General :: Touchscreen Fail After Custom ROM?
Oct 3, 2013
I wanted to root my new galaxy victory 4G LTE from Sprint and put a custom rom on it. Followed rooting guides and that worked fine. Then I went to find a rom that would work and all I found was victorious, which I was so eager to try I didn't even think to read that part that said VM only. Got stuck in a boot loop. That's where I made the real mistake and decided to try a rom for another galaxy model, a custom s3 rom. Ever since that my touchscreen has been unresponsive, soft buttons and hard buttons work though. Using ODIN I've tried to restore to stock, I've used KIES to try to update, and everything has worked as far as I could want it to, but nothing restored touchscreen functionality. I am able to get into the hard button guided recovery menu and download mode, but have been unable to get anything touch based to work, and cannot find a CM non touch recovery that will work with this phone.
View 3 Replies
Dec 18, 2012
I am using wt19i, after installing new custom rom my touchscreen and softkey are not working..........
View 3 Replies
View Related
Mar 29, 2013
After attempting to root my device with [URL] .... My device boots up, but touchscreen doe not work. What can i do?
View 1 Replies
View Related
Mar 18, 2010
I wonder if ne one had an major issue with their touch screen before like I had with mine. So I decided to post this little story. Let me start off with a little background info. I got my droid november 6, 5 46am central time zone. don't ask me how but the vzw dude was letting me earlier cuz I had work. I was so happy that day leaving t mobile I did love my g1 but wen I read all about the droid I felt likt I had to leave her and move on. She did do a lot for me but time tells all and it was my time go and move on.Untill two months ago (Present time I'm talking in) I realized not everyone has the bubbly keyboard. I saw friends at my unit (I'm in the army reserves) that bought the droid a couple of months after me had flat keyboards n they were bitching bout how flat it was. I agreed with them since I was woth a g1 the keyboard was a bit flat but nothing to were its such a pain, so my friend shows me his keyboard and I looked shocked played with it was like wow and I pulled my n did a side by side side comprasion and this before I saw the bubbley keyboard thread on here. So unforunately my toucscreen starting doin its own thing like it was ghost writer and spazzing out. I had no control over it this happened monday nite and I was dreading it that I will end up replacing it. But it would not let me do nothing.I couldn't go ne where on my screen it would randomly hit different icons to the point were sum times it would call my contacts. I only had control over the physical buttons. So on Tuesday during work I fought the ghost writer to let get to setting a do a system restore. First minute of the set up was ok but right wen it finish and I was on the home screen again. I was like FUDGE I don't want to replace my rare Droid. After work I replaced it, I was real pissed I had the bubbly keyboard and (something I didn't noticed untill I got my replacement) the golden plated volume side button. I miss my precious rare droid. I was soo proud to be first non employee to have the droid in houston.
View 10 Replies
View Related
Oct 7, 2013
I got busybox pro from the market but when I try to smart install it, it shows free space as 0.0mb whereas I have around 500 my left.
AUXUS Nuclea N1
View 8 Replies
View Related
Jan 11, 2013
I tried modding some APK to make the app able to be multi view (tutorial : URL... ), I succeed modding 8tracks.apk, musicxmatch.apk but then when I tried to do it to LINE (NAVER) and installed it, it said "app was not installed".
It is a system tool while building the apk, and it still doesn't work.why some people said to not sign a system tool apk? while from what i've read, android cannot install an unsigned apk. mod the NAVER/LINE Games to stop checking if i am a rooted device?
View 1 Replies
View Related
Apr 3, 2013
I have a clone Samsung Galaxy Note II N7102,
That's chip MTK 6577, but I can't load the rom on it.
The error message is firmware & chip set not match.
View 1 Replies
View Related
May 25, 2014
I try to install Android on my Acer W700 by follow the guide on this site but it always failed at "Creating filesystem with parameters"....
I tryed with different version of android and install the lat version of BIOS but it's never work...
