I have problem with flash phone, when I try flash it from SPFT v3 and v5 I have error "enable dram failed". Drivers work fine, I have plug my thl w200 without battery, in system appears pre- loader but when I plug cubot without battery system appears only MTK USB VCOM. In Cubot screen is only black, and nothing is appears. Chip is MTK6589T.
View 3 Replies
My phone is dead after I flash a wrong preloader my phone model is alps GT-I9500 mtk6572 . I try with ALL ROM on needrom.com with keyworld "alps" "GT-I9500" "mtk6572" ... about 20 ROM but I get Enable DRAM FAILED for each try
Use case :
1- Disconnet the battery and wait 10 seconds
2- Open flash tools with the scatter file
3- Connect the phone usb cable to pc
4- Plug the batterie on the phone
==> MTK USB PORT (COM XX) ok : drivers on the pc seems to be ok
5- On flash tools press download
every time I get BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)
[EMI] Enable DRAM fail
on the web they say the cause is the wrong ROM but I don't know (I try over than 20 ROM)
How to root Cubot P6 MTK6572W..I tried several methods and some software and I can not make.
View 2 Replies View RelatedI flash my Cubot with CWM recovery and then installed MIUI 3.12.13 (JB 4.2.1) from this thread URL.... Now what I need is to restore the stock rom with the most smooth room that I had read is V0.4.I don't know if I can install stock rom from CWM recovery or I need to get the stock recovery.
View 4 Replies View RelatedMy Cubot GT72 with Android 4.2.2 adds in each SMS the text [From:android]. how to remove it?
View 1 Replies View RelatedI bought Cubot c9w android phone, i install 2 gb SD card on it, i can not install some apps on it for example facebook. after i tried to move apps from phone memory into SD card but impossible, there was not activated move to SD card button.
what have to do how to install or move after that apps to SD card to make phone memory free?
I have rooted my phone and have now the recovery mode from HD blog. It's was working fine. So I tried to get the Galaxhero ROM installed. I did the following steps:
1) Reboot in recovery mode (Volume down + both Call buttons) and choose "Nandroid backup" to save a backup of your current ROM just in case.
2) Backup G apps
3) Then, choose "Wipe data/factory reset". The phone will reboot in recovery mode again.
4) Choose "Apply sdcard:update.zip" (second menu entry on the recovery screen)
5) Restore Google applications ("Restore G.Apps")
6) "Enable root (su)".
But then enable root failed! Anyway I went on further with reboot system. It rebooted till the "android HD logo" showed up and then suddenly the screen went off and it seemed like my phone went off. So I went back to the recovery mode and did the following steps:
Wipe data
Restore backup
Restore G apps
Enable root SU, but again enable su failed!!
Again I choose reboot system, and when the reboot came again to the "android HD logo". It stuck there and stayed looping.
First, why do I still see the android HD logo again because I did a wipe!
Second, How can I get my phone working again!
My HTC One X Plus fell down recently, and has got a ' triangle flag' like mark on the top left part of the screen. (But not on the Gorilla Screen). But each day, when I see it, the black mark getting disappeared , as forming lines in the triangle flag (the original screen getting viewed through the lines).
When I try the phone screenshot option, the complete screen is captured with no black mark on it.
When I contacted the service center, they asked me to replace the screen. That is very costly
Is it really needed to replace the screen or will it get disappeared eventually?
I am running cm7.03 with lordmodue6.7 on my htc inspire 4g. I just went to look at a video on youtube and noticed that their was no visual just audio. I uninstalled it then installed, but no luck. Afterwards i decided to check all other apps that play video like vevo and same problem. I uninstalled adobe flash player then installed it, but ALSO NO LUCK =[. I then checked youtune on my browser and same problem..
View 5 Replies View RelatedI Have a galaxy note 2 n7102 (Clone).I have rooted it 2 days ago.i have the android stock boot animation but when i added a custom boot animation, when i rebooted the screen goes black and then the phone starts up
I tried to put it in system/media and data/local and change boot animation and Samsung in system/bin and reboot but nothing happens.
My Galaxy S4 screen is just completely black. I can turn on my phone and even put in my pattern code on the screen, but it remains black. I have tried to reset it multiple times and I don't really know what to do. Any possible fix without having to get a repair.
View 3 Replies View RelatedI am a Sony Xperia neo V user that recently upgraded to ics stock rom. Just wanna ask how do people enable the crt tv effect like in nexus phones. I am a rooted user.
MT11i using Tapatalk 2 Beta-6
I have an HTC Droid Incredible LTE 4 and for the most part it's fabulous...
But when I'm talking on the phone the screen goes black and if I try to unlock it to schedule something in my calendar, etc., the screen just goes black over and over and won't stay active long enough for me to unlock the screen. This is exceedingly frustrating since I can't use any apps when I'm on the phone, and I have to push the button on the top to get the screen to light up at all if I'm on the phone, it doesn't automatically light up if I take it away from my ear to look at something on my phone.
My Tablet shows black screen after a while animation android logo and no more work. So I tried factory reset. But factory reset doesn't proceed to recover menu. It shows only factory reset logo (Android logo with red triangle) like screenshot.
My tab has only 3 button (power, Volume up and down). I tried both of them. But the logo doesn't move. How to factory reset?
My tab Configuration:
Duocore M7200 7inch, 1.2GHz, 512MB DDR3
Samsung S3 Black-screen on startup?
