General :: Galaxy S4 MTK6572 - Error 4032 (Enable DRAM FAILED) When Trying To Flash?

Sep 16, 2013

My phone is dead after I flash a wrong preloader my phone model is alps GT-I9500 mtk6572 . I try with ALL ROM on needrom.com with keyworld "alps" "GT-I9500" "mtk6572" ... about 20 ROM but I get Enable DRAM FAILED for each try

Use case :

1- Disconnet the battery and wait 10 seconds

2- Open flash tools with the scatter file

3- Connect the phone usb cable to pc

4- Plug the batterie on the phone
==> MTK USB PORT (COM XX) ok : drivers on the pc seems to be ok

5- On flash tools press download
every time I get BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)
[EMI] Enable DRAM fail

on the web they say the cause is the wrong ROM but I don't know (I try over than 20 ROM)

General :: Galaxy s4 MTK6572 - Error 4032 (Enable DRAM FAILED) when trying to flash?


General :: Galaxy S4 MTK6572 Alps Clone / Error 4032 When Trying To Flash Or Anything

Dec 23, 2013

I bought an S4 clone, Manufacturer alps Model GT-I9500.

I tried with ALL ROM i found, and with GT-I9500_MT6572_ALPS-JB3(fix) ROM without success Even when i wana format or do memory test i get

Code:

BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)
[EMI] Enable DRAM fail

View 4 Replies View Related

General :: Cubot Screen Black - Enable Dram Failed

Mar 22, 2014

I have problem with flash phone, when I try flash it from SPFT v3 and v5 I have error "enable dram failed". Drivers work fine, I have plug my thl w200 without battery, in system appears pre- loader but when I plug cubot without battery system appears only MTK USB VCOM. In Cubot screen is only black, and nothing is appears. Chip is MTK6589T.

View 3 Replies View Related

General :: Unbrick NEO N003 MTK6589T - SP Flash Error 4032?

Jan 27, 2014

NEO N003 1/4g T13

I have flashed to newest Stock room from the website neo then i try magerto room he was fine as the beginning then after 2 days he start freezing and sometimes working then the camera is no longer working i tell my self its just poor room

i decide to use the stock room but after i flashed work normal for 10 minute then freeze the screen turn black utile you remove the battery and put back in 2 minutes after many times trying to flash it by sp flash tool i hit format ...my imei is gone and no signal on the sim card ( thats not a big problem)but the phone still freezing and restarting ...black screen ......after that the phone not able to turn on even the logo just black you can see he is trying turn on but no logo no nothing

in the device manager detect MediaTek Usb port before was detect preloader MediaTek somthing ......
look at the picture and the sp tool not working MediaTek Usb port and i got this error

this Morning accidentally i put the phone into Preloader Mode and make normal flash and my phone is a live a was very Happy i went to write the imei must root the phone...i have install root programe name is geno (he is work fine on lenovo P780) but in neo N003 he just freeze and tun off and no longer can trun it on again just black screen.

Now when i plug the phone via usb port windows detect it MediaTek USB Port how i can put it again in Mediatek Preloader VCOM ???Always get error 4032 on sp flash tool (format , upgrade, download) all he same error

View 9 Replies View Related

General :: Galaxy Note 3 MTK6572 Invalid IMEI

Mar 3, 2014

recently bought a Note 3 based in a MTK6572 processor, but the signal doesn't work, I've tried many methods to solve it but no one has worked, I don't know what to do. Obviously this happens cause the IMEI is invalid.

View 1 Replies View Related

General :: Galaxy S4 MTK6572 3G - Unable To Lock WCDMA?

Dec 1, 2013

i have s4 clone with this spec

Hardware : MT6572
Model : GT-I9500
Build number : ALPS.JB3.MP.V1.8
Build date UTC : 20130909-111615
Android v : 4.2.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V4, 2013/08/07 10:44
Kernel v : 3.4.5 (lxq@server2) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Mon Sep 9 19:14:10 CST 2013
Uboot build v : -----
LCD Driver IC : 1-otm8012a_fwvga

i cannot be able to lock wcdma, when i check the modem file i got modem_1_2g_n.img

is it hardware limitation or it can be tweak to be able to get 3G?

View 9 Replies View Related

General :: Samsung Galaxy ACE 2 - Create Folder Giving Error Creation Failed?

Jun 27, 2012

Im here because of my problem with SGA 2.Few days ago I bought ACE 2 and I found few problems with "external_sd".So the problems are

1. When I try to create folder it gives me error "Creation failed"

2. When trying to move folder from internal memory to external sd it gives me error like "Moving failed", while copying goes fine.

