General :: Adding GPS USB Driver To Eken T01?
Apr 5, 2012
I've just got a Eken T01 Tablet bit of a bargain to be honest :) Anyway.....
I would like to add a usb gps driver to it. Now from what I understand I need a few things.
1. USB Host
2. USB Linux Drivers
3. Root
I have all three and the driver is a PL-2303 USB to Serial Driver. From what I can gather I need to put these c.
files into a specific folder on my tablet and then edit a couple of files to load these drivers on startup ?
Am I going down the right root ? or completely off the mark ?
I've tried to do alot of reading but not getting far really because most tablets either have built in gps or they dont normally have a host usb port.
Linux Kernel 2.4.31 and above already includes built-in drivers for PL-2303H, PL-2303XA/HXA and PL-2303HXD.
NOTE: Google Android OS is also based on Linux kernel so it also supports PL2303.
does that mean it already has a driver installed and I'm just missing something ? How would I check ?
View 4 Replies
Apr 19, 2012
Is CWM available for the Eken T01? I have posted this question several times on other boards and never got an answer either way. I just got this tablet and I have rooted it. However I would really like to make backups with CWM like I do with my phone because it has saved my butt more than once
View 9 Replies
View Related
Nov 15, 2012
I've question about FW Eken T01A. It's possible to put FW from tablet W70 on Eken T01A? I ask because yesterday I saw vid on youtube (this one [URL].... ). It's look faster than default FW T01A.
Or another, how I can get this win8 laucher? She said on this vid it's apex but I search win8 theme and nothing like this...
View 1 Replies
View Related
Aug 10, 2013
I have had an EKEN T02 tablet for one year now. For almost one month every time I switch it on there is a straight line running through my screen.
Sometimes it is green and thinner and sometimes it is grey and thick. As my screen keeps working it gradually fades away but it never disappears.
View 1 Replies
View Related
Mar 25, 2013
So my pixcom tablet went bootloop and i flashed it ,it all went well until the flashing process, the progress bar show 15% and went 0% percent again. have tried all technique posted in the web but won't work. have tried all the Livesuite ver. (1.5-1.7). fail.what should i do?
View 1 Replies
View Related
Aug 14, 2012
My brother has an eken T02a tablet and recently i installed root explorer on it and my brother was playing with it and deleted /system and now it is not booting crying: there is a bootsplash screen but no boot loader and i dont know how to access recovery on this tablet.
View 6 Replies
View Related
May 27, 2010
In case anyone else is having problems getting their Incredible to connect, the easiest way I found to install the USB drivers are with the HTC sync program here:
http://member.america.htc.com/download/Driver/DROID_INCREDIBLE_Verizon/HTC_Sync_2.0.33.exe
The google SDK driver doesn't yet work with the Incredible, and though it can be hacked - this download might be easier for some.
View 3 Replies
View Related
Jan 6, 2013
I think that is for a malfunction of GPS fault driver. I wanted existing driver that is from Custom Rom / system / app / YGPS.apk replaced by the factory driver.
I have a Nandroid backup of the factory ROM (file: boot.img, cache.img, data.img, system.img and nandroid.md5).
But I do not know where this factory driver is located. How removed from Nandroid backup and put in a cell phone.
View 4 Replies
View Related
Nov 5, 2013
Picked up a Maxwest Orbit Z50, overall it is a solid off brand phone, but I have hit a wall trying to find USB drivers for it. The VID is 24E3 and PID is 9025. The phone has a Qualcomm Snapdragon MSM8625Q Processor. Trying to get the drivers to see if any of the root methods out there will work.
View 2 Replies
View Related
May 17, 2012
i wanted to start android development on a real, but not too expensive device. URL....The manufactorer is CUBE:URL>....It works fine and i wanted to connect it to my PC, running windows 7.The problem is: I could not find any usb driver on the (chinese) manufactorer site.
In the device manager the device was listed as "K8GT_W" and marked with "no driver installed".if there is a driver for this device or how to use some "generic" usb device driver with this device?
