Well i flashed befor and my son was playing with my phone and he let the verison patch come on top of my rooted phone.. well i still have super user but it will not let me do anything stop all of my wifi tether ect. ok well i go to re flash my phone and now it will not let me flash it. It just stops at the start.
The error code i get is (0x7100)
View 5 Replies
I just had this problem and I've seen other people having the same issue. I found the solution, at least for me, so I thought I'd share it. I was trying to flash the SPrecovery spf file using RSD Lite, but it would fail immediately. I found someone else on another forum who discovered that the file had to be in the root of his C: drive for this to work. I gave it a shot and it worked with no problems. This seems really strange. I think he was running Vista. I'm running Vista 64-bit. I was already running RSD Lite as administrator, so that alone didn't help. Moving the file to the root of C:
View 49 Replies View RelatedI've been trying to go back to barebone 2.1. Im running 2.1 but have themes installed. I ran the fab theme killer and still have aspects of the last theme stil hanging out like the themed facebook and themed power control widgets. I tried to sbf flash it and failed.
View 6 Replies View RelatedI decided to go ahead and flash back to 2.1. Now all my phone does is go back and forth from "Droid" to the eye over and over again. I have to pull the battery to stop it. The flash process seemed to go smoothly until the phone booted up. RSDLite had said to manually start the phone, but it had already booted on its own.
View 5 Replies View RelatedMy phone is dead after I flash a wrong preloader my phone model is alps GT-I9500 mtk6572 . I try with ALL ROM on needrom.com with keyworld "alps" "GT-I9500" "mtk6572" ... about 20 ROM but I get Enable DRAM FAILED for each try
Use case :
1- Disconnet the battery and wait 10 seconds
2- Open flash tools with the scatter file
3- Connect the phone usb cable to pc
4- Plug the batterie on the phone
==> MTK USB PORT (COM XX) ok : drivers on the pc seems to be ok
5- On flash tools press download
every time I get BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)
[EMI] Enable DRAM fail
on the web they say the cause is the wrong ROM but I don't know (I try over than 20 ROM)
I'm un-rooting my phone using OMJ's guide in the everything root related guide, and I'm getting a "Failed Flashing Process" error in RSD Lite.
I am running as admin, I have the correct drivers (I recently rooted...), I have the sbf in C: .... yet it fails.
The error says " Failed Flashing Process. Failed Flashing Process. Interface BP: Error flashing subscriber unit. Device API Error: 0xE0030009 Command: ADDR (0xE0231009); phone connected"
I am going to try flashing SPRecovery to see if I can at least get to a working point.
SPRecovery worked. It boots into 2.1 and has SPRecovery as the recovery. I still want to get it to stock, so I am going to try and download the stock sbf again (it doesn't have a checksum so I have no way of knowing if it is good or not...) .... here goes nothing!
Fortunately, my phone is not bricked. I unrooted it by using the one-click app, downloaded and tried to install froyo but received an unkind error message. The Update failed to Install. I'm assuming I need to flash the phone back to factory? How do I go about doing this?
View 19 Replies View RelatedInstall from sd card Finding update package Opening update package Verifying update package E:signature verification failed Installation aborted. Samething everytime! i tried doing it myself i just tried dmupdater?
View 3 Replies View RelatedI just got the upgrade to my system that is supposed to allow me to install Flash from the market. After it downloads, the installation fails with the message: "Package file was not signed correctly." I see comments from other Droid users that look as if theirs installed (although I am not certain that they are Motorola Droids).
View 4 Replies View RelatedEverytime i go to send a message it says sms error cause code 34 error class 2. i did a hard reset and it is still happening?
View 3 Replies View RelatedI'm pretty new to android, and just finished setup my environment and reading some tutorials. Then I got sdk samples from the web. Okay, what I wanna ask you is that is there a way to start a sample as a project in the Eclipse? I mean like clicking a project file in c# or a solution file.code...
Or, do I need to make a new android project and import (or add files? maybe) them?
