I'm about to travel a couple of hours to an interview and I need the phone working. I flashed it, then rebooted and its been stuck on the white evo screen for over a half hour. Its not rebooting constantly so i don't think this is a 'bootloop' per se. What do I do? Pull the battery?
View 4 Replies
I did the gscript way on rooting the phone and that was a success but when I'm trying to flash the Plain Jane rom it would work but then when needing to be restarted it would just go into bootloop like have the ERIS screen then appear with the Plain Jane over the top of it and just repeat itself forever. What am i doing wrong?
View 12 Replies View RelatedI have tried flashing several kernals with different ROMs, but more often than not, my phone just ends up restarting over and over. after i boot it, when i flash the kernal, I would be playing with it then all of a sudden it would freeze up on me and start boot looping. I have cleared the dalvik and cache before flashing ROMs and kernal. I rooted via 3.21 unrevoked and it says on the top of hboot s-off. The only kernal that has worked is netarchy-toastmod 4.1.8 bfs. any idea what i could be doing wrong?
View 22 Replies View RelatedCant enter recovery as that reboot loops the cyanogenmod image, can I maybe use a custom flasher and flash the euro open BIN?
View 2 Replies View Relatedto get out of bootloop that occured due to flashing zip file via CWM on my micromax canvas 2 plus phone which is the safest way ? I dont want to lose any data...
View 5 Replies View RelatedI had motorola defy before my xperia z. Defy had something called bootmenu which let me switch on adb while booting a ROM. Now i have xperia z, its bootloader unlocked, a rom cooked by my own which is in bootloop. It doesnt have bootmenu to do like i did for defy. How do i switch on adb from the phone's side? I have setup adb perfectly on my computer.
My ROM goes into bootanimation but adb doesnt seem to be switched on in the phone' side.
when i type "adb logcat log" it is stuck at "waiting for device " while the bootanimation goes on into bootloop
I have a rooted evo, fresh 3.2, and noticed this morning that my sdcard wasnt mounting, so i did a hard reset and now am stuck in a bootloop, i can enter recovery and bootloader, but since sdcard is not mounting can not preform a nand restore any ideas?
View 2 Replies View Relatedim building a rom base on aosp kitkat but it will not boot. It just get stuck on bootanimation.
Any way to logcat on bootloop or something?
What ways I have to troubleshoot the problem or the cause.
Atrix HD using ProBAM rom
I installed an RUU with an update utility which fixed a WiFi problem I was having. Everything looked good so I immediately tried rooting with zergrush which seemed to work until my first re-boot. Now the phone is stuck in a boot-loop.
I have two utilities for RUU versions. I've flashed both of them at least three times each but its the result is the same every time. The phone boots normally the first time, then goes into loop on the next restart.
One issue that I noticed that when I re-lock the bootloader in fastboot, I get an error message. It goes something like...
(BOOTLOADER) Lock Successfully....
FAILED (unknown error)
However, when I go back to bootloader, it says **** RELOCKED **** at the top. Maybe whatever is causing the "unknown error" is also interfering with the re-lock procedure. It may not be truly re-locked.
I really just want to get this phone back to stock condition so that it works like it should.
my phone is stuck in a bootloop. and its Not rooted. all i can do is go to the boot menu. I want to use ADB to see if i can read the phone data (like sms...). Is there any chance that the device will be recognized when i connect it to the PC by usb with ADB?? or is it impossible? maybe ADB needs the phone to be operating normally to be recognized.
View 9 Replies View RelatedAre the framework-res and SystemUI apk's the only files that are involved in the boot process?
I only ask because I am currently stuck in a boot animation loop. I am able to communicate with my phone via adb during the animation loop and while in the bootloader recovery. Wiping the data and and factory resetting doesn't solve the problem.
I am thinking about pulling those two files from my wife's phone which is the same phone (Samsung Proclaim) and pushing them to mine.
I am stuck in a CWM bootloop. I can install rom and backup from CWM but it just boots back to CWM. If i try to get to bootloader for fastboot mode I get put right back to CWM.