I downloaded the google USB driver with the android SDK manager.The i selected "update driver" from the device maanger + selected the google usb driver download directory.This shows the message "K8GT_W could not be installed".
View 3 Replies
View Related
May 14, 2012
I am porting the Sony Tablet S ROM (Honeycomb) to my Toshiba Thrive. I got most things working but I cannot get the damn wifi working. Logcat says "Unable to load wifi driver". Kernel is 2.6.36.3.
Typically this is a kernel / wifi module issue but I am using the same kernel/module that I use with all other ROMs I make and it works fine. I've copied over all wifi libs, wpa configs, etc but I'm at a loss. This is the biggy that is keeping me from releasing this ROM.
View 2 Replies
View Related
Apr 18, 2014
I have the following problem with an android tablet (ainol captain).For the moment I am using a stock firmware (fw A) where almost everything works good except for the battery.On another newer stock firmware (fw B) almost everything works good except for the sound when the headset is plugged in.
I tried installing Pimpmyrom in which you can install an 'enchancing' sound driver but it didnt work. The sound did get a bit better. I also tried viper4androidFX with the same 'a bit better' result. I dont think this is a hardware problem since sound works fine one fw A.Is it possible to backup the sound driver and/or settings from fw A and install these on fw B?
View 1 Replies
View Related
Apr 24, 2014
As you know usb drivers are required by every activities. But Videocon A15 & some other mobiles have not official drivers. So how can I install usb driver for those mobiles?
View 2 Replies
View Related
Jul 14, 2013
How to add Ericsson driver into android 4.0???
Here is the iso : [URL] ......
And here are drivers: [URL] ......
View 1 Replies
View Related
Jan 9, 2013
i just wanted to know how to update the drivers of my android device i want to update the drivers of my mali 400 gpu how to do it
View 3 Replies
View Related
Mar 6, 2014
Videocon A15 little RAM makes trouble for me. So I want to root my phone to use it in a better way, but I have tired by finding usb driver for videocon a15. But I can't find any usb driver. So I want to know how do I install usb driver for this handset?
View 9 Replies
View Related
May 12, 2013
I recently bought my new phone Xolo Q800, and it's also my first Android device.
One thing - no driver to connect my phone in USB debugging mode when I have to run my Android apps on my phone from Eclipse
I even sent an email to Xolo support, but haven't gotten any reply yet. I remember many Q800 users here talking about the phone here when it was launched.
View 4 Replies
View Related
Mar 25, 2013
I have a BLU Quattro 4.5 android device and when I try to connect via USB Debug mode and run ADB Device it will not find my phone. I have searched high and low in order to locate the driver with no luck. The generic USB driver from google won't even work. I have even run emulator from the phone and when I type: pm set-install-location 2, it comes back with Killed and then back to command prompt. When I type: pm get-install-location it comes back as 0[auto]. My phones main memory is 1 gb and 1.5 internal usb memory. With all of the main system apps updated on the main drive, the phone cannot handle ANY other apps, even when I put apps on the usb memory it is very sluggish. I am trying to install and run all of the apps from the external sd card and just have the system apps running on the main disk. I would also like finding the driver needed to access the phone in ADB.
BLU Quattro 4.5"
4 GB Internal Memory( Broken up to 1 GB Main, 1.5 GB USB Storage, and not sure where the other .5 GB went.)
1 GB Ram
NVIDIA Tegra 1.5 GHZ Quad Core
16 GB Class 10 Micro SD Card
Android 4.0.4 ICS
Unlocked Running Straight Talk/T-Mobile Sim
View 9 Replies
View Related
May 16, 2014
Somehow I managed to get my PC to only recognize ROMaster ADB drivers only; but it doesn't work properly with ADB commands on my computer. I would like to revert it back to only detecting "normal" adb devices.
I believe I had install ROMaster Setup previously for data recovery purposes but have it uninstalled since.
I have tried to reinstall ROMaster Setup and uninstall it. Run Ccleaner and clean up the registry, uninstall and reinstall Google SDK (USB Drivers).
I have tried to manually select driver to install but only two ROMaster selection appears.
