General :: Using Android Tablet As Touchscreen For Windows 8 Installed On PC
Mar 15, 2012
We can setup a vnc software or use remote desktop in windows 8 to access it on any android tablet with a vnc software.I have installed windows 8 on my pc and I do not have a touchscreen.I have a 10.1 inch android tablet. I have setup remote desktop on windows 8 and can access my pc's display on my tablet. But it can be used only with the mouse pointer given on screen. When I try to slide my finger on the screen for example, to navigate in the new start screen, instead of scrolling, the display of the screen moves and the blank space appears. This is because the vnc app is designed to work with a pc os that requires mouse.
But since this is windows 8, optimised for touchscreens, I want to use my tablet as the touchscreen monitor for windows 8 to use it as a tablet. I will keep my pc on and access it o n my tablet. Is this possible? Does vnc software for android that supports touch input for windows 8.
View 1 Replies
Oct 23, 2012
I have a problem with my chinese generic tablet:
Model: Mahdi M6
Android: 4.0.3
Led: Blue[url]...
My girlfriend dropped a glass of soda on it, I could clean and dry all now works perfectly the screen, but the touch screen stopped walking.
I wanted to get into recovery mode (Vol Up + Power) but I get an android with a red triangle and did not display any options.Get the manufacturer to install ROM from SD but since I can not go into recovery mode I find it impossible.Know it's a generic Chinese tablet but how I could do to get it working again.
View 1 Replies
View Related
Jun 5, 2013
I encountered one issue when hacking my HTC One XL, the touchscreen was unresponsible after installed CyanogenMod(cm-10.0.0-evita stable version)
I followed the installation guide mentioned in Cyanogen wiki..Unlocked with official HTC Dev Unlock and flashed eyeballer's recovery attached in above installation guide, whole procedure is smooth without any errors.Already wipe the cache and system, also factory reset before installation.
But after installed the stable CyanogenMod cm-10.0.0-evita.zip, touchscreen was unresponsive fully, buttons (power and volume) can work normally. When I rebooted to recovery mode on device, touchscreen function was back and worked well.The basic info of my device as below:
Asia Pacific device
Jelly Bean 4.1.1, HBoot 2.14
HTC Sense 4+
Software Version: 3.17.708.5
HTC SDK API: 4.63
Kernel: 3.4.10-g240d4d5
Baseband: 0.23a.32.09.29_10.128.32.34aL
Internal Version: 3.17.708.5 CL134054 release-keys
Following quoted administrator's words in CyanogenMod Forum:
"It is likely due to a firmware update that was put out by HTC in a later version of their software. The same problem happened with the regular (non-LTE) HOX. Luckily, with the regular HOX, the developers were able to find a working kernel version that brought back the touchscreen. Since work has halted on the HOXL due to a DCMA takedown notice on github, I don't know if the maintainers have worked with newer kernels. However, it may be worth checking on xda and see if there are any updated kernels or CM builds that address this issue."
"Due to the DCMA takedown notice to github, unless it gets resolved, it is likely this won't ever see another official release (whether nightly or stable). You would likely need to resort to the xda forum for people compiling their own builds."
View 1 Replies
View Related
Jul 26, 2013
I've buy ainol novo 10 hero quad a few month ago. Few days ago when I was flashing the firmware But i've instal the wrong firmware from Ainol novo 10 Ethernal. It onn's but the touch screen was "crazy" it was inverted, to push the button on the down left corner of the screen I must touch in the same spot in the upper right corner, to scroll home screen right I must slide my finger left e.t.c.
View 6 Replies
View Related
Dec 16, 2012
I have a iconiaa200 nvidia tegra 2 dualcore and 1gb ram and i need to install windows or run windows game because i have an pc but i can use only at night and the day i have to be with my iconia. I play a game its call metin2 is not a very requirements games only a pentium3 nedded. Is there a way i can play that game on my iconia? Sry for bad english but i hopr you understand. And i have a adapter usb than i can put 2 usb. Mouse and keyboars i have the two.
View 6 Replies
View Related
Mar 6, 2013
wanted to know if its possible to add android on a windows 8 tablet, i am getting offered the tf600 instead of the tf201 ?
View 1 Replies
View Related
Jul 21, 2012
Is it somewhat possible to have fastboot installed as an apk on my tablet (Android) in order to flash things on a smartphone plugged in that tablet.
Scenario is: wife wants my notebook; I want her tablet. If I could use adb and fastboot from the Android tablet, I could really do everything with it and the swap may happen
View 4 Replies
View Related
Feb 9, 2013
I is it possible to instal Windows mobile on an Android Tablet with ARM procesoor ?
View 3 Replies
View Related
May 29, 2012
Where I can get the device driver for the Ampe A10 10.1" tablet.
Windows 7 x64 detects a device called "Android" when you connect the tablet and says no driver found.
The tablet does not appear on the device chooser in the eclipse development environment.
View 2 Replies
View Related
Apr 23, 2014
Can I install windows 7 on my samsung galaxy note 10.1 (gt-8010)?
