I flashed a rom then i went to flash gapps the bar was loading then it went off the screen and it didn't do anything.i waited about 5 mins and still nothing.i hit the power button and it shut off i go to turn it on and all there is a blue light where notifications show.black screen nothing else...
View 5 Replies
I dropped my phone for the first time ever today, and there are cracks under the screen, and no picture whatsoever. Sounds and buttons still work, and I can turn the phone on and off, but the display remains utterly blank. I've pretty much written the phone off, there's probably nothing I can do for it. However, I would love to recover my pictures, contacts, and music from the phone. Is there any way I can do this without being able to see the phone display?
View 1 Replies View RelatedToday when I'm was coming out of gym my phone just fell to the floor. The battery disassembled but it seemed not a big problem.
When I tried to switch it on, the screen became black, but i noticed that the screen turns on because it is not complete black, i noticed a bit of light change. And the most amazing is that I can ear the sound of the music of boot, and the tactile buttons are also with light.
Maybe I can't solve it at home because i would need to dissasemble it but I look for my guarantee and that's in time, the problem is that the phone is rooted, and with rom enhance 236, and this broke my guarantee, can install stock rom just using usb cable?
Lately my phone has made it a habit of showing a black screen when I open an app. At first it was just one app that I could not open, and now most apps have this problem. It is very difficult as even my contacts and messages aren't showing. Also sometimes it starts buzzing with no reason.
I have tried to re install some of the apps, however this did not work.
My phone is a Samsung Galaxy Ace GT-S7500.
I have an issue since i start installing custom ROMS. So, is not my first time installing a ROM. I have installed stock ROM's in the past. However, not custom ones. I have rooted my device in the past and even now before installing a custom ROM. I have installed through TWRP recovery various custom ROMS such as Omega, AOSP, ARROW, WanamLite, Google Edition and CyanogenMod but none of them worked fine for me.
In some ROMS I might not have reception (don't worry the IMEI is the same and backed up). However, in EVERY ROM my dialler crashes; for example, when im trying to make a call it freezes and the screen goes black without seeing anything. On the other hand, when I receive a call, screen takes ages to appear and show the caller or even accept the call. In addition, I have NO SOUND at all in every ROM as well.
I believe that the kernel might be the problem. This is because when i am booting the phone I always see the following:
I have tried clearing cache, dalvik, removing battery, installing stock ROMS etc.... and nothing changed!
i was listening to music on my samsung galaxy sII and then it stopped and turned black , i removed the battery and placed it again , after that it was stuck in the samsug boot logo where it started to show samsung multiple times , i did the same thing remove and place the battery and after that it just turned black and doesn`t turn on again or even charge.
View 1 Replies View RelatedI recently rooted my Sprint Galaxy S3 (4.12) but decided unroot it yesterday using Odin 3.07. I flashed a stock rom from Team Epic, but ended up with a black screen with a blue led when I tried to turn it on. I have access to both download mode and stock recovery mode (no CWM or TWRP).
View 1 Replies View RelatedI have HDC Galaxy S4 exynos. I have a problem, when I call out the screen goes black, and I charge my battery full, but it very fast discharge or when I restart my phone, it show my battery percentage 10-20%.
View 7 Replies View RelatedMy aunt gave me a Samsung Galaxy S2 and everything was fine, except that it didn't let me register to the network. The next day it told me that it had to do an update so I did the update. After the update the home screen turned black and pressing the buttons didn't do anything. After a while an error pops up saying "application is not responding" and then the screen just stays black. The top bar works just fine and I can even go on the internet, play games, practically do everything. I did a factory reset by pressing Volume up + Home + Power 3 times already, but the only thing that changed is that the language turned into German.. the screen stays black. It had nothing to do with Rooting or Flashing, because I don't even know what that is.
View 2 Replies View RelatedI dropped my Note 2 yesterday and the screen started slowly turning blue. This morning, the screen completely got filled with blue/white/messed up color, and then went completely black. Touchscreen still worked though because I was able to maneuver around the phone right after it was dropped. Screen was not cracked. does the screen has to be replaced as well or i can replace it with smaller parts?
View 2 Replies View RelatedMy Samsung Galaxy Reverb has nobody willing to build CM10 for it, so I decided to take on the task. It built without error - processed the kernel and all the CyanogenMod 10 files just fine and generated the .zip. However, after flashing the .zip I end up with a Samsung logo, then a black screen.
The compile went through without error, so I'm a little lost as to what I should check next. From doing a little searching it seems the kernel is at fault, but what to do about that. Am I supposed to flash the kernel separate from the .zip that the CM builder outputs?
I'm trying to set up a tasker profile that will save some time (and my phones hardware...).
