Was about to flash cognition 2.2 but I wanted to Undo my one click lag fix first. Now I'm stuck on the Galaxy S black screen. No idea what to do, I can't use odin cuz im on a Mac.
View 4 Replies
I tried the new speed fix and suddenly all my apps stopped loading. so i rebooted, now it got stuck on galaxy s screen and wont turn on. after waiting i got a black screen and the buttons are lit up
View 7 Replies View RelatedI looked in the market this morning, and saw an update for the OCLF. I installed the update, then opened the app and selected "Undo OneClickLagFix V1+". Afterwards, for good measure, I removed then reinstalled "EXT2 Tools." Every time I've tried to install the V2 lag fix, I get an error (redoing OCLF V1+, however, appears to work fine).
View 7 Replies View RelatedI was attempting to install the latest Cog and now the phone is stuck on a screen with a little white phone ---an exclamation point---and then a little white PC.
View 3 Replies View RelatedI've only had it for a week, so how do I exchange it?, or what do I do?
In case you wonder how I know, the screen goes to blackness after the galaxy S screen
i put my phone into download mode, odin one-click was open already, press start then:
<ID:0/009> File analysis..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> Sbl.bin
<ID:0/009> boot.bin
<ID:0/009> cache.rfs
<ID:0/009> dbdata.rfs
<ID:0/009> factoryfs.rfs
And a green screen on my phone.
Anything you guys can think that could help? I've searched around, and found that holding down VOLUME DOWN and Power lets you hard reset the phone, but this doesn't work for me. I hold them down, and the phone just boots up like normal and then shuts off.I rooted it, and it was working fine. Rebooted a few times and then it quit working.
View 7 Replies View RelatedThe update did not fix GPS and did not improve Media Scan. It DID remove the PC Internet option. How does a complete newbe undo the update? I read that ODIN3 would restore factory settings; but, several people that used ODIN3 warned against using it unless there was no other option.
View 3 Replies View RelatedI'm doing my usual pushing buttons. I dl'd the manual but can't figure this out. I have on the main screen an option of 5 different things: wifi (on/off), bluetooth (on/off), something, something, screen brightness. I think I toggled it on but don't know how to turn it off now.
View 1 Replies View RelatedI put Cognition on my phone today, and made a backup image of the stock 2.1 before putting Cognition on. I decided I want to go back to the Stock, so I clicked the "manage backups" part of Clockwork, and "recover" on the image I saved. Next, the phone rebooted, and looked like it was installing the backup image, and rebooted again. However, it will not go past the White AT&T screen. Is my only option to use Odin to give it a factory reset? Or is there an easier way for me to do this?
View 3 Replies View RelatedWe tried to root it and apply the lag fix via "OneClickLagFix" app (from the Market), and the phone was very fast for about a week, then slowed down SIGNIFICANTLY. Tonight, it just froze and will not boot past the Galaxy S screen. The screen will then go black and the four buttons at the bottom stay lit. We have gone into recovery and wiped the cache but no luck. Have not yet tried to wipe user data.
Transfer all data from internal storage to a separate drive, then wipe phone? If so, will I have to "flash" a stock/custom ROM to get the phone back up?
I installed OCLF V2+ and all is great. However, one day I turned on the phone and I think it's physically broken. The symptoms are:
- Only half screen image
- Other half screen has strange stripes
- The phone doesn't go past the spash screen
- It will boot in recovery and download mode. Here there's still only half a screen
So what I want to do is undo the lag fix, remove ext2 tools and unroot the phone before I go back to the store. Can anybody help me with this?
I CAN start in recovery mode and use adb shell to go to the phone shell! So I suppose I have to do the above steps from the shell!
Was updating my SGS when it got stuck on the screen where Android is digging in the dirt and says Downloading... do no turn off target.
Windows is also giving me an error "The Program can't start because RAPI.dll is missing from your compter. Try Reinstalling the program to fix this problem"
I tried reinstalling Kies but nothing happens.... Why oh why couldn't Samsung have just let us update OTA.....
I was rebooting my phone today and it every time I try it gets stuck on The Galaxy S logo with the big flashing "S" on the screen. It acts like it is going to boot up but just after the ATT screen and the boot sound it gets stuck. I did the one-click-lag-fix about 2 weeks ago and the phone has been running smooth ever since. My wife and daughter are on the road so not having a phone really stinks right now.
View 10 Replies View RelatedSamsung GT-I8260 Galaxy core
1) Samsung logo stuck screen
2) Recovery will only work when plugged with a usb cable to my computer
3) Did factory reset/wipe data cache/everything still samsung logo stuck
4) Kies 2.0 wont recognize the phone i think it has something to do with battery charger option turned on when you plug it with a usb(i remember from a thread someone said if you have it to charge when you plug it to your pc it wont work)
So is there any way i can still make my phone back to work?I tried with the pull battery off charge it and not working..Is the kies problem because of a bad usb cable?should i get another one?I was running officcial rom no custom rom just rooted the device
I was running the JI6 2.2 with cognition beta5.5 and was attempting to update however I needed to swap kernels since the current kernel didn't verify signatures. I was using vmware on a mac and i started it but then continued to use the mac side however the computer disconnected the phone from the windows side and now it is stuck showing an image of a phone next to a computer with a triangle with a ! in it between the two. Pressing all hardware buttons does nothing but black the screen and go back to the same screen. I've taken out the battery, sim, unplugged the cord, everything. Can't get back into download mode to redo the kernal swap. It's definitely connected to a valid, and working, usb port and i am now on windows itself instead of vmware. What do I do?
View 4 Replies View RelatedI dropped my phone for the first time ever today, and there are cracks under the screen, and no picture whatsoever. Sounds and buttons still work, and I can turn the phone on and off, but the display remains utterly blank. I've pretty much written the phone off, there's probably nothing I can do for it. However, I would love to recover my pictures, contacts, and music from the phone. Is there any way I can do this without being able to see the phone display?
View 1 Replies View RelatedI downloaded a kernal on ryans lag fix and then it made my phone get stuck on the VIBRANT SAMSUNG screen so i tried to fix it by using odin, but all it did was make it go to the Galaxy s sign now, any suggestions on how i can fix this? (and also, after the galaxy s sign shows up for about ten seconds or something like that it goes all black and all that stays lit are the home button, the back button, the search button, and the settings button)PLEASE REPLY, i need serious help.
View 2 Replies View RelatedAny good lock screen Apps for non-rooted Captivate that would put a big clock and my Exchange daily schedule on there?
View 4 Replies View RelatedPhone got stuck on boot screen due the unseccessfull galaxo update (got foce close, and had no valid backup). Tried to odin 3 diferent firmware (iik5, jc4, jc6), every time odin flash passes bud afrer rebooting the phone loops boot screen.
View 1 Replies View RelatedMy phone suddenly restarted and it is now stuck at the Android screen. Dont know what to do?Can anyone help me?
View 11 Replies View RelatedI just got the Behold 2 last night and I wake up this morning to a phone thats stuck on the Android SCreen? WTF is that? Anyway, I have already tried reseting it and taking out the battery, Format SD card, Taken out both cards. Maybe this phone Really is a piece of shit. If it has, I am taking it back in the morning to Tmobile and getting my money back. Then I am Going to Sue Samsung for making such a piece of shit phone.
View 4 Replies View RelatedI believe it's called boot looping? It originally happened after I rooted my phone (original 1.5 software) following these directions: How To: Root the Samsung Behold 2 | The Unlockr. After that, I deleted DinerDash2, Midnight Bowling, Where's Waldo, IM, Talk, Amazon MP3, MyFaves, Telenav, HotSpot, Audio Postcard, Postcard.apk. When I tried to reboot my phone, I was stuck on the Samsung screen. I finally got the screen to go away, but a message repeatedly popped up saying the TwLauncher closed unexpectedly. Then I tried using ODIN and installing BH_Man's factory v1.6
http://androidforums.com/all-things-root-behold-2/63612-port-behold-ii-factory-1-6-a.html.
I used the adb commands to delete the bloatware again. Restarted the phone and got the same problem. (Except I was stuck on the android screen.) I tried to install the factory v1.6 again, then immediately did a factory restore and then rebooted my screen once it loaded. Everything seemed okay. I uninstalled the stock games and rebooted again. It seemed to be working. When I uninstalled more apps (including CubeLauncher) and restarted the phone. What do I do? Did I uninstall something I am not supposed to? I think I might try installing the 1.6 No Twiz Kernel. I am sick of these "TwLauncher closed unexpectedly" messages.
I'll let this screenshot speak for itself. I JUST took this screenshot. How'd I do it? Check out the article over at XDA. [UTIL] One Click Lag Fix - xda-developers, You'll need root, Busybox, a Windows system with USB cable, and an iron stomach. (By the way, this was not my best run of Quadrant. The first time I ran it, I got a 2057. Unfortunately I didn't get a SS.)
View 49 Replies View RelatedI did the one click lag fix which gave me super user also. However I noticed today that my battery life is at half what it was before yesterday. Is this normal?
View 2 Replies View RelatedI can root a g1 with ease but I sort of got into trouble with the behold. This might sound stupid but do I need to root the phone before I install the port galaxy 1.6? I just did this.
1. download odin here Odin Multi Downloader v4.03.exe
2. download any Of BH_MAN ODIN Ready Rom's
3. download winrar ( google it) to extract the BH_MAN zip file.
4. follow these instruction
Quote:
1. Unzip the zip file.
2. Open Up ODIN Multi Downloader
3. Click the OPS button and choose Behold2_partition.ops
4. Click the PDA button and choose the md5 file, You will get error message" invalid image...," but ignore it.
5. Turn off Phone.
6. Plug phone into USB.
7. Put phone in download mode (Vol Down + OK + END Button)
8. Wait till detected and press START.
9. Enjoy the Port.
And my phone was stuck on the android logo. do I need to root first and where can I find this? Is this where I go.
http://androidforums.com/all-things-root-behold-2/22470-persistant-root.html
Can I do this method even though my phone is stuck on the android screen? How can I get back to default at least?
I just bought the captivate on the 15th and was wondering how you get to the root menu from boot up so I can run the one click lag fix app.
anyone know how?
The lag fix and froyo really turns the Galaxy into such a slick and smooth handset! Definatley worth the wait!
View 5 Replies View RelatedI have the screen timeout set to 1 min which works fine until I use the phone. When using the phone the screen times out (and locks) in about 5 seconds. This is a real pain when using voicemail etc and you need to interact with the keypad.
View 2 Replies View RelatedFor anyone needing to flash back to stock while XDA site is down, I located a simple guide and a link to Odin 1 click. What's Odin?
View 7 Replies View Related