 Replies
View Related
Oct 28, 2009
I tried to install Android 2.0 platform via Android SDK and AVD Manager. In "Available Packages" I chosen to install "SDK Platform Android 2.0, API 5, revision 1". The Manager started to download data. After download was fininshed I got message "SSL peer shut down incorrectly". In the header there was a message "Nothing was installed". Any idea what is wrong? As far as know my friend also failed to install Platform 2.0 and he had the same messages in the Manager.
View 8 Replies
View Related
Dec 4, 2009
Edit / Update:
As an update to the below problem, I found the exact action which causes it to happen.
Download an apk from a url through the android browser
Install the app.
After install, the app gives you two choices: "Open" or "Done".
If you choose "Open", the quirky behavior described below starts.
If you choose "Done", then launch the app from the app tray, it works fine.
So it seems like this problem is caused by using the "Open" button the browser provides you after installing the APK.
I'm experiencing an error in the history stack of applications upon first install. I made a test app to demonstrate this.
The test app is simply two activities, A and B. Activity A launches B. That's all it does. Rest is wizard generated template code from eclipse.
When the user installs the app (via web url apk), and runs it for the first time, I get an out-of-order activity stack:
-User starts the app, A is on top.
-They make A launch B by clicking a button. B is on top of the stack.
-User hits the home screen button.
-User returns to the app, A is displayed, instead of B.
-User hits the back key, B is shown!
-User hits the back key again, A is shown!
-User hits the back key again, home screen shown.
-Now the stack is clean, and app behaves "normally" from now on!
Is any one else seeing this? This is almost exactly like this known bug, however my users are not installing from eclipse:
http://code.google.com/p/android/issues/detail?id=2373&q=first%20%20i...
I can provide the test app/source if anyone wants to try. This is the manifest, which does not have any special customizations made to it. code...
as far as I know, this should definitely not be happening, and works fine after you clear the history stack the first time.
View 1 Replies
View Related
Jul 9, 2010
So I try and install the zip off of my sd card and i keep getting an error
E:signature verification failed
installation aborted
can anybody tell me what im doing wrong
View 3 Replies
View Related
Dec 11, 2013
how i can install new os android from sd card or anything method can do it ??? currently my existing os is 4.0.4 but my os get problem something wrong so i want to do is format the existing os then install new os android 4.1.1 to inside... my tablet is no branded product just in market is mix product from china or taiwan brand product..
View 1 Replies
View Related
Dec 31, 2013
I have a Nexus 7 tablet and every few days I notice a few new apps on the device. I'm not sure if they're full apps or just simply icons to download apps or get more information. I have tried to avoid using them. I know previously I had a couple apps that were sending notifications to the notification system that I considered to be spam. After some research I found out how you can find out which apps are doing it and disable notifications from those apps so that took care of that.
View 4 Replies
View Related
Sep 15, 2013
I have a Jiayu G3 that won't boot in Android and apparently not in CWM either. I kinda did a lot of "upgrades", here it goes (I just wanted to upgrade it to Jelly Bean).
I originally had 4.0.3 (stock/unrooted) then I rooted it using Binr4y's root method. Then I "installed Jelly Bean" from this video and then it started a boot loop then went on and on so I tried another rom and found this one RAW MOD B3, this one didn't worked either still looped on and on, so I tried finding a fix and came up with this Lewa Recovery 2.0 for JIAYU G3 so I flashed Lewa Recovery image with CWM and now to my surprise I can't even boot to CWM anymore.
I also installed before the Lewa Recovery Flash, White Google Logo.
So now my situation is kinda like this:
- I should have RAW MOD B3.
- I can't boot into Android it loops on and on at the logo.
- I can't boot into CWM either it also loops on and on.
- I don't really know how to boot into TWRP or Lewa.
View 1 Replies
View Related
Feb 5, 2013
I know that my girlfriend needs and wants a tablet(a simple one) , so I ordered a serioux visiontab s800 which will be shipped today.
I want to setup an app or if possible in another way, to play a certain song when booting the tablet. Or even after it has booted. I just want it to start playing a song all of a sudden If this is possible , I might want to start working on it asap, since I will give the gift on Thursday.
View 2 Replies
View Related
Jul 20, 2012
Is there anyway to get an itunes software onto an android and get it to front load as the main screen upon boot up?
View 1 Replies
View Related
Mar 20, 2014
I have android 4.0.4 recently i flash recovery and boot with TWRP recovery img accidentally with rom installer now my android is not booting no factory mode worikng nor recovery mode.. i am unable to connect android with pc becuase its shuted down..
View 7 Replies
View Related
Jul 8, 2012
My phone is HTC EVO 3D, and it's bricking after the ICS update from provider. It hangs on the HTC logo. I read numerous post about flashing it with update or rom, but it's now S-ON and when I try to flash from SD card in recovery it gives me :
Invalid Operation
Rebooting Reasonem-00
As far as I know I have to get it to S-OFF before I can use recovery to flash it, but I tried revolutionary and seems like it require the phone in a working state to function. Currently when I run revolutionary with usb connected on HBOOT-1.49.0008 menu revolutionary won't connect. I don't have CWM either and I don't know how to get it onto the phone without Market Place and S-ON.
Is there anyway to get it to S-OFF so I can move forward to fix my phone with any working rom? Fastboot is connecting no problem (at HBOOT menu) but I don't know if it allows me to flash or turn it to S-OFF.
View 4 Replies
View Related
Jan 9, 2013
I have samsung galaxy ace s 5830. I had tried to flash cyanogenmod from recovery mode. I downloaded cm-7.2.0-cooper.zip file. and selected the same in recovery mode. But after successfully installation when I am booting the phone only A N D R O I D letters appears on my screen and my phone does nothing after that. I have also tried removing the battery 2/ 3 times.
View 5 Replies
View Related
Aug 27, 2012
I had done a mistake 2 days ago by installing XGS Serie's ROM in my DHD. After installing the ROM from recovery the phone is'nt booting and just animated X. This is only the 3rd time I installed a custom ROM hence I haven't got any solution. how to recover my phone at least to make it to factory reset.
View 1 Replies
View Related