View 2 Replies View RelatedI did a search and found no information on a similar situation. Here's what happened. I recently rooted via unrevoked 3.21, then flashed a stock rooted rom, by OMJ, his most recent ROM. I ran the phone for a day with that ROM and kernel that it came with, and everything was working good, battery life seemed good for the day. Well, I decided to flash the 4.19 netarchy kernel this evening, and after doing so, the phone got stuck in bootloop, and I had to do a battery pull. TO flash the kernel, I did this: flashed from clockwork recovery to RA 1.8. Wiped cache, wiped dalvik cache, flashed kernel from SD card, rebooted phone. Then it was just stuck in bootloop, endlessly rebooting. I pulled battery after about 25 minutes, and rebooted into Recovery, which was RA at this point. I wiped all data, cache, davlik. flashed the OMJ ROM again, flashed the netarchy kernel, rebooted. same thing. Pulled battery again, rebooted to recovery, wiped data, cache, davlik. Flashed ROM, no Kernel this time. Booted fine. went into ROM manager, flashed back to clockwork. booted to recovery. wiped data, cache, davlik. restored nandroid backup from earlier today.....
View 10 Replies View RelatedI am selling my old galaxy s due to having a new phone and I have made it freeze when it boots.
It was flashed onto myICS when I was using it and before handing It over I wanted to wipe everything so it was clean for the new owner. I did this in the phone options and then also in recovery mode to make sure, but after rebooting it is just stuck at the galaxy s boot loader.
I tried flash another Rom onto it and the same thing happened even though odin said it was successful.
So my galaxy note 2 is continously bootlooping. As soon as I insert the battery into the phone, it shows the galaxy note 2 screen and a couple seconds later the same. I can't enter download mode because when I click the Volume+ button to enter it, it starts from the galaxy note 2 screen.
I had flashed cyanogen mod 11 to my phone a couple months back, but it was working fine. Today morning some water got on it, but I dried it of and it was working fine.
I have a rooted Xperia C. I tried to install Chainfire 3D without knowing that it's not compatible with jellybean devices. :facepalm:
now my phone is stuck at bootloop. it's stuck at the image after the xperia logo. I tried to go to recovery mode but I can't. Maybe because my phone is bootlocked.
I managed to root and install xrecovery on my x10 mini(elcair) with flashtool. Took the next step and tried to install CWM recovery, and use it to run miniCM6.After the white sony ericsson logo disappeared, the blue android with the spinning light appeared, but now it seems get stuck here.
I tried using PC companion to restore my phone, but when my phone go into flashmode, there's a windows pop-up saying the USB driver failed to install and USB device cannot be recognized. Tried using flashtool but it doesnt work either. When i tried charging the phone with the charger, the green LED light did not light up too. I was wondering whether its hardware or software problem.
I am making a porting rom aosp for nexus 4 to a LG optimus G, after doing the rom, the flash normally but the device stays in bootloop and how to get a logcat and see what the errors are.
View 2 Replies View RelatedI was playing around with the Ubislate 7ci tablet, which is basically a generic Android tablet with stock ICS. Since it is not supported well, I went thru multiple documents and rooted it, After a lot of tries installed ClockWorkMod 4 too and took a backup. But after that I went one too far and installed ClockWorkMod touch 6, which pushed my system in to a bootloop. I am not able to go to recovery, adb / fastboot is not recognizing my tablet.
I tried writing the boot.img and recovery.img to SD card using win32diskimager, but the tablet is not booting from the SD card.
I have the backup files from ClockWorkMod and a tablet which bootloops (not able to go in to recovery or adb/fastboot). Is there a chance of reviving the tablet?
I searched the forums, looked like everyone who had this problem rooted their phones and installed custom roms, however i did not tamper with the phone in anyway, no rooting or custom rom, just nothing, this is the 3rd time in 6 weeks i get stuck in an infinite restart loop, i did two factory resets and i can't just do another one.
