I bought an S4 clone, Manufacturer alps Model GT-I9500.
I tried with ALL ROM i found, and with GT-I9500_MT6572_ALPS-JB3(fix) ROM without success Even when i wana format or do memory test i get
Code:
BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)
[EMI] Enable DRAM fail
View 4 Replies
My phone is dead after I flash a wrong preloader my phone model is alps GT-I9500 mtk6572 . I try with ALL ROM on needrom.com with keyworld "alps" "GT-I9500" "mtk6572" ... about 20 ROM but I get Enable DRAM FAILED for each try
Use case :
1- Disconnet the battery and wait 10 seconds
2- Open flash tools with the scatter file
3- Connect the phone usb cable to pc
4- Plug the batterie on the phone
==> MTK USB PORT (COM XX) ok : drivers on the pc seems to be ok
5- On flash tools press download
every time I get BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)
[EMI] Enable DRAM fail
on the web they say the cause is the wrong ROM but I don't know (I try over than 20 ROM)
NEO N003 1/4g T13
I have flashed to newest Stock room from the website neo then i try magerto room he was fine as the beginning then after 2 days he start freezing and sometimes working then the camera is no longer working i tell my self its just poor room
i decide to use the stock room but after i flashed work normal for 10 minute then freeze the screen turn black utile you remove the battery and put back in 2 minutes after many times trying to flash it by sp flash tool i hit format ...my imei is gone and no signal on the sim card ( thats not a big problem)but the phone still freezing and restarting ...black screen ......after that the phone not able to turn on even the logo just black you can see he is trying turn on but no logo no nothing
in the device manager detect MediaTek Usb port before was detect preloader MediaTek somthing ......
look at the picture and the sp tool not working MediaTek Usb port and i got this error
this Morning accidentally i put the phone into Preloader Mode and make normal flash and my phone is a live a was very Happy i went to write the imei must root the phone...i have install root programe name is geno (he is work fine on lenovo P780) but in neo N003 he just freeze and tun off and no longer can trun it on again just black screen.
Now when i plug the phone via usb port windows detect it MediaTek USB Port how i can put it again in Mediatek Preloader VCOM ???Always get error 4032 on sp flash tool (format , upgrade, download) all he same error
I have bought an ALPS iPhone 5 clone from China. It's an excellent clone phone with pretty good specs.
My problem is trying to install the Google Play Store. I have spent hours and hours researching but cannot find the answer anywhere.
Of course I have tried downloading the play store.apk and installing it, which appears to work and installs find but stops when I launch it.
How to install cwm recovery,to flash rom and any available custom roms for this phone...
my phone is a galaxy s3 clone
Model number
GT-I9300
Baseband version
MAUI.11AMD.W12.22.SP.V5,2012/10/23 14:35
Kernel version
3.0.13
root@nebula#1
SMP PREEMPT Mon Jan 21 16:59:34 CST 2013
Build number
APLS.ICS2.MP.V1
Custom build version
004120121
GT-i9300
Android version
4.1.5
Baseband version
MAUI.11AMD.W11.50.SP.V27, 2012/08/04
20:43
Kernel version
2.6.35.7 root@ubuntu#1
Sat Sep29 10:54:30 CST 2012
Build number
ALPS.GB2.MP.V2.17
Custom build version
W988_XYKJ_T14_20120929_ML
I need flash file for this phone .. I accidentally put the wrong preloader not knowing .. That means my phone is dead only means that reading the usb drivers ..
recently bought a Note 3 based in a MTK6572 processor, but the signal doesn't work, I've tried many methods to solve it but no one has worked, I don't know what to do. Obviously this happens cause the IMEI is invalid.
View 1 Replies View Relatedi have s4 clone with this spec
Hardware : MT6572
Model : GT-I9500
Build number : ALPS.JB3.MP.V1.8
Build date UTC : 20130909-111615
Android v : 4.2.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V4, 2013/08/07 10:44
Kernel v : 3.4.5 (lxq@server2) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Mon Sep 9 19:14:10 CST 2013
Uboot build v : -----
LCD Driver IC : 1-otm8012a_fwvga
i cannot be able to lock wcdma, when i check the modem file i got modem_1_2g_n.img
is it hardware limitation or it can be tweak to be able to get 3G?
I got problems with my S3 mini cloneI want to flash a image with swedish language.. this android doesnt have it..GT-I81904.1.2.
