I did the gscript way on rooting the phone and that was a success but when I'm trying to flash the Plain Jane rom it would work but then when needing to be restarted it would just go into bootloop like have the ERIS screen then appear with the Plain Jane over the top of it and just repeat itself forever. What am i doing wrong?
View 12 Replies
I have tried flashing several kernals with different ROMs, but more often than not, my phone just ends up restarting over and over. after i boot it, when i flash the kernal, I would be playing with it then all of a sudden it would freeze up on me and start boot looping. I have cleared the dalvik and cache before flashing ROMs and kernal. I rooted via 3.21 unrevoked and it says on the top of hboot s-off. The only kernal that has worked is netarchy-toastmod 4.1.8 bfs. any idea what i could be doing wrong?
View 22 Replies View RelatedI'm about to travel a couple of hours to an interview and I need the phone working. I flashed it, then rebooted and its been stuck on the white evo screen for over a half hour. Its not rebooting constantly so i don't think this is a 'bootloop' per se. What do I do? Pull the battery?
View 4 Replies View RelatedCant enter recovery as that reboot loops the cyanogenmod image, can I maybe use a custom flasher and flash the euro open BIN?
View 2 Replies View Relatedto get out of bootloop that occured due to flashing zip file via CWM on my micromax canvas 2 plus phone which is the safest way ? I dont want to lose any data...
View 5 Replies View RelatedI have a Droid Eris that I'm trying to flash from 1.5 to the latest rooted ROM 2.1. My first attempt, I copied PB00IMG.zip to the SD card, disconnected the phone, and flashed the firmware while disconnected from the PC. I think that prevented me from gaining root access, because I cannot remount the system directory using the adb commands (gives me access denied). I'm trying now to flash the ROM while still having the phone connected to the PC, but I'm not having much luck, as I am still being denied access.
PB00IMG.zip worked WONDERFULLY on my phone.
I have a rooted 2.1 eris and adb is all set up. I get all the way down to the commands and the last one:
adb shell flash_image recovery /sdcard/recovery.img
says file not found. What am I doing wrong
I flashed xtrTenzo and well its not going anywhere. Its just stuck at the pics of the skateboarding droids. So do i just do a battery pull or what?
View 6 Replies View RelatedI went to go update mine and my girl's ROMs yesterday. Did mine with Tazz's new 2.0, and I'm loving it. I went to do hers as well and when I get into the main menu the trackball doesn't scroll up or down. It works fine when the phone is in operating mode. She is running CELBfroyo. Any suggestions? I cannot scroll around to do a wipe and flash a new rom...
View 37 Replies View RelatedI recently got rid of my iPhone (couldn't stand Job's arrogance anymore) and decided to go with the cost effective route of MetroPCS. When I found Android phones could be flashed to work with it, I was quite excited. I found a phone and someone to do the flashing on Craigslist (actually a local phone shop that does it).
He flashed my phone and loaded Evil Eris onto it. I wasn't under the impression that if he put this rom on, I was going to have issues, like no voicemail notification or softkey leds. Going into this, I was pretty unaware of all the different rom choices, and the effects they have on the phone, and I still kind of am. So I have a few questions, because I've been reading about Ivans and kind of want to try it out, but want to make sure I've covered all my bases.
1. I am still unaware of the exclusivity or co-dependence that "flashing" a phone and changing a rom have with one another. He flashed my phone to work with Metro, and upload the Evil Eris rom. Main question is - if I wipe and load Ivans, do I lose the ability to use Metro? Or is it simply an issue of loading up my Metro APN (i think thats right) settings once I've loaded the new rom?
2. Nandroid backup - I made one the other day. If I go in, try another rom, and screw something up, I am under the impression that I could restore that backup and my phone be working like I never left it, including MetroPCS settings, correct?
3. Can anyone suggest a good program to backup and restore carrier specific settings, so that if I load a new rom I can quickly port settings over? Does something like this exist?
4. Finally, if all of this has been answered somewhere where I didn't find, feel free to send me to those links!
So I am using SuaveSmush as my current ROM, but I wanted to try a Froyo ROM out. I am currently using A2SD. When I flash the new ROM, it says that the card is damaged or not recognized and when I click on it, it wants me to reformat it. If the ROM (Froyo) supports A2SD, shouldn't I be able to use it right away, or do I have to revert back to an earlier state with the SD card and then repartition it when on Froyo?