View 1 Replies
View Related
Feb 10, 2012
I was trying root my Galaxy S2 HD LTE that i just got from Korea (I am based in the UK)
Was trying to install ICS on this - not sure I have fubar'ed the device or just that my korean is not up to it, but I cannot figure out what I need to do.
Basically i got to the stage of installing kies, then Odin 1.85, and was following the "Firmware I9100XXLPB Android 4.0.3 (Ice Cream Sandwich) for Samsung Galaxy S II I9100" link
I have tried to reset the device to no avail.
View 4 Replies
View Related
Mar 14, 2014
I am trying to go back to stock android 4.2.2 Galaxy S4 Mini SPH-L520, and getting the following error from Odin,
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..[code].....
View 1 Replies
View Related
Feb 12, 2014
I have a verizon samsung galaxy s3. I'm planning to upgrade to the kitkat 4.4 but I was going to do a nandroid backup first. Using rom manager I am attempting to go into recovery mode but everytime I try I get this message:
System software not authorized by Verizon Wireless has been found on your phone. Please turn off your phone and go to the nearest Verizon Wireless store for support.
I disabled the knox sensor and then totally removed it and it's components. I don't know what else to try.
View 1 Replies
View Related
Feb 15, 2012
I followed everything from the [HOWTO] Root the Atrix 2 thread and i tried both 1 click method and the manual method.When I type in
---> adb shell (only type this if you are no longer in shell@targa)
---> mount -o rw,remount /dev/null /system
in the cmd, shell not found and Segmentation fault came out.
View 2 Replies
View Related
Jan 5, 2013
My HTC Wildfire (Buzz), i made it S-OFF , Rooted it (i guess) and succeessfully changed its rom to MIUI 2.3.7 . Before changing the rom i backed up the stock rom .The problem comes to whenever i boot to recovery and reach to a point where i am to select if i want to install zip file from sd cards and other selection, i am not able to install or access anything from sd card. Even when i tried to restore the backup using Rom Manager it fails.
> I really want to restore the back up or install another very stable rom compatible with my HTC Wildfire
> When i hold vol- and power buttons and try to go to recovery, the phone hangs at the Revolutionary logo !
THE MIUI is slow and can't withstand stress as every time i try to do something fast it displays error messages.
View 5 Replies
View Related
Feb 15, 2014
I am trying to Port the Mokee 4.4.2 and have become some what successful as it boots... but my story ends there it self !!
After it boots at the first screen itself a Pop up appears mentioning that " Unfortunately , the process com.android.systemui has stopped "
I have tried replacing the SystemUI.apk but still the problem persists !
View 4 Replies
View Related
Dec 2, 2012
HTC ONE X
my one x is stuck in the boot logo " htc quietly brilliant" screen and not responding to go to the OS 4.0.4
when i connect it i hear the sound of the usb connect but cant see it on "my computer"
i tryed to do fastboot but fail*
i tryed to do recovery reset mode and and it transfer me to the clockworkMod Recovery but in the "install zip from sdcard" there is no files it
looks like the phone as been format and there is nothing on him
how can i install a new OS on my phone again ?
p.s - when the phone is connected to the reset mode its say "fail to open usb master mode"
View 1 Replies
View Related
Feb 25, 2014
I have the Samsung Galaxy Tab 3, 7" (WIFI-ONLY).
Firstly, let's start by saying that I ended up rooting it after a while because it got boring having the simple, unmodified android.
It seems creativity got the best of me, and I ended up wanting to switch back to my normal android days. The problems started when I looked for the ways to upgrade my device, and it sais my device had been modified (rooted). So then I tried deleting SuperSU, thinking that would unroot, but nope... I then went to my great friend, we all know as Google. I then found the firmware, however didn't notice it said 3G, not just WIFI.... and loaded it onto my tablet following the instructions leading me to use Odin. I now have a Samsung Galaxy Tab 3 WIFI only, with 3G Firmware.