In a nutshell: When using a particular app, I would like the screen to turn off after a short period of time, but (and here's the bit I can't figure out) allow it to be unlocked just by touching the screen (i.e. no hardware button presses required). Is this possible with Tasker?
I was in the pool when I dropped my phone in it. It was only submerged for about 2 seconds. I was at a friends and they didn't have white rice so i had to put it in brown rice-- all day. Then today I put the battery in it and it acting the same, everything works but when I touch the screen it doesn't do anything. It has now been in a air tight sealed bag full of white rice for about 3 hours... It still doesn't work.. I have college tomorrow and I need my phone...
View 3 Replies View RelatedMy galaxy s2's screen has occasionally stopped responding, the os was still running and everything so it wasnt frozen, my touch screen just simply stopped working. Only way to fix it was to hit the back of the phone and do a battery reset. This issue started poping up more and more, and now it won't respond.
Model: GT-I9100M
No custom roms/kernels have ever been installed, has always run off the stock. Never been dropped or had water on it (I took very good care of it).
The nav bar at the bottom (back/search/options/menue) and hardware buttons all work. Everything above the screen no longer works.
What iv done: I've reset the phone, did a bettery pull for the night, fully charged it, looked at the board and checked all the connections (all good). Would flashing a custom rom/kernel be something to try next? Why would the bottom nav bar work but no the rest of the screen? Could it be locked somehow? If it is.. how would I unlock it?
I have noticed that after the last update, my touch screen doesn't work for a few seconds on random occasions and then works again after about 3 or 4 seconds. when I'm reading a book and they're about to reveal the mystery or enthusiastically playing a game and it stops working, I get increasingly frustrated that I can't turn the page or that I lost the game because during the last few seconds my touchscreen decided to temporarily stop working.. I just want to make sure there's not something wrong internally.
View 6 Replies View RelatedI have a Galaxy S (GT-I9000M) which doesn't boot past the start-up splash screen and sound effect. Eventually it will just switch to a black/blank screen and do nothing more. The back and menu buttons still light up if tapped.
The history how I got it this way, was I was using the app web-sharing lite to transfer some files through wifi without the need of a usb cable. I was transferring a large movie file when the phone locked up. I reset the phone, and upon boot every app and service was crashing. Tried this a few times, then pulled the battery etc, still the same. Then I booted into recovery mode(vol up+home+pwr), and applied wipe data/factory reset, then rebooted. This is when it started to only boot into the black screen.
This is a Canadian phone, service/bought through bell, the phone had the one click root applied to it so TI Backup could run on the device. So I think I'm out of luck with any warranty service.
I can get into the phones recovery mode and download mode, so I think there is still hope for this phone to be recovered. What I don't know is what firmware version Bell ships with these devices, and where I can download it?
I installed ADW.Launcher today on my Galaxy S, and have ended up with a black screen. I'd like to fix it without a factory reset, if possible.Galaxy S, Android 2.1, bought in Singapore, SingTel settings but bought it unlocked. Currently in Indonesia. (Can't look up Baseband Version, Kernel Version and Build Number on the phone now for obvious reasons.)A short while after installing ADW.Launcher, the Home button became unresponsive, and a minute or two later the phone restarted itself (the way it's done by itself a handful of times since I bought the phone - without going through the whole power down and power up sequences of sounds and graphics). Then I only had a black screen with date and time at the bottom, and the menu and back buttons lit up, and now I can't get the display back. It seems to start normally, with the logos and sounds, but just returns to that black screen with date and time.
I know something's going on inside because I can swipe to unlock the screen (giving me a purely black screen). If I then press and hold Home, I get the haptic vibration that normally goes with the "recently used" menu. But if I randomly tap all over the black screen, and try to use the menu and back buttons (guessing where the menu items are) I get no response, and no haptic vibration.Holding down the power button gives me the usual power menu - I can select "Power off," but it restarts. I've removed the battery a couple of times, waited and replaced it - but no change.
At first I thought it was related to my SIM card, as it did the self-restart thing yesterday about 20 min after I got a new SIM card. But doing a google search suggests that this problem is sometimes related to launchers. And I removed the SIM card and restarted (removing battery) and it didn't help.The closest I could find to an answer to this problem was in the Droid X forum: HELP! I uninstalled launcher pro, and now have a black screen! - The solution there was to do a factory reset. I'd really rather not do that, but may not have a choice.
I just plugged into Kies and performed a Firmware update, which I assume was the Froyo update. It all ran it's course perfectly and the phone then went to reboot. Following this, it hung on the Galaxy S animated screen before simply going to a black screen (I know the phone is still on, because the two bottom corner buttons will light up if pressed).