View 2 Replies View RelatedA couple of days ago i rooted my phone but just flashed engtools3. This morning i decided to try out a new ROM. I flashed XTR 3.01 and was going through the setup and was asked to activate my phone. My phone has already been activated and i was wondering if this is normal when flashing a new ROM and if verizon is going to re-charge me for the activation fees?
View 1 Replies View RelatedI didn't post this in the applications forum since this seems to be an issue specific to the Eris. I hope that's alright.Using Seesmic 1.2 but I had the same problem with 1.1. I have Background Notification checked, Vibrate, Ringtone and Flashing LED unchecked. Even though I have it unchecked the LED starts flashing whenever a new tweet arrives. I would just like to have the notification in the status bar and no other form of notification.
My friend has a Motorola Droid and doesn't have this issue at all which makes me think it's only on the Eris. I tried contacting support and they weren't able to solve the problem. Google doesn't turn up any similar issues either.I'm hoping a fellow Eris owner and Seesmic user could chime in and let me know if they experience the same behavior. At least let me know that I'm not crazy and tell me this happens to other people.
I just rooted and flashed to khaosfroyo last night and didn't realize that the camera didn't work until today. So now I want to flash to CELBFroyo1.9 but I am not sure what I need to do to flash that one.
View 4 Replies View RelatedWill flashing a new ROM over an existing one wipe out all the apps and settings. including contacts? If so then what is the method to backup and bring it all back. To much of a pain to continually re-install apps and resync (particularly since HTC sync doesn't work very well).
View 10 Replies View RelatedImagine my surprise when I went to open a purchased book on my Kindle App, and was told that I had exceeded the max number of devices registered to my Kindle account. Upon further investigation, I found that each time I flashed a new rom, it registered as a new device on my Kindle / Amazon account! This was easily rectified by deregistering all but the "6th Eris Device" and I'm good to go. Just thought I'd share this with those readers here who use the Kindle App - no need to do a small flip-out, like I did.
View 2 Replies View RelatedSo I rooted a few days ago using Universal 1 Click Method and flashed Xxtrasense ROM immediately (in step 4 of the instructions below).
Step 1) download and install this APK:
http://dl.dropbox.com/u/8699733/erisone010.apk - VERSION 0.1.0
Step 2) Run, read disclaimer, press button
Step 3) Reboot, once rebooted your phone should have Amon's recovery. Yay.
Step 4) Use the recovery to flash rootme.zip that is now on your SDCard, or the custom rom of your choice.
Step 5) Go into settings, and turn usb debugging on. After you have root, please uninstall this app.
I want to try new ROMs and have read through a number of threads but its only confused me more on the next steps. Questions are:
1. Do I need to do a NAND or NAND+ext backup (I've done a NAND back up shortly after flashing the Xtrasense ROM)?
2. Is Titanium Backup the only way to get my Apps and data transferred to any new ROMs I flash?
3. At what point is a dalvik wipe required?
If someone is able to provide a step-by-step outline (similar to jcase's 1-click eris root noted above).
I've got the rooted 2.1, easy. I've got all the java and adk and what not I got the flash_image and recovery.img. The command prompts all work fine till the last command, (I've tried 2 different chain of commands both work until a certain point).
adb shell mount -o rw,remount /dev/block/mtdblock3 /system
adb push recovery.img /sdcard
adb push flash_image /system/bin
adb shell chmod 755 /system/bin/flash_image
adb shell flash_image recovery /sdcard/recovery.img
(After this one it says it cannot find flash recovery or image, cant exactly remember.)
- Open the Terminal and copy and paste the following commands with the phone connected to your computer.
- adb shell [hit enter]
- su [hit enter]
- flash_image recovery /sdcard/recovery-RA-eris-v1.6.2.img (once again not found but I believe I followed correctly) this the end of commands the first half worked fine.