3. I can move/copy any file to sd card, but sometimes those files got corrupted, gives me error about memory when trying to open pictures, same problem when saved camera saved photo to sd card. Even getting error when trying to play video.

APK files got corrupted too.

4. When I have moved apps to sd card some while apps work great, but after some time cant launch apps because it gives me error about that app doesnt exist.

I tried formatting sd card with pc and android.

Factory reset.

Repartition to same firmware with Odin.

Wipe cache, wipe data.

I dunno what causes those error, bugs, glitches. Is it phone or android sytem?

Tried many sd card and always got same errors. But when I mounted mine sd card to another phone it worked perfect.

View 2 Replies View Related

Samsung Galaxy I7500 :: ROM Enable Root Failed - Stuck In Startup Loop

Oct 31, 2009

I have rooted my phone and have now the recovery mode from HD blog. It's was working fine. So I tried to get the Galaxhero ROM installed. I did the following steps:

1) Reboot in recovery mode (Volume down + both Call buttons) and choose "Nandroid backup" to save a backup of your current ROM just in case.
2) Backup G apps
3) Then, choose "Wipe data/factory reset". The phone will reboot in recovery mode again.
4) Choose "Apply sdcard:update.zip" (second menu entry on the recovery screen)
5) Restore Google applications ("Restore G.Apps")
6) "Enable root (su)".

But then enable root failed! Anyway I went on further with reboot system. It rebooted till the "android HD logo" showed up and then suddenly the screen went off and it seemed like my phone went off. So I went back to the recovery mode and did the following steps:
Wipe data
Restore backup
Restore G apps
Enable root SU, but again enable su failed!!

Again I choose reboot system, and when the reboot came again to the "android HD logo". It stuck there and stayed looping.
First, why do I still see the android HD logo again because I did a wipe!
Second, How can I get my phone working again!

View 8 Replies View Related

Motorola Droid :: Failed Flash At Start Error Code 0x7100

Jun 25, 2010

Well i flashed befor and my son was playing with my phone and he let the verison patch come on top of my rooted phone.. well i still have super user but it will not let me do anything stop all of my wifi tether ect. ok well i go to re flash my phone and now it will not let me flash it. It just stops at the start.

The error code i get is (0x7100)

View 5 Replies View Related

General :: Flash Player To Watch Flash Videos On HTC Explorer And Samsung Galaxy Ace

Nov 15, 2012

I need a Flash Player to watch flash videos on HTC Explorer and Samsung Galaxy Ace S5830.Which is the best ? Or should I install a browser ?

View 8 Replies View Related

General :: MTK6572 HTM H10 Resets After Rebooting Constantly?

Jan 28, 2014

i am facing is that when i power on my mobile [Its HTM H10 MTK6572 running stock rom 4.2.2], Boot animation appears and just after that, lockscreen comes for a sec. and then again it reboots and same thing happens! I don't know what is the cause.

By the way, It is not rooted now as it was before. Before this happened, I only updated SuperSU and nothing. The worst thing is that i can't access settings from app drawer and usb debugging got disabled itself (yes, i had it enabled.). Good thing? I can access recovery mode (stock).

EDIT:- My friend told me that your device is soft-bricked.

View 1 Replies View Related

General :: Failed To Update Location - No Signal Error Message

Mar 9, 2013

I keep getting the above message on my phone. I've tried changing settings within the location tab but the msg keeps popping up.

View 1 Replies View Related

General :: MTK6572 - How To Quit Purple Thing Of Screen

Jan 6, 2014

how can i quit that purple thing of my screen, appears after factory reset and wipe data... i do that cuz my baseband was lost and doing that i found it again.. but that purple thing came out..

View 2 Replies View Related

General :: Failed Scanning Partitions Error While Flashing Recovery Through Terminal Emulator

Jun 9, 2013

I am on twrp recovery version 2.1.3 and to upgrade to 2.5.0.0 I used the Google .im app but even after the message showing that recovery was flashed successfully, when I reboot into recovery I still see the 2.1.3 twrp only..So I tried flashing it with terminal emulator but it didn't work.This error shows up every time failed scanning partitions failed with error : - 1

I tried putting the .img file in the root folder as well but it didn't work..I tried naming the root of sd card as storage/emulated/legacy, storage/ emulated / 0, /sdcard, etc but it keeps on giving this error every single time!