I realise that this black screen is quite common, and that people suggest booting into recovery mode. The problem is, I've never been able to get my phone into recovery mode. I turn the phone on and hold down Power + Home + Voume Up for a couple of seconds and then let go... it does nothing, it just goes onto the Vodafone screen and then carries on booting.
I also tried holding down these buttons for a little longer, but all that it does is pushes the phone into a constant restart loop (as obviously I'm holding down the power button).
I am using GAOSP B2 and when I make try to make a call it dials out but the screen goes black and the only way to get out is to remove the battery. Strange the first call I made with this ROM was fine. Anyone else have this issue?
View 2 Replies View Relatedfirst of all let me just say that beta2 is superb i just have one problem with it whenever i'm in a call (reciving or dialing) the screen goes blank and i cant wake up the phone not the end call button and not the open (side) button the only ways i can wake it up is by getting another call or rebooting
any way to work around it? i have tryed several screen on pogs from the market but no luck there without it i would use it everyday, its much much better then galaxo.
My galaxy s3 screen has broken. It didn't shatter but it does not light up or respond to touch. I know it is on because the light in the upper corner that blinks for notifications works and the soft keys light up when the power/lock button and volume button are pushed. I can not see or save what I have on my phone through Kies because I cannot unlock it. Is there was any other way to unlock a phone like through a website or program without using the touchscreen?
View 3 Replies View RelatedJust a quick question about the Captivate. I just got myself an HTC Aria and I love how easy it is to use the touch screen on it. Its extremely responsive. Now my sister has the SamSung Instinct on Sprint and the touch screen is horrible compared to HTCs touch on the Aria. Im thinking about taking the HTC back to AT&T and getting the Samsung Captivate. I am just worried about the touch screen on it and if it will be like the Instincts? If the touch is as good as HTCs Ill get it. If its not, then Ill stick with the Aria because despite its size, its an extremely fun and responsive phone. Any thoughts?
View 10 Replies View RelatedMy HTC One X Plus fell down recently, and has got a ' triangle flag' like mark on the top left part of the screen. (But not on the Gorilla Screen). But each day, when I see it, the black mark getting disappeared , as forming lines in the triangle flag (the original screen getting viewed through the lines).
When I try the phone screenshot option, the complete screen is captured with no black mark on it.
When I contacted the service center, they asked me to replace the screen. That is very costly
Is it really needed to replace the screen or will it get disappeared eventually?
I am running cm7.03 with lordmodue6.7 on my htc inspire 4g. I just went to look at a video on youtube and noticed that their was no visual just audio. I uninstalled it then installed, but no luck. Afterwards i decided to check all other apps that play video like vevo and same problem. I uninstalled adobe flash player then installed it, but ALSO NO LUCK =[. I then checked youtune on my browser and same problem..
View 5 Replies View RelatedI Have a galaxy note 2 n7102 (Clone).I have rooted it 2 days ago.i have the android stock boot animation but when i added a custom boot animation, when i rebooted the screen goes black and then the phone starts up
I tried to put it in system/media and data/local and change boot animation and Samsung in system/bin and reboot but nothing happens.
My Galaxy S4 screen is just completely black. I can turn on my phone and even put in my pattern code on the screen, but it remains black. I have tried to reset it multiple times and I don't really know what to do. Any possible fix without having to get a repair.
View 3 Replies View RelatedI have an HTC Droid Incredible LTE 4 and for the most part it's fabulous...
But when I'm talking on the phone the screen goes black and if I try to unlock it to schedule something in my calendar, etc., the screen just goes black over and over and won't stay active long enough for me to unlock the screen. This is exceedingly frustrating since I can't use any apps when I'm on the phone, and I have to push the button on the top to get the screen to light up at all if I'm on the phone, it doesn't automatically light up if I take it away from my ear to look at something on my phone.
My Tablet shows black screen after a while animation android logo and no more work. So I tried factory reset. But factory reset doesn't proceed to recover menu. It shows only factory reset logo (Android logo with red triangle) like screenshot.
My tab has only 3 button (power, Volume up and down). I tried both of them. But the logo doesn't move. How to factory reset?
My tab Configuration:
Duocore M7200 7inch, 1.2GHz, 512MB DDR3
Samsung S3 Black-screen on startup?
View 2 Replies View RelatedI'm trying to build CWM for the HP Slate 7 Plus, but both touch and non-touch builds coming from the CWM Builder and manually built builds give a black screen with a few white lines when booted into recovery. The stock recovery.img I provided to the builder is valid because people were able to reflash the same recovery.img via Flashify with no issues, which is the same method used to flash the defunct CWM. I don't have the Slate 7 Plus, so I can't test things myself
The best I can do right now is debloat, deodex, and pre-root ROMs, as well as install more system apps.