View 2 Replies View RelatedI'm trying to build CWM for the HP Slate 7 Plus, but both touch and non-touch builds coming from the CWM Builder and manually built builds give a black screen with a few white lines when booted into recovery. The stock recovery.img I provided to the builder is valid because people were able to reflash the same recovery.img via Flashify with no issues, which is the same method used to flash the defunct CWM. I don't have the Slate 7 Plus, so I can't test things myself
The best I can do right now is debloat, deodex, and pre-root ROMs, as well as install more system apps.
! i was trying to install a new custom ROM ( C.A.M.P ) i had Cyanogenmod 10... i came to where i flash the new rom on my computer then when i wanted to fastboot reboot to install zip on phone, my computer shuts off, now when i turn my phone on it lights up black and stays like this and i cant do anything(no CWM no nothing) so i remove battery to turn off....
Phone:Xperia Arc S LTI8i
I was following this guide to upgrade my Sanei n10: [URL] In recovery mode I have installed the rom.zip, but after I pressed the wrong button and it turned off. Now, when I turn it on, leave the writing sanei and after few second remains on black screen.
If I try to entry in recovery mode with the vol+ button, it remains with the Android robot lying down with a red tiangolo, with no options.
What can I do to recover my tablet?
I flashed a rom then i went to flash gapps the bar was loading then it went off the screen and it didn't do anything.i waited about 5 mins and still nothing.i hit the power button and it shut off i go to turn it on and all there is a blue light where notifications show.black screen nothing else...
View 5 Replies View RelatedI have an issue with the chrome browser starting with a completely black screen. At first I thought it was only my last phone (RAZR HD), but the problem is also present on my Verizon Note 3. If it were just an issue on a single phone, I'd probably ask in specific phone forums, but it's happened on two different phones now.
I'm presuming that the problem might be caused by an app I'm using, but the problem is intermittent so I can't tell if the issue subsides when I uninstall certain apps.
I am trying to open fastboot screen in my arnova 7g3 tablet i pressed reset button and also pressed power button simultaneously but its showing black screen what should i do my tablet is rooted by superuser
View 1 Replies View RelatedI have an ICS phone, the problem is on the lock screen I can't pull the status bar down in any type of lock screen (slide, pattern, PIN, etc). My question is how do I enable status bar dragging on lock screen? I know how to compile or decompile APK files, but I dont know what should I change to enable this.
View 1 Replies View RelatedBasically, I want the three dots that appear on the apps to appear even without the navigation bar enabled. How I can do that?
View 6 Replies View Related1) How can I make my phone not turning on the screen when it is locked and i get an sms (via the built it messages app), but light the led light with a custom color (and of course, play a tone). I've tried "LightFlow" but it didn't work, the screen has still gone on when I got an sms.Mention that with 3rd party apps (e.g. whatsapp and wunderlist) the thing works great, the screen is black, the led is on, and the air molecules near the speaker start oscillating harmonically.
2) I know that even without any sdk manipulation, my phone still lets me move some downloaded apps to the sd. I had downloaded a 1.5 GB game and kept in mind that I use 3.5 GB of my internal storage. Luckily enough, this game is movable. I moved it to the sd card, and after the process had been done, I checked how much storage I use on my internal storage - 3.5 GB.The button changed to "Move to device storage" but it seemed that the game had not transfered at all.Mention that I tried the "adb shell pm setinstalllocation 2" thing, and it didn't fix it, so I reversed the process with the "adb shell pm setinstalllocation 0" command.
I try to install new rom (fixed rom) on thl t11.
After i go in recovery mode i go in button "wipe all data" and after " yes - wipe data for all users"
Now when i turn on my mobile (power button) i get only black screen,nothing alse.
My phone is not rooted,now i can't acces to recovery mode.
Anytime i am done using my phone it stays on unless i black it out by hitting the power button. shouldn't it do this automatically? If i get a text in the middle of the night it stays lit up killing my battery, how do i stop this?
View 1 Replies View RelatedI dropped my phone for the first time ever today, and there are cracks under the screen, and no picture whatsoever. Sounds and buttons still work, and I can turn the phone on and off, but the display remains utterly blank. I've pretty much written the phone off, there's probably nothing I can do for it. However, I would love to recover my pictures, contacts, and music from the phone. Is there any way I can do this without being able to see the phone display?
View 1 Replies View RelatedI recently bought Minecraft, downloaded Angry Birds Go and Injustice Gods Among Us on My Xperia E!
All the above when I start them they only show black screen with sound, I can click on things but no picture.
When Running Injustice Phone says, app is not responding , Wait or Close!
Injustce comes up with loading screen and the superman screen but after that it is a black screen!
I have tried rebooting, reinstalling, clearing all sorts and my phone is upto date!
I am also Running V6 Supercharger wich is awsome and makes my phone lag free!
Just once Minecraft started to work, when I deleted both folders in games > minecraft (On the SD Card).
So I was trying out the CM7 for xperia arc by the freexperia team. It was epic. so i also tried the CM9 release by them..
-> I downloaded the CM9 anzu for my arc S
-> Extracted the files
-> Used fastboot to flash boot.img
-> And then: fastboot reboot
Instead of the FreeXperia splash screen welcoming me.. i was given a black screen.. The phone does turn on.. but then there is nothing. No splash screens. nothing.
Is there anyway to boot straight into CWM?? recovery?? Did i brick my phone for good?
I'm trying to make my own boot animation (A simple android kitkat logo), but when I put it in /system/media/bootanimation.zip and reboot the phone, it goes to black screen.
I followed the steps described in that guide and read that post, but they didn't share the solution and the mediafire link is dead. I'm attaching my current bootanimation.zip