After countless hours, days, and now weeks of trying to get it back to the normal firmware, all my attempts result in an error on Odin, and here's what I get:
First, I just load the .md5 file, and this happens.
---
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..[code]....
Now, what do I do to get my precious tablet back to normal? , since I have the 3G version, I'm required to have a sim card which I can't put in because there's no sim card slot (it's a WIFI tab). I can't even use WiFi, because it won't turn on without a SimCard.
View 5 Replies
View Related
Dec 29, 2012
I bought a cheap A-13 MID of the internet and flashed a firmware for another variant common problem with these devices so i have no touchscreen and the usb has snapped of tried soldering it but was unsuccessful.
I have recovery installed but only way i can use it is through novotools but need touch screen.
So i need a way to flash firmware through sdcard on boot (Can be done, can't find guide though)
Or a script that will run reboot-recovery.sh on boot from sd or maybe emmc
Or that will run when the sd is mounted so that if i insert an sd card into the device with reboot-recovery.sh script on it it will reboot to recovery
View 1 Replies
View Related
Sep 28, 2013
I have a S4 (SGH-I337M) with Android 4.2.2 installed on it, Not Rooted, Not unlock. My problem is with the WIFI and Network mobile serviec (GMS, 4G).
1. when i turn the wifi on, it gives me fail to obtain IP, and at the same the mobile service detected my Mobile Network (Rogers) for moment then it turns to No service for few moment to come back to Rogers an other time and so on( like infinity loop between Service detected and No service).
2. usually when i turn off the WIFI, the phone goes to look for 4G network but this doesn't happen now, and still Mobile Service between detected and Not.
3. What has been said until now is with SIM card On. and i tried to take it out the phone and turn the phone on, and the same problem is still with Mobile Network service but now the infinity look (as I like to call it) is between No service and Insert Sim card, at the same time can't access to the WIFI (Fail to obtain IP).
i have tried several thing to solve problem : like changing the SIM card, Reset phone to factory setting, turn it off for while and open it, but the problem still excite.
it seems that it is software problem but i don't know which process responsible of Network Service setting (WIFI, 4G, GSM) so i can stop it and lunch it again.
View 10 Replies
View Related
Mar 29, 2014
I installed customROM works fine. then I reverted back to stockROM then IMEI is gone. I tried the Engineering mode thing, I tried multiple IMEI Writers non of them works for me. I always have this error "meta mode entry fail" for some reason I don't know what to do.
I do have an MTK Based phone its dual Sim.
MT6582
Cherry Mobile Fuze Q390
View 2 Replies
View Related
Apr 13, 2013
I'm using a galaxy nexus with the newest version of jelly bean. For the past couple weeks, ive been experiencing a constant barrage of gmail sign in failed error messages.
I am able to login to gmail using the gmail application, as well as the generic email application. in the google account settings, it is able to be synced, and manually syncing doesn't prompt the error message.
I googled this issue and came across a couple solutions - changing my password using the chrome mobile browser, clearing the cache, etc, but nothing seems to work.
Its getting fairly frustrating having this notification pop up every few minutes or so.
View 1 Replies
View Related
Jul 22, 2012
Putting jelly bean on nexus one
My Phone
Nexus One
CM7.2
hboot 0.35-0017
My Problem
Upgrading hboot. I've looked into the other posts. But in none (that i have looked at) they do "fastboot flash hboot". Maybe it's just the same?
I'm just following everything step by step (link)
Code:
$ fastboot flash hboot hboot_jellybean_260-8-168.nb0
sending 'hboot' (512 KB)...
OKAY [ 0.095s]
writing 'hboot'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 0.219s
My bootloader is already unlocked. Might it have something to do with read/write permissions?
View 1 Replies
View Related
Oct 19, 2013
i can't upgrade any firmware through the dload method.
I always see the error : Version list verify fail.
