In the update phase 2 after I press the back button and connect the usb cable it lights green and i waited for more than 20 sec to boot in flash mode but it doesn't happen and the phone turned back on automatically.
View 4 Replies
Is there any way to start my Droid Phone in "clean" mode? I just discovered that one recording app was killing my outbound phone, and I have some other wierdnesses with zoom happening. Before I go round and round with Verizon, I would like to start my phone without all the add-ons running. But I do not want to uninstall and reinstall everything, just to see/prove that the new apps are not causing my zoom problem.
View 1 Replies View RelatedOnee the " official" fryo comes out will I have to flash to stock then update or can I just apply the update to my rooted phone?
View 6 Replies View RelatedMy Hero won't start after applying the second upgrade, the 3.32 (the one containing android 2.1) the first one installed fine. The phone downloaded the update via WiFi and when I choose to install it, the phone rebooted and I saw the progress bar finishing, but afterwards I got an exclamation mark in a triangle, and the phone locked up. I then had to remove the battery to turn off the phone and apply the 2.73.405.6 ROM from HTC.com via fastboot usb.
The phone is fully charged, not rootet, and ive tried downgrading and upgrading it 3 times with the same result. I even called the HTC Hotline and got a hold in a nice female supporter whom was cleary not choosen for her technical skills, she didn't even know how to restore the phone via fastboot. She was also unable to answer why they didn't have a ROM (exe) installer for the 3.32 upgrade.
After a flash update the phone does not restart..When I try to flash it, I have a error "BROM ERROR: S_DL_GET_DRAM_SETTING_FAIL (5054) [EMI] Obtain DRAM Failed!"
However I think that my phone is not a true Goophone, Before the fatal flash, I have test and make a backup with MTKDroidTools and It was stated that the processor was a MTK6589, but it was a fake and it was actually a MTK6572
I have the same problem when I use my original Backup.when I plug my phone on the computer, the device manager said "MediaTek USB Port(COM7)".
Got the update notification today in PC companion but when I try to update I get the error "unable to install or start phone software update components". I waited too long for this update.
View 8 Replies View RelatedI got the Galaxy from my mother (she switched to another phone), but she lost the USBcable. I found a way of sending files via WiFi to the sdcard, and also connected adb via WiFi, but I can't flash the new recovery because I'd have no WiFi connection in fastboot. Is there a way to flash an official update from the sdcard using stock recovery? I successfully entered recovery but there are no options, and I can't find a guide of any kind. I tried buying the cable, but none of the shops had the official one, so finally I bought a third party cable that only charges the phone through usb, but windows gives me some error and doesn't recognize it as a device.
View 16 Replies View RelatedWhere the hell is the Flash Player update? I'm tired of waiting for the stupid update. I'm not rooted and I'm on 2.2! When is Flash Player coming
View 2 Replies View RelatedI've recently been getting into more security cautious habits with encryption and what not, due to this whole NSA/Big-brother is watching business... But I have a question (more may pop up as this discussion goes on).I am still getting a hang of all this encryption business. If I go ahead and do a full phone encryption with my GN2 where will I stand as far as backups to Dropbox/Copy/Google Drive/etc.?
I currently have photos and such backing up to copy, and I often move backups made through recovery to Dropbox and such. If I were to have photos automatically sync to copy or move system backups to dropbox wouldn't that render them basically useless as I am assuming they move out of the phone encrypted (not being decrypted as they exit).
The photos would be unusable anywhere besides my phone right? So moving them off my phone to share vacation photos for instance would be impossible, and if my phone were to crash they'd be irretrievable? Making the backup process pointless.
Wouldn't the back up be rendered useless as well, exactly when I might need said backup? If my phone were to ever crash or die for some reason, I would lose the encryption key, would even be able to do a full system restore through the recovery? It would seem that the encryption key wouldn't be kept with those back up files, so while it might place everything back in its correct place, it would still be unreadable. Or does it maybe keep the key in system files somewhere so that a full backup would restore the key as well?
I am also under the impression that I would not be able to flash through custom recovery either as the internal SD would be inaccessible from the recovery being it doesn't have the encryption key. I am currently running OmniROM and it is in a nightly stage still for my phone. I wouldn't be able to update nightly would I? I am assuming since it basically flashes/overwrites system each time, that I would be losing my encryption key and making everything besides system unusable then right?
And what about downloading ROMs to flash/update directly to my phone? As I download them from in browser or another app and they go to the default /downloads folder they would be encrypted. They wouldn't be accessible from there in recovery, but if I were to try and move them out of internal SD to the external SD they would retain encryption and still be inaccessible? So the only way to download ROMs and updates would be from PC and only move them to the external SD?
Wonder if X10 can include auto flash after the new update on Q4.