View 1 Replies View Related

General :: Galaxy GTI 8150 (Galaxy W) - How To Flash Original Rom Back

Feb 24, 2013

i,m rooting my galaxy GTI 8150 (Galaxy W) and i,m use custom rom cyanogen mod, and i want ask u all...how to flash original rom back to my phone...? i,m try using odin to flash it..but some error say: <ID:0/007> Can't open the serial(COM) port.> they cant flash it...why...? and how to fix it..?

View 4 Replies View Related

General :: How To Enable USB Debugging On Galaxy Mini (GT-S5570) When Phone Is Off

Apr 19, 2014

how to enable usb debugging on galaxy mini (gt-s5570) when phone is off ? Because I went to reinstall the software and I forgot to turn on USB debugging and now I can not even turn on

View 3 Replies View Related

General :: Signature Verification Failed Galaxy S GT 9000?

May 2, 2012

I was trying to get Android 4.04 by Darkknight.

I went into recovery mode, cleared the Cache, wiped the data( Factory Reset). using Volume down+Power+Ok.

Then I tried the update provided by Dark Knight.It shows me an Error message

E:signature verification failed

Samsung Galaxy GT-I9000
Spec.
Firmware: 2.3.3

Build Number : GINGERBREAD.JPJV6

View 4 Replies View Related

General :: Samsung Galaxy - Failed To Restore System?

Aug 9, 2013

My 4n is Samsung Galaxy y duos. Nomaly it has a 240MB System Space. I installed a custom rom (xDuos V3 2) with him guides. its fine. but I tried to get stock rom back. so i wiped all data ,system... n restore my old cmw backup.

But failed to restore. now my 4n has only 220mb space.

it failed due to low system space <as i think>

View 5 Replies View Related

General :: How To Enable Native Video Calling Like International (i9300) On Galaxy S3

Jan 1, 2014

How can i enable native video calling like international (i9300) one on my t-mobile galaxy s3? i can make video call using skype or tango. but i need the built-in feature. so is there any solution?

device: t999
4.1.1 "rooted"

View 1 Replies View Related

General :: Samsung Galaxy S4 Clone - Can't Enable USB Debugging Since Phone Won't Turn On?

Feb 18, 2014

Problem: When pressing the power button to turn phone on, there is no samsung boot logo. the only thing that shows up is a black screen, [the backlight] it will stay that way until the battery dies.

i know it's not a problem with the display because i can get to the recovery screen by pressing the three buttons. i tried numerous wipes and factory resets, even tried to reboot from there. but it still wont boot up, it only ends up with that black screen. Also the green battery shows which further indicates that it's not a display problem.

Phone Description:

Model: GT-I9500
FCC ID: A3LGTi9500
SSN:-i9500GSMH
RATED:3.85V===:13 00mA
MADE IN KOREA BY SAMSUNG
IMEI:355236030
S/N:R21D48HDDA

That's basically all i know about this phone, i know it's a clone because on the hardware differences under the hood compared to the real S4. [it's probably a legend or a superking since it's from korea i think] im not sure which operating system it runs, from the looks of it i dont think it has one.

Some things i've tried: i downloaded android SDK, MTK droid tools, SP FLash tools, for some reason, i keep getting error 8200 in sp flash tools and mtk droid tools doesn't detect my phone. I tried flash updating firmware with adb sideload, it always ends up with an error ''aborted''. i can't enable usb debugging since the phone wont turn on.

View 4 Replies View Related

General :: Galaxy Nexus - Updating To ICS 4.0.4 / Failed With Red Triangle On Android

May 2, 2012

I've had the notification that ICS 4.0.4 is now available for my Galaxy Nexus. I've tried to apply it a couple of times but it fails with the Android on his back with a Red Triangle over him.

The phone is rooted and encrypted. How to apply the change?

View 1 Replies View Related

General :: Samsung Galaxy Note II - Camera Failed When Opened

Feb 26, 2013

I have an Note II , and several days ago it gave message "camera failed" when i open camera. front camera is working. but primary doesn't.

I have tried everything, even changed 4.1.1 to 4.1,2

View 3 Replies View Related

General :: Camera Failed On Samsung Galaxy Y Pro Duos Gt - 5512

Apr 27, 2013

I have Samsung galaxy y pro duos....

when I open the camera >>it shows "camera failed ErrorCallback.onError(1) and the camera not working .... when i call *#34971539# ....Nothing Happened ...I Think I don't have a firmware for the camera ... how can i fix this ???

View 8 Replies View Related

HTC EVO 4G :: Can't Enable Flash While Shooting Cam?

Jun 13, 2010

I don't understand why we can't enable the flash while we are shooting cam? is there an app to enable it? it would really really help. anyone one know?