I tried starting from the b102,b226,b229 and everytime i have the same problem. My splashscreen ( oemlogo ) is deleted and now i see a white image, not the huawei logo.I can't upgrade with the official method and i can't use the intermediate pack, i see the same version list verify fail
View 2 Replies
View Related
Jan 26, 2012
I have been trying to find a way to control my phone from a touchscreen. I have a samsung galaxy running android and would really like to hook it up to my touchscreen in my car. I know there is a module called mimics that allows it to be done. It is difficult to install into a monitor tho. Any way to connect it to a touchscreen another way? Maybe a Mirroring app and cable(s)? My galaxy has a micro usb out, it can be used as a video out maybe?
View 1 Replies
View Related
Dec 7, 2011
I ported ICS for my ZTE N760
booting but not unlock , touchscreen is not working
ts->input_dev->name = "Fts-touchscreen";
This file is used for FocalTech ft5x0x_ts touchscreen
How to write idc for this touchscreen
View 3 Replies
View Related
Jan 1, 2013
The problem is with the touchscreen as it does not work. i have done a factory reset using a mouse but that did not work, is there anything else I can try like flashing it using my PC?
Also It looks like a protab2xxl clone
Link for tablet: Type this into Google search as i am unable to post links - " 10" Capacitive Multi Touch Android 4.0 Tablet Pc All Winner A10 universalgadgets "
View 4 Replies
View Related
Sep 19, 2012
While trying to sbf my Milestone X2 using RSD Lite v5.7 (I used an sbf file named "1FF-daytona-user-2.3.5-45.0.25-111011-release-keys-signed-ntelos-US.sbf") I encountered an error that said: Failed flashing process. phone[0000]: error switching phone to BP Pass through mode (0x70BE)
This Is what my device properties were
IMEI/ESN/MEID: N / A
Technology: N / A
Software Version: N/a
Flex Version: N/a
Bootloader Version: v0x000007
DRM Version: N / A
This is what my file properties were
Filename: 1FF-daytona-user-2.3.5-45.0.25-111011-release-keys-signed-ntelos-US.sbf
Creation Date: 09/18/2012 22:44:49
File size: 861170104
RAM DL Version: N / A
Bootloader Version: N / A
Platform: 4G TEGRA
HAB Type: Signed Production
View 1 Replies
View Related
Mar 19, 2013
To install to clockwork recovery manually I replaced the recovery.img file but when i restarted my phone it says:
Image signature verify fail
Your boot/recovery image may have an incorrect signature.
Please update your image to a signature official one
you can remove battery for power down.
now i can access only to pink screen, but when i connect my phone with a usb cable then computer only checks drivers etc but does not open a drive where i could change recovery.img back to normal.
Maybe some drivers are missing.. Also made video of it: [URL] ....
View 7 Replies
View Related
Feb 11, 2014
I would like to play games using my physical keyboard to simulate various screen touches. I found various apps which do it for a Gamepad but bit really for a physical keyboard.
View 3 Replies
View Related
Apr 19, 2014
I try to fix these problems after compiled CWM for my device.
1 ) Touchscreen turned into touchpad.
2 ) Notification bar missing.
3 ) Softkey navigation missing
I had added 'qemu.hw.mainkeys=0' to build.prop
View 6 Replies
View Related
Sep 15, 2013
I own a Allwinner A13 7 inch tablet, on which I installed the Cyanogen 10 mod (Due to restrictions I cannot place the link to the mod)
The problem is I probably installed the wrong touchscreen driver, so the tablet boots perfectly into the Mod but I can't do anything. Normally it would be no problem to just put back my backup, but I can't get it to boot into CWM.
In the first place I rebooted into CWM to instal the mod by adding the following command through the "terminal app" before rebooting,
Command: "echo -e 'boot-recovery' > /dev/block/nandf; sync"
Now I cannot use the screen so i cant use the terminal. I also cannot use ADB because USB debugging is standard switched of after flashing a new MOD. Any other way to get into CWM??
View 3 Replies
View Related