View 3 Replies View RelatedI tried to start the camera flash for an app I'm doing but I don't understand why it isn't working.
here is the code:
Code:
import android.app.Activity;
import android.hardware.Camera;
import android.hardware.Camera.Parameters;
[Code].....
For information I'm using a LG Optimus 3D for the test of this app.
I was quite excited to have flash on my mobile devise and as I have an unlimited subscription to Lovefilm I was looking forward to watching the on demand movies for free. But I was disappointed when I was met by the message "does not support this type of flash". Is there an update or an app I can use? Lovefilm uses Flash Player 10.
View 7 Replies View RelatedI've been trying to update my phone now for nearly two weeks, trying various options, yet nothing I do helps in any way.I started off just running the update from SEUS with my phone as i've been using it.the updater started, gets about 70% through "Preparing" and pops up an error "Unable to install or start software update components." Closing which pops up "try again" or come to this site.I then tried uninstalling all installed components, same result as above.I then tried a Master Reset to factory setting, same result as above.I then disable the Firewall and the Anti-Virus, same result as above.Basically, i'm at the end of my tether, this should not be this difficult, I should not have to jump through this amount of hoops.If there was a way to legitimately root the phone (keeping warranty), I could already have Froyo installed, instead of this irritating mess thats causing me nothing but headaches.
View 4 Replies View RelatedHow to start my LG Optimus Net P690 in recovery and downloading mode?
Which is the latest stock firmware available for my LG Optimus Net, my PC suite is always showing that no new version is available, but I am having 2.3.6 in my Galaxy POP while in LG its 2.3.4. LG Optimus Net is actually launched later than the galaxy POP...
Where I can find the LG stock firmwares? Is there any Custom ROMs available for LG Optimus Net P690?
I really have no use for it otherwise. I would like to be able to click on it and have camera pop up if possible.
View 3 Replies View RelatedI want to record and then upload that on server using camera but without any notification. Is their any way to start camera programmatically in video mode with screen remain off?
View 1 Replies View RelatedIs this possible? I'm trying to make an automated script without any user interaction. I can select sideload mode manually using the volume and power buttons when in ClockworkMod Recovery, however I want to enter sideload mode using the command prompt from my computer.
View 2 Replies View RelatedWell i flashed befor and my son was playing with my phone and he let the verison patch come on top of my rooted phone.. well i still have super user but it will not let me do anything stop all of my wifi tether ect. ok well i go to re flash my phone and now it will not let me flash it. It just stops at the start.
The error code i get is (0x7100)
I had install the latest flash player on my android ICS 4.0.3. I tried to play facebook games such as Marvel Avengers Alliance but when it start to load the game, the browser crash to the main screen of my smartphone.
View 4 Replies View RelatedIs there a way of telling the phone with apps (not necessary for the proper functioning of the phone) start at start-up and which don't? I hate for unnecessary apps to auto start.
View 1 Replies View RelatedI'm trying to use the camera in an Android app using the 1.5 API. I want the camera to flash for every picture. However, when I looked at the API for camera.parameters, the setFlashMode() method is only supported for 2.0 and higher. Yet my Cliq XT, which runs 1.5, has a flash that I can set in the menu - I take this to mean there is a way to do this for the 1.5 API, though I was unable to find it.Does anyone know how to set the flash mode using the 1.5 API?
View 1 Replies View RelatedI have a problem with my google tv , MK808B
It doesn't boot
I have black screen after "android"
It seem to be a real one, not a fake, I open it and see it on another site, with pictures from the real and the fake
I try to flash another firmware, but I can't put it in flash mode, when I press reste button and connect to usb from otg to my pc, my pc doesn't detect mk800b
I used this app on my original Motorola Droid and loved it, but I have noticed some problems with it on the Incredible. I'm wondering if it's just me or if anyone else has had these problems as well.
1. LED Light does not change color. No matter what color I set the LED light to in the Handcent app, it always just blinks green. This isn't necessarily a huge deal, but I liked having my text messages blink a different color than my emails and other notifications.
2. LED light does not always blink and screen does not turn on. I noticed that the LED light only flashes once in a while, no matter what type of blink setting I choose. Also, the screen does not turn on when I get a text even though I have the box checked that is supposed to enable the screen to turn on despite having the popup box disabled. Once again, not a huge deal, but it would be nice if these things worked since I got used to these features on the Droid.
3. Phone does not vibrate at all when in Vibrate mode. Ok, this one is a huge deal. No matter which vibrate settings I choose, the phone will not vibrate when I receive a text if the phone is in vibrate mode. I am missing tons of texts now because I need to have my phone silent for most of the day. I checked the recent reviews of the app and didn't see anyone complain about this, so I don't know if there is just something wrong with my phone or if the app just isn't very compatible with the Incredible.