I've had my ERIS for less than a week and can't get text messages in or out. I receive SMS Error Cause Code 97, Error Class 2 message each time.
View 6 Replies View Relatedso i just did factory reset, and texts wont send. SMS. get the error: SMS Error General Problems, Cause Code: 34, Error Class:2 come on, i thought factory reset was supposed to make EVERYTHING ALL BETTER you know how when sending a text, it swtiches to 1x? yeah well mines not doing that; it's staying on 3G.
View 11 Replies View RelatedI am attempting my second root, I just did my Eris which made it amazing. I am now working on rooting my girlfriends Evo. This has been a little more challenging. Her radio version is 2.15.00.09.01, every post online has been prior to this version and fails to root. Does anyone have any help for my situation. My main goal is to flash her phone with Cyanogenmod.
View 5 Replies View RelatedA fatal error occured while making build of Android 2.2 source code.
The error occured can be found in this link: http://pastie.org/1292955
How to solve this problem ?
ever since the update last night i am unable to send text messages I get SMS code cause code 255, error class: 3.I'm getting pretty mad.
View 7 Replies View RelatedAll the new features sites said Flash 10 was part of Driod 2.2. 2.2 was pushed to my phone overnight and I installed it. However when I go to the Adobe Flash showcase, it says I don't have flash installed. So I search the market place and do not see flash as a download. Is this just something that will come later? I really don't read up on Driod all the time so I don't know all the news, just a regular user.
View 4 Replies View RelatedI have gotten both the Flash Player and Flash Lite APK's, and I have been trying to install them on the Droid. Flash Player refuses to install on stock 2.1. Flash Lite installs, but after install I can not connect to the internet (Nothing connects, Skype, market, random app, browser.)
So I wanted to know if anyone wanted to do some testing with them, to see if you can get them running on the ROM you are running. Maybe we will be able to make fun of iDevices earlier, because Droid Does what iDont
Flash Lite: FlashLitePlugin.apk
Flash Player: FlashPlayer.apk
My Problem: Was using the HTC Desire bought in India. I rooted with Unrevoked 3.21, S-OFF with Alpharev.
I was thinking of taking my phone to HTC to show an LED burnin problem, and tried to unroot by flashing the RUU for Asia_India: RUU_Bravo_hTC_Asia_India_1.21.720.4_Radio_32.36.00 .28U_4.06.00.02_2_release_127705_signed. I thought that was the correct RUU.
I booted my phone in Fastboot, applied the RUU, and it rebooted my phone into RUU. Then it flashed an error message saying the RUU version was incorrect. Being the idiot that I am, I rebooted the phone..And got stuck!
The phone does not boot. On pressing Vol- and Power button, it vibrates, and then nothing. Screen is blank. It wont boot into Fastboot, Recovery or the ROM. If I connect it to USB and do the Vol- and Poweron, it detects my device as an Android 1.0 device.
I have tried the following:
1. Went to Android SDK, tried flashing Clockworkmod recovery image with the command:
Code:........
I have received the following error when trying to install packages through the SDK and AVD manager tool: XML verification failed for http://dl-ssl.google.com /android/repository/ repository.xml. Error: The markup declarations contained or pointed to by the document type declaration must be well-formed. I have downloaded the latest versions of the Android SDK and AVD manager (revision 5), Eclipse IDE for Java EE developers (version 1.2.2), and the ADT (0.9.6). I have checked the Force https box in the settings tab, I also have both an http and https version of the same url. I re-downloaded all components multiple times. I am using Windows XP service pack 3. Anything anyone could suggest would be extremely helpful. You received this message because you are subscribed to the Google Groups "Android Developers" group. To post to this group, send email to android-developers@googlegroups.com To unsubscribe from this group, send email to android-developers +unsubscribe @googlegroups.com For more options, visit this group at http://groups.google.com/group/android-developers?hl=en
View 2 Replies View RelatedI tried to start the camera flash for an app I'm doing but I don't understand why it isn't working.
here is the code:
Code:
import android.app.Activity;
import android.hardware.Camera;
import android.hardware.Camera.Parameters;
[Code].....