View 9 Replies View RelatedI want to use my phone as access card (that my phone recognizes with nfc), is there a way to copy that card and mirror it with my phone? My phone is a galaxy nexus
GT-I9300
I' ve got some S4 clone phones and one of them suddenly after a restart couldn't boot. Neither my PC recognizes it as a device. I changed it the battery with other which were fully charged but nothing. I tried to boot in recovery mode or download mode and nothing. The phone is dead.
View 1 Replies View RelatedHow to ROOT this ****ing phone? xD
Spec:
1 sim card
MT6577
Android: 4.1.1
Build number: JRO03C.N7100ZSALIA
Baseband version: N7100XXALIE
Kernel: Linux version 3.0.31 - 178067 (se.infra@SEP-113) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Wed May 29 14:21:02 CST 2013
I tried Root_with_Restore_by_Bin4ry_v31 but without effect.
Problem: When pressing the power button to turn phone on, there is no samsung boot logo. the only thing that shows up is a black screen, [the backlight] it will stay that way until the battery dies.
i know it's not a problem with the display because i can get to the recovery screen by pressing the three buttons. i tried numerous wipes and factory resets, even tried to reboot from there. but it still wont boot up, it only ends up with that black screen. Also the green battery shows which further indicates that it's not a display problem.
Phone Description:
Model: GT-I9500
FCC ID: A3LGTi9500
SSN:-i9500GSMH
RATED:3.85V===:13 00mA
MADE IN KOREA BY SAMSUNG
IMEI:355236030
S/N:R21D48HDDA
That's basically all i know about this phone, i know it's a clone because on the hardware differences under the hood compared to the real S4. [it's probably a legend or a superking since it's from korea i think] im not sure which operating system it runs, from the looks of it i dont think it has one.
Some things i've tried: i downloaded android SDK, MTK droid tools, SP FLash tools, for some reason, i keep getting error 8200 in sp flash tools and mtk droid tools doesn't detect my phone. I tried flash updating firmware with adb sideload, it always ends up with an error ''aborted''. i can't enable usb debugging since the phone wont turn on.
i just bought a SAM S3 clone.
Phone specs:
Model number
GT-i9300
Android version
4.1.5
Baseband version
MAUI.11AMD.W11.50.SP.V27, 2012/08/04
20:43
Kernel version
2.6.35.7 root@ubuntu#1
Sat Sep29 10:54:30 CST 2012
Build number
ALPS.GB2.MP.V2.17
Custom build version
W988_XYKJ_T14_20120929_ML
How to root this phone? How to flash CWM recovery?
I need a Flash Player to watch flash videos on HTC Explorer and Samsung Galaxy Ace S5830.Which is the best ? Or should I install a browser ?
View 8 Replies View RelatedI recently brought an ALPS i5 (fake iPhone 5) from Malaysia. I mistakenly flashed a Goophone ROM on this device and now I have a blank white screen (back lit) if I try to power on or enter recovery mode. SP Tool does not detect it..there is no system buzz indicating device is connected..nothing...
All my MTK drivers are correctly installed (I tried another MTK device) but it seems like the PC is not detecting my phone.
What do I do?
i am facing is that when i power on my mobile [Its HTM H10 MTK6572 running stock rom 4.2.2], Boot animation appears and just after that, lockscreen comes for a sec. and then again it reboots and same thing happens! I don't know what is the cause.
By the way, It is not rooted now as it was before. Before this happened, I only updated SuperSU and nothing. The worst thing is that i can't access settings from app drawer and usb debugging got disabled itself (yes, i had it enabled.). Good thing? I can access recovery mode (stock).
EDIT:- My friend told me that your device is soft-bricked.
how can i quit that purple thing of my screen, appears after factory reset and wipe data... i do that cuz my baseband was lost and doing that i found it again.. but that purple thing came out..
View 2 Replies View Relatedi,m rooting my galaxy GTI 8150 (Galaxy W) and i,m use custom rom cyanogen mod, and i want ask u all...how to flash original rom back to my phone...? i,m try using odin to flash it..but some error say: <ID:0/007> Can't open the serial(COM) port.> they cant flash it...why...? and how to fix it..?
View 4 Replies View Relatedhave an iBall Andi 3n here. Runs on MediaTek MT6575 SoC. Getting this error while flashing stock rom.
View 1 Replies View RelatedI've been using darktremor and a2sd GUI, but after I flash the phone GUI a2sd get an error.
A2SD exiting the GUI:
A. your device is not rooted
2. Script A2SD Could not be found
3. EXT no partition found
What should I do?