I rooted my phone using erisuser1's rooting for dummies method - this went off without a hitch, I followed the instructions to the T. I put several custom ROMs on my SD card (using the USB, and properly ejecting the phone as a drive) including KaosFroyo v37 and v38, CELBFroyo 3.6, PlainJaneT2_V2, and Vanilla_Tazz_19.I tried flashing each of them (following the wipe of the system info and the Dalvik cache) and all but the PlainJane got stuck in bootloops that lasted a long time. I waited anywhere from 15 minutes to a few hours, and none of the others ever loaded up. I'm fine using the PlainJane and happy to have the other features of root but am wondering if there's any advice or suggestions as to why none of the other ROMs worked for me?
View 24 Replies View RelatedI've been trying to get the flashing LED light to change colors when I receive a message, but it has yet to work. Any suggestions?
View 6 Replies View RelatedI have an eris flashed with PB00IMG and I believe I have root access. I am able to remove apps through terminal. I cannot get the google maps to update. I have removed maps.apk, htcnavi.apk and com.google.android.maps.jar. I have removed these separately and all together. I have been able to get it to update before, but I reflashed the PB00IMG because I could not get youtube videos to play without the stock browser. I got the youtube videos working again but cannot remember how to get the maps to update again. I wanted to try flashing different roms. I have downloaded a couple, placed them on the sdcard, and booted but I cannot get them to boot.
View 1 Replies View RelatedWhile charging my phone today, I noticed that my LED started flashing and alternating from red to green. It was plugged into my wall and I was using it while it charged. I suspect this means Im using more juice than Im gaining because my battery was losing power. It also heated up more than usual. Returned to normal once I left it alone.
View 15 Replies View RelatedI am running plainJane and want to change my font by flashing .zip on recovery. Can some one either point me to a list of fonts or post a list that I can download straight from my phone?
View 2 Replies View RelatedSo I never had a problem with my Eris's haptic feedback or vibrate when I get a text until I played with my friends Incredible. I really liked the haptic feedback and was wondering if there were a way to edit it either through an app or flashing a zip in recovery.
View 2 Replies View RelatedIs it possible to backup all your apps using something like astro, copy them to your computer, compress them into a zip file, move that back to your phone and flash that after flashing a ROM to restore your apps, is this even possible or is it more complicated than that?
View 3 Replies View RelatedI had motorola defy before my xperia z. Defy had something called bootmenu which let me switch on adb while booting a ROM. Now i have xperia z, its bootloader unlocked, a rom cooked by my own which is in bootloop. It doesnt have bootmenu to do like i did for defy. How do i switch on adb from the phone's side? I have setup adb perfectly on my computer.
My ROM goes into bootanimation but adb doesnt seem to be switched on in the phone' side.
when i type "adb logcat log" it is stuck at "waiting for device " while the bootanimation goes on into bootloop
I have a rooted evo, fresh 3.2, and noticed this morning that my sdcard wasnt mounting, so i did a hard reset and now am stuck in a bootloop, i can enter recovery and bootloader, but since sdcard is not mounting can not preform a nand restore any ideas?
View 2 Replies View Relatedim building a rom base on aosp kitkat but it will not boot. It just get stuck on bootanimation.
Any way to logcat on bootloop or something?
What ways I have to troubleshoot the problem or the cause.
Atrix HD using ProBAM rom
I installed an RUU with an update utility which fixed a WiFi problem I was having. Everything looked good so I immediately tried rooting with zergrush which seemed to work until my first re-boot. Now the phone is stuck in a boot-loop.
I have two utilities for RUU versions. I've flashed both of them at least three times each but its the result is the same every time. The phone boots normally the first time, then goes into loop on the next restart.
One issue that I noticed that when I re-lock the bootloader in fastboot, I get an error message. It goes something like...
(BOOTLOADER) Lock Successfully....
FAILED (unknown error)
However, when I go back to bootloader, it says **** RELOCKED **** at the top. Maybe whatever is causing the "unknown error" is also interfering with the re-lock procedure. It may not be truly re-locked.
I really just want to get this phone back to stock condition so that it works like it should.
my phone is stuck in a bootloop. and its Not rooted. all i can do is go to the boot menu. I want to use ADB to see if i can read the phone data (like sms...). Is there any chance that the device will be recognized when i connect it to the PC by usb with ADB?? or is it impossible? maybe ADB needs the phone to be operating normally to be recognized.
View 9 Replies View Related