For information I'm using a LG Optimus 3D for the test of this app.
I want to start the activity owned by other application. I know we could construct the Intent(setAction,setClass), and then call context.startActivity(intent) to start a new activity owned by the same application. When we start the activity not owned by the same application,doest this also work?
For example, I have a activity (com.test.StartTest) and there is a button that used to start some activity Settings owned by the Phone:
CODE:..............
Has anybody received an error "the server failed to communicate" when attempting to get an internet connection?A restart didn't appear to resolve it so I took the battery out and now its working.I don't think its network related as I had a HSDPA signal at the time.
View 3 Replies View RelatedWhen my app starts often I get this error. Only this one, anything else, and my app works fine.
What does it mean?
ERROR/AndroidRuntime(28130): ERROR: thread attach failed
28130 is the pid, but it is always different from my app's pid.
I am attempting to upgrade my ROM from the 1.7v. I dl'd the RUU file and did everything as required. However, when the bootloader tries to connect I get a prompt, "ERROR[171]:USB Connection ERROR". It asks me to make sure that the phone is connected to the USB cable and for the USB cable to be connected to the PC. Both are connected but I noticed that the phone is powered off. It will not power back on while connected. It will once I disconnect it from USB cable. This leads me to believe that the phone starts to do what it is supposed to but somehow disconnects.
View 10 Replies View RelatedI'm not sure this is actually allowed here, but since I usually go to StackOverflow and search for answers (and in many cases find the answers) I thought I would ask a question and then answer it myself =)
So, I have Sygic Navigation om my HTC Hero, and since I need to start that app from code (and then use the API to control it) I did some investigation on how to start it - what intent to use.
So, the question is: what Intent or Activity should I use to start the app?
I have the following problem. I was developing in android using the eclipse and android-sdk-windows saved in an folder (e.g. C:androidandroid-sdk_r07-windowsandroid- sdk-windows and C:androideclipse-pulsar-helios-win32). But after i downloaded and installed the eclipse and android sdk again, in the after folder, i got this error message: "Failed to parse the output of 'adb version' " and can't run my application, because the emutaros that starts is not identified by the eclipse, i can't find it into "Devices" tab from eclipse. I found from the net the following http://stackoverflow.com/questions/2260118/failed-to-parse-the-output "Try closing Eclipse, issuing a 'C:UsersMohitDocumentsAndroidSDKools kill-server' command from terminal and retrying. If that still doesn't work, you could try opening Activity Monitor to see if there are any existing adb processes running, and kill them. but i am using Windows XP and i don't know how to use kill-server command from the terminal. I mean in run/cmd there are is no such a command or how can i use the second solution - to open Activity Monitor from Windows XP
View 9 Replies View RelatedI faced to the serious problem when building my environment. I use below software for compiling. android SDK (android 2.1) eclipse 3.5.2. At first, this problem occurred on eclipse 3.6. I looked for the reason and countermeasure on the web. As the result, I re-installed eclipse 3.5.2. however, the problem was not fixed yet... after building, the below message has been displayed. "Conversion to Dalvik format failed with error 1" if you know other countermeasure for this.
View 3 Replies View RelatedI include JMF in my application. When i run my application the following type of error will occurring...
CODE:...........
How can i resolve this error?
I have included camera functionality in my application. I have also launched the app in the market. I got an error message from one of the users that he is getting an error while opening the camera...
I have tested the app on the device on 2.1. The error i got from the user is using nexus one which will mostly run 2.2...Here's the logcat error that i received...
java.lang.RuntimeException: setParameters failed
CODE:............
I ran the app on 2.2 emulator also to check it. But it worked fine. can anyone please tell me why the error is occuring?
Here is the class which i mentioned in the comments :
CODE:..................