View 1 Replies
View Related
Jul 20, 2013
Is there a file on the tablet that holds the names of all installed apps? One that is readable to copy off so I know what apps i've installed.
View 4 Replies
View Related
Oct 3, 2013
I purchased this Zync Dual 7 Plus(Haipad HD 7 Zync Edition) (Zync Z930 Plus in the Manual) and became fascinated by the world of Android OS. My problem is I downloaded Chainfire 3D app from Playstore as recommended by my friends. After installing, it require a reboot so I restarted the tablet and then I'm stuck on the boot screen logo. I manage to get to the recovery page using ADB reboot recovery command but my tablet only has a power button. There's no physical volume buttons everywhere I looked so there's no way I can reach the "wipe data/factory reset" option. ADB Devices command can detect the devices but it is giving me weird serial number as 0123456789ABCDEF, Fastboot is not detecting the device. USB Keyboard and touch functions are not responding when I'm in Recovery page.
What I have done so far...
I've read several solutions and one of them is to flash the tablet using the ROM provided by Zync support. DL it and open the RockChip Batch Tool but the tool is not detecting my device so I can't upgrade.
Also DL the LiveSuitPack 1.07 but also, It is not detecting the device and from the instruction given, you need to hold volume button again which I don't have.
View 7 Replies
View Related
Aug 27, 2009
Can we uninstall android Application packages such as Music, Media Provider application and re-intsaller it in windows android emulator? I've modified source code of these applications in android source code in linux machine, now I wanted to install APK files in windows Emulator. Can I do that?
View 2 Replies
View Related
Mar 18, 2010
I wonder if ne one had an major issue with their touch screen before like I had with mine. So I decided to post this little story. Let me start off with a little background info. I got my droid november 6, 5 46am central time zone. don't ask me how but the vzw dude was letting me earlier cuz I had work. I was so happy that day leaving t mobile I did love my g1 but wen I read all about the droid I felt likt I had to leave her and move on. She did do a lot for me but time tells all and it was my time go and move on.Untill two months ago (Present time I'm talking in) I realized not everyone has the bubbly keyboard. I saw friends at my unit (I'm in the army reserves) that bought the droid a couple of months after me had flat keyboards n they were bitching bout how flat it was. I agreed with them since I was woth a g1 the keyboard was a bit flat but nothing to were its such a pain, so my friend shows me his keyboard and I looked shocked played with it was like wow and I pulled my n did a side by side side comprasion and this before I saw the bubbley keyboard thread on here. So unforunately my toucscreen starting doin its own thing like it was ghost writer and spazzing out. I had no control over it this happened monday nite and I was dreading it that I will end up replacing it. But it would not let me do nothing.I couldn't go ne where on my screen it would randomly hit different icons to the point were sum times it would call my contacts. I only had control over the physical buttons. So on Tuesday during work I fought the ghost writer to let get to setting a do a system restore. First minute of the set up was ok but right wen it finish and I was on the home screen again. I was like FUDGE I don't want to replace my rare Droid. After work I replaced it, I was real pissed I had the bubbly keyboard and (something I didn't noticed untill I got my replacement) the golden plated volume side button. I miss my precious rare droid. I was soo proud to be first non employee to have the droid in houston.
View 10 Replies
View Related
Dec 31, 2013
I have a Nexus 7 tablet and every few days I notice a few new apps on the device. I'm not sure if they're full apps or just simply icons to download apps or get more information. I have tried to avoid using them. I know previously I had a couple apps that were sending notifications to the notification system that I considered to be spam. After some research I found out how you can find out which apps are doing it and disable notifications from those apps so that took care of that.
View 4 Replies
View Related
Jul 22, 2013
i have a chinese tablet (Teclast P98HD A2Q6) with some very good specs it has 4.1.1 but it's laggy there's another tablet called (PIPO M6) with the same processor and display & it has 4.2.2 with the latest SDK for the chip.can i upgrade my tablet with PIPO's firmware ?
View 9 Replies
View Related
Jun 15, 2012
I have two tablets but on of them I've flashed and messed up (touch screen is not working).
How can I get this to work? How can I get the touch-screen drivers and replace them?
View 1 Replies
View Related
Dec 29, 2012
I bought a cheap A-13 MID of the internet and flashed a firmware for another variant common problem with these devices so i have no touchscreen and the usb has snapped of tried soldering it but was unsuccessful.
I have recovery installed but only way i can use it is through novotools but need touch screen.
So i need a way to flash firmware through sdcard on boot (Can be done, can't find guide though)
Or a script that will run reboot-recovery.sh on boot from sd or maybe emmc
Or that will run when the sd is mounted so that if i insert an sd card into the device with reboot-recovery.sh script on it it will reboot to recovery
View 1 Replies
View Related
Jan 26, 2012
I have been trying to find a way to control my phone from a touchscreen. I have a samsung galaxy running android and would really like to hook it up to my touchscreen in my car. I know there is a module called mimics that allows it to be done. It is difficult to install into a monitor tho. Any way to connect it to a touchscreen another way? Maybe a Mirroring app and cable(s)? My galaxy has a micro usb out, it can be used as a video out maybe?