Using Windows XP.
View 3 Replies
View Related
Jan 19, 2012
How do you upgrade the OS and flash driver on the LG Phoenix its been rooted and unlocked.
View 1 Replies
View Related
Jan 3, 2013
I have a tablet and its a clone of momo9-3s .The original firmware i have do a backup, and i have installed a firmware from a momo 9 site. Now the tablet go good, but I dont Have the sensors of accelerometer and the pshical button dont are right ( example: volume + for tablet is back button ) .Now, I can solve ??For example exist one file of original firmware that I copy on the actual firmware?
View 1 Replies
View Related
Apr 4, 2013
Micromax does not provide any drivers for its phone - Micromax ninja a89. We are trying to use the phone for development and are unable to install device driver in windows 8.
We tried the adb drivers at - [URL] and got the error - Windows found driver software for your device but encountered an error when trying to install it. Android ADB INterface- The system cannot find the file specified.
We even tried this link - [URL] But that does not solve the problem. How do we install adb driver for micromax a89? Is there any other workaround to use the phone as a development device?
View 2 Replies
View Related
Dec 27, 2013
How we can have on driver zombies the tegra 4 graphics on our prossecor like Dead trigger 2 hack?
View 2 Replies
View Related
Apr 6, 2014
I Have a Nexus 7 and recently I found that I needed to use ADB for something and I had used my Nexus 7 with ADB on this computer before (thats how I installed KitKat) but whenever I connect my Nexus now it says that is not configured correctly and when I attempted to install the ADB driver it said windows encountered an error. I am currently running windows with Driver verification disabled and on test mode. I am also running windows in test mode so that it wouldn't block the driver. I have tried every driver possible from the one in the SDK to the intel android adb driver and even PDAnet. I have checked inside the driver file that it is properly registered for my nexus 7. I am running Windows 8.1 on my computer and android 4.4.2 kitkat on my Nexus 7.
View 1 Replies
View Related
Sep 19, 2013
it's almost 2-3 hours that i'm stuck with instaling drivers on pc for my Prestigio Multipad PMP5097CPRO. I wanna root it, but I need first to install drivers propery to debug via USB.
Root with "ICS Root Unlocker"
I used that guide sendspace.com/file/4dwex1
tried with different versions of Rockusb, but still the same. (unable to install drivers) .I even tried different usb cable/port/ and pc, but no work (win7 64bit)
ADB driver don't work too. I've read this thread but find nothing similar http:/[url]....
View 1 Replies
View Related
Jan 3, 2014
Now I'm using ICS 4.0.4. Flashed by walton customer service.but i can't flash cwm. pc is not getting my device. i think it's driver problem. i tried many ways, but no progress. windows 7 64 bit.
View 2 Replies
View Related
Jun 16, 2013
I have a Fujitsu M532 tablet What driver am I required to make use of ADB debugging?
View 3 Replies
View Related
Sep 10, 2013
I want to connect my CS-918 Android TV Box to my Pc.I have Win 7 64Bit. I download the Rockusb_v3.5 drivers, in the device i set the USB Debug mode, When i connect the USB cable, In the Windows Device Maneger it recognize as CS918. I tried another cable and the same....Then i click 'Update Driver' select the path of the 'Rockusb' but it does not installing it.
View 3 Replies
View Related
Feb 25, 2013
I've two identic tablet.In one of this the wifi connection don't work properly, so I decide to install custom rom, but don't work the touch.
I find the original rom, and I reinstall it. But now the g-sensor don't work.So I've found another rom, in wich the wifi don't work, and the g-sensor yes.
My question is: is there a way to change or wirte a file to work properly wifi and g-sensor?
What I've to change? Wich file drive the g-sensor or the wifi in android?
The two rom has rooted, so I can fully access to all files!
View 1 Replies
View Related
May 29, 2012
Where I can get the device driver for the Ampe A10 10.1" tablet.
Windows 7 x64 detects a device called "Android" when you connect the tablet and says no driver found.
The tablet does not appear on the device chooser in the eclipse development environment.
View 2 Replies
View Related