[Solved] must to mount data, system and ext when you flash a2sd, or if you get a2sd error after flashing custom room take a try to flash new a2sd script..
I use CM7 RC5.5 for galaxy Mini - SquadZone Version
I have an AT&T Atrix 4G and I wanted to imstall CM7.2.
I had the latest Atrix Android version on it. Then I followed the instruction at the cyanogemod wiki for the atrix. So I flashed the sbf (cyanodenmod wiki -> Motorola_Atrix_4G:_Full_Update_Guide).
The rsd lite flashing didn't succeed because the atrix rebooted and the programm couldn't switch into BP passtrougth, or so. At this point the device said something about 0x1000 no bootloader, but I could choose between rsd, fastboot and the other possibilities.
I booted into the fastboot mode and did an oem unlock. Now it says unlocked.
I booted again into the fastboot mode, and now it should be a simple
Code:
fastboot flash recovery recover.img
But:
Windows) it always says:
Code:
sending 'recovery' (4824 KB)... OKAY [ 0.453s]
writing 'recovery'... FAILED (status read failed (Too many links))
after that the device reboots and is in a boot loop
so i tried linux) The first time i tried the command everythings worked fine, but after reboot i chose.
Code:
android recovery mode, but after a while (secs) the device rebooted.
so went to fastboot again, but now the device reboots after the sending command and then it says writing failed because of no device
I don't know if when I am using rsd lite to flash a complete image the phone reboots again and i have a hard brick.
This is the first (and only) time that I have try to root my phone (with the AAHK). After alot of reading I managed to ROOT my Desire HD and it says S-OFF.
The problem is that I am not able to install a costum ROM. I have tried the following roms:
1. Android_Revolution_HD-4G_6.3.3
2. TrickDroid_v2.0.0_C2
And I allways get the same error. It says status 0. I found in some other threads on XDA-devoloppers that the problem is: "Wrong update-binary".
Software information:
Android version: 2.3.3
HTC Sense version: 2.1
Kernel version: 2.6.35.10-gd2564fb
htc-kernel@and18-2#1
Software number: 2.50.405.2
Current issue is that I my phone will boot just fine into regular startup however it will no longer boot into recovery mode.
I have tried the below methods but the main problem that I run into is that when I issue flash_image recovery /sdcard/recovery.img(I have tried multiple img files such as the clockworkmod and SPRecovery) however none of them have worked they are receive the below message.
# flash_image recovery /sdcard/recovery.img
flash_image recovery /sdcard/recovery.img
error scanning partitions
What I need at this point is either a way to get some form of recovery loaded either the out of the box version or clockworkmod version working so I can flash my phone and get gingerbread loaded. Or I need to break the OS to the point where the phone will not load past the boot loader.
Phone information:
Droid 2 Global
System Version 2.4.330.A956.Verizon.en.US
Android Version 2.2
Kernel Version 2.6.32.9-g9e2c63d
What I have looked at so far: [URL] .....
I'm using a Spice Mi-350 phone (It is the same as Lenovo A60). On the stock Google Maps worked perfectly. But recently i flashed Yonip 5.3.7 Rebirth ROM. Since then Google Maps does not work anymore. When ever i open it, it says 'This application requires a working data connection'. I have a fully working data connection and every other app on my phone can access the internet except for Google Maps and it's related apps(like Navigation,Places,Local,etc).
Here is the download link for the Yonip 5.3.7 Rebirth ROM. [URL] .....
how to fix this error... i also create a new scatter file of my phone.. but nothing works..
Error is
EBOOT ERROR : (16008)
[Android Partition size changed!
[HINT] Partial images download error
I used insecure boot and root trying to root my phone, which was a huge mistake as i noticed a few minutes later since i cant startup anymore and only get into bootloader.
Now I'm trying to flash my stock rom back.
My CID is VODAP102 and my Version is 3.14.161.27 so i downloaded the rom and tried "fastboot flash boot boot.img" the result is:
sending 'boot' <8192 KB>...
FAILED <data transfer failure <Unknown error>>
finished. total time: 0.158s
What i need to do when i install flash player , i asking for this because when i install flash player i trying to watch movies online, but nothing happens at all , so how i need to activate flash player?
View 1 Replies View RelatedIs there any flash player for galaxy ace?
View 9 Replies View Relatedhow to flash ROM? I want change my stock ROM to CM7
View 6 Replies View Related