So far i have tried:
1-installing an antivirus and scanning (nothing found)
2-restarting in safe mode, the phone continued to restart in safe mode
3-uninstalled new apps that i installed recently
there has to be a way!!
my phone is stuck in a bootloop. all i can do is enter the boot menu. I did a factory reset but the bootloop issue is still there. Im not root. S-on. I can only think of sending the phone to the htc repair center, or is there anything else i can do?? the phone is still under warranty. can i try going root or S-off in order to try to fix the bootloop?
View 3 Replies View RelatedI am relatively new to Android and last night was my first experience with flashing custom ROMs. After a couple months of reading many different articles and threads on xda and other sites, I tried to make sense of what rooting and flashing meant and was all about. I successfully rooted my device and then last night I tried to unlock the bootloader which I think I did correctly. Then, I tried to install CWM on it which I think also worked. The problems started from then: Rebooting into recovery didn't work (it only gave me a black screen) and I tried to find some solutions online. There wasn't much luck but somehow after many attempts, I was able to boot into recovery. From there, I wiped my data and settings (It wasn't factory reset before), wiped the cache, and wiped the dalvik cache which went all well I think. Then, I tried installing the latest CM10 nightly for the L7 and midway through installation, the phone just rebooted itself. And now, it's stuck on bootloop. I tried many different things and even formatted the system which I think made it worse.
The Quick Details:
-LG P705G (Canada, Fido) was running stock ROM V10e i think
-was rooted
-i think bootloader was successfully unlocked
-stuck on bootloop
-formatted the system and now only LG logo appears when I boot (no CM logo)
why I am now getting a bootloop only when connected to my laptop via USB? I am rooted. Installed Nextheme V.2 And that is when this started....
View 4 Replies View RelatedI did something stupid and tried to put the Galaxy S status bar on the D2 without realizing it is for the X. Now it's stuck in an endless bootloop. What should I do? I was trying to do the D2 2.2 SBF but how do I connect since it keeps rebooting? EDIT: Found some info online during my panic. Allowed me to start the SBF, hopefully it works. "Power on holding the power key and the Up arrow key on the keyboard. After the M logo appears, release the two keys. That will put your Droid into the bootloader, then you can connect it to your PC via USB and use the SBF post to bring your phone back to normal."
View 3 Replies View RelatedI decided to take the plunge today and load up FroYo on my X. Backed it up and wiped it through ROM manager then loaded FroYo through it. Got into it and went to do a restore from Titanium Backup only to realize that i had forgotten to do such a thing prior to loading FroYo. So i decided that since I have never flashed an sbf before that I might as well try it so i could restore the nandroid i made right before updating and then back it up with Titanium Backup and then go back to FroYo. In hindsight, this may not have been the smartest thing I have ever done. Ive loaded the sbf file 3 times now i think, RSDlite says its rebooting the phone, then after a while it says please manually reboot the phone and at some point before then my phone starts boot looping on the eye. I'm running on win7 if that makes a difference, i installed everything from the bomb and followed the instructions for flashing in windows from there as well.
View 3 Replies View RelatedQuite mystic issue with my Hero. Never dropped my phone and always handle it with care. Suddenly couple a days ago with normal daily usage screen goes black. I think it was a normal crash and pull out battery for reboot. Device rebooted normally but when it comes to SIM Unlock screen there was only empty boxes without numbers so I again pull out battery and now phone stucks in Hero splash screen almost 10 minutes and reboots over and over again. If I boot up with pressing down HOME and Power nothing happens. it just again HERO Splash and boot loop. When I press BACK and Power in FASTBOOT-menu there is TOUCH PANEL-fail. I think my touch screen is broken or there is some other things totally messed up (???) but what confused me is why I cannot access recovery mode with HOME + Power. Anyway I reinstalled Stock ROM in Fastboot-mode but phone is still in bootloop.
View 3 Replies View RelatedI downloaded Ditto Note 3 for my note 2, and i flashed it. It didn't work so whatever. After reading on the thread a little longer, it said i needed to flash a kernel. So after flashing ditto note 3 and the kernel i rebooted my phone to see that it was stuck on the Note 2 logo. I thought it was all fine until i booted into recovery mode to find that cwm would make my phone restart. I have backups of cm11 and stock touchwiz, can i flash them with odin? Can I go into my storage and take them out?
View 2 Replies View RelatedI recently got a Huawei y220 and rooted it and enabled USB debugging, tweaked the SystemUI.apk and it all went good, I had no problem rebooting. I also changed my bootscren with BootScreen from the Play Store.
But today, my phone got stucked in bootloop, and i know why, I changed the /system/fonts permissions to 666, and also when I was trying to change the default font (DroidSans.tttf and DroidSansBold.ttf) copied a font file, so in that folder there was some permissions changed and an extra font. I had to to do something so i locked my phone. When I returned a couple of minutes later the phone was like off, so i removed the battery and rebooted it. It got stucked on my boot screen, and didn't showed me my ADW launcher.
I can't install CWM as there is no file for this model (because it's very new), I can't flash anything as far as I know. Tried downloading the official "upgrade" from Huawei, copied the file, but I can't seem to enter the "Software Upgrade Mode", (VOL UP + VOL DOWN + POWER KEY), I press those keys for about a minute and nothing happens.
I know my phone isn't fully bricked, for now, so, how can I change those file permissions through my PC or Linux? I can enter the bootloader screen.I also tried AromaFM, but i get a signature error.I've already wiped/factory reset and wiped cache.
I got the phone from 3 UK on a contract in July, so phone's pretty new and not rooted or anything.
Yesterday the phone started turning itself off at random times quite a lot.
Battery could have been over 60%, at 30%, it was never with the same charge that it would happen, also never when doing the same thing on the phone.
Usually when it's about to turn itself off, I lose signal completely, then the screen just goes black.
When I try to turn it back on, it usually dies again at the 3 logo or even at the Samsung one and I have to try and turn it back on again. Sometimes I had to pull the battery out and connect it to the charger to make it boot up ok.
After a couple of times it did that, it started going into a bootloop when attempting to turn it back on again after the random shutdown. Phone wasn't hot either.
It had happened a few days before but just once not this many times in one single day.
I removed the microSD card, since it makes the phone think the device has been modified and won't let me update, but the microSD works fine in my old Samsung smartphone and even with that removed, phone still turned itself off and then went into a bootloop.
I think it might be the battery. Last time I was using the phone unplugged yesterday night, the battery went down to 33% charge in less than an hour and phone turned itself off. After managing to make it boot up again and connecting it to the charger, it was saying 60% charge. I doubt it could have gone up to 60% being plugged in just for a minute or so.
So, I can certainly take it back to the store and have them fix it or buy a new battery and see if it solves the problem.
Is it likely to be the battery that's malfunctioning?
Lots of people on the Internet seem to have this problem and a few mention a swollen battery. They replaced the battery and phone was fine after. Mine seems ok, but I can't be sure.
I don't understand why I seem to lose signal completely just before it switches itself off... it doesn't do it all the times, but a lot of the times yes.
I have other phones on 3 and they didn't lose signal completely and anyway in my house coverage has always been excellent.
I forgot to mention that once, while trying to restart the phone, I got this message, more or less: "Installing custom OS can damage your system or applications. Choose volume up to continue...". My phone's not rooted and I haven't installed any custom ROM!
I just want the device to function again no matter what way. (Don't care if it's factory reset completely it has nothing on it I was just using it for a bit of experimenting).
So anyway, I have an HTC One x that I tried to install Cyanogenmod mod on but when trying to flash it (I was a bit impatient and just did what I thought would work), it didn't work and I'm stuck on the HTC Boot screen. I can still restart the phone and get to the recovery menus or whatever they're called. But even when doing a factory reset it still just won't get past the boot screen.
I thought I might experiment with rooting and all that, (I don't want to do this to my main driver, the Z1, for the life of me).