View 1 Replies
View Related
Dec 7, 2011
I ported ICS for my ZTE N760
booting but not unlock , touchscreen is not working
ts->input_dev->name = "Fts-touchscreen";
This file is used for FocalTech ft5x0x_ts touchscreen
How to write idc for this touchscreen
View 3 Replies
View Related
Oct 3, 2013
I wanted to root my new galaxy victory 4G LTE from Sprint and put a custom rom on it. Followed rooting guides and that worked fine. Then I went to find a rom that would work and all I found was victorious, which I was so eager to try I didn't even think to read that part that said VM only. Got stuck in a boot loop. That's where I made the real mistake and decided to try a rom for another galaxy model, a custom s3 rom. Ever since that my touchscreen has been unresponsive, soft buttons and hard buttons work though. Using ODIN I've tried to restore to stock, I've used KIES to try to update, and everything has worked as far as I could want it to, but nothing restored touchscreen functionality. I am able to get into the hard button guided recovery menu and download mode, but have been unable to get anything touch based to work, and cannot find a CM non touch recovery that will work with this phone.
View 3 Replies
View Related
Jan 1, 2013
The problem is with the touchscreen as it does not work. i have done a factory reset using a mouse but that did not work, is there anything else I can try like flashing it using my PC?
Also It looks like a protab2xxl clone
Link for tablet: Type this into Google search as i am unable to post links - " 10" Capacitive Multi Touch Android 4.0 Tablet Pc All Winner A10 universalgadgets "
View 4 Replies
View Related
Feb 11, 2014
I would like to play games using my physical keyboard to simulate various screen touches. I found various apps which do it for a Gamepad but bit really for a physical keyboard.
View 3 Replies
View Related
Apr 19, 2014
I try to fix these problems after compiled CWM for my device.
1 ) Touchscreen turned into touchpad.
2 ) Notification bar missing.
3 ) Softkey navigation missing
I had added 'qemu.hw.mainkeys=0' to build.prop
View 6 Replies
View Related
Sep 15, 2013
I own a Allwinner A13 7 inch tablet, on which I installed the Cyanogen 10 mod (Due to restrictions I cannot place the link to the mod)
The problem is I probably installed the wrong touchscreen driver, so the tablet boots perfectly into the Mod but I can't do anything. Normally it would be no problem to just put back my backup, but I can't get it to boot into CWM.
In the first place I rebooted into CWM to instal the mod by adding the following command through the "terminal app" before rebooting,
Command: "echo -e 'boot-recovery' > /dev/block/nandf; sync"
Now I cannot use the screen so i cant use the terminal. I also cannot use ADB because USB debugging is standard switched of after flashing a new MOD. Any other way to get into CWM??
View 3 Replies
View Related
Apr 2, 2013
Is there any way to disable the touchscreen while a video is playing so there is no possibility to stop the video accidentally touching the screen?
Example: I put a video for a small child and I wont the child could modify the video by tapping the screen
View 2 Replies
View Related
Feb 19, 2012
I couldn't use the phone while charging (solution maybe not 100% accurate naming, because i'm using german windows and am just translating it).
- control panel
- system and security
- energy options
- energy saving plan settings
- change advanced energy settings
- usb settings
- settings for selective usb energy saving
set both to deactivated
-> finally the touchscreen is not lagging anymore
View 2 Replies
View Related
Aug 10, 2013
Few days ago when I was flashing the firmware But I've instal the wrong firmware from Ainol novo 10 Ethernal. It onn's but the touch screen was "crazy" it was inverted, to push the button on the down left corner of the screen I must touch in the same spot in the upper right corner, to scroll home screen right I must slide my finger left etc.
View 1 Replies
View Related
Jul 5, 2013
My phone (Xperia mini pro) unlocks itself way too often when it's sitting in my pocket. I was using a MIUI ROM for some time and there was that cool feature that didn't allow to unlock the screen when the proximity sensor sensed something in its... proximity. I really miss it, but I don't feel like switching from CM to MIUI just for it.
I know there are lots of apps like Gravity Screen Off or Cover Algorithm, but they don't do exactly what I wan't to have (or I didn't explore them enough), as I don't want to lock/unlock my phone by the sensor or anything. just a simple thing:
0. the screen is locked and turned off
1. the home/power button is pressed
2. the app checks the proximity senor's state
2a. if something's covering the sensor (e.g. my pocket's inside), the touchscreen is disabled (and some message appears to say so)
2b. if nothing's covering the sensor, then unlocking the screen is allowed
Something like that in Play Store?
View 2 Replies
View Related
Oct 2, 2012
My Ideos slim 7 touchscreen is not working since a few days, and the usb debugging mode is OFF
I tried to re-install many firmwares ( the original one, MTN firmware etc), but the problem persists
is there a way to turn the usb debugging mode to ON from the computer so that I can use the fastboot ?
View 1 Replies
View Related