I recently bought a Pearl Touchlet X10 quad core (PX-8880-675) tablet, but it was full of mods and when i plugged in the charger i received the "plugged in, not charging" message. So i started to clean up the ROM. Finally it showed charging, but now i really messed it up, beacuse now it is not booting. The tablet was not factory software, another tablet software on it that has a volume rocker. To start the flash mode i need the volume up button, but this version of tablet does not have this button. I tried the home button version, but it is not working because of the different firmware.
Here's the thing:The tablet always starts recovery mode, no screen, but adb working. When i type "ls /dev/block" in ADB shell it shows loop0-loop7 and nandf, so it is not seeing the nand I have seen other forums that when I type "dd if=/dev/zero of=/dev/block/nanda" it will erase the nand, and the tablet is force booting into fel mode (flash mode), but it not erasing beacuse the recovery is not for this tablet and it not seeing the nand.
I've got a Chinese phone Pomp W89 and I wanted to put a custom rom on it, I tried to install cwm and twrp but I've found out they don't support my device, so I went on needrom and found a recovery file for my phone which I downloaded and used rom manager to flash.
But I've then worked out the file was corrupted and since then I can't get into recovery mode the phone just showed a brief white screen then boots up normally, it does say recovery mode at the bottom but never goes into it, I then found a complete recovery file for my phone and flashed that but the same thing happens without the brief white screen just a black one then it boots up normally.
I've tried cwm to flash and several other programs and I also then tried the terminal emulator to flash which I think was successful but the exact same thing happens, I just don't understand if the new recovery.img has been flashed why would nothing change? There was already a recovery.img on the phone which I kept a copy of and that makes no difference either.
I was going to flash using my computer but I have windows 8 and can't get the usb drivers to install for the phone.
Just bought a Vibrant off of CL. I got it unlocked and it seems to be running well off of AT&T. I had a few questions though.
1) Whenever it is in the sleep/standby mode it will randomly flash on. I won't get any new emails or txt messages but it does stay on for a while until the screen timeout period ends
2) It does display a "Refreshing SIM data" message at the bottomish area every few minutes. Is this normal or is this an AT&T thing...
3) I was able to reset everything from going to the Settings>privacy>factory data reset but the instructions for a hard reset of "turning on the phone while holding down the volume down button" did not work. Has anyone been able to pull this off?
All in all I'm pretty jazzed about the phone. I like the Swype typing a lot as well as the overall speed and app installs. I'm coming from a work iPhone and an old school bar phone that could only call and txt. My wife has a iPhone4 and even though the facetime feature is nice I still don't like the restrictiveness of Apple products.
i am not able enter flash mode in my X10i device i wanted to flash kernel.
I followed all the procedure:
1) by holding back button & plugged in USB cable.
2) my phone got recognized in the flash tool. Got a message stating "Device connected in flash mode"
3) then my device did not stay much longer in flash mode (less then 10 sec). After that it automatically booted to phone charging screen.
below is log generated in flash tool, when i tried to flash the kernel:
26/026/2013 07:26:07 - INFO - Selected kCernel-CM9-v03.ftf
26/026/2013 07:26:07 - INFO - Preparing files for flashing
26/026/2013 07:26:07 - INFO - Please connect your device into flashmode.
[Code]....
I have a completely broken screen/lcd/digitizer on my Samsung Galaxy S3, debug mode was not on. The phone works as it will still vibrate when turned on and the LED / Menu / Back buttons light up during a boot. USB connector works as well. The phone was not previously rooted.
I had most important data on the sd card and I've already wrote off any other data on the phone as I've since moved on to a GN2. I would like to make use of the S3 (not necessarily as a phone but a server, security camera, etc.). I've read several posts here about my options and looked at numerous google articles, all seem to require debug mode being on or assume/require the data/OS must remain as this is what the user is trying to recover. I do not care if all data is lost on the phone, I just want to make the device useful again.
Am I out of luck if debug mode was not enabled or can I flash through adb via some obscure mechanism? Also note that fastboot is not an option here as the S3 (samsung) does not have it enabled. I am unable to get into "Download Mode" as I cannot see info on the screen.
I deleted /system folder on my nexian cosmic journey. And now my nexian is stuck...
I try to using fastboot mode to flash recovery image, but my device seems not detected. I already installed the android composite driver, but when i use "fastboot devices" command, it shows (?) So how the heck to get my nexian back to normal?..
Or perhaps, if i just be able to put back the /system folder to its place again, it would be more easy to recover it... But how access the root when phone is like that?
I'm following step by step process to root my gt-s5310 using ODIN 3.07. Started from download mode and connect to the PC is no problem at all. ODIN finished with the GREEN PASS. When I tried to open recovery mode, only android recovery mode is open(but malfunctioning, going no where when I press the home button) that recovery mode also don't has "install zip from sd card" option.
My android version is 4.1.2 . Baseband version S5310DXAME2. Kernel version 3.0.15-1521875 se.infra@SWDA2309#1
Attached is the recovery mode picture