View 2 Replies View Related

General :: (MT6575) SP Flash Tools Checksum Error

Dec 5, 2013

have an iBall Andi 3n here. Runs on MediaTek MT6575 SoC. Getting this error while flashing stock rom.

View 1 Replies View Related

General :: Darktremor Get Error After Flash Another Custom ROM Update?

Feb 18, 2012

I've been using darktremor and a2sd GUI, but after I flash the phone GUI a2sd get an error.

A2SD exiting the GUI:
A. your device is not rooted
2. Script A2SD Could not be found
3. EXT no partition found

What should I do?

[Solved] must to mount data, system and ext when you flash a2sd, or if you get a2sd error after flashing custom room take a try to flash new a2sd script..

I use CM7 RC5.5 for galaxy Mini - SquadZone Version

View 1 Replies View Related

General :: Error Fastboot Flash Recovery Due To Reboot

Jul 1, 2012

I have an AT&T Atrix 4G and I wanted to imstall CM7.2.

I had the latest Atrix Android version on it. Then I followed the instruction at the cyanogemod wiki for the atrix. So I flashed the sbf (cyanodenmod wiki -> Motorola_Atrix_4G:_Full_Update_Guide).

The rsd lite flashing didn't succeed because the atrix rebooted and the programm couldn't switch into BP passtrougth, or so. At this point the device said something about 0x1000 no bootloader, but I could choose between rsd, fastboot and the other possibilities.

I booted into the fastboot mode and did an oem unlock. Now it says unlocked.

I booted again into the fastboot mode, and now it should be a simple

Code:
fastboot flash recovery recover.img

But:
Windows) it always says:

Code:
sending 'recovery' (4824 KB)... OKAY [ 0.453s]
writing 'recovery'... FAILED (status read failed (Too many links))
after that the device reboots and is in a boot loop

so i tried linux) The first time i tried the command everythings worked fine, but after reboot i chose.

Code:
android recovery mode, but after a while (secs) the device rebooted.

so went to fastboot again, but now the device reboots after the sending command and then it says writing failed because of no device

I don't know if when I am using rsd lite to flash a complete image the phone reboots again and i have a hard brick.

View 2 Replies View Related

General :: Unable To Flash Custom Rom Due To Error (status 0)

Sep 29, 2012

This is the first (and only) time that I have try to root my phone (with the AAHK). After alot of reading I managed to ROOT my Desire HD and it says S-OFF.

The problem is that I am not able to install a costum ROM. I have tried the following roms:
1. Android_Revolution_HD-4G_6.3.3
2. TrickDroid_v2.0.0_C2

And I allways get the same error. It says status 0. I found in some other threads on XDA-devoloppers that the problem is: "Wrong update-binary".

Software information:

Android version: 2.3.3
HTC Sense version: 2.1
Kernel version: 2.6.35.10-gd2564fb
htc-kernel@and18-2#1
Software number: 2.50.405.2

View 1 Replies View Related

General :: Flash Image Recovery Gives Error Scanning Partitions

Nov 1, 2011

Current issue is that I my phone will boot just fine into regular startup however it will no longer boot into recovery mode.

I have tried the below methods but the main problem that I run into is that when I issue flash_image recovery /sdcard/recovery.img(I have tried multiple img files such as the clockworkmod and SPRecovery) however none of them have worked they are receive the below message.

# flash_image recovery /sdcard/recovery.img
flash_image recovery /sdcard/recovery.img
error scanning partitions

What I need at this point is either a way to get some form of recovery loaded either the out of the box version or clockworkmod version working so I can flash my phone and get gingerbread loaded. Or I need to break the OS to the point where the phone will not load past the boot loader.

Phone information:
Droid 2 Global
System Version 2.4.330.A956.Verizon.en.US
Android Version 2.2
Kernel Version 2.6.32.9-g9e2c63d

What I have looked at so far: [URL] .....

View 2 Replies View Related

General :: Spice Mi-350 Phone - Google Maps Error After Rom Flash

Jan 9, 2013

I'm using a Spice Mi-350 phone (It is the same as Lenovo A60). On the stock Google Maps worked perfectly. But recently i flashed Yonip 5.3.7 Rebirth ROM. Since then Google Maps does not work anymore. When ever i open it, it says 'This application requires a working data connection'. I have a fully working data connection and every other app on my phone can access the internet except for Google Maps and it's related apps(like Navigation,Places,Local,etc).

Here is the download link for the Yonip 5.3.7 Rebirth ROM. [URL] .....

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved