And I am greeted by a screen: Enter SPC password and the buttons Verify and Cancel under the window. It will only take a numeric code and I tried a few (last four of my phone #, my PIN for my voicemail.) I have a MotoDroid with the Froyo 2.2 forced update. Now knowing that:
1. What IS the SPC password?
2. What does the ##Program show?
3. Anything else I should know before I try (IF I should try?) this again?
View 7 Replies
I can get Country code ISO using TelephonyManager function getNetworkCountryIso(), this functions returns country code US for USA, but how can i get numeric country code?
I am unable to find any function for it that give me country code in number for example function that will return 92 for Pakistan.
I have had a slider phone for years and could text super fast. Then I switched to an Eris where I had the option of using the qwerty keyboard on landscape OR I could hold it upright and use the numeric keyboard with T9 like I did on my slider. I always held it upright and was very happy. I was having reception issues with my eris so I traded it for a Moto Droid. Is there an option for the numeric type of keyboard becuase it takes me friggin forever to type a text.
View 2 Replies View RelatedMy wife and I both have Moto Droids. She has been having a problem where, occasionally, people that she sends text message to tell her that that the message arrives with non alpha/numeric characters and instead are either (a) blank, or (b) filled with special characters and the original message is not sent.
I found a thread that says blank messages may be caused by draft items, but nothing about special characters.
Was trying to go back to 2.1 from 2.2. RSD flash failed, had to unplug phone. Now the boot loader screen says CODE CORRUPT and Cannot Program. I can only get this message when plugged into the wall charger. If i plug into USB to PC i get just a green light where the power light is any help or suggestions would be appreciated.
View 9 Replies View RelatedI was in the process of rooting.I've tried everything, looked at different threads from many different websites, turned it off, pulled battery, tried charging it via wall charger, everything. Am I totally bricked?
View 6 Replies View RelatedI am trying to integrate my code to the android Home Screen code. I want to launch my activity frm the HomeScreen by click of a button. I Did the code & then build it but when i click the button i m getting error as Application not installed on phone.
View 7 Replies View RelatedI'm trying to take the user input, which may or may not have a comma in it, and put a comma in the correct places upon the user deselecting the field (or at all, if that's not possible).
I would also like to know how I can subtract the commas to make the number just an integer.
How to use code to capture screen on android phone?
Can someone give some demo code to guide me?
If I have an EditText component on my screen that I have specified inputType="decimal" for (i.e. a numeric/decimal field), what is the best way to convert it to an decimal value in the application code?
Google recommends avoiding floats, and avoiding creating objects unnecessarily (and I assume any auto-unboxing code is bad too), so I take these as my constraints. I realize a small application probably doesn't need to worry too much, but I haven't been able to find a 'best-practice' solution to this.
The most common solution appears to be this:
double value = Double.parseDouble(txtInput);
Can some one show me the sample code to draw a rectangular pulse in android screen. I want to generate a bunch of them on x axis (which I imagine as middle of screen).
View 3 Replies View Relatedlost my lp code its not on paypal how do I get a new one I pmd the dev but didn't get any response
View 7 Replies View RelatedTrying to pair Droid with PC to use Bluetooth File Transfer app and having helluva time. sometimes I get it paired and then PC refuses connectiong when I try to access computer from Droid. Is there a default pairing code for Droid or can I use the 'no code' option?
View 3 Replies View Relatedhow do you use one of the bar code pics for an app? like, how do you make the droid download it just by using that barcode?
View 5 Replies View RelatedI was following the instructions on "How to: Return DROID X Back to Android 2.1 to go from 2.2 leak, to stock 2.1 so I can get the OTA 2.2 update. I've never rooted and after RSD did several things, it gave an error something like "Error sending RAM download for bootloader..." (there was more to it than that, but I don't have it on my screen anymore). After trying several things, my phone now comes on to the bootloader, but says "Code Corrupt" then "Battery Low" and "Cannot Program" flash on individual lines below. I plugged it into an outlet for nearly two hours and I'm still getting the same thing.Anyone seen this if so how do I get beyond it? One thing I read said that he just checked "ODM_Serial" under Config>Flash/Flex options and started over and it worked. That would be great, but the computer won't recognize it as connected as long as it's doing what I described above.
View 3 Replies View RelatedFirst, let me fully admit this is an annoyance to me. Second, let me fully admit this situation is 'as designed.' As was indicated by Verizon, FRG22D made some changes that 'improved security.' In particular the ability for Exchange admins to enforce security settings. Well, I have a hosted Exchange account (personal email) with 1&1. Post manual update to FRG22D, I am now required to have a PIN code to unlock the phone. No unlock code and the pattern are not available. So, every time my phone comes out of 'sleep' mode, I have to enter my PIN. Incredibly annoying...
Ultimately, it's an issue to work out with 1&1 to see if this can be changed. I see no setting in the options presented to me in the OWA settings or in 1&1's XAdmin panel. If anyone happens to know if this is easily changed... please let me know. Sorry for the partial rant, but I am incredibly annoyed.
I've recently been receiving SMS message from 6245 (I know - it's "MAIL" on the keypad) that says: "//BREW:0X0106DCC7:UPDCHK:MajorVersion:4.0.07.04*END".
Is anyone else receiving this, or know what it is? I received 3 of these today, and about 5 over the last several days. It seems to have happened after installing Trapster. I don't see anything on their forum that gives me any clues.
Need an app that let's me have an album that doesn't open with out a code for work
View 7 Replies View RelatedHow can I get my Launcher Pro "plus version unlock code"?
View 8 Replies View RelatedI see this square bar code looking image on a lot of android sites. what is this and how does it work? It appears to be somekind of identifier for apps and such.
View 2 Replies View RelatedI have looked and looked for a solution to this problem and have not found one. I see others are having the same problem though.I have the Droid X I am using the messaging that the phone came with not an added app (I am on Verizon). When I try to reply to a text from my husband I get a message saying "unable to deliver. Please re-send with area code". He is in my address book with an area code and the callback number has the area code. But next to his name it does not have the area code (again, it is entered in my phone with an area code). I have tried to delete his phone number, text my phone with his phone, and reply, but that still does not work. It is so frustrating and weird. Even when I do not have him in the address book the call back number (shown as cb#) has the area code, but up higher when his name would be does not have the area code.
View 5 Replies View RelatedDoes anyone know why Google Voice requires an area code to call? I understand that the number it dials from could be from anywhere, so it may need an area code to complete the call, but how about an option to dial a default area code when the person does not enter one?
View 9 Replies View RelatedWell i flashed befor and my son was playing with my phone and he let the verison patch come on top of my rooted phone.. well i still have super user but it will not let me do anything stop all of my wifi tether ect. ok well i go to re flash my phone and now it will not let me flash it. It just stops at the start.
The error code i get is (0x7100)
Can nandroids be renamed? I'm getting quite a few saved up and the date code is not tickling my memory of what the set up was on that particular day.
View 33 Replies View RelatedI want to replace the default virtual/soft keyboard with a numeric keypad (with big keys) to simplify number entry. Anyone has any such experiences or knows any guide/tutorial about this?
View 2 Replies View RelatedI use the following code to listen for the key presses of 0 - 9 from the soft input keyboard on Android: The code works when i display the soft input keyboard in the following mode: http://i.imgur.com/Snasz.png: However it does **not** work when I display the soft input keyboard in the following mode: http://i.imgur.com/wf0Kt.png. Why is this?
View 6 Replies View RelatedI have Edit Text. If soft keyboard is open user is able to change laquage or numeric-alfa mode. I want the Edit Text is in numeric mode by default BUT user has to have possibility to change the keyboard from numeric mode to text mode. If anybody knows tell me how to do it.
View 4 Replies View RelatedHow can I set numeric-only soft keyboard option for a text field? When I set the input-type to "number" it brings a soft keyboard which is actually a alpha-numeric one but already switched to numeric mode. What I want is a pure numeric soft keyboard with big numbers (no alphabets at all). I've already seen this in other applications and but don't know how to do it.
View 6 Replies View RelatedI have a TextView (or MultiAutoCompleteTextView) field where user can enter both numbers (0 - 9) and characters (a -z, what ever).But I would like to set the numeric soft-keyboard as default. I want the numeric keyboard appearing first, but user can press the [ABC] button and enter what ever character he wants. Is this possible?
View 3 Replies View RelatedSuppose I want to include data right in an intent, e.g. pass a number or string in the intent data field.What should the uri look like? Something like "data:3.14159"?Or just don't include the scheme at all, "3.14159"? In fact, is there a list of standard schemes anywhere?
View 4 Replies View Related